Tamiya
Revamped front suspension arms: The redesigned carbon fiber upper arm piece is married with carbon fiber lower arms to bring the chassis excellent durability and enhance the unit's controllability. Both the front suspension mount and aluminum servo stay have also been redesigned for the TRF101W chassis.
Greater Flexibility: The thickness of the carbon fiber lower deck has been reduced to 2.5mm to provide greater chassis flexibility, which will provide enhanced stability on low-grip surfaces. Battery posts have been moved forward, transferring pitch loads closer to the front of the unit and boosting front traction.
Smoother, faster dampening: The newly-designed middle brace moves the pitch damper attachment position 2.5mm to the rear, leading to faster response and keeping the car close to the track surface. The roll damper employs a new piston with equal contraction and extension lengths for smoother performance.
Requires:2-channel radio, steering servo, ESC, motor, battery with compatible charger, F-1 body set, and foam racing tires with wheels.
About the Toyota Hilux Pick-Up
The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day.
Features:
- Equipped with metal front under guard. Knuckle mechanism is just like that on an actual truck.
- Highly-durable front & rear die-cast metal wheel hubs.
- A planetary gear ensures optimum ratios while a metal dog clutch, shift forks, and plastic gears combine to deliver smooth gear changes.
- Durable, lightweight die-cast aluminium front/rear axle housings are equipped with differentials.
- Power is delivered from the transmission to the front wheels via universal drive shaft.
- An abundance of metal parts is incorporated for a high level of realism.
Specifications:
Length: | 525mm |
Width: | 278mm |
Height: | 275mm |
Weight: | 3.2kg |
Wheelbase: | 287mm |
Tread: | 200mm (Front), 218mm (Rear) |
Tire Width/Diameter (F/R): | 60/123mm |
Transmission type: | Longitudinally-Mounted Motor Shaft-Driven 4WD |
Differential type: | Front & Rear 6-Pinion Differential Gears |
Damper: | Front & Rear Oil Dampers |
Gear Ratio: | 1st Gear=1:54.63 (4WD) 2nd Gear=1:40.49 (2WD) 3rd Gear=1:27.92 (2WD) |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 4-Channel radio system
- Servo
- Electronic Speed Controller
- 540 Motor
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
This is a re-release of the iconic Egress 4WD off-road racing buggy.
The Egress first appeared in 1989. It was a follow up kit to the Avante kit, which had a huge fan following. The original Egress featured stacks of special racing parts. The Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with available battery and motor technologies available in the hobby market today.
Shaft Drive 4WD!
This shaft-driven 4WD chassis features a longitudinally positioned motor and full ball bearings, while carbon fiber upper and lower decks ensure that the model has superb strength. Re-designed front and rear ball differentials offer excellent reliability and easy maintenance, working in tandem with the built-in center one-way to provide sure-footed movement. The one-way bearing is lockable as a set up option. Universal drive shafts feature the same design as those used in the current TRF series parts, to maximize power transmission and improve resistance to wear and tear. 4-wheel double wishbone suspension, supported by four oil dampers equipped with aluminum cylinders, while the front and rear of the model is equipped with stabilizers for enhanced corning performance. Aluminum front uprights offer excellent reliability, and ball bearings in steering linkage arms combine with 2mm thick carbon fiber plate to offer a linear steering response.
Key Features:
- Carbon Fibre Double Deck Frame
- Re-Release of the Iconic 4WD Performance Kit!
- Shaft-Driven 4WD
- Newly-designed ball diffs are employed front and rear, and combine with a center one-way for sure-footed traction.
- The 4-wheel double wishbone suspension is fitted with high-capacity oil dampers for excellent performance off-road.
- The Egress enjoys a wheelbase 15mm longer than that of the Avante, and features carbon fiber upper/lower decks for stability.
- Polycarbonate Body and Under tray
- Front & Rear Ball Differentials + Center One-Way
- 3-Piece Steering Tie Rod
- 4-Wheel Double Wishbone Suspension
What's In The Box?
- (1) 1/10 Egress Off-Road Buggy 4WD Kit
- Polycarbonate Body
- Decal Sheet
- Instructions Manual
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Motor
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
About the Avante:
The machine features a unique shaft-driven 4WD system which was taken from Tamiya’s first 4WD R/C buggy, the Hotshot. It features a highly sophisticated design including an FRP double-deck chassis layout, longitudinal motor & battery positions, and a formula-type body with chassis fairing. It is equipped with innovative components such as a compact gearbox with 3 small planetary gears, a center diff to increase stability, a fully adjustable suspension, and cam-lock wheel caps.
The modern specification of the car has a few updates, such as universal drive-shafts and machined aluminum uprights, which gives this version increased durability and performance over the original.
Features:
- 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm.
- Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength.
- Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion.
- Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction.
- 4-wheel double wishbone suspension has metal shafts for great customizability.
- Aluminum front uprights.
- Spike tires are mounted on fluorescent pink wheels.
- Comes with a 25-Turn motor featuring a special label.
- Requires: 2-Channel Radio, servo, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint.
Chassis: 0.08" (2mm) thick carbon fiber, double deck configuration
Drive: Four wheel shaft with pin-secured wheel axles
Body:Polycarbonate with wing and chassis fairing, trimmed and painted with black and gray color scheme inspired by the Tamiya Avante Black Special Mini 4WD
Motor: 25 turn brushed, 540 size
Shocks: Oil-filled with gold colored cylinders and top caps
Shock Stays: 0.14" (3.5mm) thick carbon fiber
Suspension: Front and rear multi-link double wishbone, adjustable metal arms with radius arm protectors and rear anti-roll bar
Differentials: Front and rear planetary, center ball diff
Tires: High-grip pin spike with foam inserts
Front Wheels: 1" (25.4mm) wide, 2.2" (57mm) diameter
Rear Wheels: 1.4" (35.5mm) wide, 2.2" (57mm) diameter
Wheel Colour:fluorescent pink
Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Racing steering set with a 2mm thick carbon fiber plate and 5x8mm ball bearings
What's included in the box?
