Losi 8ight 4.0 Standard Parts
Team Losi Racing Clutch Rebuild/Service Box (LOSA9100)
This is the Clutch Rebuild/Service Box from Team Losi Racing for their 8ight buggy & 8ight-T Truggy.
This set includes:- Composite Clutch Shoes (4)
- Aluminium Clutch Shoes (4)
- Clutch Nut, 1/8 (1)
- Spacer, 1/8 4 Shoe Clutch (2)
- 3 x 6mm Button Head Screw, Zinc (4)
- 3 x 8mm Flat Head Screw (4)
- Shim, 5 x 7 x.2mm (12)
- Flywheel Collet (4)
- Clutch Screw, 4 Shoe (16)
- Crank Spacer Washer (2)
- Clutch Spring, .040 Diameter (8)
- Clutch Spring, .040 Diameter (8)
- Clutch Spring, .036 Diameter (8)
- Clutch Spring, .036 Diameter (8)
- Ball Bearing, 5x10x4 HD (2)
- Ball Bearing, 5x13x4 HD (2)
- Instructions (1)
- Plastic Box (1)
- Losi Sticker (1)
- Scotchbrite pad (1)
Over 80 parts included in a handy storage box
Out of Stock
$126.95 Inc Tax
Team Losi Racing Adjustable Rear Hinge Pin Brace/Inserts: 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA1755)
This is an Adjustable Front Hinge Pin Brace and inserts from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.
This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.
Features
This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.
Features
- Machined from massive 6mm thick aircraft grade aluminium
- Hard anodize coated for long lasting good looks
- Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
- Rear Brace facilitate Toe adjustment from 1-3°, and Anti-Squat from 2-4°
- Quickly change out the adjustment cams for 0.5° increment adjustments
- Adjustment cams are available separately and can be replaced quickly and easily
- Higher roll center for better support in the rear and turn initiation when using stock caster blocks.
Fits TLR 8ight 2.0, 3.0 & 4.0 buggies and truggies
Out of Stock
$59.95 Inc Tax
Team Losi Racing Adjustable Front Hinge Pin Brace/Inserts: 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA1754)
This is an Adjustable Front Hinge Pin Brace and inserts from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.
This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.
Key Features:
This hinge brace has been machined from 6mm aircraft grade aluminium, and hard anodized for durability. This plate has been redesigned from the previous version. It is now a solid plate, and eliminates the holes in the brace for greater reliability. This brace set with inserts includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments.
Key Features:
- Machined from massive 6mm thick aircraft grade aluminium
- Hard anodize coated for long lasting good looks
- Includes 16 adjustment cams for quick and easy Toe, Anti-Squat, and Kick-Up adjustments
- Quickly change out the adjustment cams for 0.5° increment adjustments
- Front Brace allows Kick-Up adjustment from -2° to +2° from standard
- Adjustment cams are available separately and can be replaced quickly and easily
Fits TLR 8ight 2.0, 3.0 & 4.0 buggies and truggies
Team Losi Racing Mod 1 Center Differential Spur Gear (46T):8IGHT (LOSA3551)
This is a 46 Tooth Mod 1 Center Differential Spur Gear from Team Losi Racing for their 8IGHT Buggies and truggies.
Fits all TLR 8IGHT Buggies and truggies
Team Losi Racing 16mm Shock Nuts & O-rings (4): 8IGHT 3.0 / 4.0 / X / T / PM-MX (TLR243045)
This is a packet of (4) 16mm Shock Nuts & O-rings from Team Losi Racing compatible with all their 16mm Shocks.
Fits all TLR 16mm Shocks
Out of Stock
$42.50 Inc Tax
Team Losi Racing Front/Rear CV Driveshafts (2) :8IGHT 2.0, 3.0 & 4.0 Buggy (LOSA3535)
This is a pair of (2) CV Driveshafts from Team Losi Racing compatible for the front and back of their 8IGHT 2.0, 3.0 and 4.0 Buggies.
NOTE: Do not fit Truggies.
