Miscellaneous

Sort By:  
53.4 cm x 50.8 cm x 34.3 cm
$475.00  Inc Tax
Fine tune your 1/10 On-Road Racer
Out of Stock
$139.95  Inc Tax
Fits most 1/8 Scale 17mm hex wheels
Out of Stock
$99.95  Inc Tax
Perfect for the cold days at the track to keep you warm in style!
Out of Stock
$69.95  Inc Tax
Hold up to 25 Shock oil bottles
$69.95  Inc Tax
Clean and convenient way to transport your buggy
Out of Stock
$59.95  Inc Tax
Clean and convenient way to transport your buggy
Out of Stock
$59.95  Inc Tax
Balance most 12mm hex and 17mm hex wheels
Out of Stock
$49.95  Inc Tax
Can also be used with Nitro Buggies
$40.00  Inc Tax
$49.95
7mm and 5.5mm wrench in one!
Out of Stock
$39.95  Inc Tax
For 1/8 Scale 17mm hex wheel nuts
Out of Stock
$39.95  Inc Tax
Practical and looks amazing
$39.95  Inc Tax
Easy to cut out those precision decals
$34.95  Inc Tax
Easy to place those precision decals
$32.95  Inc Tax
Tidy up your pit area
$30.00  Inc Tax
$59.95
For punching vent holes in tires from 1:10 to 1:5 scale
Out of Stock
$29.95  Inc Tax
Great for marking out rock crawling trails
Out of Stock
$29.95  Inc Tax
Peak current 14A, continous 8A
$28.95  Inc Tax
Keep your 540 motors organised
$28.95  Inc Tax
May also fit other kits
$26.95  Inc Tax
For fine tuning your 1/10 On-Road Car
$25.00  Inc Tax
$29.95
For fine tuning your 1/10 On-Road Car
$25.00  Inc Tax
$39.95
Great for trimming tire spikes
Out of Stock
$24.95  Inc Tax
Great for trimming tire spikes
Out of Stock
$24.95  Inc Tax
Includes Tire Bands and Glue Tube
Out of Stock
$22.50  Inc Tax
Perfect in your pit for dispensing liquids
$19.95  Inc Tax
Great for when building new kits
Out of Stock
$19.95  Inc Tax
Great for trimming tire spikes
$19.95  Inc Tax
Makes gluing tires easier
$19.95  Inc Tax
CA specifically formulated for gluing tires.
Out of Stock
$18.50  Inc Tax
CA specifically formulated for gluing tires.
$18.50  Inc Tax
(Φ5/2 Bulbs/L=400/Clear)
$16.95  Inc Tax
Keep dirty cars from spreading after racing
Out of Stock
$14.95  Inc Tax
Self closing tweezers
$14.95  Inc Tax
150mm Steel Ruler
$14.95  Inc Tax
Built-in lock for extra safety
$14.95  Inc Tax
Increase rear traction on your 1/10 Touring car
Out of Stock
$14.50  Inc Tax
Keep dirty cars from spreading after racing
Out of Stock
$13.50  Inc Tax
High Current 4mm Banana Plug
Out of Stock
$12.95  Inc Tax
Includes various sizes and colours
$10.50  Inc Tax
Keep all your 1/8 Off-Road tires tidy
Out of Stock
$9.95  Inc Tax
Keep all your 1/8 Off-Road tires tidy
Out of Stock
$9.95  Inc Tax
Durable plastic with a single latch
$8.95  Inc Tax
Durable plastic with a single latch
$8.95  Inc Tax
Intended for use with AKA Premium Glue Bottles
Out of Stock
$7.95  Inc Tax
Use on motor wires for easy motor removal
Out of Stock
$7.95  Inc Tax
Keep your small parts organised
Out of Stock
$7.50  Inc Tax
Can be used with nearly any wheel balancer
$7.25  Inc Tax
Suitable for mounting up all 1/10 scale and 1/8 scale
Out of Stock
$6.95  Inc Tax
Strengthen your 1/10 On-Road Body
$5.00  Inc Tax
$10.00
Avoid Chassis Tweak on 1/10 On-road cars
$4.00  Inc Tax
$7.50
Avoid Chassis Tweak on 1/10 On-road cars
$4.00  Inc Tax
$7.50
Pro-Line Hauler Bag (PRO 6058-03)
This is a Hauler Bag from Pro-Line.

The Pro-Line Hauler Bag is here! Designed with 4 easy access drawer compartments, several zipper pockets and tool storage, the Pro-Line Hauler Bag is perfect for your RC needs.

