Receivers
| Antenna Length: | 455mm |
| Band: | 2.4GHz |
| Bind Method: | Bind Plug |
| Channels: | 4 |
| Data Port: | No |
| Failsafe: | Yes |
| Height: | 12.2 mm |
| Input Voltage: | 3.5-9.6V |
| Length: | 33.8 mm |
| Model Type: | Marine |
| Modulation: | DSM2,DSMR |
| Range: | Full |
| Telemetry: | No |
| Type: | Marine |
| Water-Resistant: | Yes |
| Weight: | 17g |
| Width: | 22.1 mm |
NOTE:
- SR mode servos must be used when using SR mode. Use of normal servos may cause servo glitching.
- Never use the R404SBS-E in gas or nitro powered models.
- Size: 25.5×20.7×10.6 mm
- Weight: 5.7 g
- Operating Voltage: DC 3.7V-7.4V
Designed for use with Futaba surface transmitters using TFHSS and
TFHSS-SR technology
TFHSS bidirectional telemetry
Programmable and compatible with S.Bus2 systems
Normal/high-speed modes (auto detection), normal mode accepts any
type of servo, high-speed mode only accepts digital servos
including BLS servos
High voltage
Dual antenna diversity
Battery fail safe
One year limited warranty through Hobby Services beginning at date of
purchase
NOTE:
- Never use the R344SBS-E in gas or nitro powered models.
- Size: 33.9×22.3×11.3 mm
- Weight: 7.3 g
- Operating Voltage: DC 3.7V-7.4V
Built around frequency-agile DSMR technology, the SR315 receiver delivers superb range and response, especially in noisy RF environments where a solid 2.4GHz link is crucial. Not only is the 2.4ghz link solid, this model also implements our lightning fast 5.5ms frame rate, providing a quicker , low-latency connection for the pro-level enthusiast.
The SR315 also features a new, modern case design that is small, streamlined, and ready for nearly any RC application. The case also features added antenna support and an integrated antenna tube slot for seamlessly easy installation.
No more bind plugs! Instead, an easy-to-use bind button is used to enter the bind mode. Plus, while binding, you have the choice of SmartSafe™ as well as preset ‘Gas’ failsafe options. All combined, Spektrum gives drivers more features in an affordable receiver, so you can drive with confidence.
Key Features:
- Streamlined design in a compact and lightweight hard-case
- Bind-button eliminates the need for a bind plug
- SmartSafe™ Failsafe and Preset "Gas Mode" Failsafe options
- Outstanding range and 5.5ms capable DSMR technology
- Ideal for nearly any surface RC model
Compact Design
The SR315 is capable of being placed in very small and tight builds. We eliminated un-needed angles to streamline the receiver casing and to make installation easier than ever before. The case also features added antenna support and an integrated antenna tube slot for those custom models that do not provide a route for the antenna installation.
Bind Button
New technology eliminates the need for the old bind plug. With The SR315 a top-located button makes binding more convenient than ever while two bind-sequence options make the process simpler by allowing you to bind while powering up or after receiver power is connected.
Built into The SR215 is our newest failsafe mode for surface applications, Gas Mode Failsafe. Easyily selectable during binding, Gas Mode allows users to preset the failsafe position of all available channels. Additionally drivers can utilize SmartSafe ™ failsafe which drops throttle to the lowest point and holds the last known command on the rest of the available channels.
| Band: | 2.4GHz |
| Bind Method: | Bind Button |
| Channels: | 3 |
| Data Port: | No |
| Failsafe: | Yes |
| Height: | 13.6 mm |
| Input Voltage: | 3.5-9.6 V |
| Length: | 32.7 mm |
| Modulation: | DSMR |
| Range: | Full |
| Telemetry: | No |
| Type: | Surface Receiver |
| Water-Resistant: | No |
| Weight: | 6.0 g |
| Width: | 21.4 mm |
The RX-481 Super Response receiver features a built-in antenna! This means no more antennas sticking out of the body, as well as no more worry about damaging the antenna during use. Just mount the RX-481 Super Response receiver in the upright position in your model and enjoy the same solid reception as you've come to expect from other Sanwa surface receivers.
The RX-481 Super Response receiver is compatible with Airtronics and Sanwa 2.4GHz FH3 and FH4T transmitters, such as the M12S, M12, MT-4S, MT-4, MX-3X, M11X, EXZES-Z and Gemini X. It features an extremely low latency time and high frame rate, which makes you feel more connected to your model than ever, and when combined with Airtronics or Sanwa Super Response SRG digital servos (available separately), the RX-481 Super Response receiver will deliver reaction speeds like never before!