NOTE: Do not fit Truggies.
Fits most TLR 1/8 buggies
Team Losi Racing Mod 1 Center Differential Spur Gear (45T):8IGHT (LOSA3552)
This is a 45 Tooth Mod 1 Center Differential Spur Gear from Team Losi Racing for their 8IGHT Buggies and truggies.
Fits all TLR 8IGHT Buggies and truggies
Team Losi Racing Front & Rear Gear Box Set: 8ight / 8ight-T 2.0/3.0/4.0 (TLR242013)
This is a Front & Rear Gear Box Set from Team Losi Racing compatible with their 8ight family of vehicles, and have been molded from a stiffer material to deliver a more consistent gear mesh under load.
Packet Include:
Packet Include:
- 1 x front gear box halves
- 1 x rear gear box halves
- 2 x rear gear box bearing inserts
Full set of gearbox cases
Out of Stock
$38.95 Inc Tax
Team Losi Racing 16mm Aluminium 16mm Bleeder Shock Caps (2): 8IGHT 4.0 / T (TLR243034)
This is a packet of (2) Aluminium 16mm Bleeder Shock Caps from Team Losi Racing compatible with their 8IGHT 4.0 Buggies and 8IGHT-T 4.0 Truggies.
Fits all TLR 16mm Shocks
Losi Rear Differential Ring Gear: 8B (LOSA3510)
This is a Rear Differential Ring Gear from Team Losi Racing for their 8ight racing Buggy.
Does not fit Truggy Kit
Team Losi Racing Aluminium Covered 17mm Wheel Nuts (Hard Anodized) (4): 8IGHT (All) (TLR3538)
This is a packet of (4) Hard Anodized Aluminium Covered 17mm Wheel Nuts from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
Fits all TLR 1/8 Racing buggies and truggies
Team Losi Racing Front/Rear CV Driveshaft Axles (2): 8IGHT 4.0 / T (TLR242017)
This is a packet of (2) Front/Rear CV Driveshaft Axles from Team Losi Racing compatible with their 8ight 4.0 and XE buggies & truggies.
Fits TLR 8IGHT 4.0 nitro & electric buggies and truggies
Out of Stock
$34.95 Inc Tax
Team Losi Racing Front Differential Ring Gear: 8ight 2.0/3.0/4.0 (LOSA3509)
This is a Front Differential Ring Gear from Team Losi Racing for their 8IGHT 1.0 / 2.0 / 3.0 / 4.0 racing buggies.
Does not fit the truggy diff
Team Losi Racing Fuel Tank: 8IGHT 4.0 Buggy (TLR241019)
This is a replacement Fuel Tank from Team Losi Racing for their Nitro 8IGHT 4.0 racing buggy.
Keep fuel tanks in good condition to maintain engine tune
Team Losi Racing 16mm Tapered Shock Piston Set (1.3mm/1.2-1.3 Split): 8IGHT 3.0 / 4.0 / X / T (TLR243029)
This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Packet Includes:
Packet Includes:
- 2 x 1.3 x 8 hole piston
- 2 x "split" pistons that have four 1.3 holes and four 1.2 holes
Fits all TLR 16mm Shocks
Team Losi Racing 1/8 Air Filter Set: 8B, 8T (LOSA9150)
This is a 1/8 Air filters Set from Team Losi Racing for their 8ight range of Buggies and Truggies.
Also fits most other brand Nitro Buggies.
Also fits most other brand Nitro Buggies.
Popular replacement for other brands
Out of Stock
$29.95 Inc Tax
Team Losi Racing 16mm 5-Hole Machined Piston Set (1.4 & 1.5mm): 8IGHT 3.0 / 4.0 / X / T (TLR243023)
This is a packet of (4) 16mm 5-hole Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Packet Includes:
The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.
