Tamiya "TB" Range Car Parts
Tamiya 1/10 MCLAREN SENNA Body Parts Set (Clear) (TAM 51693)
This body parts set recreates McLaren Senna. It is made of polycarbonate with mirror and wing detail pieces made of PC-ABS plastic.
• Lightweight, durable polycarbonate body realistically captures the complex, aerodynamically honed form of the McLaren Senna.
• Black ABS resin plastic parts realistically depict side mirrors and rear wing.
• Includes marking stickers, and window masking stickers for use during the painting process.
• Comes in a smart, dedicated cardboard box.
Specifications:
• Lightweight, durable polycarbonate body realistically captures the complex, aerodynamically honed form of the McLaren Senna.
• Black ABS resin plastic parts realistically depict side mirrors and rear wing.
• Includes marking stickers, and window masking stickers for use during the painting process.
• Comes in a smart, dedicated cardboard box.
Specifications:
- Compatible with TT-01, TT-01 Type-E, TT-02 (excluding TT-02B, and TT-02T), TC-01, TA06, TA07, TA08 and TB-05 chassis cars.
- Requires TAMIYA PS paint to paint.
Includes wing mirror and stickers
Tamiya 1/10 Porsche 911 Carrera Body Parts Set (Clear) (TAM 51543)
This is a clear 1/10 scale Porsche Carrera 911 RSR Race Car polycarbonate body from Tamiya,
Specifications:
Specifications:
- Compatible with Tamiya TT-01, TT-01 Type-E and TT-02 chassis (short wheelbase)
- Molded polycarbonate construction
- ABS molded plastic side mirrors, black in color
- Stick sheet with body trim and sponsor logos
Includes window masks and stickers
Out of Stock
$69.95 Inc Tax
Tamiya 1/10 Subaru WRX STI NBR Body Parts Set (Clear) (TAM 51593)
This is a complete polycarbonate body parts set of the Subaru WRX STI NBR from Tamiya designed to fit any of their 190mm wide touring car platforms.
Specifications:
Specifications:
- Made of durable polycarbonate material.
- Comes with marking stickers to depict numerous sponsor logos.
- Separately-molded side mirror parts and wing parts included, plus window masking stickers.
- Compatible with 257mm wheelbase touring car chassis.
Includes wing mirror and stickers
Tamiya 1/10 1991 Audi V8 Touring Car Body Parts Set (Clear) (TAM 51653)
This is a complete polycarbonate body parts set of the 1991 Audi V8 Touring Car from Tamiya.
Specifications:
Specifications:
- 1/10 scale R/C body parts set assembly kit.
- Polycarbonate material.
- Also included are stickers recreating the 1991 Frank Biela No.45 car, and window masking stickers for use in the painting process.
- Compatible with TT-02, TB-04, TB-05, TA06 and TA07 chassis cars.
- NOTE: 257mm wheelbase and narrow tread setup are required.
Includes wing mirror and stickers
Out of Stock
$69.95 Inc Tax
Tamiya 1/10 Nissan NISMO R34 GT-R Body Parts Set (Clear) (Z-Tune) (TAM 51246)
This is a complete polycarbonate body parts set of the Z-Tune Nissan NISMO R34 GT-R from Tamiya.
Specifications:
Specifications:
- Compatible with TA05, TT-01, TGS, TNS, TB-02, TB Evolution IV, TRF415.
- Requires TAMIYA PS paint to paint.
Includes wing mirrors and stickers
Out of Stock
$69.95 Inc Tax
Tamiya 1/10 FORD GT MKII Body Parts Set (Clear) (TAM 51664)
This is a complete polycarbonate body parts set of the FORD GT MKII from Tamiya.
Specifications:
Specifications:
- The ulta-honed form of the car is captured by a lightweight, durable polycarbonate body. Front light cases and buttress are crafted separately in polycarbonate as well
- Separate injection molded parts (black) are included to recreate rear wings, side mirrors and swing stopper.
- Comes with livery marking stickers for decoration, and window masking tape for use in the painting process.
- Use the specific wing stays (Item 54510 or 54773) when attaching optional rear wings.
- Compatible with TT-01, TT-01 Type-E, TT-02 (except for TT-02B and TT-02T), TB-05 PRO, TA06, TA07 PRO (see modification video here: https://youtu.be/uP4suL9JpwY), TA08 PRO and TC-01 (remove A3) chassis cars which are 257mm wheelbase.
- Requires TAMIYA PS paint to paint.
Includes wing mirror and stickers
Out of Stock
$69.95 Inc Tax
Tamiya 1/10 Ford Mustang Body Parts Set (Clear) (TAM 51614)
This is a FORD Mustang GT4 from Tamiya. It is designed to fit in any of Tamiya’s 190mm wide touring car machines.
