Set-up Tools

Sort By:  
Fine tune your 1/10 On-Road Racer
Out of Stock
$139.95  Inc Tax
Compatible with TS50 ESC
$49.95  Inc Tax
For fine tuning your 1/10 & 1/8 On-Road Car
Out of Stock
$34.95  Inc Tax
For fine tuning your 1/10 On-Road Car
$24.95  Inc Tax
For fine tuning your 1/10 On-Road Car
$24.95  Inc Tax
Yeah Racing Aluminium Set-up System & Case (1/10 On-Road) (YR YT-0140BU)
This is the aluminium set-up station from Yeah Racing redesigned to give r/c racers accurate measurements for their 1/10 on road chassis's.

This version has improved looks and made even more lightweight. This time Yeah Racing have incorporated bearings to keep everything smooth so the friction of your setup surface will not prevent the setup system from getting an accurate measurement.

Features:
  • For: 1:10 EP/GP Cars
  • Material: Aluminium
  • Color: Blue
  • Measures: Camber, toe, steering angle and caster
  • Fully ball-bearing equipped set-up stands
  • Ultra-smooth, ultra-precise movement and operation
  • CNC machined aluminium

Packet Includes:
  • 4x CNC-Machined Alloy Side Plates
  • 4x CNC-Machined Alloy Camber Gauges
  • 1x Toe-in Gauge
  • 4x Camber Gauges Screws
  • 16x M3 x 8mm Head Screws
  • 16x 3 x 8 x 4mm Bearings
  • 4x Wheel Nuts
  • 1x Storage/Carry Case
  • 1x User manual

Fine tune your 1/10 On-Road Racer
Out of Stock
$139.95  Inc Tax
Gforce ProgBox Programmer (G0017)
This is a ProgBox Programmer by GForce for their (G0089) TS050 ESC.

The ProgBox Programmer allows you to program not only your GForce ESC, but it is also a LiPo battery monitor, a servo tester, a PC link for computer programming, and a KV/RPM tester!

This all in one programmer is small and easy to store in your pit bag, and is a must have for GForce ESC owners.

Features:
  • ESC Setting
  • LiPo battery Monitor
  • Input PPM Signal Monitor
  • Servo Tester
  • Monitor KV/RPM Tester
  • PC Interface - Link ESC to PC

Specification:
Input Voltage (ESC Setting)6-10V DC
Input Current (ESC Setting)500mA
Idle Current  (ESC Setting)< 20mA
Operating Temperature0-40ºC
Strage Temperature-10 - 60 ºC
Operating Humidity10 - 90%RH
Strage Humidity20 - 75%RH
Dimension85x48.5x11.8mm
Weight40g



Compatible with TS50 ESC
$49.95  Inc Tax
Yeah Racing Chassis Downstops and Height Measuring Set (YR YT-0071BU)
This is a Chassis Downstops & Height measuring kit from Yeah Racing for 1:8 / 1:10 On Road.

Features:
    1. For: 1:8 / 1:10 On Road
    2. Material: Aluminium
    3. Color: Blue

Packet includes:
    1. 2x Droop Gauge Support Block
    2. 1x Droop Gauge
    3. 1x Height Gauge
    4. 1x Manual



For fine tuning your 1/10 & 1/8 On-Road Car
Out of Stock
$34.95  Inc Tax
Yeah Racing Ultra Fine Ride Height & Droop Gauge (Blue) (YR YT-0068BU)
This is an ultra fine ride height and droop gauge for 1/10 nitro and electric touring cars from Yeah Racing.

Unlike the normal ride height gauges, which offer only increments of 0.5mm; this ride-height measurement offers super-precise increments of 0.2mm!

The measurement ranges from 3.6mm to 8mm, allowing very precise adjustment of the front and rear ride height.

The suspension droop can be easily measured by rotating it 90 degrees. The stepped surfaces range from 1mm to 9mm.

Stepped surfaces from 5mm onwards provide 0.2mm increments for fine adjustment!

This tool is CNC-machined from high-quality aluminium, giving it a lightweight and shiny outlook! It¡¦s a must have for all RC enthusiasts!

Features:
    1. For: Standard 1/10 RC touring car chassis
    2. Material: Aluminium
    3. Color: Blue
    4. Height measurement: 3.6mm - 8mm in 0.2mm increments.
    5. Droop measurement (from the chassis height): 1mm - 5mm in 0.5mm increments, 5mm-9.2mm in 0.2mm increments.
    6. Laser markers.



For fine tuning your 1/10 On-Road Car
$24.95  Inc Tax
Yeah Racing Ultra Fine Ride Height & Droop Gauge (Black) (YR YT-0068BK)
This is an ultra fine ride height and droop gauge for 1/10 nitro and electric touring cars from Yeah Racing.

Unlike the normal ride height gauges, which offer only increments of 0.5mm; this ride-height measurement offers super-precise increments of 0.2mm!

The measurement ranges from 3.6mm to 8mm, allowing very precise adjustment of the front and rear ride height.

The suspension droop can be easily measured by rotating it 90 degrees. The stepped surfaces range from 1mm to 9mm.

Stepped surfaces from 5mm onwards provide 0.2mm increments for fine adjustment!

This tool is CNC-machined from high-quality aluminium, giving it a lightweight and shiny outlook! It¡¦s a must have for all RC enthusiasts!

Features:
    1. For: Standard 1/10 RC touring car chassis
    2. Material: Aluminium
    3. Color: Black
    4. Height measurement: 3.6mm - 8mm in 0.2mm increments.
    5. Droop measurement (from the chassis height): 1mm - 5mm in 0.5mm increments, 5mm-9.2mm in 0.2mm increments.
    6. Laser markers.



For fine tuning your 1/10 On-Road Car
$24.95  Inc Tax
Per Page      1 - 5 of 5
  • 1