Packet Includes:
- 2 x five 1.4mm hole pistons
- 2 x five 1.5mm hole pistons
The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm Tapered Shock Piston Set (1.4/1.5mm): 8IGHT 3.0 / 4.0 / X / T (TLR243030)
This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Packet Includes:
Packet Includes:
- 2 x 1.4 x 5 tapered hole pistons
- 2 x 1.5 x 5 tapered hole pistons
Fits all TLR 16mm Shocks
Team Losi Racing Steering Rack Set with Hardware: 8IGHT 3.0 / 4.0 (TLR244005)
This is a Steering Rack Set with Hardware from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies & 8IGHT-T 3.0 and 4.0 Truggies.
Fits 8ight 3.0 / 4.0 Buggies & Truggies
Team Losi Racing 4x21mm TiCN Hinge Pins (2): 8IGHT/8IGHT-T 4.0 (TLR244027)
This is a packet of (2) 4x21mm TiCN Hinge Pins from Team Losi Racing for their 8ight 4.0 family of vehicles.
Designed for the TLR 8ight 4.0 vehicles
Team Losi Racing 4x21mm TiCn Hinge Pin Set (2): 8ight & 8ight-T 3.0 & 4.0 (TLR244007)
This is a packet of (2) 4x21mm TiCn Hinge Pins from Team Losi Racing for their 8ight 3.0 & 4.0 racing buggies and Truggies.
Fits 8ight & 8ight-T 3.0 & 4.0 Models
Team Losi Racing Wheel Hexes + 2mm Wider (4): 8IGHT/8IGHT-T (LOSA3532)
This is a packet of (4) Wheel Hexes + 2mm Wider from Team Losi Racing compatible with their 8ight family of vehicles Using these hexes will add 4mm of track width over the stock hexes.
Features:
Features:
- Increase "track" width while staying legal
- Machined from aircraft-quality aluminium alloy
- Black-anodized to distinguish them from stock hexes
- Uses standard wheel nuts and retaining pins
Fits most TLR 8ight vehicles
Team Losi Racing Front Center Dogbone (95.5mm): 8ight 4.0 / XE (TLR242016)
This is a 95.5mm Front Center Dogbone from Team Losi Racing compatible with their 8ight 4.0 and XE Buggies.
95.5mm dog bone
Team Losi Racing Aluminium Rear Gearbox Bearing Inserts: 8IGHT 2.0 / 3.0 / 4.0 /T (LOSA4454)
This is a Bellcrank & Servo Saver Set from Team Losi Racing compatible with their 8IGHT family of vehicles.
Does not fit the 8ight-X models
Does not fit the 8ight-X models
Key Features:
- High-durability aluminium allows inserts to be used for the life of the vehicle
- Hard anodized to improve durability and be resistant against scratching
- Left- and right-side inserts key into gear box to disallow any rotation of the inserts that can cause drivetrain failure
- Laser-etching identification designates inserts for 2.0 gear boxes only
- .1 and .25mm shims included for differential shimming
Fits TLR 8ight 2.0, 3.0 & 4.0 vehicles
Team Losi Racing Differential Gear & Shaft Set: 8IGHT (All) (LOSA3502)
This is a Differential Gear & Shaft Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
This packet contains all the gears and pins to rebuild one differential.
This packet contains all the gears and pins to rebuild one differential.
Fits all TLR 1/8 Racing buggies and truggies
Team Losi Racing 16mm Shock Boot Set (8): 8IGHT 3.0 / 4.0 / X (TLR243031)
This is a packet of (8) 16mm Shock Boots from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm Shock Boot Set (8) (TLR243032)
This is a packet of 4 front and 4 rear 16mm Shock Boots from Team Losi Racing compatible with their 8ight family of vehicles.
Includes 4 front and 4 rear shock boots
Out of Stock
$22.95 Inc Tax
Team Losi Racing Rear Suspension Arm Set (2): 8IGHT 3.0 / 4.0 (TLR244008)
This is a packet of (2) Rear Suspension Arms from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies.
Fits 8ight 3.0 / 4.0 Buggies
Team Losi Racing Axle Boot Set (TLR242018)
This is an Axle Boot Set from Team Losi Racing suitable for most of their 1/8 buggies and truggies since 4.0.
These are used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.
