1/10 Off-Road Buggy Tires

This is a pair of (2) 1/10 BLOCKADE Buggy Tires in M3 (Soft) compound from Proline.

The Pro-Line Blockade 2.2" 4WD Buggy Front Tire is perfect for loose, dusty or hard-packed conditions.

The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires.

This tire will give your buggy qualifying speed with tread life capable of outlasting the competition.


Features:

• Revolutionary Tread Design
• Longer Tread Life
• More Traction
• Based off the 1:8 Buggy 2011 ROAR Fuel Off-Road National Champion
• Dominate Tracks around the Globe
• Ideal for loose, dusty or hard packed conditions
• More Forward Bite
• Outlast the Competition
• Includes Closed Cell Foam
• Made in the USA, since 1982

Package Includes:

• 2x BLOCKADE 1/10 4wd Front Buggy Race Tires
• 2x Closed Cell Foam Inserts

This is a pair of (2) 1/10 BLOCKADE Buggy Rear Tires in M4 (Super-Soft) compound from Proline.

If you find yourself racing in loose, dusty or hard-packed conditions with your 1/10 Buggy - you NEED a set of Blockades!

The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires.

This tire will give your buggy qualifying speed with tread life capable of outlasting the competition. Pro-Line's Blockade is the new must-have 1/10 Buggy Race tire and will dominate your local track.

The Blockade - The latest way that Pro-Line is Racing to Bring You The Best!

Features:

• Revolutionary Tread Design
• Longer Tread Life
• More Traction
• Based off the 1:8 Buggy 2011 ROAR Fuel Off-Road National Champion
• Dominate Tracks around the Globe
• Ideal for loose, dusty or hard packed conditions
• More Forward Bite
• Outlast the Competition
• Includes Closed Cell Foam
• Made in the USA, since 1982

Package Includes:

• 2x BLOCKADE 1/10 4wd Front Buggy Race Tires
• 2x Closed Cell Foam Inserts

This is a packet of (2) 1/10 V2 DOUBLE DEE's Rear Buggy Tires from JConcepts.

The JConcepts Double Dee’s rear tire is perfect for a variety of track surfaces. The especially unique Double Dee lug technology combined with the sticky green compound allow the flexibility necessary to compete on even the most demanding surfaces for an extended period of time. Double Dee’s are good to the last drop as the design allows even wear all the way down to the tire body. The Double Dee’s incorporate a compact tire body with crisp tread and separation for intense racing. Double Dee’s excel on outdoor hard packed clay surfaces with either dry or wet conditions. Double Dee’s are at their best when used on a surface with a blue grooved surface.

Features:

• Compact tire body with crisp tread and separation
• Aggressive square Double Dee lug technology
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" ELLIPSE's Rear Buggy Tires from JConcepts.

The Ellipse, named after the center bar built into the tread, is a compliment to successful tires such as the Dirt Webs and Space Bars. The “Web” style tire was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The center section of the tire is a home run utilizing a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability.

The Dirt Web tire was originally released during the 2013 racing season and debuted in spectacular fashion with a win at the CRCRC Midwest Championships. Since that time, the Dirt Webs have been an industry leader for indoor performance and often chosen as a control tire for performance, reliability and consistency. During 2016, the Space Bars were introduced to a victory at the 1/10th Off-Road Nationals in the hands of Ryan Maifield in the 4wd modified class.

Jason Ruona explains, “The Ellipse has a slightly smaller carcass, it allows the driver to attack high-speed sections with more comfort. The “home plate” and connected web of tread has more stability high-speed and holds the tire together for today’s high-powered vehicles. Connected tread wears significantly better which is useful racing indoors where a racer can break-in and race with the same pair all weekend.”