1 x Tamiya Limited Edition Black Special Avante 2011 Off-Road Buggy Kit
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
Specifications:
Length: 16.5" (420mm)
Width: 9.4" (240mm)
Height: 4.5" (140mm)
Wheelbase: 10.2" (260mm)
Tread: 7.9" (200mm) distance from wheel centers, left to right
Gear Ratio: 1:8.33
Minimum Ground Clearance: 1.6" (40mm)
Weight: 2.9lbs (1300g)
Length: 13" (330mm)
Width: 5.9" (150mm)
Height: 2.4" (61mm)
• 1/10 scale R/C model assembly kit. Length: 430mm, width: 243mm, height: 157mm. Wheelbase: 275mm.
• The lightweight, durable 0.7mm thick polycarbonate body depicts the form of the Egress - a successor to the famed Avante - with 1.0mm thick polycarbonate wing and under guard.
• Polycarbonate body, wing, etc. require painting with separately sold Tamiya Color paints for polycarbonate.
• This kit also features dark titanium color anodized front/rear damper cylinders and front uprights, plus new color stickers and silver color wheels.
• Required to complete: 2-channel radio, steering servo, ESC, motor, 7.2-7.4volt battery with charger, and Tamiya PS paint.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Motor
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
One of the most popular pick-up trucks of all time, the Toyota Hilux.
Tamiya spared no expense in developing this truck to be the most realistic ever, with a ladder frame chassis and 4WD system just like the actual truck. The 3-speed transmission provides lots of enjoyable driving options and a plethora of metal parts such as the front guard, leaf springs, and aluminum friction dampers make for a very interesting assembly kit.
The large diameter tires provide impressive ground clearance and enhances the realistic resin body's muscular look. Metal-plated parts for the roll bar, front grill, front/rear bumpers, and muffler provide extra detail highlights throughout the model as well.
To top off this unique model, parts for a surfboard are also included.
features:
- Front Styling: Headlights and turn signals can be recreated using separately available LEDs. Maker emblems are recreated with metal-transfer markings.
- Roll Bar Lights: Metal-plated roll bar features 5 light positions, into which LEDs can be installed.
- Front Guard with Fog Lights: Front guard features fog lights, which can be modeled with either light covers on or off.
- Realistic Metal-Plated Wheels: Newly-designed 3-piece 5-spoke wheels feature a stylish gun metal color.
- Rear Styling: Highly accurate injection-molded resin body features lots of metal-plated parts such as the muffler. LEDs can also be installed for realistic taillights.
- 3 Types of Surfboard Markings: Choose from 3 different kinds of markings to create your own custom surfboard
- Metal Leaf Springs: Realistic leaf springs are made from 5 individual panels and can be easily adjusted after assembly.
- Differential: Differential features tough metal diff gears and can be locked to provide awesome off-road ability.
- 3-Speed Transmission: 3-speed transmission provides excellent low speed performance and realistic gear changes. A slipper clutch protects the gears from shocks to ensure smooth operation.
- Length: 508mm
- Width: 216mm
- Height: 270mm
- Weight: Approx. 3.1kg
- Motor: Type RS540
- Drivetrain: Shaft-driven 4WD
- Diff. Gear: Front/Rear 2-bevel Diff
- Suspension: Front/Rear Leaf Rigid
- Dampers: Front/Rear Friction Dampers
- Gear Ratios: 1:64.39 (Low), 1:35.20 (2nd), 1:21.14 (Top)
Kit includes:
Tamiya Hilux truck with friction shocks, 540 motor, surfboard,
molded White body, window section, body trim, decals, plastic light
lenses, tires, wheels, 16 tooth pinion gear, 54 tooth spur gear
instructions
Needed To Complete:
- 4 Channel Radio and Receiver
- Standard Size Servo for steering and Gear Changing Servo
- ESC which is 540 brushed motor compatible
- 7.2V NiMH Battery with standard Tamiya connector
- Charger for Battery
- Paint and Building equipment
Features:
- Plated wheels are a hex hub design, and are paired with front ribbed and rear square spike tires.
- Front double-wishbone suspension uses A arms with 25 degrees of caster, and cushioned by oil dampers.
- The motor is positioned at the rear of the BB-01 chassis. Rear trailing arm suspension alignment is adjustable.
- The battery pack is located along the chassis centerline. Remove the nose cowl and stopper pin to access it.
- A busy and realistic cockpit area features a driver figure, light pods and safety nets.
- Remove the rear roll cage screws and it swings up to give access to the motor.
- The BB-01 chassis offers great suspension stroke and tread, making it the perfect off road partner.
- A flat underbelly helps minimize problems with rough off road surfaces.
- Why not buy a separately sold spare tire and fit it on the rear when you're not driving the BBX?
Required to complete:
- 2-channel radio
- steering servo
- ESC
- 7.2-7.4volt battery
- charger
It’s now available again in the form of a re-issue assembly kit renamed the VQS. The kit receives tweaks to the original to bring it into the modern age of R/C fun! We have also saved builders some work too, with a pre-cut and pre-painted body!
This R/C model assembly kit is an updated re-release version of a 1988 buggy which inherited its make-up from the legendary race-oriented Avante. The forward cockpit body design - and the rear wing - are molded in lightweight polycarbonate and pre-painted black, pre-cut with body mount holes pre-made to save on some preparation work.
An ABS plastic monocoque frame is employed, with responsive shaft-driven 4WD plus a triple differential setup, four-wheel double wishbone suspension and plenty more - superb off-road driving awaits!
Capable Off-Road Chassis
This model's durable ABS plastic monocoque frame protects vital R/C equipment and boosts suspension performance with its excellent rigidity. A total of three differentials are employed: small front and rear planetary gear differentials, and a center differential with ball thrust bearing; front and rear gearboxes also have maintenance hatches.
Universal shafts front and rear ensure smooth, efficient drive and minimal worry about parts coming loose due to bumps and shocks, while the Avante-based 4-wheel double wishbone suspension employs plastic lower arms with threaded shaft upper arms that allow swift adjustment of camber. Front uprights are aluminum, and stabilizers are included for the front and rear.
• 1/10 scale R/C model assembly kit.
• Lightweight and durable polycarbonate, pre-painted and cut, with body mount holes already pre-drilled.
• Body stickers are based upon those in the original release, and just require application to complete the body.
• The monocoque bathtub frame is a lightweight, durable design that protects and allows easy access to R/C equipment.
