1/8 Mod1 Pinions
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
This is a 13 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 13 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 14 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 14 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 15 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 15 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 16 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 16 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 17 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 17 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 18 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 18 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 19 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 19 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 12 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 12 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 11 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 11 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
This is a 20 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 20 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 21 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 21 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
This is a 22 tooth Mod1 pitch pinion from AVID Racing Concepts which is made out of hardened steel to reduce wear.
It is the common 5mm bore and includes one set screw.
They have laser etched all the details onto the pinion for easy notification.
Details
- Mod1 Pitch | 22 Tooth | 5mm Bore
- Hardened Steel for less wear
- Material removed on gear side to reduce rotating mass
- Full range available | 11 - 22 tooth
- Laser-etched for your convenience
- 1