Packet includes:
These are used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.
Packet includes:
- 4 x axle boots
- 4 x boot retainer rings
- 2x center driveshaft coupler boots
Maintenance time?
Team Losi Racing Axle Boot Set: 8IGHT 4.0 / 8IGHT-X/XE/XT/XTE (TLR242018)
This is a packet of Axle Boots from Team Losi Racing for their 8IGHT 4.0, 8IGHT-X, and 8IGHT-X Elite Buggies and 8IGHT-XT/XTE Truggies, used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.
Package includes:
Package includes:
- 4x axle boots
- 4x boot retainer rings
- 2x center driveshaft coupler boots
Fits 1/8 TLR kits from 8IGHT 4.0
Aluminium Covered (1/8) 17mm Wheel Nuts (Black) (4) (KRNL007A)
This is a packet of (4) 1/8 17mm Black Covered Wheel Nuts which will fit most 1/8 scale buggies and truggies.
Fits most 1/8 Racing buggies and truggies
Team Losi Racing 15 Degree Front Spindle Set: 8IGHT/8IGHT-T 4.0 (TLR244024)
This is a 15 Degree Front Spindle Set from Team Losi Racing for their 8ight 4.0 family of vehicles.
These are the standard replacement adjustable front spindles that allow you to tune dog bone plunge by using the included washers to adjust the spindle height. Package includes right and left side spindles, as well as four spindle height adjustment washers.
Packet includes:
These are the standard replacement adjustable front spindles that allow you to tune dog bone plunge by using the included washers to adjust the spindle height. Package includes right and left side spindles, as well as four spindle height adjustment washers.
Packet includes:
- 1 x right side spindle
- 1 x left side spindle
- 4 x spindle height adjustment washers
Designed for the TLR 8ight 4.0 vehicles
Team Losi Racing 15 Degree Front Spindle Carrier Set: 8IGHT/8IGHT-T 4.0 (TLR244023)
This is a 15 Degree Front Spindle Carrier Set from Team Losi Racing for their 8ight 4.0 family of vehicles.
Packet includes:
Packet includes:
- 1 x right side spindle carrier
- 1 x left side spindle carrier
- 4 x spindle hinge pin washers
Designed for the TLR 8ight 4.0 vehicles
Out of Stock
$18.75 Inc Tax
Team Losi Racing Front Suspension Arm Set (2): 8IGHT 3.0 / 4.0 (TLR244000)
This is a packet of (2) Front Suspension Arms from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies.
Fits 8ight 3.0 / 4.0 Buggies
Team Losi Racing Front/Rear Differential Pinion Gear :8IGHT 2.0 / 3.0 / 4.0 / X / XE Buggy (LOSA3508)
This is a Differential Pinion Gear from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies.
NOTE: This does not fit the TLR 8IGHT Truggy.
NOTE: This does not fit the TLR 8IGHT Truggy.
Fits all TLR 8IGHT Buggies
Team Losi 6x10x3mm Rubber Sealed Ball Bearing (4) (LOSA6946)
This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.
This set includes:
This set includes:
- Four 6x10x3mm bearings
Four 6x10x3mm bearings
Team Losi Racing Bellcrank & Servo Saver Set: 8ight 2.0, 3.0 & 4.0 (LOSA4406)
This is a Bellcrank & Servo Saver Set from Team Losi Racing compatible with their 8IGHT family of vehicles.
Does not fit the 8ight-X models
Does not fit the 8ight-X models
Fits TLR 8ight 2.0, 3.0 & 4.0 vehicles
Out of Stock
$15.95 Inc Tax
Team Losi Racing 4x59.5mm TiCn Shock Shaft: 8IGHT 3.0 / 4.0 / T (TLR243007)
This is a 4x59.5mm TiCn Shock Shaft from Team Losi Racing for the rear of their 8IGHT 3.0 & 4.0 1/8 buggies and front of their 3.0 & 4.0 1/8 truggies.