• Battery changes are made from the underside. The model is compatible with Tamiya 7.2V Racing Pack and LF2200-6.6V battery packs.
• The front double wishbone suspension employs aluminium front uprights and efficient universal shafts inherited from the 2011 re-issue of the Avante (Item 58489).
• Sealed gearboxes front and rear house compact planetary gear differential units from the original Avante.
• Responsive shaft-driven 4WD is powered by an included longitudinally-placed 540-Size brushed motor, with a ball differential in the drive gear.
• The rear suspension setup features long, ball-mounted lower arms. Threaded upper arms (front and rear) allow adjustment of camber.
• Lightweight 6-spoke wheels are paired with pin spike tires. Front wheels are narrow, and rear wheels are wide designs.
Specifications:
Length: | 435mm |
Width: | 235mm |
Height: | 150mm |
Wheelbase: | 275mm |
Transmission type: | Shaft-Driven 4WD - Front & Rear Planetary Differential Gears, Center Ball Differential |
Suspension: | 4-Wheel Independent Double-Wishbone Suspension |
Tread: | Tread: 200mm (Front); 200mm (Rear) |
Tire Width/Diameter: | 31/88mm (Front), 38/88mm (Rear) |
Electronic Speed Controller: | Sold separately. |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 8.73:1 (using kit-standard 21T pinion gear) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
Features:
Chassis: Bathtub type monocoque
Drive: Four wheel
Motors: Two 540 brushed
ESC: TEU-160BK
Gearboxes: Sealed, equipped with bevel gear differentials
Shocks: Eight plastic body friction (not oil-filled)
Body: Plastic, molded in white with metal plated plastic parts for grille, air intake and bumper
Tires: 6.5" (165mm) diameter, 4.3" (110mm) wide, split vee type tread
Wheels: Chrome plated plastic 2.7" (69mm) diameter, 3.7" (94mm)wide
Steering: Four wheel
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis.
Camber: Non-adjustable
Package Includes:
Super Clod Buster Pickup Truck Kit, two Motors, ESC, Body, Tires, Wheels, Decals and Instructions
Needed to Complete:
- 2 Channel Radio and Receiver
- Standard Size High Torque Servo for steering
- 7.2V NiMH Battery with standard Tamiya connector
- Charger for Battery
- Paint and Building equipment
Specifications:
Vehicle-
Length: 18.9" (480mm)
Width: 14.9" (380mm)
Height: 13.4" (340mm)
Weight: 8.73lbs (3960g)
Body-
Length: 17" (432mm)
Width: 6.8" (173mm)
Height: 4.8" (121mm)
This R/C kit features the Toyota Land Cruiser 40 mounted on top of the GF-01 with a twist. It includes track units, so you can transvers dirt, snow, gravel, and other terrain in a whole new way! Welcome the GF-01FT)
GF-01FT Chassis
The GF-01FT is a variant of the GF-01. In place of the original tires are four swinging track units, which are attached with the uprights and are powered via drive sprockets. Each features eight rollers, and the third roller's vertical motion ensures that the GF-01FT enjoys excellent traction. Ground clearance is also significant. The tracks themselves are assembly type, with metal link pins and two types of link (standard, grouser) for running in different conditions.
Features:
- 1/12 scale R/C model assembly kit. Length: 337mm, width: 250mm, height: 236mm. Wheelbase: 174mm.
- This model recreates the Land Cruiser 40 Pick-Up equipped with 3-sided track units in place of tires.
- These track units offer superlative traction compared to tires but also enable the model to run even on snow, sand, mud and other testing conditions with stable traction.
- The model is based upon the gear-driven 4WD GF-01FT chassis featuring a monocoque frame with power provided by the centrally-positioned motor via front/rear differential gears.
- "Square" layout with similar wheelbase and tread measurements provides unique performance.
- Choose between two types of track links; standard flat designs, and toothed grouser designs.
- A lightweight, polycarbonate body, and driver figure included.
- Type 540 motor included.
- Requires: ESC, 2-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
About the M-08 standard edition:
This assembly kit creates the M-08 Concept high performance R/C chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections that allow 3 different wheelbase selections. Smooth 4-wheel double wishbone suspension utilizes CVA oil dampers and long suspension arms for ground hugging performance, and front caster with a pairing of 0-degree suspension mount and 2-degree hub carrier. An oil-filled gear differential provides smooth drive, while motor and gearbox are positioned to ensure powerful drive under acceleration.
Option Parts Included in the M-08R kit:
42143: 4mm Aluminum Serrated Wheel Nut (4pcs. -Blue)
42357: Cross Joints for Low Friction Assembly Universal Shafts
51000: Hi-Torque Servo Saver (Black)
53509: Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T/F201)
53642: 5mm Aluminum Ball Connector (Blue)
53823: Clamp Type Aluminum Wheel Hub (5mm Thick)
53851: 46mm Titanium Coated Suspension Shafts 2pcs.
53917: 2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension
53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.)
54183: M-Chassis Reinforced Freewheel Axle Set
54868: Open Face 5mm Reinforced Adjusters (Medium/8pcs.)
54869: Open Face 5mm Reinforced Adjusters (Long/8pcs.)
54906: M-08 Concept Aluminum Shaft Set
54969: 33mm Lightweight Aluminum Swing Shafts (2pcs.)
Features:
- 1/10 scale R/C model assembly kit.
- The TA06 Rear Ball Differential Set (Item 54306) utilizes twelve 3/32-inch balls to give superb stability.
- Includes carbon fiber components such as battery holders and body mount base (Item 54908).
- M-08 Concept Reinforced K Parts (Gearbox) (Item 54983) give sturdier gearbox and steering setups, for more efficient drive and improved steering feel.
- Comes with the dedicated chassis weight (20g).
- Features hex head screws.
- M-07 Concept Reinforced D Parts (Suspension Arms) (Item 54811) featuring carbon fiber-reinforced resin allow superior cornering ability.
- Durable, lightweight aluminum turnbuckle shafts (3x18mm; Item54247, 3x23mm; Item 54248, and 3x32mm; Item 54249) allow adjustment of length without removing adjusters.
- Includes a blue anodized finish version of the TRF Super Short Big Bore Dampers+ (4pcs.) (Item 42355).