The Ellipse has already shown success in the hands of Ryan Maifield taking TQ at the recent Spring Indoor Nationals in Tacoma, Washington. The compound of choice for most indoor events, the exclusive gold compound, has shown to produce consistent results for racers week after week. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Features:

• Designed in conjunction with World Champions Ryan Maifield, Spencer Rivkin and Ryan Cavalieri
• Ellipse center-bar control and support
• Diamond “home plate” design with extension webs
• 2.2” bead mounting size for compatibility
• Available in multiple compounds
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 2.2" DOUBLE DEE's V2 4WD Front Buggy Tires from JConcepts.

The JConcepts Double Dee’s V2 4WD Front tire is perfect for a variety of track surfaces. The especially unique Double Dee lug technology combined with the sticky green compound allow the flexibility necessary to compete on even the most demanding surfaces for an extended period of time. Double Dee’s are good to the last drop as the design allows even wear all the way down to the tire body. The Double Dee’s incorporate a compact tire body with crisp tread and separation for intense racing. Double Dee’s excel on outdoor hard packed clay surfaces with either dry or wet conditions. Double Dee’s are at their best when used on a surface with a blue grooved surface.

Features:

• Compact tire body with crisp tread and separation
• Aggressive square Double Dee lug technology
• Includes firm And-1 inserts

This is a packet of (2) 1/10 SPRINTER 2WD Front Buggy Tires from JConcepts.

The Sprinter tire is designed to have the ability to match front and rear pin tires from JConcepts. The Sprinter 4wd front tire has square, angled pins that are stacked vertically to flex and fold evenly across the tire. Typically, a stacked tread will wear less and provide more bite while the aligned space helps rotation in the turns and gives a snappy release to square up quickly. Starting with the new tread, the team focused on durability and performance to bring a front tire option to market that competes on loose surfaces which are wet or dusty.

With the popularity of dirt-oval racing, vehicles being designed with either mid-motor or laydown transmission options, a new generation pin style, carcass and outer tread design was needed. The outer sidewall of the tire has angled pins incorporated into the design to help “get into” the turn and provide the rotation not only needed in dirt off-road but specifically in dirt-oval racing. The blended tread to tire body is supported with a generous radius which promotes “pin snap” and resists tearing or separation.

Horizontal traction bars connect several pins near the center of the tire which bonds a critical area for increased push at high-speed. The sidewall area blends nicely into a step-spike feature which helps smooth the transition in bumpy sections and create side-bite. The Sprinters are built on the conventional and popular 2.2” bead and carcass design making them interchangeable. The tire maintains a comfy ride while each set of tires includes the Dirt-Tech closed cell inserts.

Features:

• JConcepts original tread, available in multiple compounds
• Square, angled pins with horizontal traction bars
• Angled outer sidewall pins for “turn-in”
• Conventional, 2.2” bead mounting size
• Carefully shaped carcass = smooth driving characteristics
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 SPRINTER 2.2 Rear Buggy Tires from JConcepts.

The Sprinter tire is designed to bridge a gap between the popular Double Dees and other pin tire options from JConcepts. The Sprinter tire has square, angled pins that are stacked vertically to flex and fold evenly across the tire. Typically, a stacked tread will wear less and provide more forward bite while the aligned space helps rotation in the turns and gives a snappy release to square up quickly. Starting with the new tread, the team focused on durability and performance to bring a rear tire option to market that competes on loose surfaces which are wet or dusty.

With the popularity of dirt-oval racing, vehicles being designed with either mid-motor or laydown transmission options, a new generation pin style, carcass and outer tread design was needed. The outer sidewall of the tire has angled pins incorporated into the design to help “get into” the turn and provide the rotation not only needed in dirt off-road but specifically in dirt-oval racing. The blended tread to tire body is supported with a generous radius which promotes “pin snap” and resists tearing or separation.

Horizontal traction bars connect several pins near the center of the tire which bonds a critical area for increased push at high-speed. The sidewall area blends nicely into a step-spike feature which helps smooth the transition in bumpy sections and create side-bite. The Sprinters are built on the conventional and popular 2.2” bead and carcass design making them interchangeable. The tire maintains a comfy ride while each set of tires includes the Dirt-Tech closed cell inserts.