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Titanium carbon-nitride coated
Team Losi Racing 16mm Shock Bladders (4): 8IGHT 3.0 / 4.0 / X / T (TLR243004)
This is a packet of (4) 16mm Shock Bladders from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing Shock Cap Bushing (4) : 8ight 4.0 (TLR243033)
This is a packet of (4) Shock Cap Bushing from Team Losi Racing compatible with the 16mm bleeder caps (TLR243034) found on their 8ight 4.0 vehicles.
Fits TLR 8ight 4.0 vehicles
Team Losi Racing 16mm Shock Cap Bushing (4): 8IGHT 3.0 / 4.0 / X / T (TLR243033)
This is a packet of (4) 16mm Shock Cap Bushings from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm 1.3mm Shock Pistons (2): 8IGHT 3.0 / 4.0 / X / T (TLR243011)
This is a packet of (2) 16mm 1.3mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm 1.2mm Shock Pistons (2): 8IGHT 3.0 / 4.0 / X / T (TLR243010)
This is a packet of (2) 16mm 1.2mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm Split Shock Pistons (2): 8IGHT 3.0 / 4.0 / X / T (TLR243012)
This is a packet of (2) 16mm Split Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.
These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.
Fits all TLR 16mm Shocks
Team Losi Racing Rear Hub Set: 8IGHT/8IGHT-T 4.0 (TLR244022)
This is a Rear Hub Set from Team Losi Racing which was included on their 8ight 4.0 family of vehicles but could fit 2.0 & 3.0 versions if you change the outer bearing to the larger 8x16x5mm size.
Designed for the larger 8x16x5mm bearings
Team Losi Racing Center Dogbone: 8IGHT 3.0/4.0/X (TLR242002)
This is a replacement Center Dogbone from Team Losi Racing used in the center/rear position on the Losi 8ight 3.0/4.0 & X, and the center/front position on the 8IGHT-E 3.0.
Losi center dogbones eliminate the friction of a CV coupler and reduce the bind caused after the CV coupler wears.
Losi center dogbones eliminate the friction of a CV coupler and reduce the bind caused after the CV coupler wears.
Less binding than CV style driveshaft
Team Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing (4) (LOSA6948)
This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm Flanged Bearings
Four 8x14x4mm flanged bearings
Team Losi Racing Shock Spring Cup (4): 8IGHT 3.0 / 4.0 / T (TLR243009)
This is a packet of (4) Shock Spring Cup from Team Losi Racing compatible with their 8IGHT 3.0 & 4.0 Buggies and Truggies.
For TLR 8IGHT 3.0 & 4.0 buggies & truggies
Team Losi 5x11x4mm Rubber Sealed Ball Bearing (4) (LOSA6947)
This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 5x11x4mm bearings
Four 5x11x4mm bearings
Team Losi Racing Droop Screw (4) (TLR245000)
This is a packet of (4) Droop Screws from Team Losi Racing suitable for most of their 1/8 buggies and truggies.
These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.
These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.
Fits most of TLR 1/8 kits
Team Losi Racing Coupler Outdrive: 8IGHT 3.0 / 4.0 / T (TLR242003)
This is a Coupler Outdrive from Team Losi Racing for their 8IGHT 3.0 & 4.0 1/8 buggy and truggy.
Replace as drive slot wears
Team Losi Racing Gearbox Shims (20):8IGHT (All) (LOSA4452)
This is a packet of (20) Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.
This set of Gear Box Shims includes:
This set of Gear Box Shims includes:
- 10 x 14x17x.25mm Shims
- 10 x 14x17x.10mm Shims
Fits all TLR 8IGHT Buggies and truggies
Out of Stock
$10.50 Inc Tax
Team Losi Racing 5mm Low Friction Moly Rod End Set (8): 8B, 8T (TLR344015)
This is a packet of (8) 5mm Low Friction Moly Rod Ends from Team Losi Racing compatible with their 8ight family of vehicles.
When compared to the kit black rod ends these new Low Friction Moly rod ends do not bind up under loading allowing the suspension to be more plush creating a quicker more stable car.
