Kyosho MP10T Nitro Truggy Parts

Sort By:  
Uses (2) 5x10x4 Clutch Bearings
$44.95  Inc Tax
Complete set of bearings
$44.95  Inc Tax
Long lasting shoes for 3 shoe clutch
$32.50  Inc Tax
2 wickerbills included for high or low downforce
$29.95  Inc Tax
Very common Nitro clutch bearings
$21.75  Inc Tax
Half the weight of the standard Avid 10th wing buttons
$17.95  Inc Tax
Half the weight of the standard Avid 10th wing buttons
$17.95  Inc Tax
Half the weight of the standard Avid 10th wing buttons
$17.95  Inc Tax
Underside serrated grip to help keep your wing secure
$17.95  Inc Tax
Includes 0.1mm, 0.2mm & 0.3mm shims
$13.95  Inc Tax
Keep your 1/8 springs safe and tidy
$10.50  Inc Tax
Pin to attach the wheel hubs
$5.95  Inc Tax
Kyosho High Quality Clutch Bell (13T) (KYO 97035-13)
This is a High Quality 13T Clutch Bell from Kyosho.
Uses (2) 5x10x4 Clutch Bearings
$44.95  Inc Tax
Avid Racing Concepts Bearing Kit: Kyosho MP9 / MP10 (AVD KYO-MP9)
This is a full bearing kit by Avid RC for the Kyosho MP9.

Bearing Kit fits:
  • Kyosho MP9
  • Kyosho MP9 TKI2
  • Kyosho MP9 TKI3
  • Kyosho MP9 TKI4
  • Kyosho MP10

Bearing Kit Includes:
  • 14 x 8x16x5 Revolution Bearings
  • 4 x 5x11x4 Revolution Bearings
  • 4 x 6x10x3 Revolution Bearings
  • 2 x 5x10x4 Revolution Bearings


Complete set of bearings
$44.95  Inc Tax
Kyosho Carbon Clutch Shoes (3) (KYO IFW52)
This is a packet of (3) Carbon Clutch Shoes from Kyosho designed to fit all thier 1/8 off road vehicles, and can be found on select DBX vehicles as well.

These shoes last a long time, and you can fine tune the way the clutch engages by trimming about 1-2mm of the end of the clutch shoes, or by using different clutch springs.

Package includes:
  • 3 x clutch shoes
  • 1 x washer


Long lasting shoes for 3 shoe clutch
$32.50  Inc Tax
Kyosho 1/8 Plastic Wing (Black): MP9 TKI4 (KYO IF491BK)
This is the replacement Black Plastic Wing from Kyosho included with the MP9 TKI4 Buggy Kit.

Packet includes:
    1. (1) Black Kyosho 1:8 Wing
    2. (2) Wickerbills
    3. Wickerbill Hardware (high and low downforce)
2 wickerbills included for high or low downforce
$29.95  Inc Tax
Kyosho 5x10 metal shielded clutch bearings (4) (KYO BRG001)
This is a packet of (4) 5x10 metal shielded clutch bearings from Kyosho included in most of their nitro powered kit.

Very common Nitro clutch bearings
$21.75  Inc Tax
Avid Racing Concepts Triad Wing Mount Buttons (2) (Black) (AVD 1060-BLK)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.

By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.


Features:
  • Aluminium anodized, silver cut highlights, and the Avid logo laser etched
  • Minimal weight design, 0.3g/ea
  • M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
  • Available in black, blue, red, green, pink, orange, hard anodize, or purple

Includes:
  • 2 x Wing Mount Buttons
  • 1 x Avid Mini Decal Sheet 


Half the weight of the standard Avid 10th wing buttons
$17.95  Inc Tax
Avid Racing Concepts Triad Wing Mount Buttons (2) (Blue) (AVD 1060-BLU)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.

By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.

Features:
  • Aluminium anodized, silver cut highlights, and the Avid logo laser etched
  • Minimal weight design, 0.3g/ea
  • M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
  • Available in black, blue, red, green, pink, orange, hard anodize, or purple

Includes:
  • 2 x Wing Mount Buttons
  • 1 x Avid Mini Decal Sheet 


Half the weight of the standard Avid 10th wing buttons
$17.95  Inc Tax
Avid Racing Concepts Triad Wing Mount Buttons (2) (Green) (AVD 1060-GRN)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.

By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.

Features:
  • Aluminium anodized, silver cut highlights, and the Avid logo laser etched
  • Minimal weight design, 0.3g/ea
  • M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
  • Available in black, blue, red, green, pink, orange, hard anodize, or purple

Includes:
  • 2 x Wing Mount Buttons
  • 1 x Avid Mini Decal Sheet 


Half the weight of the standard Avid 10th wing buttons
$17.95  Inc Tax
Avid Racing Concepts 1/8 Wing Mount Buttons (2) (Red) (AVD 1805-RED)
This is a packet of (2) RED 1/8th Wing Mount Buttons from Avid RC.

They are anodized red and designed with an aerodynamic profile to avoid upsetting airflow to the rear spoiler, and most importantly, the under-side has serrated grippers to help keep your wing secure.

The serrated bottom also prevents the button from twisting your new wing wrap causing the lamination to separate from the decal layer. Basically, they stop you from looking like a bucky with dirt in between the layers of your "pro" wing wrap.

These parts fit almost every buggy and truggy wing on the market. For those racers with “less than perfect” wing mount holes, the serrated teeth grip the wing so that you can over-size the hole to straighten your wing and it will stay in place.

Features:
  • Anodized red with serrated teeth.
  • 12mm Button Head Screws included to complete the low drag aero effect

Includes:
  • 2 x Wing Mount Buttons
  • 2 x Button Head M3x12mm screws
  • 1 x Avid Mini Decal Sheet 


Underside serrated grip to help keep your wing secure
$17.95  Inc Tax
Kyosho 5x7mm Clutch Shims (30) (KYO 96643)
This is a packet of (30) 5x7mm shims from Kyosho used for shimming the clutch bell bearings, and can be used with any brand of clutch system.

Packet includes:
  • 10 x 5x7x0.1mm shims
  • 10 x 5x7x0.2mm shims
  • 10 x 5x7x0.3mm shims
Includes 0.1mm, 0.2mm & 0.3mm shims
$13.95  Inc Tax
Avid Racing Concepts Spring Tube Pack (8th Off-Road) (4) (AVD 1203-TUBE)

This is a packet of (4) 8th scale spring tubes.

Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.

Dimensions:

  • Outside: Dia. 33.3mm X Ht. 98.6mm
  • Inside: Dia. 28.4mm X Ht. 96.5mm



Keep your 1/8 springs safe and tidy
$10.50  Inc Tax
Kyosho 2.6x17mm Wheel Pins (4): MP9/MP10/ST-RR (KYO IF110)
This is a packet of (4) 2.6x17mm Wheel Pins from Kyosho for their MP9 & MP10 1/8 Scale Buggy and ST-RR Truggy Kits.

Pin to attach the wheel hubs
$5.95  Inc Tax
Per Page      1 - 12 of 12
  • 1