- The 1.3mm diameter damper pistons (x3) give smooth oil flow and facilitate more flexible suspension.
- Requires: 2-channel radio, steering servo, ESC, 540-motor, 7.2-7.4volt battery pack with compatible charger, M-chassis 60D tires, and M-chassis body set.
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- 540 Motor
- Battery
- Charger
- M-Chassis Body
- M-chassis tires
- Paint
- AA Batteries for Transmitter
The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, “Being Nuts is Neat!” And, the front of the all-new TD-4 chassis, shares a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body.
The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.
TD4 - Low Profile, High Performance
The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment.
Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.
Features:
- 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.
- Polycarbonate body (inspired by the Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of Znug Design.
- Newly designed shaft-driven 4WD chassis based on a one-piece monocoque frame. It features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
- The TD4 chassis also employs a front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
- The four-wheel double wishbone suspension system uses CVA oil dampers for fun performance.
- Features full ball bearings.
- Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
- Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
- Star dish wheels are paired with square spike tires which offer good grip off-road.
- Choose between high and low type wing stays to adjust the downforce depending on the road surface.
- Comes with a driver figure for extra realism, and high-torque servo saver.
- Requires: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.
Specifications:
Length: | 338mm |
Width: | 246mm |
Height: | 124mm |
Differential type: | 3-Bevel Differential Gears |
Suspension type: | 4-wheel independent double wishbone suspension |
Damper: | Front & Rear Oil Dampers |
Motor: | Type 540 motor |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- 540 type motor
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
For a limited time only, you can get your hands on this Peace and Love decorated version body that turns it into a veritable Hippy wagon!
The R/C assembly kit is based upon the proven 2WD M-05 chassis. The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity.
Features:
• PRE-PAINTED polycarbonate body in TAMIYA PS-3 Light blue, with separate molded plastic parts included to create bumper, light cases and side mirrors.
• Brand new sticker sheet with hippy-inspired designs included to decorate the body.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• The M-05 has a wide range of Hop-Up Option parts available separately to tune it.
Specifications:
Length: | 426mm |
Width: | 195mm |
Height: | 177mm |
Wheelbase: | 239mm |
Chassis: | M-05 lightweight monocoque |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
This R/C model assembly kit recreates the G 500. Length: 455mm, width: 196mm, height: 207mm. The boxy form is recreated accurately in polycarbonate, with separate molded parts for front grille, side mirrors and spare tire cover. The CC-02 provides a great base for the model, at home on a range of off-road surfaces and even rocky terrain.
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with matte plated seven-spoke wheels and grippy block pattern tires.
Features:
- The distinctive boxy lines of the Mercedes-Benz G 500 are recreated in style, molded in lightweight and durable polycarbonate.
- Metal-plated components are used in the depiction of the front grille and light cases, endowing the model with a further touch of realism.
- Separately molded side mirror parts accurately recreate their full size counterparts and are finished using paint and stickers.
- Take a close-up look at the silver color matte plated seven-spoke wheels, which are paired with block pattern tires for super grip.
- The roof section of the body has a depiction of the sunroof, and masking stickers are included to cover it and other windows when painting.
- Separately molded in tough polycarbonate-ABS plastic, the spare tire cover features a plated emblem for a highly authentic finish.
- The ladder frame is modeled upon those employed by full-size cars, and offers excellent rigidity on this 1/10 scale vehicle.
- Front and rear axle housings are connected to four links arms each, which combine with oil dampers for superlative cushioning.
- Changing gear layout and using separately-sold pinions of nine other sizes allows a range of twenty gear ratios between 11.09 and 29.28:1.
- Metal chassis frame sections facilitate exemplary durability, while CVA oil damper ensure that you get the maximum off-road performance.
- Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.
Specifications:
Length: | 455mm |
Width: | 196mm |
Height: | 207mm |
Wheelbase: | 267mm |
Tread: | 160mm (Front), 163mm (Rear) |
Tire Width/Diameter (F/R): | 33/90mm |
Transmission type: | Longitudinally-Mounted Motor Shaft-Driven 4WD |
Differential type: | 3-Bevel Differential Gears |
Suspension type: | 4-Link Rigid Suspension (Front & Rear) |
Damper: | Front & Rear Oil Dampers |
Gear Ratio: | 17.33:1 (using kit-standard 16T pinion) |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies.
Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
Specifications:
Length: | 430mm |
Width: | 188mm |
Height: | 99mm |
Wheelbase: | 257mm |
Tire Width/Diameter (Front and Rear): | 24/64mm |
Chassis: | Composite Monocoque-Frame Chassis |
Transmission type: | Shaft-Driven Full-Time 4WD |
Differential type: | Front & Rear Oil-Filled Gear Differentials |
Suspension: | Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension |
Gear Ratio: | 6.56:1 (with kit 24T pinion) |
Motor: | Type 540 motor (included) |
Electronic speed Controller: | Sold Separately |
Required Items (Sold Separately)
- 2 Channel Transmitter/Receiver
- Electronic Speed Control
- Servo
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies.
Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work.
Features:
- 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.
- 1997 Mercedes-Benz CLK-GTR is recreated in lightweight and durable polycarbonate.
- Separately molded white ABS plastic parts recreate side mirrors and rear wing.
- Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)
- TC-01 chassis
- The durable and composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.
- 4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.
- Use spacers and shims to easily alter camber, skid, and toe angle settings.
- Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
- Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs.
Specifications:
Length: | 470mm |
Width: | 194mm |
Wheelbase: | 257mm |
Tire Width/Diameter (Front and Rear): | 24/64mm |
Chassis: | Composite Monocoque-Frame Chassis |
Transmission type: | Shaft-Driven Full-Time 4WD |
Differential type: | Front & Rear Oil-Filled Gear Differentials |
Suspension: | Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension |
Gear Ratio: | 6.56:1 (with kit 24T pinion) |
Motor: | Type 540 motor (included) |
Electronic speed Controller: | Sold Separately |
Required Items (Sold Separately)
- 2 Channel Transmitter/Receiver
- Electronic Speed Control
- Low Profile Servo (Note: Standard Size Servos cannot be used),
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
Features:
- 1/10 scale R/C model assembly kit. Length: 425, width: 247mm.