Features:

• JConcepts original tread, available in multiple compounds
• Square, angled pins with horizontal traction bars
• Angled outer sidewall pins for “turn-in”
• Conventional, 2.2” bead mounting size
• Carefully shaped carcass = smooth driving characteristics
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 SPRINTER 4WD Front Buggy Tires from JConcepts.

The Sprinter tire is designed to have the ability to match front and rear pin tires from JConcepts. The Sprinter 4wd front tire has square, angled pins that are stacked vertically to flex and fold evenly across the tire. Typically, a stacked tread will wear less and provide more bite while the aligned space helps rotation in the turns and gives a snappy release to square up quickly. Starting with the new tread, the team focused on durability and performance to bring a front tire option to market that competes on loose surfaces which are wet or dusty.

With the popularity of dirt-oval racing, vehicles being designed with either mid-motor or laydown transmission options, a new generation pin style, carcass and outer tread design was needed. The outer sidewall of the tire has angled pins incorporated into the design to help “get into” the turn and provide the rotation not only needed in dirt off-road but specifically in dirt-oval racing. The blended tread to tire body is supported with a generous radius which promotes “pin snap” and resists tearing or separation.

Horizontal traction bars connect several pins near the center of the tire which bonds a critical area for increased push at high-speed. The sidewall area blends nicely into a step-spike feature which helps smooth the transition in bumpy sections and create side-bite. The Sprinters are built on the conventional and popular 2.2” bead and carcass design making them interchangeable. The tire maintains a comfy ride while each set of tires includes the Dirt-Tech closed cell inserts.

Features:

• JConcepts original tread, available in multiple compounds
• Square, angled pins with horizontal traction bars
• Angled outer sidewall pins for “turn-in”
• Conventional, 2.2” bead mounting size
• Carefully shaped carcass = smooth driving characteristics
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 2.2" ELLIPSE's Rear Buggy Tires from JConcepts.

The Ellipse, named after the center bar built into the tread, is a compliment to successful tires such as the Dirt Webs and Space Bars. The “Web” style tire was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The center section of the tire is a home run utilizing a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability.

The Dirt Web tire was originally released during the 2013 racing season and debuted in spectacular fashion with a win at the CRCRC Midwest Championships. Since that time, the Dirt Webs have been an industry leader for indoor performance and often chosen as a control tire for performance, reliability and consistency. During 2016, the Space Bars were introduced to a victory at the 1/10th Off-Road Nationals in the hands of Ryan Maifield in the 4wd modified class.

Jason Ruona explains, “The Ellipse has a slightly smaller carcass, it allows the driver to attack high-speed sections with more comfort. The “home plate” and connected web of tread has more stability high-speed and holds the tire together for today’s high-powered vehicles. Connected tread wears significantly better which is useful racing indoors where a racer can break-in and race with the same pair all weekend.”

The Ellipse has already shown success in the hands of Ryan Maifield taking TQ at the recent Spring Indoor Nationals in Tacoma, Washington. The compound of choice for most indoor events, the exclusive gold compound, has shown to produce consistent results for racers week after week. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Features:

• Designed in conjunction with World Champions Ryan Maifield, Spencer Rivkin and Ryan Cavalieri
• Ellipse center-bar control and support
• Diamond “home plate” design with extension webs
• 2.2” bead mounting size for compatibility
• Available in multiple compounds
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 ELLIPSE's 2WD Front Buggy Tires from JConcepts.

The Ellipse, named after the center bar built into the tread, is a compliment to successful tires such as the Dirt Webs and Space Bars. The “Web” style tire was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The center section of the tire is a home run utilizing a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability.

The Dirt Web tire was originally released during the 2013 racing season and debuted in spectacular fashion with a win at the CRCRC Midwest Championships. Since that time, the Dirt Webs have been an industry leader for indoor performance and often chosen as a control tire for performance, reliability and consistency. During 2016, the Space Bars were introduced to a victory at the 1/10th Off-Road Nationals in the hands of Ryan Maifield in the 4wd modified class.

