Servos & Parts

Sort By:  
Super Speed Brushless Low Profile Servo
$219.95  Inc Tax
Perfect fit for the latest range of TLR race vehicles
$214.95  Inc Tax
Uses powerful, efficient, coreless motor.
$211.95  Inc Tax
10kg/cm, 0.07 Sec
$174.95  Inc Tax
HV, 15kg/cm, 0.085 Sec
$154.95  Inc Tax
9kg/cm, 0.009 Sec
$109.95  Inc Tax
Highest RC BLP650 Digital Racing Low Profile Servo (Brushless) (HRC BLP650)
This is a BLP650 Low Profile Servo from Highest RC.

  • DLP650, the most popular model as World Champion servo is upgraded to BRUSH-LESS version!
  • The improvements of this servo does not stop at just the Motor but also Heat emission by a new hard sink case.
  • Reducing weight, Florid laser marking and better design.


Highest RC servos are designed and manufactured to provide unmatched performance and durability to racers at all levels. Featuring the finest quality components available on today’s market, Highest RC servos will amaze you with their quiet operation, stunning performance, and superb durability.


The BLP650 Low Profile features an aluminium middle case to dissipate heat. With precision dual ball bearings to support the gear train and exceptionally durable metal gears. The Highest RC BLP650 Low Profile also comes with a very strong aluminium single arm servo horn and mounting grommets.

The Highest RC BLP650 Low Profile uses a powerful, but very efficient, brushless motor. The highly efficient motor, in combination with the precision electronics, means “brown outs” and “glitching” are a thing of the past. An external BEC or BEC stabilizing receiver capacitor is not needed with a Highest RC BLP650 Low Profile servo!

If you are looking for a servo that will deliver the performance and reliability that you demand and expect in your vehicle, then you’ve found it.  Get a Highest RC BLP650 HV servo and put your competition behind you.


Features:
  • Aluminium Case (upper, short middle, middle) + Plastic (bottom)
  • Full Metal Gears
  • Operating Voltage: 6.0~7.4V
  • Operating Temperature Range: -10 to +60 Degrees C
  • Operating Speed: (6.0V) : 0.07sec, (7.4V) : 0.06sec
  • Dynamic Torque: (6.0V) : 9.9kg-cm, (7.4V) : 12.2kg-cm
  • Motor Type: high efficient Brushless motor
  • Size: 39.5 x 20.0 x 30.3 mm
  • Weight: 51.7 g


Super fast and powerful servo
$236.95  Inc Tax
Arrowmax Dash SS601 Super Speed Low Profile Servo (Brushless) (AM DA-720601)
This is a SS601 Super Speed Low Profile Servo from Arrowmax Dash.

Dash have introduced an all new lineup of Competition Servo. The A10 series SS601 can ultimately delivers up to 0.056sec in speed and it features a dedicated software for Competition in EP racing. Special tune with the most accurate potentiometer brand NOBLE from Japan, the SS601 can take advantage of the HD 4096 Resolution, 0.008ms Dead Band to deliver accuracy.

The dual ball-raced servo utilizes Chrome and Titanium alloy gears for durability. The Signature Black Golden CNC Machine Case allow the 2 poles Brushless Motor to have maximum Cooling during those heavy stress usages.


Features:
  • Aluminium Case (Upper,Middle,Bottom)
  • Operating Voltage: 6.0~7.4V
  • Operating Temperature Range: -10 To +60 Degree C
  • Operating Speed: (6.0V) : 0.068sec / (7.4V) : 0.056sec
  • Dynamic Torque: (6.0V) : 9.3Kg-cm / (7.4V) : 13.8Kg-cm
  • Dimension: 40*20*26.4mm
  • Weight: 52g
  • Spline: 25T
  • 2 pole brushless motor


Super Speed Brushless Low Profile Servo
$219.95  Inc Tax
Spektrum S6240 Digital High Speed Waterproof Metal Gear Servo (SPMSS6240)
This is the Low profile high speed waterproof S6240 metal geared servo from Spektrum which fits perfectly in most of today's 1/10 class vehicles.

The latest generation of Spektrum surface servos provides you with the performance you need for any 1/10th scale vehicle application. The  S6240 offers high-torque or high-speed performance in a more compact size for 1/10th scale crawlers or monster trucks where space is limited. 
The  S6240 servo features Spektrum innovations like the removable wire leads that allow for customise the lead length and ease of maintenance and include all metal servo mounting tabs to keep them in place through the most extreme conditions.