Stylish Pro-Line logos on the front, top and side stand out when arriving at the track and a collapsible pull handle and smooth rolling casters combine to get you organized in the pits.

The new Hauler Bag also includes tie-down Bungee straps for securing 1 vehicle (Buggy, SC, Truck, etc.) on top of the Bag for fewer trips between the Track and your vehicle. Get your own Pro-Line Hauler Bag today!

  • High grade nylon construction
  • Exterior Dimension: 21"(53.4cm) W x 20"(50.8cm)H x 13.5"(34.3cm) D
  • 4 easy access drawers:
    1 Large - 20"W x 8"H x 12.5"D
    1 Medium - 20"W x 5"H x 12.5"D
    2 Small - 10"W x 5"H x 12.5"D
  • Zipper and Velcro® compartments
  • Tool organizer
  • Retractable handle combine with smooth casters for easy transportation


53.4 cm x 50.8 cm x 34.3 cm
$475.00  Inc Tax
Yeah Racing Aluminium Set-up System & Case (1/10 On-Road) (YR YT-0140BU)
This is the aluminium set-up station from Yeah Racing redesigned to give r/c racers accurate measurements for their 1/10 on road chassis's.

This version has improved looks and made even more lightweight. This time Yeah Racing have incorporated bearings to keep everything smooth so the friction of your setup surface will not prevent the setup system from getting an accurate measurement.

Features:
  • For: 1:10 EP/GP Cars
  • Material: Aluminium
  • Color: Blue
  • Measures: Camber, toe, steering angle and caster
  • Fully ball-bearing equipped set-up stands
  • Ultra-smooth, ultra-precise movement and operation
  • CNC machined aluminium

Packet Includes:
  • 4x CNC-Machined Alloy Side Plates
  • 4x CNC-Machined Alloy Camber Gauges
  • 1x Toe-in Gauge
  • 4x Camber Gauges Screws
  • 16x M3 x 8mm Head Screws
  • 16x 3 x 8 x 4mm Bearings
  • 4x Wheel Nuts
  • 1x Storage/Carry Case
  • 1x User manual

Fine tune your 1/10 On-Road Racer
Out of Stock
$139.95  Inc Tax
Team Losi Racing 1/8 Precision Tire Balancer with Balancing Clay (LOSA99176)
This is a Precision 1/8 Tire Balancer from Team Losi Racing.

Features:
    • Precision Tire Balancer helps to extend the life of your wheels, tires, drivetrain components, shock absorbers and fuel mileage Constructed from lightweight, durable high-grade aluminium
    • Innovative design allows the balancer to easily disassemble for compact transportation and storage in its reusable container
    • Precision Tire Balancer will balance any wheel with a 17mm hex
    • Ergonomically designed so the inside of the wheel being balanced faces out for hassle-free balancing
    • 3 ounces of balancing clay included
Fits most 1/8 Scale 17mm hex wheels
Out of Stock
$99.95  Inc Tax
AKA Racing Black Sweatshirt Hoodie (Medium) (AKA 98104M)
This is an AKA Hoodie featuring a large logo on the front and the 3 Diamond design down the outside of the right sleeve, printed on a Hanes 100% cotton heavyweight sweatshirt.

Perfect for the cold days at the track to keep you warm in style!

Perfect for the cold days at the track to keep you warm in style!
Out of Stock
$69.95  Inc Tax
Jconcepts Finish Line Shock Oil Bag (JCO 2811)

This is a Finish Line Shock Oil Bag from Jconcepts.

An organized racing bag, pit area or workstation is highly under-rated. The JConcepts team believes in organization and that extends to tuning bits and items like oil. It is common for racers to have multiple weight shock oils and with the increased use of fluid filled diffs and large volume shocks, racers accumulate a lot of oil bottles. Thankfully JConcepts has added the shock oil bag to the line-up featuring a semi-rigid liner, woven technical appearing fabric and high-density foam insert built to handle up to 25 bottles.

The lid features a pocket on the inside for notes, instructions sheets or setup guides and has a handy Velcro closure. The Finish Line oil bag has a lot of functionality thanks to racers like Paul Wynn, Spencer Rivkin and Ryan Maifield always experimenting and asking for more. The bag is constructed with heavy-duty zipper closures and a top handle for easy handling and carrying ability. The item is topped off with embroidered JConcepts Finish Line logo for brand loyalty and authenticity. Get organized, stay in style with JConcepts.