Jason Ruona explains, “The Ellipse front tire has a slightly wider carcass, it allows the driver to attack high-speed sections with more comfort and smooths the steering of a 2wd buggy. The “home plate” and connected web of tread has a large footprint and 1000’s of edges to produce steering connection. Connected tread wears together which is useful racing indoors where a racer requires surface area to produce steering.”

The Ellipse tires are available in a huge selection of compounds such as blue, green, aqua, gold and the ROAR National Champion, silver compound. As a rule of thumb, blue and green are compounds conditioned to perform outdoors while aqua, gold and silver remain the favorites indoors. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Features:

• Designed in conjunction with World Champions Ryan Maifield, Spencer Rivkin and Ryan Cavalieri
• Ellipse center-bar control and support
• Diamond “home plate” design with extension webs
• 2.2” bead mounting size for compatibility
• Available in multiple compounds
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 ELLIPSE's 4WD Front Buggy Tires from JConcepts.

The Ellipse, named after the center bar built into the tread, is a compliment to successful tires such as the Dirt Webs and Space Bars. The “Web” style tire was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The center section of the tire is a home run utilizing a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability.

The Dirt Web tire was originally released during the 2013 racing season and debuted in spectacular fashion with a win at the CRCRC Midwest Championships. Since that time, the Dirt Webs have been an industry leader for indoor performance and often chosen as a control tire for performance, reliability and consistency. During 2016, the Space Bars were introduced to a victory at the 1/10th Off-Road Nationals in the hands of Ryan Maifield in the 4wd modified class.

Jason Ruona explains, “The Ellipse has a slightly tighter carcass, it allows the driver to attack high-speed sections with more comfort. The “home plate” and connected web of tread has more stability high-speed and holds the tire together for today’s high-powered vehicles. Connected tread wears significantly better which is useful racing indoors where a racer can break-in and race with the same pair all weekend.”

The Ellipse tires are available in a huge selection of compounds such as blue, green, aqua, gold and the ROAR National Champion, silver compound. As a rule of thumb, blue and green are compounds conditioned to perform outdoors while aqua, gold and silver remain the favorites indoors. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Features:

• Designed in conjunction with World Champions Ryan Maifield, Spencer Rivkin and Ryan Cavalieri
• Ellipse center-bar control and support
• Diamond “home plate” design with extension webs
• 2.2” bead mounting size for compatibility
• Available in multiple compounds
• Includes Dirt-Tech Closed cell foam inserts

This is a packet of (2) 1/10 2.2" FLIP OUTS 4WD Front Buggy Tires from JConcepts.

Flip Outs offer drivers a tire that is in-between Goose Bumps and Double Dees. Small pin construction makes up the foundation for the Flip Outs design and provides grip when racers need it most. When the conditions are wet and green in the morning, traction is sometimes hard to come-by; Flip Outs are the new choice.

Alternating center bar support provides the base for the forward traction while the small accommodating tapered pins provide the dig and flex under hard acceleration and cornering. Tire profile and interior ribbing design were all areas of focus while creating the combination of durability, functionality and performance.

Features:

• Compact tire body with crisp tread and separation
• Aggressive alternating center bar support
• Includes And-1 inserts

This is a packet of (2) 1/10 2.2" BAR CODE's Rear Buggy Tires from JConcepts.

The Code of Silence has been broken at JConcepts, and the Bar Codes are out. The Bar Code design is the freshest tire design seen in the last 10 years of racing development regardless of class and scale. Like the name suggests the alternating bar design combined with the addition of the Y side bars provide uncompromised support for blue and black groove conditions. Available in Blue and Orange compound the Bar Codes are a specialty tire that when matched to the appropriate track can provide amazing results..

The Bar Codes are a part of the JConcepts special breed of tire, designed for maximum performance when new or used as the design allows even wear all the way down to the tire body.

​Bar Codes in new condition excel on hard surfaces that have taken rubber with either dry or wet grooved conditions. Worn Bar Codes excel on indoor or outdoor clay tracks where a minimal dust groove has formed.