- The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) and with Smoke (PS-31) painted windows. Separate plated parts recreate grille cover, fog lamps and roll bar.
- The TT-02FT is a variant of the TT-02 chassis, with four tracks on its suspension.
- Each of the three-sided track units is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from link parts, and offer efficient traction.
- Two types of elastomer track link (standard and grouser) are included for setup options.
- Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance.
- Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered during off-road driving.
- TT-02 four-bevel differentials and identical suspension arms are used.
- Includes 540-brushed type motor.
- Requires: ESC, 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
The Hotshot II first came to the consciousness of hobbyist’s minds and work benches in 1987! It is back for the very first time since then, except this time we have a twist! Following the hugely popular release of the Wild One Off-Roader, Blockhead Motors edition kit, Tamiya has once again invited Japanese designer, Jun Watanabe to produce his take on the iconic Hotshot II.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
Specifications:
• 1/10 scale R/C assembly kit. Length: 390mm, width: 235mm, height: 150mm.
• Polycarbonate body (0.7mm thickness) of the Hotshot II is pre-cut and pre-painted in brilliant blue. (Cutlines and marks to make holes added from the original Hotshot II (Item 58062) body.)
• New roll cage positioned higher to ensure raised driver position for more realism. Following this matter, upper frame also updated.
• Uprights and wheels are matte-finish metal-plated.
• Includes new stickers designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS.”
• Number plates, light pods, side plates, window nets and dummy antenna included.
• 4-wheel double wishbone suspension uses one front transverse and two rear CVA II oil dampers.
• Includes 540-type brushed motor
This R/C model assembly kit is a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987. The sleek, smart body and rear wing are polycarbonate and pre-painted black, as well as being pre-cut. Stickers are included to apply racy orange and yellow markings.
Durable 4WD Buggy Chassis
The Hotshot II has a shaft-driven 4WD chassis with sealed gearboxes front and rear to keep out dirt and sand; each has a differential inside for smooth cornering, while the underside of the model is protected by the underguard. Its 4-wheel independent double wishbone suspension employs three CVA oil dampers - one at the front and two at the rear, with a front stabilizer helping to get the most out of the 4-wheel drive. White dish design wheels are paired with semi-pneumatic oval block tires for exemplary grip on tough off-road surfaces.
Features include:
- The Hotshot II wedge body design is a classic!
- Red front upright parts really catch the eye.
- The front monoshock suspension uses a single CVA oil damper, which artfully keeps chassis roll in check.
- The metal roof has an integrated air intake, while a driver figure is included to use in the cockpit.
- The rear uses H-shaped arms top and bottom. Dog bone drive shafts are a reliable design.
- Each rear wheel has a CVA oil damper, which help the Hotshot II pick its way across challenging off-road surfaces.
- Dish wheels are of a different width front and rear, each with its own size of oval block tire.
- Like the body, the rear wing is pre-painted black polycarbonate, pre-cut for your convenience!
Specifications:
- Length: 390mm
- Width: 235mm
- Height: 160mm
- Wheelbase: 265mm
- Tire width/diameter: 31/88mm (front); 38/88mm (rear)
- Tread: 205mm (front); 200mm (rear)
- ABS monocoque frame
- Shaft-driven 4WD
- 3-bevel differential gears
- 2-piece steering tie-rod
- 4-wheel independent double wishbone suspension
- CVA oil dampers
- Selectable gear ratio = 10.04:1, 8.70:1, 8.16:1, 7.68:1
- Type 540 motor
- Electronic speed controller (ESC) is sold separately.
What's In The Box?
- 1/10 Hotshot II Off-Road Buggy 4WD Kit
- Painted Polycarbonate Body
- Decal Sheet
- Instructions Manual
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
Volvo's impressive and varied vehicle line-up is home to a highly successful range of working vehicles that includes haulers for heavyweight work in mines, quarries and the like, among them the A60H that was announced at the bauma 2016 show in Munich. This R/C model assembly kit depicts the A60H with a polycarbonate cab section capturing the hauler's distinctive lines, and a sturdy bed molded in ABS plastic. Stickers are included to recreate details such as front grille, air inlets flanking the hood, headlights, logos and more.
Fun, Innovative & Great Performance!
The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers, and yellow deep rim wheels are paired with chunky 113mm tires. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.
Features:
- The rear bed is molded in the same yellow as the chassis, perfect for this depiction of a construction vehicle!
- The lightweight polycarbonate cabin section comes pre-painted in Camel yellow and Gun metal, and cut out, too.
- A dedicated bumper meshes nicely with the polycarbonate cabin, helping to protect from any major bumps.
- The G6-01 chassis is based around a slimline monocoque, with a two-piece steering tie-rod for excellent response.
- 6-wheel double wishbone suspension ensures superior off-road performance in conjunction with 6-wheel drive.
- The battery pack is inserted longitudinally, and held securely in place by the model's rear bed.
Specifications:
Length: | 486mm |
Width: | 270mm |
Height: | 210mm |
Wheelbase: | 173mm + 126mm |
Transmission type: | Gear-Driven 6WD |
Suspension: | 6-Wheel Independent Double Wishbone Suspension |
Tread: | 200mm (Front, Center and Rear) |
Tire Width/Diameter: | 68mm/113mm |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 18.03:1 |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
This 2WD R/C off-road assembly kit buggy inherits its name from the 1980s Tamiya R/C rear-wheel drive model "Astute." The low-profile, sleek body is designed by Kota Nezu of znug design.
The model features a driver figure in the cockpit and individual front/rear small fenders. Two types (high/low) of wing stays are included to adjust downforce.
Based on a monocoque frame chassis with midship motor and battery pack position toward the rear, the Astute 2022 utilizes front ribbed and rear square spike tires.
TD2 - Superbly Balanced RWD
The TD2 is a rear-wheel drive buggy chassis which employs front inboard suspension for slim, low-profile form, and a monocoque frame with optimum R/C equipment layout. It features a midship transverse motor and transverse battery pack positioned to the rear.
The sealed gearbox has a built-in ball differential to limit slip and 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shafts for use as upper arms facilitate camber angle adjustment.
Front suspension has a skid angle of 25 degrees and angled dampers for smooth performance. Ribbed front and rear square spike tires facilitate stability and great grip. Front wheels are attached by hex hubs.