Specifications:
Specifications:
- Made from lightweight yet durable polycarbonate.
- Front and rear light cases are also molded in polycarbonate.
- Separately molded plastic components depict rear wing and side mirrors.
- Comes with stickers to create markings, plus masking stickers for use when painting.
- Compatible with 257mm wheelbase touring car chassis (TT-02, TB-04, TB-05, TA06, TA07, etc.).
- Requires TAMIYA PS paint to paint.
Includes wing mirror and stickers
Tamiya 1/10 Raikiri GT Body Parts Set (Clear) (TAM 51585)
This is a clear polycarbonate body of the Raikiri. The body is an imagination concept by the industrial design company Znug Design, Inc. based in Japan.
The body comes complete with vinyl stickers to complete the window trim, headlights, tail lights and other livery markings. A handy window masking seal is also included for easy masking of the windows when painting your body.
Specifications:
The body comes complete with vinyl stickers to complete the window trim, headlights, tail lights and other livery markings. A handy window masking seal is also included for easy masking of the windows when painting your body.
Specifications:
- Lightweight and tough polycarbonate body with marking stickers.
- Racing Wing set A (Item 54457) included, with wing stay mounts allowing different aero setups.
- Comes with window masking stickers for painting.
- Compatible with TT-01, TT-02, TB-04, TA-05 and TA06 chassis cars.
- 190mm width
Includes window masks and stickers
Out of Stock
$69.95 Inc Tax
Tamiya 1/10 Toyota Gazoo Racing WRT/Yaris WRC Body Parts Set (Clear) (TAM 51608)
This body parts set recreates Toyota Gazoo Racing WRT/Yaris WRC. It is made of clear polycarbonate and is designed to fit Tamiya’s 190mm rally car machines.
• The Yaris WRC body is made out of vacuum formed polycarbonate. Individual polycarbonate parts recreating front canards, front light cases and rear bumper blocks complete the package.
• Separately molded plastic components depict rear wing and side mirrors.
• Stickers are included to recreate markings, as are masking stickers for use when painting.
Specifications:
• The Yaris WRC body is made out of vacuum formed polycarbonate. Individual polycarbonate parts recreating front canards, front light cases and rear bumper blocks complete the package.
• Separately molded plastic components depict rear wing and side mirrors.
• Stickers are included to recreate markings, as are masking stickers for use when painting.
Specifications:
- Compatible with 257mm TT-01, TT-02 and XV-01 chassis cars.
- Requires TAMIYA PS paint to paint.
Includes wing, mirrors and stickers
Universal RC Assortment Set (500 pieces) (SCREWBOX-LGE)
This is a 500 piece Metric Universal RC Assortment Set.
Package Include:
Compatible with:
Most RC Model Cars,such as Traxxas, Associated, Tamiya, Axial, Arrma, Losi, HPI, Kyosho, HSP, etc.
Package Include:
- 500 Piece assortment of M3 & M4 Screws (Flat head & Round head, Hex Drive),M3 Flat washers, 3mm & 4mm Lock Nuts Body Clips, E-clips,Pins, O-rings.
- Handy plastic storage case (Approx 175 x 100 x 21mm)
Compatible with:
Most RC Model Cars,such as Traxxas, Associated, Tamiya, Axial, Arrma, Losi, HPI, Kyosho, HSP, etc.
Nuts, Bolts, E-Clips, Body Clips, O rings etc
Tamiya 42mm Blue Aluminium Swing Shafts (2): TRF414M & TB-Evolution II (TAM 53502)
This is a packet of (2) 42mm Blue Aluminium Swing Shafts from Tamiya for the Universal Shaft Set Assembly in their TRF414M, and TB-Evolution II 4WD on-road racing chassis.
Included in Packet:
May fit other TRF and TB models, please check manual for compatibility.
Included in Packet:
- Two swing shafts 42mm long
- One instruction sheet
May fit other TRF and TB models, please check manual for compatibility.
May fit other TRF and TB models
Protoform Anti-Tuck Body Stiffeners (2) for 190mm Touring Cars (PRO 1721-00)
This is a packet of (2) polycarbonate Anti-Tuck Body Stiffeners from Protoform for a 190mm Touring car body.
Make body tucking a thing of the past.
Metric M3 Screw and Washers Set (340 pieces) (SCREWBOX-SML)
This is a 340 piece Metric M3 Screw and Washers Set
Package Include:
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Package Include:
- 340 M3 Screws of various sizes from 6mm to 12mm
- M3 & M4 Washers
- 1 x Handy plastic storage case
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Includes a handy plastic storage case
Tamiya "A" Parts (Carbon Reinforced Gear Case): TB-03 (TAM 54098)
This is a Carbon Reinforced Gear Case Set from Tamiya for their TB-03 4WD on-road racing chassis but also fit a number of other models. check manual for compatibility.