Features:

• X-Design interior carcass for enhanced support
• Alternating “Bar Code” design with Y side bars
• Includes JConcepts And-1 inserts

This is a packet of (2) 1/10 2.2" GOOSE BUMP's 4WD Front Buggy Tires from JConcepts.

The JConcepts Goose Bumps tire is just what the doctor ordered. The totally unique step pin and bar lug design combined with sticky compounds like yellow, blue and green allow even greater control on slightly loamy and wet conditions. The Goose Bumps are a special breed, designed for maximum performance when new or used as the design allows even wear all the way down to the tire body. Once the driver wears through the initial pin, a bar follows to maximize potential on aggressive surfaces.

The Goose Bumps incorporate a compact tire body with a crisp tread pattern with precise separation for intense racing competition. Goose Bumps in new condition excel on soft surfaces with either dry or wet conditions. Worn Goose Bumps excel on indoor or outdoor clay tracks where a slight groove has formed.

Features:

• Compact tire body with crisp tread and precise separation
• Aggressive step pin and bar lug combination design
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" GOOSE BUMP's Rear Buggy Tires from JConcepts.

The JConcepts Goose Bumps tire is just what the doctor ordered. The totally unique step pin and bar lug design combined with sticky compounds like yellow, blue and green allow even greater control on slightly loamy and wet conditions. The Goose Bumps are a special breed, designed for maximum performance when new or used as the design allows even wear all the way down to the tire body. Once the driver wears through the initial pin, a bar follows to maximize potential on aggressive surfaces.

The Goose Bumps incorporate a compact tire body with a crisp tread pattern with precise separation for intense racing competition. Goose Bumps in new condition excel on soft surfaces with either dry or wet conditions. Worn Goose Bumps excel on indoor or outdoor clay tracks where a slight groove has formed.

Features:

• Compact tire body with crisp tread and precise separation
• Aggressive step pin and bar lug combination design
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" 3D's Rear Buggy Tires from JConcepts.

Straight-out of the JConcepts Third Dimension are the creatively designed 3D's 1/10th buggy race tire. Debuted at the IFMAR World Championships in Pattaya, Thailand for the 1/8th buggy class, the 3D's designed by Jason Ruona and tested by the JConcepts Team are a first of their kind. Developed to be the ultimate Slick-groove tire, the 3D's are a first to combine the high-stability design of a black groove bar tire into an individually flexible pattern of finely spaced Double Dee lugs in one package.

The roots of the 3D's design came after extensive research and development over a period of 2 racing seasons. As racing on both indoor and outdoor conditions have matured, a more flexible, supremely grippy tire design was necessary to drive the edgy, fast pace. The 3D's grip as a new, highly sought after, favorite in these conditions. 3D's excel on indoor and outdoor hard packed surfaces with either dry or wet conditions. Drivers will feel the immediate impact of the exclusive design and proprietary rubber compound as they rip around the track at blistering speeds. An all-out design for racing, pure JConcepts.

Features:

• Compact tire body, high stability, individually flexible lugs
• Aggressive, supremely grippy feel
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" SPLITTERS Rear Buggy Tires from JConcepts.

JConcepts Splitters are a go-to tire for loose and slick conditions. The "Split-bar" and alternating horizontal and vertical positioning fill the void for both forward and side-bite. The Splitters are a micro-pin tire which places the individually spaced pins in opposing directions placing footing in each direction.

The tread sits on a proven "Bar Code" tire carcass giving the tire a low-profile, wide-body appearance allowing clipped tread to extend all the way to the outer edges. The carefully shaped profile allows a great balance of monster forward traction and comfortable side-bite. Once the cushy tread combines with the Super and Mega soft compounds the Splitters provide confidence inspiring grip in the toughest conditions.

Features:

• Split-bar tread with alternating horizontal and vertical positioning
• Micro-pin lugs, individually spaced
• 2.2" bead mounting size for compatibility
• Carefully shaped carcass = forward traction
• Includes firm And-1 foam inserts

This is a packet of (2) 1/10 2.2" NESSI Rear Buggy Tires from JConcepts.