When compared to the kit black rod ends these new Low Friction Moly rod ends do not bind up under loading allowing the suspension to be more plush creating a quicker more stable car.
Reduces binding under load
Team Losi Racing Shock End, Cup & Bushing Set: 8IGHT 2.0/3.0/4.0 (LOSA5435)
This is a Shock End, Cup & Bushing Set from Team Losi Racing for most of their 8IGHT racing buggies.
NOTE: The spring cups included in this packet are not compatible with the Losi 16mm shocks included with the 8IGHT 3.0/4.0 vehicles. The rod ends, rod end pivot balls and shock cap bushings are compatible with the 8IGHT 3.0/4.0, but the 3.0/4.0 uses the TLR243009 16mm spring cups.
Fits most TLR 8ight models
Out of Stock
$10.50 Inc Tax
Team Losi Racing 8.8mm Suspension Balls: 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA6049)
This is a packet of (4) 8.8mm Suspension Balls from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits most TLR 1/8 vehicles
Team Losi Racing Differential Seal Set: 8B, 8T (LOSA3505)
This is a packet of Differential gaskets and seals from Team Losi Racing for their 8ight range of Buggies and Truggies.
Packet includes:
Packet includes:
- 3 x Differential Gaskets
- 6 x Differential outdrive seals
Enough for all 3 differentials
Team Losi Racing Drive Pin Set: 8IGHT (All) (LOSA3518)
This is a Drive Pin Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.
Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.
Fits all TLR 1/8 Racing buggies and truggies
Out of Stock
$9.95 Inc Tax
Team Losi Racing .250 & .500 Wing Spacer Set: 8ight & 8ight-T 2.0 3.0 4.0 (TLR244010)
This is a .250 & .500 Wing Spacer Set from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0, 3.0 & 4.0.
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
- 2x .250 spacers
- 2x .500 spacers
Use to tune the wing position
Team Losi Racing 3.5mm Outer Hinge Pin Set: 8IGHT 2.0 (LOSA6503)
This is a packet of (2) 3.5mm Outer Hinge Pin Set from Team Losi Racing compatible with their 8IGHT family of vehicles.
Fits most TLR 8ight vehicles
Out of Stock
$9.50 Inc Tax
Team Losi Racing Lower Shock Cap Seals (4) & X-Ring Seals (8): 8IGHT 3.0 / 4.0 / X / T (TLR243024)
This is a packet of (4) Lower Shock Cap Seals & (8) X-Ring Seals from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing Brake Pad & Screw Set :8IGHT 2.0 / 3.0 / 4.0 / T (LOSA3546)
This is a Brake Pad & Screw Set from Team Losi Racing for their 8IGHT 2.0, 3.0 and 4.0 Nitro buggies & truggies.
Fits most TLR 1/8 nitro buggies & truggies
Team Losi Racing Ackerman Shoulder Screw (2) (TLR244006)
This is a packet of (2) Ackerman Shoulder Screws from Team Losi Racing compatible with their 8ight 3.0 & 4.0 vehicles or other models that are running the Ball raced Ackerman Plate.
Fits TLR 3.0 & 4.0 vehicles
Team Losi Racing Tri-Horn (Gen III Radio Tray) (TLR4406)
This is a Tri-Horn from Team Losi Racing compatible with their 8ight 3.0 & 4.0 vehicles or other models that are running the Gen III Radio Tray.
Fits TLR 3.0 & 4.0 vehicles
Team Losi Racing 5mm Rod End Set (8): 8B, 8T (LOSA6047)
This is a packet of (8) 5mm Rod Ends from Team Losi Racing compatible with their 8ight family of vehicles.
Fits TLR 8ight 2.0, 3.0 & 4.0 vehicles
Out of Stock
$8.50 Inc Tax
Team Losi Racing Pinion Bearing Spacer (4): 8IGHT 4.0 / T / X (TLR242019)
This is a packet of (4) Pinion Bearing Spacer from Team Losi Racing compatible with their 8ight 4.0 and 8IGHT-X buggies & truggies.
