Kyosho Nitro Kits

Sort By:  
Typical Kyosho high quality race kit
$1,495.00  Inc Tax
Typical Kyosho high quality race kit
$875.00  Inc Tax
$1,495.00
Kyosho INFERNO MP10 TKi3 1/8 GP 4WD Racing Buggy Kit (KYO 33026B)
World’s greatest car continues the fight with overwhelming speed

This is the 1/8 Nitro Inferno MP10 TKi3 1/8 GP 4WD Racing Buggy Kit from Kyosho.

The 1/8 scale GP Buggy is one of the most popular R/C car racing categories in the world. As the benchmark for competitiveness, the Inferno Series has led development through continued innovation, encouraging efforts by other manufacturers to improve their machines year by year.

Based on the existing MP10 TKI2, the latest TKI3 Inferno model incorporates components and design elements that were developed for the 2022 IFMAR (International Model Car Federation) World Championships.

By changing the body design, the TKI3 can adapt to a wide range of track layouts, from technical circuits with tight corners to high-speed courses typically found in Europe. Adjustable wing height also expands the range of aerodynamic settings. Thicker gauge wire in new suspension springs was introduced for the World Championships for tighter cornering control.

In addition, a review of the drive system incorporated a smaller center differential with revised gear ratio and a lighter spur gear plus 3-piece clutch to improve throttle response.

The MP10 TKI3 is now more capable and more adaptable to different types of course layouts, not only for high-level competition, but also just for the fun of driving very fast. Whether you are competing at the highest level or simply enjoying an R/C car in its purest form, the TKI3 exceeds all expectations.


Features:
  • The Inferno MP10 continues on its evolutionary path, boasting achievements in major races including the World Championships.
  • Shaft-type 4WD delivers higher speed with superior reliability. Reduction ratio can be changed for compatibility with high-speed circuits.
  • Optimal front-to-rear weight balance realizes superior maneuverability by positioning heavier components towards the front of the chassis. 
  • Newly designed body with advanced aerodynamic performance increases cornering speed and can be used interchangeably with the existing TKI2 body. 
  • Equipped with wing spacers for adjusting wing height to change handling characteristics for optimal maneuverability.
  • Downsized center differential realizes improved throttle response.
  • Newly developed springs for long diaphragm-type front and rear oil shocks deliver superior suspension stability.
  • Unassembled kit includes wheels, body and wing.
  • Hard-type wheels deliver improved stability on high-speed circuits and over rough surface gaps.

Included in Kit:

  • Unassembled chassis kit
  • Special wheels
  • Wing
  • Special clear body
  • Window mask seal
  • Logo decals
  • Fuel tube
  • Linkage parts
  • Clutch parts
  • Air cleaner
  • Ring gear grease
  • 1.5, 2.0, 2.5mm Hexagonal wrench
  • Cross wrench 
  • Wheel wrench

Needed to Complete:
  • 1x LiPo Receiver Pack
  • 1x LiPo Charger
  • 1x Nitro Race Fuel
  • 1x Glow Driver
  • 1x 2-channel 2-servo R/C system for cars
  • 1x Set of 1/8 Scale Off Road Buggy Tires
  • 1x Competition .21 Engine and Exhaust Pipe
  • 1x Nitro Starter box
  • Diff, shock and air filter oil
  • Paint for car body
  • Tools





Typical Kyosho high quality race kit
$1,495.00  Inc Tax
Kyosho INFERNO ST-RR Evo.2 1/8 GP 4WD Truggy Competition Race Kit (KYO 33004)
This is the 1/8 Nitro Inferno ST-RR Evo.2 Racing Truggy from Kyosho.

Even with so many truggy race victories, the Inferno ST maintains its dominance through continuous evolution. The word Truggy was created from the combination of Truck & Buggy and is a category born from the fusion of stadium truck running power with the high-speed performance of racing buggies.

For Truggy success, pursuit of reliability and durability is paramount. The ability to customize settings is also required for the race-winning edge. The RR-Evo.2 achieves this with newly designed front & rear shocks stays that suit high-grip surfaces and optional radio box set with lightweight clutch bell included as standard to boost running power.

The tough straight cut bevel gears and small flywheel from the 1/8 buggy world champion MP9 deliver increased reliability while the dial-adjustable big bore shocks allow for precision setting. The low-profile form of the new forward cabin design body combines with the MP9 wing to produce sure-footed rear grip and maneuverability. 

Features:
  • 3-differential shaft drive full time 4WD Inferno ST-RR Evo.2 is equipped with even more advanced racing specifications.
  • Newly designed front & rear shock towers optimize mounting positions for greater compatibility with various surfaces.
  • Radio box set moves the CG forward for sharper cornering.
  • Lightweight clutch bell delivers superior accelerator response.
  • Equipped with M-size dial-adjustable big bore shocks on front and L-size on rear.
  • Specially designed aerodynamic body and large MP9 wing produce superior stability and movement.
  • Diff gears feature straight cut bevel gears made from special hardened steel.
  • Features the same brake disk as Inferno MP9 to deliver awesome braking power and stability.
  • Large surface area but lightweight thin mudguards installed on rear suspension arms.
  • Lightweight flywheel realizes sharp acceleration.
  • Main chassis and aluminum parts are anodized in gun metallic for strength & style.
  • Stabilizers and universal joints are installed on front and rear.
  • Uses hinge pin with flange and nylon nuts to secure outer side of lower sus. Allows for easy removal and maintenance.
  • Strength and rigidity of 7075-grade Duralumin shock stays provide reliability against the big shocks from the jump landings.
  • Large bumper provides protection for the front suspension holders and lower arm plate.
  • Compatible with many optional parts for the Inferno series.


Needed to Complete:
  • 1x LiPo Receiver Pack
  • 1x LiPo Charger
  • 1x Nitro Race Fuel
  • 1x Glow Driver
  • 1x 2 Channel Radio (minimum) 
  • 2x Servos
  • 1x Set of 1/8 Scale Off Road Truggy Tires
  • 1x Competition .21 Engine and Exhaust Pipe
  • 1x Nitro Starter box
Typical Kyosho high quality race kit
$875.00  Inc Tax
$1,495.00
Per Page      1 - 2 of 2
  • 1