JConcepts hits the track with another weapon for the carpet and astroturf racing world. The Nessi tire, shares styling cues from its successful brother, the Lockness. Racing on artificial surfaces require a lot of stability and forward-bite and the design team went to work to substantially improve performance. The new tire brings a new 3D blended pin-size, pin-separation and a light-weight and incredibly low-profile carcass.

Designed in the industry standard 2.2” bead mounting size, the Nessi is very versatile and has shown to work in many natural and artificial conditions. The semi-circle protrusions, unique to the Lockness and now the Nessi are included in the center section of the tire and on the sidewall area. These details are important and the low semi-circles improves side-bite but also minimize grip-rolling instances associated with normal pins.

The pink compound marked with 2 pink dots on the tire represents a new compound for JConcepts, a medium soft material with good wear characteristics. The rear tires include open cell inserts making them a complete set ready to mount, straight out of the package.

Features:

• JConcepts fit, finish and design
• 3D blended, medium-height pin-size for quick reaction
• Semi-circle protrusions for side-bite
• Low-profile, wide stance carcass
• Incredibly low-profile carcass for rolling speed
• Includes, open cell inserts

This is a packet of (2) 1/10 2.2" DOUBLE DEE's Rear Buggy Tires from JConcepts.

The JConcepts Double Dee’s rear tire is perfect for a variety of track surfaces. The especially unique Double Dee lug technology combined with the sticky green compound allow the flexibility necessary to compete on even the most demanding surfaces for an extended period of time. Double Dee’s are good to the last drop as the design allows even wear all the way down to the tire body. The Double Dee’s incorporate a compact tire body with crisp tread and separation for intense racing. Double Dee’s excel on outdoor hard packed clay surfaces with either dry or wet conditions. Double Dee’s are at their best when used on a surface with a blue grooved surface.

Features:

• Compact tire body with crisp tread and separation
• Aggressive square Double Dee lug technology
• Includes firm And-1 inserts

This is a packet of (2) 1/10 2.2" FLIP OUTS Rear Buggy Tires from JConcepts.

Flip Outs offer drivers a tire that is in-between Goose Bumps and Double Dees. Small pin construction makes up the foundation for the Flip Outs design and provides grip when racers need it most. When the conditions are wet and green in the morning, traction is sometimes hard to come-by; Flip Outs are the new choice.

Alternating center bar support provides the base for the forward traction while the small accommodating tapered pins provide the dig and flex under hard acceleration and cornering. Tire profile and interior ribbing design were all areas of focus while creating the combination of durability, functionality and performance.

Features:

• Compact tire body with crisp tread and separation
• Aggressive alternating center bar support
• Includes And-1 inserts

This is a packet of (2) 1/10 Soft Front CRUNCH Tires from 6MIK Racing including foam inserts.

This is a packet of (2) 1/10 GROOVY 2WD Front Buggy Tires from JConcepts.

The JConcepts Groovy 2wd front tire is perfect for a variety of track surfaces. The Groovy incorporates a compact tire body with sharp 4-rib separation for precise steering input and response.

Features:

• Green (Super Soft): For conditions with minimum traction. Works well on slippery, wet tracks.
• Compact tire body
• Sharp 4-rib separation
• Includes firm And-1 inserts

This is a packet of (2) 1/10 RIPs 2WD Front Buggy Tires from JConcepts.

Steering control and consistency is one of the most important aspects of 1/10th 2wd buggy racing. With the Rips front tire, JConcepts has optimized a 3 rib front tire design by altering the rib depth, attack angle and multiple radius corners to give 2wd racers a smooth new option. Tiny ribbing has been added on the upper sidewall to provide a fresh edge during hard and high impact corners. Already a high-performance tire the Rips in prototype form have been used to TQ at the Arizona State Championships and JConcepts Clash.