 

Features:

  • Compact size, great for storage
  • Composite, semi-rigid liner
  • High density foam with staggered hole placement
  • Inner pocket for additional storage
  • Luxurious Woven fabric for high-end looks
  • Rugged handle, and strap
  • Embroidered JConcepts logo
  • Heavy-duty stitching throughout

Hold up to 25 Shock oil bottles
$69.95  Inc Tax
ProTek RC 1/10 Buggy Carrier Bag (PTK-8113)

The ProTek R/C 1/10 Buggy Carrying Bag is a clean and convenient way to transport your buggy.

Designed for racers looking for a convenient solution to transport an electric 1/10 buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.

The ProTek R/C Carrying Bag is big enough to fit one 1/10 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.

The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your workshop. At the races, roll the bag up until you need it again.

Features:

  • Fits 1/10 buggies with tires on
  • Contains all dirt and grime inside
  • Foam padded
  • Carry-on sized for flights
  • Can be rolled up when not in use
  • Convenient side carrying handle
  • Can be used with optional shoulder strap

Specifications:
Fits: 
1/10 buggy w/body and w/tires
Dimensions (W x L x H): 28 x 41 x 11cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included


NOTE: Buggy in pictures is for display purposes only and is not included.
Clean and convenient way to transport your buggy
Out of Stock
$59.95  Inc Tax
ProTek RC 1/8 Buggy Carrier Bag (PTK-8114)

The ProTek R/C 1/8 Buggy Carrying Bag is a clean and convenient way to transport your buggy.

Designed for racers looking for a convenient solution to transport a nitro or electric buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.

The ProTek R/C Carrying Bag is big enough to fit one 1/8 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.

The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.

Features:

  • Fits 1/8 buggies with tires on
  • Contains all dirt and grime inside
  • Foam padded
  • Carry-on sized for flights
  • Can be rolled up when not in use
  • Convenient side carrying handle
  • Can be used with optional shoulder strap

Specifications:
Fits: 
1/8 buggy w/body and w/tires
Dimensions (W x L x H): 34 x 45.5 x 14.5cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included


NOTE: Buggy in pictures is for display purposes only and is not included.
Clean and convenient way to transport your buggy
Out of Stock
$59.95  Inc Tax
AKA Racing 2 In 1 Handheld Wheel Balancer with Clay (AKA 44006)
This is the 2 in 1 handheld wheel balancer from AKA Racing.

The 2 in 1 handheld wheel balancer has been meticulously engineered to balance most 12mm hex and 17mm hex wheels, including 1:10 buggy, short course, 1:8 buggy and truggy (not compatible with stadium truck).

The sleek, lightweight design fits in any toolbox without taking up much room.

Package includes :
    • 1x balancer
    • 1x block of balancing clay



Balance most 12mm hex and 17mm hex wheels
Out of Stock
$49.95  Inc Tax
ProTek RC 1/8 Truggy Starter Box Carrying Bag (PTK-8116)

The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring 1/8 scale nitro Truggy to and from the pits, with straps optimized for truggy use. 

Truggy tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your arm while you’re balancing the truck atop the starter box. Not to mention, the fumes that smack you in the face with every rev of the engine. ProTek R/C’s Starter Box Carrying Bag allows you to comfortably carry your nitro truggy at your side when moving in and out of pit row. The Carrying Bag also frees up your other hand while putting the weight of the truggy and starter box much lower in a more natural position - your arm will thank you!

The all canvas Starter Box Carrying Bag features an interior liner and two handle straps designed not to interfere with truggy tires. The front straps are also attached close to the corner to stay clear of the pipe stinger. Inside the bag, the liner is fuel resistant and easily cleans up when things get messy.

The carrying bag will accommodate most popular starter boxes including: ProTek R/C SureStart, OFNA 1/10 & 1/8 starter boxes, Mugen Seiki Pro Starter BIII, LRP 1/10 & 1/8 Spec 2, Hudy “Star-Box”, Team Associated Compact 1/10 & 1/8 starter boxes and Team Losi 8IGHT & 8IGHT-T starter boxes. Make it easy on your pit guy and grab a ProTek R/C Starter Box Carrying Bag.