Features:
- The TD2 layout has the motor installed midships, while the battery pack in a position toward the rear to aid with traction.
- A hi-torque servo saver comes included as standard, and helps actuate the steering via a three-piece tie-rod setup.
- Smooth front inboard suspension has suspension arms with a 25-degree skid angle and CVA oil dampers at a similar gradient.
- Upper "I" and lower "H" arms are employed in the front suspension. Turnbuckle shaft upper arms allow swift adjustment of camber.
- The rear suspension setup features a combination of lower "H" arms and upper turnbuckle shafts.
- The motor is attached in a transverse position to the rear of the battery pack, providing power to a drivetrain with 3 gears.
- A ball differential is housed in the sealed gearbox. Steel joint cups secure the durability needed for a demanding off-road drive.
- CVA oil dampers have red springs in keeping with the livery theme of the stylish Astute 2022.
- Black star dish design wheels are paired with sturdy hex hub nuts and front ribbed tires for superior directionality.
- At the rear, black star dish wheels are used in combination with square spike tires to give the model plenty of bite.
- Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders.
- The cockpit is a particular highlight, with an aircraft-inspired canopy and a driver figure installed inside for superb realism.
- Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. This image shows low types.
- Front polycarbonate mini-fenders are screw-attached to their upright. Blue sections are taken care of with stickers.
- If you like, side pontoon front sections can be left unpainted to provide a window into the car's inner workings!
Specifications:
Overall length: | 387mm |
Width: | 246mm |
Height: | 125mm |
Transmission type: | rear 2WD |
Suspension: | 4-wheel double wishbone |
Tire width/diameter: | Front 27/79mm. Rear 41/82mm |
Required Items (Sold Separately)
- Transmitter/Receiver
- 540 Type Motor
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
Features:
- 1/10 scale R/C model assembly kit. Updated version of the Super Sabre, a beginner-friendly buggy originally released in 1987. Length: 390mm, width: 234mm, height: 135mm.
- The 0.7mm thick polycarbonate is fitted with the separate wing part and is pre- cut and pre-painted in silver.
- Shaft-driven 4WD.
- 4-wheel independent double wishbone suspension employs CVA short dampers II with a front stabilizer to help get the most out of the 4-wheel drive system.
- ABS bathtub frame and other reinforced parts give superb durability and simplified maintenance.
- Gearboxes are sealed to keep out dirt and contain differentials for smooth cornering.
- The body requires the application of stickers, cutting and painting of figure and other work.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Features:
- Classic stickers have a brand-new color scheme.
- ABS space frame is molded in a dark gray.
- Superlative cushioning and grip are provided by 130mm diameter, 58mm width lug pattern pin-spike tires on gold color plated wheels, cushioned by high-performance CVA oil dampers on front double wishbone and rear trailing arm suspension setups.
- Efficient and durable universal shafts come with rubber boots.
- Includes 540-type motor.
- Requires: ESC, 2-Channel Radio, servo, 7.2-7.4volt battery pack & compatible charger.
Specifications:
Length: | 410mm |
Width: | 285mm |
Height: | 240mm |
Wheelbase: | 247mm |
Transmission type: | Rear-Wheel Drive |
Suspension: | Double Wishbone (Front); Trailing Arm (Rear) |
Tread: | Tread: 200mm (Front); 225mm (Rear) |
Tire Width/Diameter: | 58mm/130mm |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 14.7:1 |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
The Bi-drive Recreational All-terrain Transporter was created by Subaru in the late 1970's from their earlier 4WD station wagon model for the US market. Powered by a flat-four engine ranging from 1.6 to 1.8 liters in displacement, this pickup had the unique feature of having jump seats welded to the truck bed, which allowed it to be imported as a car instead of a truck. One of the car's more famous owners was former US President Ronald Reagan, whose red BRAT is restored and displayed at his former residence in California.
Model is a High-quality 1/10 R/C assembly kit of the Subaru BRAT, one of Tamiyas early R/C creations
- Same 2WD chassis as used for ITEM# 58354 The Frog, with 4-wheel independent suspension and full ball bearings to handle tough off-road driving.
- Comes with two body shells, one made of plastic material similar to the original BRAT for a nostalgic feel and one made from durable polycarbonate material (included).
- Type 540 motor included.
- Electronic Speed Control Unit (TBLE-02S) also included.
Features:
- Improved re-release model of the subaru brat, which made its debut in 1983
- Lightweight and durable abs space frame
- Four wheel independent suspension
- Differential gear for smooth cornering
- Includes both realistic resin and lightweight polycarbonate bodies
- Requires a 7.2V running battery (not included)
- Requires a 2ch. radio control system
- Model may vary from image on box
- Use Tamiya color for painting resin body and Tamiya polycarbonate color for polycarbonate body (paint not included)
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
- Paint
This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic customized Beetle body depicted in tough polystyrene resin, with metal-plated parts supplied in the kit to add the finishing touch for handles and headlight frames. A resin driver figure is the icing on top of the cake!
Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable red ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups.
Superlative cushioning and grip are provided by 123mm-diameter, 60mm-width lug pattern tires on yellow wheels. Efficient and durable universal shafts come with rubber boots. A sturdy sealed gearbox protects the differential inside from dust and dirt.
Features:
- Front double wishbone and rear trailing arm setups are cushioned by high-performance CVA oil dampers.
- Space frame chassis incorporates a dust cover part to ensure that vital R/C equipment is protected.
- Universal drive shafts not only boost efficiency; they also minimize the risk of popping out when driving.
Specifications:
Length: | 410mm |
Width: | 285mm |
Height: | 240mm |
Wheelbase: | 247mm |
Transmission type: | Rear-Wheel Drive |
Suspension: | Double Wishbone (Front); Trailing Arm (Rear) |
Tread: | Tread: 200mm (Front); 225mm (Rear) |
Tire Width/Diameter: | 58mm/130mm |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 14.7:1 |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
.
Features:
- This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987.
- Polycarbonate body is pre-cut & pre-painted in white and blue, with transparent canopy. (Body requires application of stickers, assembly and painting of figure, and other work.)
- ABS bathtub chassis.