Fits TLR 8IGHT 4.0 and X buggies and truggies
Team Losi Racing Brake Caliper Springs (4): 8ight / 8ight-T (TLR242005)
This is a packet of (4) Brake Caliper Springs from Team Losi Racing for their 8IGHT 3.0 & 4.0 1/8 buggy and truggy.
These are the springs that are installed in between the brake calipers.
These are the springs that are installed in between the brake calipers.
Helps to prevent brakes from grabbing
Team Losi Racing Adjustable Hinge Pin Brace Insert Set: 8IGHT (All) (LOSA1756)
This is a Packet of (16) Adjustable Hinge Pin Brace Inserts from Team Losi Racing for their 8IGHT family of racing Buggies and Truggies.
Fits all TLR 8ight racing kits
Team Losi Racing Differential Shims (6x11x.2mm):8IGHT (All) (LOSA3501)
This is a packet of (12) 6x11x.2mm Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.
Fits all TLR 8IGHT Buggies and truggies
Out of Stock
$6.50 Inc Tax
Team Losi Racing Tuned Pipe Mount & Hardware (LOSA9165)
This is a tuned pipe mount from Team Losi Racing compatible with their 8ight family of vehicles.
Will likely fit most 1/8 Nitro vehicles
Team Losi Racing Front Suspension Arm Bushing (4): 8IGHT 3.0 / 4.0 (TLR244001)
This is a packet of (4) Front Suspension Arm Bushings from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies & 8IGHT-T 3.0 and 4.0 Truggies.
Fits 8ight 3.0 / 4.0 Buggies & Truggies
Team Losi Racing 6.8mm Steering Ball Set: 8ight 2.0, 3.0 & 4.0 (LOSA6050)
This is a 6.8mm Steering Ball Set from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits 8ight 2.0, 3.0 & 4.0 vehicles
Team Losi Racing Front/Rear CV Driveshaft Coupling Set (2): 8ight & 8ight-T 2.0/3.0/4.0 (LOSA3523)
This is a packet of (2) F/R CV Driveshaft Coupling Sets from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0, 3.0 & 4.0.
These couplers are to be used for the front or rear of the buggy.
These couplers are to be used for the front or rear of the buggy.
Replace regularly to keep your transmission smooth
Out of Stock
$5.50 Inc Tax
Team Losi Racing Metal Servo Arm Insert (2) (25T - Futaba) (LOSA99043)
This is a packet of (2) Metal Servo Arm Inserts from Team Losi Racing intended for use with Futaba, ProTek R/C, Highest, Savox, and Orion servos, as well as any servo that uses a 25T spline pattern.
These inserts are installed over the steering and throttle servo output shafts.
These inserts are installed over the steering and throttle servo output shafts.
Fits all 1/8 TLR Kits
Team Losi Racing Steering Post (2): 8ight 2.0, 3.0 & 4.0 (LOSA4408)
This is a packet of (2) Steering Post from Team Losi Racing compatible with their 8IGHT family of vehicles.
Does not fit the 8ight-X models
Does not fit the 8ight-X models
Fits TLR 8ight 2.0, 3.0 & 4.0 vehicles
Team Losi Racing 16mm Shock Piston Washer Set (8): 8IGHT 3.0 / 4.0 / X / T ( Copy ) (TLR243014)
This is a packet of (8) 16mm Shock Piston Washers from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
Fits all TLR 16mm Shocks
Team Losi Racing Front Suspension Arm Bushings (4): 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA1701)
This is a packet of (4) Front Suspension Arm Bushings from Team Losi Racing compatible with their 8IGHT 2.0/3.0/4.0 family of racing buggies and truggies.
Fits TLR 8ight 2.0, 3.0 & 4.0 vehicles
Team Losi Racing Front Chassis Brace Set: 8ight & 8ight-T 2.0 3.0 4.0 (LOSA4413)
This is a Front Chassis Brace Set from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0, 3.0 & 4.0.
Fits 8ight & 8ight-T 1.0/2.0/3.0/4.0 Models
- 1