Features:
- Built-In Internal Antenna - No More Unsightly External Antenna
- Compatible with Sanwa and Sanwa FH3 and FH4T Transmitters
- Extremely Low Latency and High Frame Rate Makes You Fell More Connected to Your Model
- Supports Normal, SSR and SHR Channel Response Modes (Requires Compatible Transmitter)
- Compatible with Sanwa and Sanwa SRG Digital Servos
Specifications:
Frequency: 2.4GHz FH3/FH4T Selectable Via Transmitter
Nominal Input Voltage: 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S LiFe or 2S LiPo)
Weight: 7.1g
Dimensions: 18.2 x 24.4 x 27.1mm
Battery Fail Safe Limit: 3.5 to 5.0 Volts (FH3) / 3.5 to 7.4 Volts (FH4T)
NOTE:
- Although the reception capability of this receiver is equal to our other receivers that feature an external antenna, because the internal antenna is positioned lower in your model, the reception distance will be shorter in actual use.
- Do to the internal antenna position, this receiver is not suitable for use in an R/C boat. It should be used in R/C cars and trucks only.
- Super Response (SSR) feature only available when used with an Airtronics or Sanwa FH4T transmitter in SSR Channel Response Mode with Airtronics or Sanwa Super Response SRG digital servos.
This means no more antennas sticking out of the body, as well as no more worry about damaging the antenna during use. Just mount the RX-482 Super Response SSL receiver in the upright position in your model and enjoy the same solid reception as you've come to expect from other Airtronics and Sanwa receivers. Combined with Airtronics or Sanwa Super Response SRG digital servos, the RX-482 Super Response SSL receiver will give you reaction speeds like never experienced before!
When used with an Airtronics or Sanwa M12S, M12, MT-4S or Sanwa EXZES-Z transmitter and a Super Vortex series ESC or other SSL compatible device, the SSL function allows you to change many programming mode options directly from the transmitter using the transmitter's CODE AUX function, on the fly - even while you're driving. In addition, telemetry data such as speed or RPM, ESC temperature, motor temperature (if supported), and battery voltage can be read directly from the Super Vortex series ESC and displayed on the transmitter.
Features:
- Built-In Internal Antenna - No More Unsightly External Antenna
- Compatible with Airtronics and Sanwa FH4T Transmitters
- Supports Sanwa Synchronized Link for Remote Programming
- Extremely Low Latency and High Frame Rate Makes You Fell More Connected to Your Model
- Supports Normal, SSR and SHR Channel Response Modes (Requires Compatible Transmitter)
- Compatible with Airtronics and Sanwa SRG Digital Servos
Specifications:
Frequency: 2.4GHz FH4T Selectable Via Transmitter
Nominal Input Voltage: 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S LiFe or 2S LiPo)
Weight: 7.1g
Dimensions: 18.2 x 24.4 x 27.1mm
Battery Fail Safe Limit: 3.5 to 7.4 Volts (FH4T)
NOTE:
- Although the reception capability of this receiver is equal to our other receivers that feature an external antenna, because the internal antenna is positioned lower in your model, the reception distance will be shorter in actual use.
- Do to the internal antenna position, this receiver is not suitable for use in an R/C boat. It should be used in R/C cars and trucks only.
- SSL function only available when used with an M12S, M12, MT-4S or EXZES-Z transmitter and a Super Vortex series ESC or other SSL compatible device. Super Response (SSR) feature only available when used with an Airtronics or Sanwa FH4T transmitter in SSR Channel Response Mode with Airtronics or Sanwa Super Response SRG digital servos. Telemetry requires telemetry capable transmitter (M12S, M12, MT-4S, MT-4 or EXZES-Z) and Super Vortex series ESC. If not using a Super Vortex series ESC, the RX-482 Super Response SSL receiver can send telemetry data for the voltage of the receiver battery pack only.
Built around frequency-agile DSMR technology, the SR315 receiver delivers superb range and response, especially in noisy RF environments where a solid 2.4GHz link is crucial. Not only is the 2.4ghz link solid, this model also implements our lightning fast 5.5ms frame rate, providing a quicker , low-latency connection for the pro-level enthusiast.
The SR315 also features a new, modern case design that is small, streamlined, and ready for nearly any RC application. The case also features added antenna support and an integrated antenna tube slot for seamlessly easy installation.
No more bind plugs! Instead, an easy-to-use bind button is used to enter the bind mode. Plus, while binding, you have the choice of SmartSafe™ as well as preset ‘Gas’ failsafe options. All combined, Spektrum gives drivers more features in an affordable receiver, so you can drive with confidence.
Key Features:
- Streamlined design in a compact and lightweight hard-case
- Bind-button eliminates the need for a bind plug
- SmartSafe™ Failsafe and Preset "Gas Mode" Failsafe options
- Outstanding range and 5.5ms capable DSMR technology
- Ideal for nearly any surface RC model
Compact Design
The SR315 is capable of being placed in very small and tight builds. We eliminated un-needed angles to streamline the receiver casing and to make installation easier than ever before. The case also features added antenna support and an integrated antenna tube slot for those custom models that do not provide a route for the antenna installation.
Bind Button
New technology eliminates the need for the old bind plug. With The SR315 a top-located button makes binding more convenient than ever while two bind-sequence options make the process simpler by allowing you to bind while powering up or after receiver power is connected.