- 4-wheel independent double wishbone suspension with CVA oil dampers uses front stabilizer for a superior ride. Kit includes CVA oil dampers II instead of Type I seen in the original release.
- The front and rear sealed gearboxes contain compact, durable die-cast 3-bevel differential gears for smooth performance.
- Semi-pneumatic spike tires.
- Contains separate rear wing (pre-painted in white).
- Includes a driver figure.
- Type 540 motor and ESC included.
Specifications:
Length: | 390mm |
Width: | 240mm |
Height: | 135mm |
Differential type: | 3-Bevel Differential Gears |
Suspension type: | 4-wheel independent double wishbone suspension with CVA |
Damper: | Front & Rear Oil Dampers |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Fun, Innovative & Great Performance!
The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.
Features:
- This 6-wheel drive monster truck school bus not only looks great, it will be a superb companion in your off-road adventures!
- Roof lights are recreated by separate parts, and attached with double-sided tape. Red and yellow lenses are depicted using stickers.
- A sticker enables quick and easy recreation of the screw-attached STOP sign on the left side - an essential for any school bus.
- Stickers are also used to recreate lightly-tinted window areas with ease, saving time on the painting process.
Specifications:
Length: | 478mm |
Width: | 270mm |
Height: | 239mm |
Wheelbase: | 173mm + 126mm |
Transmission type: | Gear-Driven 6WD |
Suspension: | 6-Wheel Independent Double Wishbone Suspension |
Tread: | 200mm (Front, Center and Rear) |
Tire Width/Diameter: | 68mm/113mm |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 18.03:1 |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
This is a re-release version of the 1/12 scale R/C XR311, Tamiya's first R/C model with a suspension system, which was originally released in 1977. While maintaining the basic layout of the original, this re-release version incorporates modern improvements. The injection-molded body captures the vehicle's purposeful look. Interior parts and a driver figure are included for even greater realism.
Refined Chassis Details
The 2WD duralumin chassis frame features a rear-mounted motor rear-wheel drive layout. The battery is positioned down the center of the chassis with the receiver and ESC on either side for exceptional balance. 4-wheel double wishbone suspension features upper and lower H-arms and adjustable metal torsion bar springs. Fully-enclosed gearbox may be assembled with one of three different gear ratios.
Specifications:
- Scale: 1/12
- Length: 400mm
- Width: 168mm
- Height: 139mm
- Wheelbase: 256mm
- Weight: 1,800g
- Type 540 Motor
- Rear-Wheel Drive
- Tire Width/Diameter: (F/R) 29/77mm
- Tread (F/R): 138mm
- Duralumin Frame Chassis
- 3-Bevel Differential
- 2-piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension with Metal Torsion Bar Springs
- Gear Ratio=9.3:1, 16:1, 21:1
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
- Paint
This R/C model assembly kit creates a vehicle which offers an excellent off-road drive. Molded in detailed ABS plastic, its racy body is inspired by customized Volkswagen Beetles, and features exaggerated fenders, a simplified rear end, triple auxiliary lights and more.
Metal-plated parts recreate headlights, auxiliary lights and the rear depiction of the engine. The GF-01TR chassis provides a dynamic off-road drive.
GF-01TR: Awesome Traction
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Reduction gears on each axle slow drive shaft rotation for immense traction, great ground clearance, and the ability to take on tough off-road terrain.
The gearbox is sealed to protect from dust and debris, and integrated into the frame; built-in differential gears provide superb traction and durability with the use of included diff putty.
4-wheel double wishbone suspension utilizes friction dampers, while a 2-piece tie rod steering setup with the servo on the left gives excellent response.
Yellow wheels are fitted with 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. The chassis utilizes a 'square' setup with similar tread and wheelbase lengths.
Features:
- The Monster Beetle Trail offers immense traction that will take it over all kinds of obstacles.
- Molded in ABS plastic, the body offers plenty of detail. Metal-plated parts add another layer of realism.
- The front is adorned with triple auxiliary lamps, which are metal-plated parts with stickers for decoration.
- The dummy engine and muffler are also metal-plated parts. The body also features a sporty roll bar.
Use the included putty in the gear differentials to help increase this model with superb traction. - All wheels have hub reduction units, which slow down drive shaft output for greater torque.
Specifications:
Length: | 333mm |
Width: | 270mm |
Height: | 215mm |
Wheelbase: | 174mm |
Transmission type: | 4WD |
Suspension: | 4-Wheel Independent Double Wishbone Suspension |
Tread: | 210mm (Front & Rear) |
Tire Width/Diameter: | 68/115mm (Front & Rear) |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 37.35:1 (using kit standard 18T pinion gear) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with red wheels and grippy block pattern tires.
Features:
- Polycarbonate body with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem.
- Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs.
- Propeller shafts (short: 76mm) included.
- The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability.
- A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear.
Specifications:
Length: | 384mm |
Width: | 196mm |
Height: | 224mm |
Wheelbase: | 242mm |
Transmission type: | Longitudinally-Mounted Motor Shaft-Driven 4WD |
Differential type: | 3-Bevel Differential Gears |
Suspension type: | 4-Link Rigid Suspension (Front & Rear) |
Damper: | Front & Rear Oil Dampers |
Gear Ratio: | 17.33:1 (using kit-standard 16T pinion) |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
First introduced in 1983, the 2WD racing buggy Frog made a huge splash with its eye-catching design and high performance running. The Frog now makes a comeback, updated for a new age, but with its basic structure essentially unchanged.
Preserving its characteristic space frame, the oil dampers for trailing-arm type rear suspension have been updated to diaphragm type. Rear drive shaft features dogbone type joint for secure power transmission. Sleek polycarbonate body remains the same, while 3-piece wheels feature front grooved and rear spike tires for excellent off-road running.
2wd Chassis Packed with Innovation
Electric R/C racing buggy features ABS space frame and nylon suspension and bumper for a lightweight yet rugged form that is perfect for off road running. Battery is held in ultra-low position, giving this car the stability and weight balance to handle rough terrain and wild jumps. Advanced 4-wheel independent suspension composed of front double wishbone type featuring in-board spring and durable steel radius arm. Rear trailing arm type features horizontally mounted aluminium cylinder oil dampers for effective shock absorbtion. Sealed differential gearbox ensures high speed cornering, while full ball bearings and 3-step gear ratio secures maximum transmission efficiency.