Features:

  • Durable, heavy-duty bag material
  • Dual handles won't interfere with tires
  • Safe, one handed pit operation
  • Straps optimized for truggy use
  • No fumes in your face
  • Compatible with boxes up to 14cm wide x 36.8cm long
  • Made in the USA

Compatible Starter Boxes:
PTK-4500: ProTek R/C "SureStart"
TLR99059: TLR 8IGHT/8IGHT-T
HUD104500: Hudy "Star-Box"
OFN10244: OFNA Truggy Box
OFN10245: OFNA 1/10 & 1/8
LRP37101: LRP 1/10 & 1/8 Spec 2
MUGB0237: Mugen Pro Starter BIII
ASC1751: Team Associated Compact 1/10 & 1/8


NOTE: Truggy in pictures is for display purposes only and is not included.
Can also be used with Nitro Buggies
$40.00  Inc Tax
$49.95
AKA Racing Double Play Nut Diver (5.5mm & 7mm) (AKA 44004)
This is the Double Play Nut Driver, with a 5.5mm and 7mm driver from AKA Racing.

The Double Play nut driver creatively lightens your toolbox by putting a 7mm and 5.5mm wrench in one!

The 7mm driver fits metric wheel nuts found on most popular 1/10 buggies and short course trucks, while the 5mm driver is common for shock nuts and most nuts on metric 1/8 cars.

The machined aluminium handle and sleeve provides weight reduction over standard steel tools with the added durability of a hard anodized finish.
7mm and 5.5mm wrench in one!
Out of Stock
$39.95  Inc Tax
AKA Racing 17mm T-Handle Hex Wrench (AKA 44005)
This is a 17mm T-Handle Hex Wrench from AKA Racing.

The AKA 17mm 1:8 Wheel Wrench is impeccably machined, with a black anodized aluminium handle for durability.

The business end of the wrench has been bright red anodized, and optimized to fit all open and enclosed face wheel nuts.

The oversized handle features laser etched AKA logos and fits nicely into the palm of your hand, offering plenty of leverage to get those over-tightened nuts off in a breeze.

For 1/8 Scale 17mm hex wheel nuts
Out of Stock
$39.95  Inc Tax
AVID Racing Concepts Soldering Jig (Carbon Fiber) (AVD AV1412)
This is a Carbon Fiber Soldering Jig from AVID Racing Concept.

The Avid Soldering Jig is made out of carbon fiber and spring loaded to help hold Deans/XT60/Bullet plugs as well as wire.

Specifications:
  • Comes assembled.
  • Spring loaded to hold items while you solder them.
  • Rubber feet to make sure it stays in place.


Practical and looks amazing
$39.95  Inc Tax
Tamiya Decal Scissors (TAM 74031)
This is a pair of Decal Scissors, from Tamiya.






Easy to cut out those precision decals
$34.95  Inc Tax
Tamiya Decal Tweezers (TAM 74052)
This is a pair of Decal Tweezers from Tamiya.

Makes installing decals easy without getting dirty finger prints on them.










Easy to place those precision decals
$32.95  Inc Tax
AVID RC Aluminium Parts Tray | 140x75mm (AVD AV-PT3)
This is an Aluminum Parts Tray from AVID Racing Concepts for easy placement anywhere in your pit area.

The 140x75mm Aluminium Parts Tray features 4 cavities in a small footprint design focused for easy placement anywhere in your pit area.


Specifications:

  • Features 4 cavities at 140x75mm
  • Aluminium black anodized with silver highlights
  • Internal rounded edges for easy part removal
  • Avid logo laser etched at each end
  • Includes 4 rubber feet, and 1 small Avid decal
Tidy up your pit area
$30.00  Inc Tax
$59.95
AKA Racing Pro Multi-Tip Tire Punch (AKA 44010)
This is the Pro Multi-Tip Tire Punch from AKA Racing used for for punching vent holes in tires from 1:10 all the way to 1:5 scale .

Features:
    1. Six forged steel tips: 2.5mm / 3.0mm / 3.5mm / 4.0mm / 4.5mm / 5.0mm
    2. Constructed of high-strength-steel which is powder-coated black to help withstand the abuse at the track and help protect against rust
    3. A spring loaded comfort handle for ease of use
    4. Locking lever for protection when not in use


For punching vent holes in tires from 1:10 to 1:5 scale
Out of Stock
$29.95  Inc Tax
Boom Racing Rubber Traffic Cones with Reflective Decal Trail Marker / Track Accessory (10) Orange (BR SCAC301OR)
This is a set of (10) real rubber 1/10 traffic cones from Boom Racing which are great for adding realism when marking out trails for Rock crawlers etc.

Built as two separate pieces. Base is molded with a harder rubber and the cone has the same texture as 1:1 cones.