Built into The SR315 is our newest failsafe mode for surface applications, Gas Mode Failsafe. Easily selectable during binding, Gas Mode allows users to preset the failsafe position of all available channels. Additionally drivers can utilize SmartSafe ™ failsafe which drops throttle to the lowest point and holds the last known command on the rest of the available channels.
| Band: | 2.4GHz |
| Bind Method: | Bind Button |
| Channels: | 3 |
| Data Port: | No |
| Failsafe: | Yes |
| Height: | 13.6 mm |
| Input Voltage: | 3.5-9.6 V |
| Length: | 32.7 mm |
| Modulation: | DSMR |
| Range: | Full |
| Telemetry: | No |
| Type: | Surface Receiver |
| Water-Resistant: | No |
| Weight: | 6.0 g |
| Width: | 21.4 mm |
Specifications:
- Operating Voltage: 4.8 - 7.4V
- Receiving Range: 70m
- Battery Failsafe: 3.8V
- Current Drain: 30Ma (at no signal)
- Size: 35.1 x 23.2 x 9mm
- Weight: 6g
They sync perfectly with Continuous Channel Shifting, handling hundreds of frequency changes per second with flawless precision. Plus, they all offer the Easy-Link™ advantage — the feature that allows the receiver to “learn” the transmitter module’s unique code with the push of a button and establish a unique, unbreakable bond between the two.
Frequency Hopping Spread Spectrum (FHSS) technology minimizes interference from other 2.4GHz systems. Easy Link prevents unwanted signal conflicts by using a special, pre-assigned ID code. High-voltage operation.
NOTE: This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.
Features:
- S-FHSS/FHSS auto detection
- Compatible with Futaba S-FHSS/FHSS protocol
- Normal and high-speed mode:
- Normal mode has a frame rate output of 13.63ms and accepts any type of servos or peripherals
- High-speed mode, with an output of 6.8ms, accepts digital servos including the BLS series and most peripheral equipment such as brushless ESCs
Dimensions: 26x39x10mm
Weight: 8g
Operating Voltage: 4.8 to 7.4V |
Number of Ports: 4
PWM Output: 3
SBUS Ports: 0
SBUS2 Ports: 0
FASST: No
Telemetry: no
S-FHSS: Yes
High Speed: Yes
High Voltage: Yes
Connector: J (STND)
Range: Full Range
NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems.
Built around frequency-agile DSMR technology, the SR215 receiver delivers superb range and response, especially in noisy RF environments where a solid 2.4GHz link is crucial. Not only is the 2.4ghz link solid, this model also implements our lightning fast 5.5ms frame rate, providing a quicker , low-latency connection for the pro-level enthusiast.
The SR215 also features a new, modern case design that is small, streamlined, and ready for nearly any RC application. The case also features added antenna support and an integrated antenna tube slot for seamlessly easy installation.
No more bind plugs! Instead, an easy-to-use bind button is used to enter the bind mode. Plus, while binding, you have the choice of SmartSafe™ as well as preset ‘Gas’ failsafe options. All combined, Spektrum gives drivers more features in an affordable receiver, so you can drive with confidence.
Key Features:
- Streamlined design in a compact and lightweight hard-case
- Bind-button eliminates the need for a bind plug
- SmartSafe™ Failsafe and Preset "Gas Mode" Failsafe options
- Outstanding range and 5.5ms capable DSMR technology
- Ideal for nearly any surface RC model
Compact Design
The SR215 is capable of being placed in very small and tight builds. We eliminated un-needed angles to streamline the receiver casing and to make installation easier than ever before. The case also features added antenna support and an integrated antenna tube slot for those custom models that do not provide a route for the antenna installation.
Bind Button
New technology eliminates the need for the old bind plug. With The SR215 a top-located button makes binding more convenient than ever while two bind-sequence options make the process simpler by allowing you to bind while powering up or after receiver power is connected.
Built into The SR215 is our newest failsafe mode for surface applications, Gas Mode Failsafe. Easily selectable during binding, Gas Mode allows users to preset the failsafe position of all available channels. Additionally drivers can utilize SmartSafe ™ failsafe which drops throttle to the lowest point and holds the last known command on the rest of the available channels.
| Band: | 2.4GHz |
| Bind Method: | Bind Button |
| Channels: | 2 |
| Data Port: | No |
| Failsafe: | Yes |
| Height: | 13.6 mm |
| Input Voltage: | 3.5-9.6 V |
| Length: | 32.7 mm |
| Modulation: | DSMR |
| Range: | Full |
| Telemetry: | No |
| Type: | Surface Receiver |
| Water-Resistant: | No |
| Weight: | 6.0 g |
| Width: | 21.4 mm |
Specifications:
Dimensions: 35x23x9mm
Weight: 6g
Operating Voltage: 4.8 to 7.4V
Number of Ports: 3
SBUS Ports: 0
SBUS2 Ports: 0
FASST: No
Telemetry: no
S-FHSS: Yes
High Voltage: Yes
NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems.
This plug is plugged into the Spektrum receiver or into the charge jack on the switch to place the receiver into bind mode.
- 1