1/8 Off-Road Bodies
Introducing the Axis T Bruggy Edition race body for 1/8 Truck, a clean-sheet design from Pro-Line bringing a fresh new look to the class. Designed with the latest in CAD technology, the Axis T features an ultra-low-slung design with sharp lines throughout giving it an unmistakable look on the track. The Axis is a cab-forward design that provides enhanced steering response while the side ridges balance out the rear of the car with the ideal side-bite. The rear of the Axis body has the right amount of clearance for the motor and electronics and fits behind the front shock tower of your race truck.
Proudly Made in the USA, the Axis is made from durable polycarbonate material that will give you an edge over the competition. Paint-then-peel overspray film, window masks, and Pro-Line decals are included with the body. Hit the track in fresh, Pro-Line style with the Axis race body!
This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.
Features:
- Designed with the Latest in CAD Technology
- Ultra-Low-slung Design with Sharp Lines Throughout
- Enhanced Steering Response Combined with Ideal Side-Bite
- Paint-then-peel Overspray Film Built-in
- Made with Crystal Clear Polycarbonate
- Made in the USA, since 1982
Package includes:
- 1x Axis T Bruggy Edition Clear Body
- 1x Window Masks
- 1x Decal Sheet
Four Steps to Race-Ready:
- Clean Body and apply included window mask
- Paint then peel the over-spray film off
- Sticker your body (decal sheet included)
- Mount your new body onto your Truck
JConcepts unveiled a new body during the 2021 ROAR Fuel Nationals for the 1/8th truck division. The F2 body was constructed to perform at the highest level using the latest trend of reducing surface area above the shock tower line, reducing the overall weight while maintaining a tight silhouette. No stranger to Truggy bodies, the JConcepts team has developed a successful line of bodies with the Punisher and Finnisher designs, and each has excelled and peaked during ROAR championship events. For the 2021 event, the team focused on a behind tower concept body to fit 5 chassis configurations including the Mugen, Team Associated, TLR, HB, and Tekno.
What stands out on the JConcepts body is the raised nose that planes off the front shock tower. This design and styling were chosen over the buggy style mount to provide a better look, a cleaner and more durable fit and a better overall flow aerodynamically. To mount the F2 body, a carbon fiber adaptor is needed along with the Team Associated #81622 body mounts or Mugen #MUGE2148 (for MBX8T) to place the front of the body in correct position. Each truck has a specific adaptor produced in carbon fiber which bolts directly to the stock tower and once adding the (not included) body mount, provides a custom fit and beautiful finish.
The F2 name arrived after the team decided on using an existing style from the 1/10th stadium truck body already in the JConcepts line-up. The narrow shape, double upper railed cab with inner louvers are undeniable traits carried over to the new truggy performance body. The V-shape off the back of the cab is JConcepts fit, function, and styling from the get-go with a blend to recessed bed area for a low-slung base shape. A strategically placed spoiler outlet in the bed transitions to the mounting area.
The nose cone was prototyped to attach on multiple trucks and ultimately fixed in a protective and performance position. Complete the nose piece with included decal to give the truggy ROAR required headlight and grille placement. The side-pods inspired by the Silencer and Finnisher shells cover a variety of electrical and pipe layouts while showing-off the huge chamfer made popular by the team at JConcepts. The symmetrical pods finish at the body shell’s main structure while the dual and recessed side-windows maintain its unique and low-profile posture and ride-height.
The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep and detailed JConcepts decal sheet. The product is always backed by JConcepts customer service, support, and developed by professionals with style and authenticity.
JConcepts at the races –
The JConcepts team took on the ROAR Fuel Nationals and Ryan Maifield earned the TQ and victory in a stacked field at the highly competitive event held at LCRC Raceway in Oakland Mills, Pennsylvania. As the team only had 4 prototype shells available, the popularity and word of mouth grew large during the event creating a stir. Imposter body shells popped up after this event, however, JConcepts kept it on the track and in the results column. For the ROAR 1/8th E-Nationals held at SS Hobbies & Raceway in Tampa, Florida, it was once again, Ryan Maifield rising to the challenge with the F2 body, this time on the E-truck. The team racked up another TQ and overall 1st place making it two national titles in less than a months’ time.