Features:
  • Designed with anti-slip base to hold on a 45 degree angle
  • Reflects light
  • Use as gates / trail marker / track accessory / garage decoration

Size:
  • Height: 80mm
  • Width: 43mm

Includes:
  • 10 x 1/10 scale rubber cones
  • 10 x Reflective decal sheet

Color:
  • Orange



Great for marking out rock crawling trails
Out of Stock
$29.95  Inc Tax
GT Power Electronic Switch with LED (GT-eSwitch)
This is an Electronic Switch with LED from GT Power.

Features:
Compact and extremely portable
Protect your battery away from damage of discharge and overcharge
High quality and durable in use
Use LED to display the test condition

Specification:
Brand name: G.T.POWER
Weight: 10g
Dimension: 43 x 33 x 9mm
Display: LED
Input Voltage: 5V-10V (Lipo 2S or NiCd/NiMh 4-8S)
Max Peak Current: 14A
Max Continuous Current: 8A


When the power is disconnected then reconnected to the switch, the switch will return to its previous state (on or off)

Its recommended NOT to use lipo mode with electronic switches in IC Car's, as when the voltage cuts, it can cause a runaway.


Peak current 14A, continous 8A
$28.95  Inc Tax
JConcepts 540 Motor Storage Case with Foam Liner (Black) (JCO 2497-2)
This is the JConcepts Motor or Rotor Storage Case for 540 sized cans.

Being organized is the name of the game. The best organized, best prepared racers are typically the ones reaching for that top step of the podium. JConcepts has reached into their bag of tricks to help racer organization. The motor | rotor box includes plenty of space for assembled motors, individually spaced rotors and a pocket for miscellaneous motor tuning items.

The motor/rotor box has a small footprint which makes it ideal for short trips with minimal amounts of space. Inside the box is roomy enough for three assembled motors and cushioned with high-impact foam that allow the items to lay in a bed like a cradle during rest periods. At the other end, five areas can house rotors and the pocket at the end gives all-important extra storage. The foam insert material has a grabby feel and allows the user to manipulate to grab needed items. The custom built storage box, molded black in color has JConcepts.net logo for authenticity and built-in plastic latch for easy open and close operation.

Note – rotors are extremely magnetic and setting them in the cradle can be tricky. Enter and remove with ease and patience and maintain separation until they are resting in their individual cradles.

Features:
  • Innovative design, durable material
  • Fits, three assembled motors, five rotors
  • Miscellaneous storage pocket
  • High-impact and steady foam cradle
  • Finger tip and grip access
  • Handy, built-in latch


Keep your 540 motors organised
$28.95  Inc Tax
Kyosho LED Light Bulb Set (2): Scorpion 2014 kit (KYO KP SCW018)
This is a packet of (2) Clear LED Lights from Kyosho.

This is an optional LED Light Bulb Set from Kyosho for their Scorpion 2014 kit. 

These lights are used in combination with the Kyosho Light Bucket Set (KYO KP SCW017) and Light Bucket Compatible Roll Cage (KYO KP SCW015).



May also fit other kits
$26.95  Inc Tax
Spec-R Aluminium Body Height Adjusters (Blue) (SPR053-BAL)
Blue anodized aluminium body height adjusters from Spec-R for 1/10 touring cars.
For fine tuning your 1/10 On-Road Car
$25.00  Inc Tax
$29.95
Spec-R Aluminium Body Height Adjusters (Red) (SPR053-BAR)
Red anodized aluminium body height adjusters from Spec-R for 1/10 touring cars.
For fine tuning your 1/10 On-Road Car
$25.00  Inc Tax
$39.95
Excel Soft Grip Sprue Cutter (Black) (EXC 55595)
This is a pair of Black Soft Grip Sprue Cutters from Excel.


Great for trimming tire spikes
Out of Stock
$24.95  Inc Tax
Excel Soft Grip Sprue Cutter (Blue) (EXC 55594)
This is a pair of Blue Soft Grip Sprue Cutters from Excel.


Great for trimming tire spikes
Out of Stock
$24.95  Inc Tax
AKA Racing Premium CA Tire Gluing Kit (AKA 44003)
This is the Off-Road Tire Gluing Kit from AKA Racing.

The AKA tire gluing kit includes one bottle of AKA Premium Tire Glue and four AKA Tire Mounting Bands that are suitable for mounting up all 1:10 and 1:8 off-road tires. 


This medium viscosity CA glue has been formulated to bond plastic to rubber and it does with tenacity.