Features:
  • Removable wire harness with different lengths available
  • 7075 Aluminium hard anodized output shaft/main gear with steel internal gears
  • Aluminium case for good heat dissipation
  • Aluminium mounting tabs
  • NMB dual main bearings
  • 23T output shaft
  • Waterproof
  • 1-Year Limited Warranty

Specifications:
  • Size Category: Specialty
  • Type: Digital
  • Application: 1/10 Buggy, Truck, On-Road
  • Torque: 15.0kg-cm @ 6.0V
  • Speed: 0.08 sec/60 deg @ 6v (no load)
  • Length: 41mm
  • Width: 20.9mm
  • Height: 30mm
  • Weight: 59.5g
  • Bushing Or Bearing: Bearing
  • Bearing: Dual
  • Motor Type: Coreless
  • Connector Type: Z-Connector, removable
  • Gear Type: Metal
  • Gear Material: Steel, Aluminium
  • Current Draw Idle: 9.8 mA @ 6.0V
  • Current Draw Stall: 4.9A @ 6.0V
  • Voltage: 6.0V
Perfect fit for the latest range of TLR race vehicles
$214.95  Inc Tax
Highest RC DLP650 Digital Racing Low Profile Servo (Coreless) (HRC DLP650)
This is a DLP650 Low Profile Servo from Highest RC.

Highest RC servos are designed and manufactured to provide unmatched performance and durability to racers at all levels. Featuring the finest quality components available on today’s market, Highest RC servos will amaze you with their quiet operation, stunning performance, and superb durability.

The DLP650 Low Profile features an aluminium middle case to dissipate heat. With precision dual ball bearings to support the gear train and exceptionally durable metal gears. The Highest RC DLP650 Low Profile also comes with a very strong aluminium single arm servo horn and mounting grommets.

The Highest RC DLP650 Low Profile uses a powerful, but very efficient, coreless motor. The highly efficient motor, in combination with the precision electronics, means “brown outs” and “glitching” are a thing of the past. An external BEC or BEC stabilizing receiver capacitor is not needed with a Highest RC DLP650 Low Profile servo!

If you are looking for a servo that will deliver the performance and reliability that you demand and expect in your vehicle, then you’ve found it.  Get a Highest RC DLP650 HV servo and put your competition behind you.


Features:
  • Aluminium Case (upper, short middle, middle) + Plastic (bottom)
  • Full Metal Gears
  • Operating Voltage: 6.0~7.4V
  • Operating Temperature Range: -10 to +60 Degrees C
  • Operating Speed: (6.0V) : 0.07sec, (7.4V) : 0.06sec
  • Dynamic Torque: (6.0V) : 7.1kg-cm, (7.4V) : 8.3kg-cm
  • Motor Type: high efficient Coreless motor
  • Size: 39.5 x 20.0 x 30.3 mm
  • Weight: 54.5 g


Uses powerful, efficient, coreless motor.
$211.95  Inc Tax
Savox SB-2263MG Low Profile Servo (SB-2263MG-BLACK)

This is the SB-2263MG servo from Savox featuring a Brushless motor, metal gears and a low profile case design. 

Savox's SB-2263MG Black Edition "High Speed" Low Profile Brushless Metal Gear Servo features a sleek black aluminium center case with laser etched details, as well as a shorter heavy duty wire. These servos combine leading edge technology with super high 12 bit (4096) resolution. These servos also feature a brushless motor/controller unit, and use a 'bullet proof' all metal gear set for unmatched strength that makes them ideal for 1/10 touring car and off road applications that require a high speed servo.

Savox Black Edition Features:
  • Higher performance due to brushless motor and improved technology
  • Fast response
  • Incredible torque
  • Increased transit speed
  • Increased efficiency
  • Water resistant with 4 silicon seals implanted
  • Strong and precise-made metal gears
  • Suitable for 1/10 touring car and off road



Specifications: 

    • Model: SB-2263MG 
    • Speed @ 7.4V: 0.07 sec/60° 
    • Torque @ 7.4V: 10kg-cm 
    • Voltage Range: 6.0v
    • Weight: 62g
    • Motor: Brushless
    • Gear: Metal
    • Case: Aluminium Heatsink
    • Output Shaft: 25T Spline (Futaba)
    • Dimensions (L x W x H): 40.8 x 20.2 x 25.4mm
    • Frequency: 250-333hz
    • Pulse Width Frequency: 1520
    • Wire Length: 55mm


    NOTE:
     Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. A Savox Power Capacitor/Glitch Buster may be needed for efficient, glitch free operation in low voltage electric applications.

    10kg/cm, 0.07 Sec
    $174.95  Inc Tax
    Savox SV-1254MG Low Profile High Voltage Servo (SAV SV-1254MG)

    This is the SV-1254MG servo from Savox featuring a coreless motor, steel gears, a low profile case design and high voltage compatibility.

    At 7.4V the SV-1254MG outputs 0.085 sec/60° speed with 15kgs-cm of torque, all while weighing only 46 grams. 

