On-Road Electric Kits
Tamiya 1/10 R/C FORD ESCORT MK.II RALLY: MF-01X (4wd) (TAM 58687)
This R/C model assembly kit recreates the classic Ford Escort Mk.II in rally racing form. It was a RAC Rally Champion from 1975-1979. The pre-painted body sits on top the Tamiya MF-01X chassis that is capable both on asphalt and flat dirt surfaces.
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Rally Block tires with width/diameter of 27/69mm are also included.
Features:
Specifications:
Required Items (Sold Separately)
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Rally Block tires with width/diameter of 27/69mm are also included.
Features:
- 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L).
- Polycarbonate body pre-painted in White.
- Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps.
- Polycarbonate front and rear light cases are compatible with separately sold Tamiya 5mm LEDs.
- Stickers are included to recreate blue livery sections, sponsor logos and more.
- The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
- Tamiya Torque Tuned Motor included.
Specifications:
Length: | 414mm |
Wheelbase: | 239mm (L) |
Transmission type: | 4WD |
Differential type: | Gears |
Suspension type: | Fully Independent Double Wishbone |
Damper: | Friction type |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Pre-Painted Body
Tamiya 1/10 R/C FIAT 131 ABARTH RALLY: MF-01X (TAM 58723)
This R/C model assembly kit recreates the classic FIAT 131 Abarth Rally Olio Fiat on the easy to assemble and drive MF-01X rally chassis platform. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori which made its debut in 1976 and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery.
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
Specifications:
Required Items (Sold Separately)
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
- 1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).
- The body is breathtakingly recreated in durable, lightweight polycarbonate.
- Separately molded plastic components recreate side mirrors and rear wings.
- The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Polycarbonate light cases are compatible with separately sold 5mm LEDs.
- Stickers are included to recreate body details and logos.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Specifications:
Length: | 400mm |
Width: | 180mm |
Height: | 132mm |
Wheelbase: | 239mm (L-size wheelbase) |
Transmission type: | 4WD |
Differential type: | Gears |
Suspension type: | Fully Independent Double Wishbone |
Damper: | Friction type |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
This kit depicts the Olio Fiat’s livery.
Tamiya 1/10 R/C FIAT ABARTH 1000 TCR: MB-01 (TAM 58721)
The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
Specifications:
Required Items (Sold Separately)
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup).
- The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases (*), and front- or rear- wheel drive system. Six setups are available in total.
- Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
- Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
- The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
- While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
- Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
- Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
- Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
- Includes 540 motor and ESC.
Specifications:
Length: | 322mm |
Width: | 163mm |
Wheelbase: | 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup). |
Transmission type: | 2WD |
Differential type: | Gears |
Gear ratio: | 5.83:1 (when using kit-standard 29T pinion gear) |
Suspension type: | 4-wheel double wishbone suspension features symmetrical structure |
Damper: | Friction type |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Can be run FWD or RWD
Tamiya 1/10 R/C ALFA ROMEO GIULIA SPRINT: MB-01 (TAM 58732)
The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front or rear wheel drive system.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front or rear wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
Required Items (Sold Separately)
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front or rear wheel drive system.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front or rear wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L)
- The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
- Features 60mm front and rear tires.
- This kit includes livery stickers to create a design inspired by the numerous amateur club racers.
- Includes 540-Type brushed motor.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Can be run FWD or RWD
Tamiya 1/10 R/C Opel Kadett Gt/E: MB-01 (TAM 58729)
This 1/10 scale R/C assembly kit recreates the Opel Kadett GT/E on the versatile MB-01 chassis platform. The MB-01 chassis for this subject is configured in the long wheelbase and midship rear motor / rear wheel drive (MR) to faithfully capture the layout of the actual vehicle.
The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
Required Items (Sold Separately)
The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- 1/10 scale R/C model assembly kit.
- Length: 417mm
- Width: 174mm
- Height: 138mm
- Wheelbase: 239mm (Long wheelbase)
- The body is recreated in lightweight polycarbonate
- Features 60mm front and rear tires. Use 60D tires when changing tires.
- Includes 540-Type motor and ESC.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Can be run FWD or RWD
- 1