As with any CA glue, we suggest that you store your bottle of Premium Tire Glue in a cool dry place such as a refrigerator to keep it fresh.
Includes Tire Bands and Glue Tube
Out of Stock
$22.50  Inc Tax
AKA Racing Mini Pump Bottle with Locking Cap (AKA 44008)
The Mini Pump Bottle with Locking Cap from AKA Racing is perfect in your pit for dispensing liquids such as, body cleaners, tire sauce, tire cleaners, etc.

Pop the lid open, twist to unlock, and press down with a towel or cloth to dispense contents.

Works perfect for cleaning tire beads during the mounting process and many more applications.

Perfect in your pit for dispensing liquids
$19.95  Inc Tax
HobbyPro M3 Hand Tap (HBP H260)
This is a M3 Hand tap from HobbyPro to cut a thread in holes while building new kits.


Great for when building new kits
Out of Stock
$19.95  Inc Tax
Xceed Sprue Cutter (Black) (XCE 106508)
This is a pair of Black Sprue Cutters from Xceed.
Great for trimming tire spikes
$19.95  Inc Tax
Team Losi Racing Glue Tips (20) (TLR76005)
This is a packet of 20 Glue Tips from Team Losi Racing.

The TLR package of glue tips is a universal precision applicator tip to help aid in getting glue in the small areas you need, and not where you don't.

The 25mm long tip will allow for a longer life by having the ability to cut dried glue off and reuse the tip multiple times before being disposed of.


Package includes:
  • 20 x glue tips
Makes gluing tires easier
$19.95  Inc Tax
AKA Racing Premium CA Tire Glue (20g) incl glue tube (AKA 38001)
This is a 20g bottle of AKA Racing Premium CA Tire Glue. This CA was specifically formulated for gluing tires.

This medium viscosity CA glue has been formulated to bond plastic to rubber and it does with tenacity.

As with any CA glue, we suggest that you store your bottle of Premium Tire Glue in a cool dry place such as a refrigerator to keep it fresh.
CA specifically formulated for gluing tires.
Out of Stock
$18.50  Inc Tax
Team Losi Racing Premium CA Tire Glue (28g) incl 2 glue tubes (TLR76007)
This is a 28g bottle of Premium CA Tire Glue from Team Losi Racing. This CA was specifically formulated for gluing tires.

This medium viscosity CA glue has been formulated to bond plastic to rubber and it does with tenacity.

As with any CA glue, we suggest that you store your bottle of Premium Tire Glue in a cool dry place such as a refrigerator to keep it fresh.

Package includes:
  • 1 x 28g bottle of medium viscosity CA glue
  • 2 x glue tips

CA specifically formulated for gluing tires.
$18.50  Inc Tax
Kyosho LED Clear Light Unit (2) (KYO KP 97054-2B)
This is a packet of (2) Clear LED Lights from Kyosho.



(Φ5/2 Bulbs/L=400/Clear)
$16.95  Inc Tax
AKA Racing Cinch Sack (Large) (AKA 98304)

This is the Large size AKA Racing Cinch Sack.

The large size Cinch Sack is ideal for SC trucks or 1:8 truggies while the medium will fit 1:10 buggies, 1:8 buggy (without tires and wing), or tires.

Both are made of durable nylon and feature the iconic AKA logo screen printed on the front. The draw string and clasp will keep your cargo tightly secured and dirt confined to the bag.

Features:

  • Available in two sizes Medium (34.3x61cm), and Large (51x76cm)
  • Medium size Cinch Sack is ideal for 1:10 buggies, 1:8 buggy (sans tires and wing), or tires
  • Large will fit SC trucks or 1:8 truggies
  • Made of durable nylon and with the iconic AKA logo on the front
  • Draw string and clasp will keep your cargo secured and the dirt confined to the bag
Dimensions:
Medium: 
34.3x61cm (13.5x24")
Large: 
51x76cm (20x30")
Keep dirty cars from spreading after racing
Out of Stock
$14.95  Inc Tax
Excel Helping Hand Tweezer (6") (EXC 70025)
This is a pair of 6" Helping Hand Tweezers from Excel.


Self closing tweezers
$14.95  Inc Tax
Excel Stainless Steel Ruler (150mm) (EXC 55677)
This is a pair of 150mm Stainless Steel Ruler from Excel.


150mm Steel Ruler
$14.95  Inc Tax
AVID Racing Concepts Servo Wire Extension with Lock (Black) (AVD AV1417-150)
This is a black servo wire extensions with a built-in lock for extra safety from AVID Racing Concepts.

Specifications:
  • All black servo wire extensions with a locking latch



Built-in lock for extra safety
$14.95  Inc Tax
Yeah Racing Aluminium High Downforce Body Posts (Blue) (YR YA-0199V2BU)
This is a packet of (2) Blue Aluminium High Downforce Body Posts from Yeah Racing designed to transfer the wings down-force more efficiently through the rear body posts.