Features:

• Available in Soft (Blue), Super Soft (Green) and Indoor Soft (Gold)
• Compact tire body with optimized 3-rib design
• Sharp attack angle ribs with multiple radius corners
• Includes firm And-1 inserts

This is a packet of (2) 1/10 SuperSoft Rear REBAR Tires from AKA Racing.

The REBAR has been designed for indoor tracks, as well as hard packed, blue-grooved outdoor tracks.

The REBAR features double side rails on the edges of the tire that provide additional sidewall support, increasing side bite so your buggy stays planted in the turns.

The wide staggered center lugs give the REBAR incredible forward traction to hook up the power and launch your buggy out of the corners and over jumps.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Rear REBAR Tires from AKA Racing.

The REBAR has been designed for indoor tracks, as well as hard packed, blue-grooved outdoor tracks.

The REBAR features double side rails on the edges of the tire that provide additional sidewall support, increasing side bite so your buggy stays planted in the turns.

The wide staggered center lugs give the REBAR incredible forward traction to hook up the power and launch your buggy out of the corners and over jumps.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Rear VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Rear VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Rear IMPACT Tires from AKA Racing.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics.

The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable entering and exiting the turn.

NOTE: These tires do not include foam inserts.

Features

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Rear IMPACT Tires from AKA Racing.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics.

The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable entering and exiting the turn.

NOTE: These tires do not include foam inserts.

Features

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 4wd IMPACT Tires from AKA Racing.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics.

The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable entering and exiting the turn.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 4wd VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The staggered center bars on the 4WD front provide extra forward bite regardless of the direction of the lugs. The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Front 4wd VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The staggered center bars on the 4WD front provide extra forward bite regardless of the direction of the lugs. The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 2wd VEKTOR Tires from AKA Racing.

The VEKTOR tire features a low profile tread design which is ideal for hard packed indoor and outdoor tracks. The directional tire design allows you to choose between mild or aggressive handling characteristics depending on which way you run the tire.

The carcass design, lug size and lug spacing have been designed to provide a good balance between tire wear vs. traction, delivering a great value to the racer.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 2wd REBAR Tires from AKA Racing.

The REBAR has been designed for indoor tracks, as well as hard packed, blue-grooved outdoor tracks.

The REBAR features double side rails on the edges of the tire that provide additional sidewall support, increasing side bite so your buggy stays planted in the turns.

The wide staggered center lugs give the REBAR incredible forward traction to hook up the power and launch your buggy out of the corners and over jumps.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Front 2wd REBAR Tires from AKA Racing.

The REBAR has been designed for indoor tracks, as well as hard packed, blue-grooved outdoor tracks.

The REBAR features double side rails on the edges of the tire that provide additional sidewall support, increasing side bite so your buggy stays planted in the turns.

The wide staggered center lugs give the REBAR incredible forward traction to hook up the power and launch your buggy out of the corners and over jumps.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Front 2wd THREE RIB Tires from AKA Racing.

The THREE RIB is a long lasting and consistent 1/10 2wd front tire that has been designed to smooth out steering on medium to high-bite outdoor tracks.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft Front 2wd THREE RIB Tires from AKA Racing.

The THREE RIB is a long lasting and consistent 1/10 2wd front tire that has been designed to smooth out steering on medium to high-bite outdoor tracks.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 SuperSoft Front 4wd IMPACT Tires from AKA Racing.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics.

The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable entering and exiting the turn.

NOTE: These tires do not include foam inserts.

Features:

• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

This is a packet of (2) 1/10 Soft "EVO" TYPO Front 2WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.

The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.

NOTE: These tires are only compatible with AKA EVO 2WD front wheels.

Features:

• EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond. 
• EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
• Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
• Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.

This is a packet of (2) 1/10 SuperSoft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.

The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.

NOTE: These tires are only compatible with AKA EVO 4WD front wheels.

Features:

• EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond. 
• EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
• Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
• Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.

This is a packet of (2) 1/10 Soft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.

The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.

NOTE: These tires are only compatible with AKA EVO 4WD front wheels.

Features:

• EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond. 
• EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
• Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
• Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
• Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
• Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
• Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
• Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.