    Specifications: 

    • Model: SV-1254MG 
    • Speed @ 7.4V: 0.085 sec/60° 
    • Torque @ 7.4V: 15kg-cm 
    • Gears: Metal 
    • Motor: Coreless 
    • Weight: 46 grams 
    • Dimensions: 40.8 x 20.2 x 25.4mm

    NOTE: 
    Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. A Savox Power Capacitor/Glitch Buster may be needed for efficient, glitch free operation in low voltage electric applications.
    HV, 15kg/cm, 0.085 Sec
    $154.95  Inc Tax
    Savox SV-1251MG Low Profile Servo (SC-1251MG-BLACK)

    This is the SC-1251MG Low Profile Digital Metal Gear Servo from Savox.

    The Savox SC-1251MG combines leading edge technology, with super high 12 bit (4096) resolution and Metal Gears. With it's low profile case, the SC-1251MG is ideal for most 1/10 onroad, and 1/10 buggy applications.

    Features:

    • Light weight
    • Coreless Motor provides high speed, incredible efficiency, and low power consumption
    • The Aluminium Case design not only looks good but also allows for lower operating temperatures.
    • Totally Green – from materials to production, these servos are environmentally friendly.
    • Ideal as a steering servo for 1/10 surface applications


    Specifications: 

    • Speed @ 6.0V: 0.09
    • Torque @ 6.0V: 9.0 kg-cm
    • Weight: 44.5g
    • Bearing: Dual
    • Type: Low Profile
    • Gear: Metal
    • Output Shaft: 25T Spline (Futaba)
    • Case: Aluminium Heatsink
    • Case Size (L x W x H): 40.8 x 20.2 x 25.4mm

    NOTE:
     Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. A Savox Power Capacitor/Glitch Buster may be needed for efficient, glitch free operation in low voltage electric applications.
    9kg/cm, 0.009 Sec
    $109.95  Inc Tax
    Savox SC-0252MG Standard Digital Metal Gear Servo (SC-0252MG)

    This is the SC-0252MG Standard, Digital, metal gear servo from Savox.

    At 6.0V the SC-0252MG outputs 0.19 sec/60° speed with 10.5kgs-cm of torque, all while weighing 49 grams. 

    Features:

    • Precision metal gears forms a strong and solid framework
    • Strict production and quality control of plastic components
    • Totally Green – from materials to production, these servos are environmentally friendly.
    • Ideal for surface vehicle steering applications.


    Specifications: 

    • Model: SC-0252MG 
    • Speed @ 6.0V: 0.19 sec/60° 
    • Torque @ 6.0V: 10.5kg-cm 
    • Weight: 49g
    • Bearing: Dual
    • Type: Standard
    • Gear: Metal
    • Case: Plastic
    • Output Shaft: 25T Spline (Futaba)
    • Case Size (L x W x H): 40.7 x 20 x 39.4mm

    NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. A Savox Power Capacitor/Glitch Buster may be needed for efficient, glitch free operation in low voltage electric applications.
    10.5kg/cm, 0.19 Sec
    $59.95  Inc Tax
    Savox SC-0254MG Standard Digital Metal Gear Servo (SC-0254MG)

    This is the SC-0254MG Standard, Digital, metal gear servo from Savox.

    At 6.0V the SC-0254MG outputs 0.14 sec/60° speed with 7.2kgs-cm of torque, all while weighing 49 grams. 

    Features:

    • Precision metal gears forms a strong and solid framework
    • Strict production and quality control of plastic components
    • Totally Green – from materials to production, these servos are environmentally friendly.
    • Ideal for surface vehicle steering applications.


    Specifications: 

    • Model: SC-0252MG 
    • Speed @ 6.0V: 0.14 sec/60° 
    • Torque @ 6.0V: 7.2kg-cm 
    • Weight: 49g
    • Bearing: Dual
    • Type: Standard
    • Gear: Metal
    • Case: Plastic
    • Output Shaft: 25T Spline (Futaba)
    • Case Size (L x W x H): 40.3 x 20 x 39.4mm

    NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. A Savox Power Capacitor/Glitch Buster may be needed for efficient, glitch free operation in low voltage electric applications.
    7.2kg/cm, 0.14 Sec
    $59.95  Inc Tax
    Tamiya Hi-Torque Servo Saver with Aluminium Horn (Blue) (TAM 54799)
    This is a Hi-Torque Servo Saver Set with a Blue Aluminium Horn from Tamiya.

    Very strong
    $32.95  Inc Tax
    Tamiya Hi-Torque Servo Saver (Black) (TAM 51000)
    This is a Hi-Torque Servo Saver Set from Tamiya.

    Very Popular
    $26.95  Inc Tax
    Per Page      1 - 11 of 11
    • 1