Increase your cars traction through enhancing rear down-force. Recommended for use on high speed tracks with a low to medium traction surface.

 In order to tune the down force and stability on the road there are 2 sets of clipping holes 6mm apart on the Hi Down-force Body Post. Providing an optional position adjustment of the body shell from 4mm gap to 2mm gap therefore to increases or decreases the down-forces more accurately.

Features:
    1. For: 4mm to 5mm Body Post
    2. Material: Aluminium
    3. Color: Blue 
Packet includes:
    1. 2x High Down-Force Body Post
    2. 2x Set Screws
Increase rear traction on your 1/10 Touring car
Out of Stock
$14.50  Inc Tax
AKA Racing Cinch Sack (Medium) (AKA 98303)

This is the Medium size AKA Racing Cinch Sack.

The medium size Cinch Sack is ideal for 1:10 buggies, 1:8 buggy (without tires and wing), or tires, while the large will fit SC trucks or 1:8 truggies.

Both are made of durable nylon and feature the iconic AKA logo screen printed on the front. The draw string and clasp will keep your cargo tightly secured and dirt confined to the bag.

Features:

  • Available in two sizes Medium (34.3x61cm), and Large (51x76cm)
  • Medium size Cinch Sack is ideal for 1:10 buggies, 1:8 buggy (sans tires and wing), or tires
  • Large will fit SC trucks or 1:8 truggies
  • Made of durable nylon and with the iconic AKA logo on the front
  • Draw string and clasp will keep your cargo secured and the dirt confined to the bag
Dimensions:
Medium: 
34.3x61cm (13.5x24")
Large: 
51x76cm (20x30")
Keep dirty cars from spreading after racing
Out of Stock
$13.50  Inc Tax
Yeah Racing 4mm High Current Banana Plug Connector Set (Female)(10) (YR BC-0011)
This is a packet of (10) 4mm High Current Connector Female Banana Plugs from Yeah Racing.

Features:
    1. Color: Gold
    2. Made in high quality BRASS which reduce electrical resistance and enhance conductivity.
    3. Single-piece design offers 60% more of connection surface than regular plug, and minimize over-heat issue from bad connection
    4. Connector in size 4mm which is compatible with most common banana plug battery

Specification:
    1. Diameter: 4mm
    2. Length: 20.5mm

Packet includes:
    1. 10x 4mm High Current Connector Female Banana Plugs

High Current 4mm Banana Plug
Out of Stock
$12.95  Inc Tax
AVID RC Small Hinged Plastic Doodad Container | 5pcs (AVD AV-DOODAD)
This is a packet of (5) small hinged branded plastic doodad containers from AVID Racing Concepts for storing all your small parts in a handy container.

This pack of 5 small hinged branded plastic doodad containers are great for those small items in your tool box that just need a tad bit more of that OCD attention to detail. We have been using this container for years now for our engine bearing line etc. They come in so handy when you just need a small container for that slipper rebuild, piston change, or engine bearing swap yet you don't want the part to mingle with the other parts in your screw container.


Specifications:

  • Outside: Diameter = 30.0mm X Height = 11.2mm
  • Inside: Diameter = 26.9mm X Height = 9.4mm


Packet of 5
$12.00  Inc Tax
AKA Racing Decal Sheet (Large) (AKA 98201)
This is a Large AKA Racing Decal Sheet.

Includes various sizes and colours
$10.50  Inc Tax
Yeah Racing Aluminium Tire Holder (1/8) (Blue) (YR YA-028BU)
This is a Blue Aluminum Tyre Holder from Yeah Racing for conveniently carrying/storing 1:8 Off Road Car tires.

Features:
  • For: 1:8 On Road Car
  • Material: A6061 Aluminium
  • Color: Blue

Packet include:
  • 1x Aluminium Tyre Holder
Keep all your 1/8 Off-Road tires tidy
Out of Stock
$9.95  Inc Tax
Yeah Racing Aluminium Tire Holder (1/8) (Black) (YR YA-028BK)
This is a Black Aluminum Tyre Holder from Yeah Racing for conveniently carrying/storing 1:8 Off Road Car tires.

Features:
  • For: 1:8 On Road Car
  • Material: A6061 Aluminium
  • Color: Black

Packet include:
  • 1x Aluminium Tyre Holder
Keep all your 1/8 Off-Road tires tidy
Out of Stock
$9.95  Inc Tax
AVID RC Parts Box | 8 Bin | 137x68x28mm (AVD AV10085-8s)
This is an 8 compartment plastic parts box from AVID Racing Concepts for storing all your small parts in a handy container.