The carbon reinforced gear case are lighter and more rigid than the standard parts supplied in the kit. Drive efficiency improves due to the greater rigidity of the gear case.
The carbon reinforced gear case are lighter and more rigid than the standard parts supplied in the kit. Drive efficiency improves due to the greater rigidity of the gear case.
Also fits other TB models
Tamiya 5X5mm Aluminium Ball Connector (5) (TAM 53906)
This is the packet of (5) 5x5mm blue anodised aluminium Ball Connectors from Tamiya for almost all of their vehicles.
Use to adjust position of upper arm on competition-ready R/C chassis.
Use to adjust position of upper arm on competition-ready R/C chassis.
Reduce weight and look great
Tamiya Aluminium Servo Step Screws (4) (Blue) (TAM 54862)
This is the packet of (4) Blue Anodised Aluminium Servo Step Screws from Tamiya for almost all of their vehicles.
Securely attach your servos and add some colour with these blue Aluminum step screws.
Securely attach your servos and add some colour with these blue Aluminum step screws.
- Aluminum Step Screws x4
- Step screws cater to holes between 4.5mm and 5mm, and do not require washers, meaning that they give a great fit and save maintenance time.
- Hex holes ensure tight attachment.
- Some servos may only require 2 screws.
Reduce weight and look great
Tamiya Touring Car Large Diameter Short Spring Set (4 Pairs) (20mm) (TAM 42306)
This is a packet of (3 Pairs) or Tuned Short Shock Springs from Tamiya for 1/10 On-road vehicles.
These 20mm springs are perfectly suited to TRF Super Short Big Bore Dampers.
Included in packet:
These 20mm springs are perfectly suited to TRF Super Short Big Bore Dampers.
Included in packet:
- 2x Super Soft Springs
- 2x Soft Springs
- 2x Medium Springs
Suited to TRF Super Short Big Bore Dampers.
Tamiya Anodised Turnbuckle Wrench (Blue) (TAM 53602)
This is the Blue Anodised Turnbuckle Wrench from Tamiya for almost all of their vehicles.
This is a dedicated, compact tool for the adjustment of your turnbuckle shafts. Features just the right thickness of material for easy adjusting. Has a stylish blue anodized finish.
This is a dedicated, compact tool for the adjustment of your turnbuckle shafts. Features just the right thickness of material for easy adjusting. Has a stylish blue anodized finish.
Add some bling to toolbox
Tamiya Aluminium Turnbuckle Shafts (2) (Blue) (3x32mm) (TAM 54249)
This is the packet of (2) Blue Anodised 3x32mm Aluminium Turnbuckle Shafts from Tamiya for almost all of their 1/10 On-road vehicles.
Features:
Compatible Chassis:
TT-02 Type-S, TA07 PRO, TA06, TA06 PRO, TA06 MS, TB-04, TB-04 PRO, FF-04 EVO, TRF419, TRF419X, TB Evo.7, TB Evo.6, TB Evo.6 MS, MF-01X & RM-01 Chassis
Features:
- Turnbuckle shafts allow adjustment of length without removing adjusters.
- These components are crafted in lightweight and durable aluminum.
- Parts feature a stylish blue anodized finish.
Compatible Chassis:
TT-02 Type-S, TA07 PRO, TA06, TA06 PRO, TA06 MS, TB-04, TB-04 PRO, FF-04 EVO, TRF419, TRF419X, TB Evo.7, TB Evo.6, TB Evo.6 MS, MF-01X & RM-01 Chassis
Reduce weight and look great
Tamiya Aluminium Turnbuckle Shafts (2) (Blue) (3x42mm) (TAM 54250)
This is the packet of (2) Blue Anodised 3x42mm Aluminium Turnbuckle Shafts from Tamiya for almost all of their 1/10 On-road vehicles.
Features:
Compatible Chassis:
TT-01, TA05, TB-03, FF-03, TRF415, TRF416, TB Evo.5, Chassis
Features:
- Turnbuckle shafts allow adjustment of length without removing adjusters.
- These components are crafted in lightweight and durable aluminum.
- Parts feature a stylish blue anodized finish.
Compatible Chassis:
TT-01, TA05, TB-03, FF-03, TRF415, TRF416, TB Evo.5, Chassis
Reduce weight and look great
Yeah Racing Aluminium High Downforce Body Posts (Blue) (YR YA-0199V2BU)
This is a packet of (2) Blue Aluminium High Downforce Body Posts from Yeah Racing designed to transfer the wings down-force more efficiently through the rear body posts.
