Bearing Kits
Avid Racing Concepts Bearing Kit (Ceramic): TLR 3.0/4.0/5.0/2.0T/3.0T/4.0T (AVD AVLOSI-22-CER)
This is a full Ceramic bearing kit by Avid RC for the Team Losi Racing 3.0 / 4.0 / 5.0 Buggies and 2.0T / 3.0T / 4.0T Stadium trucks.
The Revolution Ceramic Series bearings are a low friction bearing with several options to help satisfy anyone's desire. Instead of the steel balls they use silicone nitride ceramic balls (Si3N4).
A ceramic can spin at higher rpms with less drag and the life of the bearing is far greater than a steel bearing but in our industry we suggest that you maintain them with oil or grease every half-gallon to a gallon for the longest life possible. Another benefit to ceramics is the weight difference in the balls allowing for less rotating mass.
Bearing Kit fits:
Bearing Kit Includes:
The Revolution Ceramic Series bearings are a low friction bearing with several options to help satisfy anyone's desire. Instead of the steel balls they use silicone nitride ceramic balls (Si3N4).
A ceramic can spin at higher rpms with less drag and the life of the bearing is far greater than a steel bearing but in our industry we suggest that you maintain them with oil or grease every half-gallon to a gallon for the longest life possible. Another benefit to ceramics is the weight difference in the balls allowing for less rotating mass.
Bearing Kit fits:
- TLR 22 3.0
- TLR 22 4.0
- TLR 22 5.0 DC
- TLR 22 5.0 SR
- TLR 22T 2.0
- TLR 22T 3.0
- TLR 22T 4.0
Bearing Kit Includes:
- 10 x 5x10x4 Ceramic Revolution Bearings
- 2 x 5x13x3 Ceramic Revolution Bearings
- 6 x 5x8x2.5 Ceramic Revolution Bearings
- 2 x 10x15x4 Ceramic Revolution Bearings
Lower friction with less rotating mass
Avid Racing Concepts Bearing Kit: TLR 8ight / 8ight T 4.0 (AVD AVLOSI-840)
This is a full bearing kit by Avid RC for TLR 8ight 4.0 including the (2) 4x8x3 Flanged steering rack bearings or the (2) 5x10x4 and (2) 3/32 x 3/16 throttle linkage bearings.
Bearing Kit fits:
Bearing Kit Includes:
Bearing Kit fits:
- 8ight 4.0
- 8ight-T 4.0
Bearing Kit Includes:
- 6 x 8x14x4 Flanged Revolution Bearings
- 4 x 1/2 X 3/4 X 5/32 Revolution Bearings
- 4 x 8x16x5 Revolution Bearings
- 4 x 6x10x3 Revolution Bearings
- 4 x 5x11x4 Revolution Bearings
- 2 x 3/32 X 3/16 X 3/32 Metal Bearings
- 2 x 5x10x4 Revolution Bearings
- 2 x 4x8x3 Flanged Rubber Bearings
- 1 x 5x10x4 Metal Clutch Bearings
- 1 x 5x13x4 Metal Clutch Bearings
Complete set of bearings
Out of Stock
$49.95 Inc Tax
Avid Racing Concepts Bearing Kit: TLR 8ight X (AVD AVLOSI-8X)
This is a full bearing kit by Avid RC for the TLR 8ight X.
Bearing Kit fits:
Bearing Kit Includes:
Bearing Kit fits:
- 8ight X
Bearing Kit Includes:
- 6 x 8x14x4 Flanged Revolution Bearings
- 8 x 8x16x5 Revolution Bearings
- 4 x 6x10x3 Revolution Bearings
- 2 x 5x11x4 Revolution Bearings
- 2 x 5x13x4 Revolution Bearings
- 2 x 3/32 X 3/16 X 3/32 Metal Bearings
- 1 x 5x10x4 Metal Clutch Bearings
- 1 x 5x13x4 Metal Clutch Bearings
Complete set of bearings
Out of Stock
$49.95 Inc Tax
Avid Racing Concepts Bearing Kit: Kyosho MP9 / MP10 (AVD AVKYO-MP9)
This is a full bearing kit by Avid RC for the Kyosho MP9.