Specifications:

  • Durable plastic with a single latch and 8 compartment bins
  • Branded with Avid's new logo in the bottom right corner
  • Dimensions: 137x68x28mm


Durable plastic with a single latch
$8.95  Inc Tax
AVID RC Parts Box | 1 Bin | 144x84x34mm (AVD AV10085-1)
This is a single compartment plastic parts box from AVID Racing Concepts for storing all your small parts in a handy container.


Specifications:

  • Durable plastic with a single latch and 1 compartment bin.
  • Branded with Avid's new logo in the bottom right corner.
  • Dimensions: 144x84x34mm
Durable plastic with a single latch
$8.95  Inc Tax
AKA Racing Tire Gluing Applicator Tubing (AKA 38002)
This is a 12" length of replacement Applicator Tubing from AKA Racing intended for use with AKA Premium Glue Bottles. 
Intended for use with AKA Premium Glue Bottles
Out of Stock
$7.95  Inc Tax
HobbyPro 4mm Banana Plug Connector Set (Female)(10) (HBP H460)
This is a Packet of (10) 4mm Female Banana plug connector tubes from HobbyPro.

Use on motor wires for easy motor removal
Out of Stock
$7.95  Inc Tax
Yeah Racing Multi Purpose Mini Box (YR YA-0194)
Are you always stress about missing the important screws/parts when tuning up your RC cars/helicopters?  Why don't you get this Multi-Purpose Mini Box from Yeah Racing.

It definitely helps to tidy up the screws/parts storage.
It includes 2 movable plastic plates for multiple partition therefore you can store the screws/parts in a more convenient way.
It is also small in size so you can tune the RC while in race track or even on your desktop without losing your screws/parts.


Specifications:
    1. Material: Plastic
    2. Color: Black
    3. Length: Approx. 86mm
    4. Width: Approx. 55mm
    5. Height: Approx. 20mm


Keep your small parts organised
Out of Stock
$7.50  Inc Tax
AKA Racing Wheel Balancing Clay (AKA 44001C)
This is a replacement stick of Wheel Balancing Clay from AKA Racing.

This generous stick of clay measures 125mm long and 25mm wide and high.

Used in conjunction with the AKA Wheel Balancer, a little piece of this malleable clay can be positioned on the high spots within your R/C wheel to provide the perfect rotating balance.

This clay can also be used with nearly any wheel balancer, for nearly an R/C wheel; off-road or on-road.
Can be used with nearly any wheel balancer
$7.25  Inc Tax
AKA Racing Tire Gluing Bands (AKA 44002)
This is packet of (8) Off-Road Tire Gluing Bands from AKA Racing.

These bands are suitable for mounting up all 1/10 scale and 1/8 scale off-road tires.
Suitable for mounting up all 1/10 scale and 1/8 scale
Out of Stock
$6.95  Inc Tax
Yeah Racing Carbon Body Wing Protector (2) (YR YA-0278G)
This is a packet of (2) carbon fibre plates designed to protect the body of 1/10 touring car where the rear wing mounts

Features:
    1. For: On Road Cars
    2. Color: carbon fibre
Strengthen your 1/10 On-Road Body
$5.00  Inc Tax
$10.00
Yeah Racing Chassis Tweak Adjustment Washer (10) (Black) (YR WR-0009BK)
This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.

Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.

Features:
    1. Compatible to all graphite plate chassis design
    2. Material: Aluminum & Rubber
    3. Color: Black
Packet includes:
    1. 10x O-Ring Washer
    2. 10x O-Ring


Avoid Chassis Tweak on 1/10 On-road cars
$4.00  Inc Tax
$7.50
Yeah Racing Chassis Tweak Adjustment Washer (10) (Light Blue) (YR WR-0009BU)
This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.

Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.

Features:
    1. Compatible to all graphite plate chassis design
    2. Material: Aluminium & Rubber
    3. Color: Blue
Packet includes:
    1. 10x O-Ring Washer
    2. 10x O-Ring


Avoid Chassis Tweak on 1/10 On-road cars
$4.00  Inc Tax
$7.50
Spec-R Wing Screw Holder Set (SPR032-WH)
This is a packet of wing holders from Spec-R for 1/10 touring cars
$4.00  Inc Tax
$5.25
Per Page      1 - 55 of 55
  • 1