Assembly notes –
To begin, install or mock-up the (not included) AE body mount #81622 or Mugen #MUGE2148 (for MBX8T) into the center position on the carbon fiber adaptor by using included hardware. Tighten the screw while allowing the mount to “notch” in to place to give the mount a vertical and stationary position. In some cases, depending on vehicle, the body mount may need to be completely installed to the adaptor first, due to hidden or closed-off screw locations. Once the mount is positioned, attach the carbon fiber adaptor to the shock tower using 3mm hardware and secured in to place with 3mm lock nuts.
Once the carbon fiber adaptor of choice is attached to the shock tower, review the instructions on body trimlines to accommodate the vehicle of choice. It is important to follow along to position body mount holes, perimeter cutlines and possible engine head cut-out and fuel tank openings to the appropriate vehicle. Once the carbon adaptor is in position and body is trimmed for the vehicle, the painting and detailing process can be completed in traditional fashion.
Package includes:
- 1 x pre-trimmed buggy body ready for the required polycarbonate paint
- Window masks
- Decals
Introducing the popular Axis style race body for TLR® 8ight™-X/E 2.0. The Axis series of race bodies is a clean-sheet design from Pro-Line and brings a fresh new look to the class. Designed with the latest in CAD technology, the Axis is a modern cab-forward design that provides enhanced downforce and jumping stability, while the included front wing adds steering response. This Axis fits both the nitro and electric configurations of the 8ight™-X 2.0, with plenty of clearance for all servo linkages and a full-size 4S battery.
Don't forget to submit your finished Pro-Line body to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!
This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.
Features:
- Modern Cab Forward Design
- Front Wing Included for Added Steering Response
- Enhanced Downforce and Jumping Stability
- Fits both Nitro and Electric 8ight™-X 2.0
- Made in the USA, since 1982
Package includes:
- 1x Axis Clear Body for TLR® 8ight™-X/E 2.0
- 1x Window Masks Material
- 1x Decal Sheet
The Punisher body by JConcepts for the TLR 8ight-X Elite is unique. As with all new and popular vehicles on the market, JConcepts wanted to deliver the best looking and performing body shell on the market. Throw everything you know out the window, the Punisher separates itself from the rest of the bodies on the market with its distinctive styling. In the hands of Dakotah Phend, the P1 body shell debuted at the 2020 Southern Indoor Championships.
In the development stage, the P1 was difficult, trying to slick out a design more powerful than the last. However, after fitment, discussion with newly acquired drivers, the form started to take shape. Incredibly low side-pod designs with an ultra-heavy chamfer are traditional looks for JConcepts, however, the power scoops along the cab add some overall muscle to the design, and that gets any racer wired.
The P1 has a broad cab and the placement moves it forward just behind the body mount and front shock tower. The new body was designed to turn and cut through the rough stuff with balance and precision. A centered roof “shark fin” is light and adds, tracking stability and rigidity to the tallest and most pressure sensitive area on the vehicle. Behind the cab, things begin to get interesting with an engine bay roof-top blended into rear kick-up winglets. The rear winglets strike where it gets hot, just behind the engine heat-sink and gives that last bit of downforce area prior to the rear shock tower.
Each P1 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage. Performance driven, battle tested – JConcepts is, World Proven Innovation and Design.
Features:
- Original – JConcepts P1 design
- Incredibly low side-pod layout
- Power scoops for added muscle
- Cock-pit “shark fin” for added stability
- Engine bay, roof-top
- Rear winglets for downforce
- Clear polycarbonate with protective film
- Includes window masks and decal sheet
Package includes:
- 1 x pre-trimmed buggy body ready for the required polycarbonate paint
- Window masks
- Decals
The curved-tip design allows the modeler to reach into corners and create sharp, smooth radius curves.
The ergonomic handle makes operation comfortable. Also useful as a regular pair of scissors. Every workbench should have a pair!
The curved-tip design allows the modeler to reach into corners and create sharp, smooth radius curves.
The ergonomic handle makes operation comfortable. Also useful as a regular pair of scissors. Every workbench should have a pair!
This tape can be used to re-enforce your bodies, protect your paint from wear, or to help protect your body and fuel tank from heat damage.
Bittydesign's Lexan mudguards are designed to help protect the rear driveshafts and shock components from dirt and other contaminants.
Molded from 1mm thick high quality Lexan® polycarbonate, they can be painted to match your paint scheme for that pro bling look!
- 1