Bearing Kit fits:
Bearing Kit Includes:
Bearing Kit fits:
- Kyosho MP9
- Kyosho MP9 TKI2
- Kyosho MP9 TKI3
- Kyosho MP9 TKI4
- Kyosho MP10
Bearing Kit Includes:
- 14 x 8x16x5 Revolution Bearings
- 4 x 5x11x4 Revolution Bearings
- 4 x 6x10x3 Revolution Bearings
- 2 x 5x10x4 Revolution Bearings
Complete set of bearings
Out of Stock
$44.95 Inc Tax
Avid Racing Concepts Bearing Kit: TLR 8ight XE (AVD AVLOSI-8XE)
This is a full bearing kit by Avid RC for the TLR 8ight XE.
Bearing Kit fits:
Bearing Kit Includes:
Bearing Kit fits:
- 8ight XE
Bearing Kit Includes:
- 6 x 8x14x4 Flanged Revolution Bearings
- 8 x 8x16x5 Revolution Bearings
- 4 x 6x10x3 Revolution Bearings
- 2 x 5x11x4 Revolution Bearings
- 2 x 5x13x4 Revolution Bearings
Complete set of bearings
Out of Stock
$42.50 Inc Tax
Avid Racing Concepts Bearing Kit: TLR 3.0/4.0/5.0/2.0T/3.0T/4.0T (AVD AVLOSI-22)
This is a full bearing kit by Avid RC for the Team Losi Racing 3.0 / 4.0 / 5.0 Buggies and 2.0T / 3.0T / 4.0T Stadium trucks.
Bearing Kit fits:
Bearing Kit Includes:
Bearing Kit fits:
- TLR 22 3.0
- TLR 22 4.0
- TLR 22 5.0 DC
- TLR 22 5.0 SR
- TLR 22T 2.0
- TLR 22T 3.0
- TLR 22T 4.0
Bearing Kit Includes:
- 10 x 5x10x4 Revolution Bearings
- 2 x 5x13x3 Revolution Bearings
- 6 x 5x8x2.5 Metal Bearings
- 2 x 10x15x4 Revolution Bearings
Complete set of bearings
Out of Stock
$39.95 Inc Tax
Avid Racing Concepts Bearing Kit: TLR 22-4 2.0 (AVD AVLOSI-22-4 2.0)
This is a full bearing kit by Avid RC for the Team Losi Racing 22-4 2.0 Buggies.
Bearing Kit fits:
Bearing Kit Includes:
Bearing Kit fits:
- TLR 22-4 2.0
Bearing Kit Includes:
- 4 x 10x15x4 Revolution Bearings
- 4 x 3/16 X 3/8 X 1/8 Revolution Bearings
- 3 x 5x8x2.5 Metal Bearings
- 2 x 5x13x4 Revolution Bearings
- 2 x 5x10x4 Revolution Bearings
- 4 x 5x10x3 Revolution Bearings
- 1 x 7x11x3 Metal Bearings
Complete set of bearings
Avid Racing Concepts Bearing Kit: TT-02 (AVD AVTT02)
This is a full Ball Bearing set of from AVID Racing Concepts for the Tamiya TT-02 On-Road vehicles.
This ball bearing set replaces all plastic bushings with ball bearings resulting in a more efficient drive-train enabling faster speeds and higher durability.
Change out the Plastic Bearings for Metal for better performance and run time.
Packet Includes:
This ball bearing set replaces all plastic bushings with ball bearings resulting in a more efficient drive-train enabling faster speeds and higher durability.
Change out the Plastic Bearings for Metal for better performance and run time.
Packet Includes:
- 8 x 1050 Ball bearings
- 4 x 1150 Ball bearings
- 4 x 1280 Ball bearings
Complete set of bearings
Out of Stock
$32.00 Inc Tax
Team Losi 8x16x5mm Rubber Sealed Ball Bearing (4) (LOSA6942)
This is a packet of (4) 8mm x 16mm x 5mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x16x5mm bearings
Four 8x16x5mm bearings
Team Losi 6x12mm Sealed Ball Bearing (4) (LOSA6940)
This is a packet of (4) 6x12mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 6x12mm bearings
Four 6x12mm bearings
Out of Stock
$19.95 Inc Tax
Team Losi 8x14x4mm Rubber Sealed Ball Bearing (4) (LOSA6945)
This is a packet of (4) 8mm x 14mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm bearings
Four 8x14x4mm bearings
Team Losi 6x10x3mm Rubber Sealed Ball Bearing (4) (LOSA6946)
This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.
This set includes:
This set includes:
- Four 6x10x3mm bearings
Four 6x10x3mm bearings
Team Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing (4) (LOSA6948)
This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm Flanged Bearings
Four 8x14x4mm flanged bearings
Team Losi 5x11x4mm Rubber Sealed Ball Bearing (4) (LOSA6947)
This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 5x11x4mm bearings
Four 5x11x4mm bearings
Team Losi Clutch Bearing Set (LOSA6949)
This is the replacement clutch bearing set for the Losi 8IGHT buggy.