Increase your cars traction through enhancing rear down-force. Recommended for use on high speed tracks with a low to medium traction surface.
In order to tune the down force and stability on the road there are 2 sets of clipping holes 6mm apart on the Hi Down-force Body Post. Providing an optional position adjustment of the body shell from 4mm gap to 2mm gap therefore to increases or decreases the down-forces more accurately.
Features:
Increase your cars traction through enhancing rear down-force. Recommended for use on high speed tracks with a low to medium traction surface.
In order to tune the down force and stability on the road there are 2 sets of clipping holes 6mm apart on the Hi Down-force Body Post. Providing an optional position adjustment of the body shell from 4mm gap to 2mm gap therefore to increases or decreases the down-forces more accurately.
Features:
- For: 4mm to 5mm Body Post
- Material: Aluminium
- Color: Blue
- 2x High Down-Force Body Post
- 2x Set Screws
Increase rear traction on your 1/10 Touring car
Out of Stock
$14.50 Inc Tax
Tamiya Aluminium Hi-Torque Servo Saver Cap (Blue) (TAM 54863)
This is the Blue Anodised Aluminium Hi-Torque Servo Saver Cap from Tamiya for almost all of their vehicles.
Ensure that your servo is well protected with this durable and lightweight aluminum cap for use with TAMIYA hi-torque servo savers.
• Aluminum Hi-Torque Servo Saver Cap x1
• This cap is for use in place of Q4 parts in TAMIYA hi-torque servo savers, providing good durability.
• Blue anodized finish, with the TAMIYA name laser-engraved.
Ensure that your servo is well protected with this durable and lightweight aluminum cap for use with TAMIYA hi-torque servo savers.
• Aluminum Hi-Torque Servo Saver Cap x1
• This cap is for use in place of Q4 parts in TAMIYA hi-torque servo savers, providing good durability.
• Blue anodized finish, with the TAMIYA name laser-engraved.
Add some bling to your ride
Ride RC Wing Attachment Set (Black) (RRC 28038)
This is an adjustable rear wing mount from Ride RC designed to provide an easy “All-in-One” wing attachment solution.
Features:
Packet Includes:
Features:
- Combined height and angle adjustment capability.
- Provides a strong wing attachment with optimum downforce transfer wing / bodyshell.
- Installation is possible on any bodyshell, with or without built-in wing post.
Packet Includes:
- 2x Upper plate
- 2x Flat plate
- 2x Angle plate type B
- 2x M3×8 Countersunk
- 2x M3×8 buttonhead
- 2x T-Plate
- 2x Angle plate type A
Allows you to adjust your 1/10 wing height
Out of Stock
$9.95 Inc Tax
Tamiya Gear Differential Unit Bevel Gear Set: TB-04 (TAM 51549)
This is a Bevel Gear Set from Tamiya for the Gear Differential Unit in their TB-04 4WD on-road racing chassis.
May also fit a number of other models. check manual for compatibility.
May also fit a number of other models. check manual for compatibility.
May fit other TB models
Tamiya "C" Parts (Carbon Reinforced Front Upright): TRF418/419 (TAM 54568)
This is a pair of Carbon Reinforced Front Upright from Tamiya for their TRF418 4WD on-road racing chassis but also fit a number of other models. check manual for compatibility.
Also fits some TB models
Out of Stock
$9.95 Inc Tax
Avid Racing Concepts Spring Tube Pack (10th On-Road) (4) (AVD AV1205-TUBE)
This is a packet of (4) 10th scale touring spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 24.9mm X Ht. 38.1mm
- Inside: Dia. 20.3mm X Ht. 35.3mm
Keep your 1/10 Touring springs safe and tidy
Yeah Racing Carbon Body Wing Protector (2) (YR YA-0278G)
This is a packet of (2) carbon fibre plates designed to protect the body of 1/10 touring car where the rear wing mounts
Features:
Features:
- For: On Road Cars
- Color: carbon fibre
Strengthen your 1/10 On-Road Body
Yeah Racing Chassis Tweak Adjustment Washer (10) (Black) (YR WR-0009BK)
This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
- Compatible to all graphite plate chassis design
- Material: Aluminum & Rubber
- Color: Black
- 10x O-Ring Washer
- 10x O-Ring
Avoid Chassis Tweak on 1/10 On-road cars
Yeah Racing Chassis Tweak Adjustment Washer (10) (Light Blue) (YR WR-0009BU)
This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.
Features:
- Compatible to all graphite plate chassis design
- Material: Aluminium & Rubber
- Color: Blue
- 10x O-Ring Washer
- 10x O-Ring
Avoid Chassis Tweak on 1/10 On-road cars
- 1