Miscellaneous

This is a Crosshair Magnetic Body Mounting Kit from Protoform.

Have you ever painted up a killer race body, only to botch the mounting job by aligning it off-center, crooked, or too far forward or back on your chassis? Everyone has done this at least once. That's why the guys at PROTOform developed the PROTOform Crosshair Body Mounting Kit!
The PROTOform Crosshair Body Mounting Kit uses high-powered magnets to pinpoint the exact position of your car’s body posts. This simple but effective system is designed to make it easier to get your race body mounted up just the way you want it.

Here’s how it works:

1. Place a Crosshair Body Post Cap on each of your chassis’ 4 body posts, securing them in place with a body clip. (Not included)
2. Place your painted body on top of the posts, centering it from left to right as well as determining the fore/aft position, which can affect handling characteristics. (Standard position would be to center the front wheel opening trim line to the front axle of your chassis)
3. Hold a Marking Magnet on the outside of your body close to where the body posts are. The magnet will attach itself to the precise position.
4. Mark your body post position through the hole on the Marking Magnet with a fine-tip marker.
5. Drill your body post holes on the marked locations with a body reamer or power drill.

Voila! All the hassle and guesswork of mounting your race body is taken out of the equation. Now you can hit the track in style.

Features:

• Designed specifically for mounting painted r/c car bodies
• Pinpoint accuracy from high-powered magnets
• Made from high-quality red-anodized aluminum with convenient storage box
• Fits most on-road chassis body posts

Includes:

• 4x Crosshair Body Post Caps 
• 4x Marking Magnets 
• 1x Storage Box

This is a Pro-Line Body Grip Tool for painters. Tired of ruining your paint job with a fingerprint in the wet paint while trying to hold your pre-cut body? Well, struggle no more!

This stylish ergonomic Pro-Line Body Grip Tool helps painters like you hold the body effortlessly and comfortably. Choose to hold the body like a shifter knob for easy rotation or slide it in between your fingers at the narrow base to palm the body effortlessly like a cell phone.

Either way you grip it, you can rest assured that your RC body will no longer be a pain to hold while painting.

This is a custom machined tool made from Type 1 PVC and turned to match popular grip styles. The Body Grip tool includes 2 suction cups to easily adapt to many body sizes and shapes.

The large cup is a 60mm rated to hold 7 lbs and best used on the roof or windshield of larger scale bodies. The medium cup is a 45mm rated to hold 3 lbs and best used on the roof or windshield for small scale bodies or tight areas where the large cup may not fit. To finish it off the Body Grip tool has a stylish Pro-Line "Custom Paint"  decal.

Get this Pro-Line Body Grip Tool to make painting life easier! Just stick it and grip it!

• 4 x Body Clips/Pins
• 4 x Rubber retainers

• Thin, self-adhesive paper tape, developed for model applications.
• Flexible.
• Easily applied to curved surfaces making it ideal for masking off areas for painting, etc.
• Comes in a plastic, reusable dispenser.
• Dispenser teeth cuts the tape to your desired length.

• Thin, self-adhesive paper tape, developed for model applications.
• Flexible.
• Easily applied to curved surfaces making it ideal for masking off areas for painting, etc.
• Comes in a plastic, reusable dispenser.
• Dispenser teeth cuts the tape to your desired length.

• Thin, self-adhesive paper tape, developed for model applications.
• Flexible.
• Easily applied to curved surfaces making it ideal for masking off areas for painting, etc.
• Comes in a plastic, reusable dispenser.
• Dispenser teeth cuts the tape to your desired length.

• This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces.
• At just 1mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs.
• Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it.
• Plastic core ensures minimal dust is produced.
• Length: 18m
• Width: 1mm

• This is dedicated masking tape developed for plastic models.
• Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces.
• At just 2mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs.
• Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it.
• Plastic core ensures minimal dust is produced.
• Length: 18m
• Width: 2mm

• This is dedicated masking tape developed for plastic models.
• Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces.
• At just 3mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs.
• Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it.
• Plastic core ensures minimal dust is produced.
• Length: 18m
• Width: 3mm