This set includes:- One 5x10x4mm bearing
- One 5x13x4mm bearing
(5x13x4mm & 5x10x4mm)
Avid Racing Concepts Clutch Bearing Set | (2) 5x10x4 Metal (AVD AV-CL-510)
This is a packet of (2) clutch bearings from Avid Racing Concepts.
Product Overview
The 5x10x4 Avid Clutch Bearing Set is designed to withstand all of the torture you throw at them. AVID RC decided to stop trying to find a happy medium of a single bearing to cover both clutches and wheels. Clutch temperatures easily reach three (3) times more than that of a wheel bearing. In order to make this bearing more suitable for high temps and insane loads, several things had to be adjusted.- First, the balls are 20% larger than the AVID RC standard $2 bearing.
- Second, the depth of the grooves is much deeper so that there is a massive increase in the surface area for the larger balls.
- Third, the grooves are polished more than our standard bearing for a smoother surface which ensures the balls have the least amount of friction when experiencing those high loads.
- Lastly, the metal ribbon cage is replaced with nylon like our Aura and Engine Bearings which are 9-time IFMAR World Champions. This removes the metal to metal drag during high heat expansion.
Tips
Simply use an air compressor to blow the sides of each bearing for five (5) seconds and wipe the grease with a towel that comes out of the other side. The reason why this is done is that the clutch gets VERY hot. The heat ends up melting the grease and flinging it onto your clutch bell causing the shoes to slip and exponentially raising the temperature within the clutch. Within minutes, your bearings will have melted off all of the lubricants. The temperature, being twice what it should be, causes the metal to expand, the bearing to bind, and ultimately, fail.Specifications
- Specifically designed for use in clutches to withstand the high heat and loads.
- Balls are 20% larger than our standard bearing line and when combined with the deeper grooves in the races, you get a ton more surface area to distribute the load.
- Grooves are made from 52100 and polished to a higher level of smoothness to keep friction down when at higher loads.
- Cages are made from nylon instead of steel so that during high heat expansion situations there is no chance of metal to metal rubbing which results in less drag, and better strength.
- Includes: (2) 5x10x4 Metal Clutch Bearings
20% larger balls and modified cage
Avid Racing Concepts Clutch Bearing Set | 5x10x4 / 5x13x4 Metal (AVD AV-CL-51013)
This is a packet of (2) clutch bearings from Avid Racing Concepts.
Product Overview
The 5x10x4 & 5x13x4 Avid Clutch Bearing Set is designed to withstand all of the torture you throw at them. AVID RC decided to stop trying to find a happy medium of a single bearing to cover both clutches and wheels. Clutch temperatures easily reach three (3) times more than that of a wheel bearing. In order to make this bearing more suitable for high temps and insane loads, several things had to be adjusted.- First, the balls are 20% larger than the AVID RC standard $2 bearing.
- Second, the depth of the grooves is much deeper so that there is a massive increase in the surface area for the larger balls.
- Third, the grooves are polished more than our standard bearing for a smoother surface which ensures the balls have the least amount of friction when experiencing those high loads.
- Lastly, the metal ribbon cage is replaced with nylon like our Aura and Engine Bearings which are 9-time IFMAR World Champions. This removes the metal to metal drag during high heat expansion.
Tips
Simply use an air compressor to blow the sides of each bearing for five (5) seconds and wipe the grease with a towel that comes out of the other side. The reason why this is done is that the clutch gets VERY hot. The heat ends up melting the grease and flinging it onto your clutch bell causing the shoes to slip and exponentially raising the temperature within the clutch. Within minutes, your bearings will have melted off all of the lubricants. The temperature, being twice what it should be, causes the metal to expand, the bearing to bind, and ultimately, fail.Specifications
- Specifically designed for use in clutches to withstand the high heat and loads.
- Balls are 20% larger than our standard bearing line and when combined with the deeper grooves in the races, you get a ton more surface area to distribute the load.
- Grooves are made from 52100 and polished to a higher level of smoothness to keep friction down when at higher loads.
- Cages are made from nylon instead of steel so that during high heat expansion situations there is no chance of metal to metal rubbing which results in less drag, and better strength.
- Includes: (1) 5x10x4 and (1) 5x13x4 Metal Clutch Bearings
20% larger balls and modified cage
- 1