Specifications:
Overall length: | 410mm |
Width: | 240mm |
Height: | 145mm |
Transmission type: | rear 2WD |
Suspension: | Front double wishbone. Rear trailing arm |
Tire width/diameter: | Front 21/73mm. Rear 51/88mm |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
It offers superior rear high traction drive characteristics and fuss-free maintenance of parts such as the easy-access differential. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options.
A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 210mm (S), 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.
Features:
- 1/10 scale R/C model assembly kit.
- The chassis is split into front (suspension and servo) and rear (motor and battery) sections. It can be assembled into three different wheelbases: S (210mm), M (225mm) or L (239mm).
- Rear-midship motor powers rear wheels via a differential in the Mid-Rear setup.
- Oil-filled differential gear used from the M-07.
- Features proven M-07 Concept designs: suspension arms, uprights, suspension mounts and aluminum parts.
- Includes CVA oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver.
- Comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees.
- Compatible with M-06 Chassis bodies.
- Compatible with M-07 Concept Hop-Up Option parts such as Aluminum Rear Suspension Mount (Skid Angle Adjustment) (54787), Aluminum Rear Uprights (54781) and Low-Friction King Pin Pipes (54813)
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- M-Chassis Body
- Paint
- AA Batteries for Transmitter
- 1/10 scale R/C assembly kit
- Length: 425mm
- Height: 140mm
- Width: 225mm
- Wheelbase: 255mm
- Durable and lightweight ABS box type frame is matched with a battery case which is compatible with modern power sources such as Tamiya Racing Packs and LF batteries.
- 4-wheel independent suspension consists of coil springs and trailing arms. A wide tread ensures excellent off-road stability.
- Enclosed gearbox includes differential gears for smooth cornering.
- Driveshafts feature dog bone-type joints and dust cover.
- Includes 540-type brushed motor.
Unique to this release:
• Polycarbonate body (0.7mm thickness) is pre-cut and pre-painted in light blue.
• Comes with metal-plated parts (A, E, G and front/rear wheels)
• Window nets, number plates and dummy antenna included.
• Includes new stickers designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS”.
- Adjustable Gear Ratio Yes
- Bearings Plastic bushing
- Body Material Polycarbonate
- Body Stickers Included
- Chassis Material ABS Plastic
- Construction Type Assembly Kit
- Differential Type Gear
- Drive Type 2WD
- Motor 540-brushed type
- Required To Complete 2-channel radio, steering servo, ESC, 7.2volt battery & battery charger
- Scale 1/10
- Shock Damper Oil-filled damper
- Suspension Fully Independent
- Terrain Use Off-Road
Required to complete:
- 2-channel radio
- steering servo
- ESC
- 7.2-7.4volt battery
- charger
This re-release version of the Blackfoot assembly kit features a chassis with a number of updates while keeping largely to that used on the original off-road car released in 1986.
It includes a highly realistic ABS body with roll bar and metal plated front grille parts. The kit also comes with colorful marking stickers and a driver figure.
Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable red ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups.
Superlative cushioning and grip are provided by 123mm-diameter, 60mm-width lug pattern tires on yellow wheels. Efficient and durable universal shafts come with rubber boots. A sturdy sealed gearbox protects the differential inside from dust and dirt.
Specifications:
Length: | 440mm |
Width: | 290mm |
Height: | 270mm |
Wheelbase: | 247mm |
Transmission type: | Rear-Wheel Drive |
Suspension: | Double Wishbone (Front); Trailing Arm (Rear) |
Tread: | Tread: 200mm (Front); 225mm (Rear) |
Tire Width/Diameter: | 60mm/123mm |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 14.7:1 |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
Hit for Six
1976 saw the dawn of the P34, Tyrrell's wonderfully inventive six-wheeled car with four smaller front wheels, that backed up its looks with solid results such as an impressive one-two finish for the team at the 1976 Swedish GP. At the 1977 season-opening Argentine GP, the P34 had a fully-cowled body adorned with a blue and white livery and First National City bank as a sponsor; that car is recreated by this 1/10 scale R/C model assembly kit. The body is injection molded in detailed yet durable plastic, with upper cowl sections molded in white and side pontoons in blue. Stickers are included for depiction of either of Peterson's number 3 or Depailler's number 4 cars, complete with Goodyear tire logos - just apply the stickers, and the body is ready!
Special 6-Wheeled F103 Chassis
The high performance direct drive 2WD chassis utilizes a semi double deck frame with 1.5mm thick upper and 2.5mm thick lower FRP plates. Kingpin coil spring 4-wheel independent front suspension consists of the one-piece lower arm and individual left/right upper arms. One servo controls the steering of all four front wheels. The rear suspension features a rigid T-bar with coil spring and low-friction pads. The spur gear has a built-in ball diff for limited slip effect. Grippy sponge tires masterfully harness the power provided by the motor.
Key Features:
- The body is injection molded in white and blue to realistically depict the Tyrrell P34 1977 Argentine GP version
- The 6-wheel F103 chassis is equipped with friction dampers that allows for high-speed running despite its 2WD design
- Small front and large rear tires are high-grip sponge type
- RS-540 Sports Tuned Motor (TAM53068) is included
What's In The Box?
- Tamiya 6 Wheeler Kitset
- Body Shell
- Decal Sheet
- Instruction Manual
Required for Operation (Not Included)
- 2-Channel Radio set
- Steering Servo
- Electronic Speed Controller
- 7.2V Battery for Chassis
- Compatible Charger
Developed by Porsche for the 1996 endurance racing season, this car was based upon the 911 (993) with carbon fiber body panels and a midship mounted 600hp 3.2-liter flat-6 twin turbo engine.
In addition to three works cars, a number were also said to have been developed for private customers and use upon public roads. This assembly kit creates an R/C model of such a "Street" car, with the sleek, powerful body captured in lightweight polycarbonate and separate parts for the side mirrors and rear wing.
Stickers are included to recreate markings, headlights, taillights and more.
Efficient and Agile: the TA03R-S
Efficient single belt-driven 4WD and quick steering response are the calling cards of the midship motor, short wheelbase TA03R-S chassis. Gearboxes front and rear house differentials for smooth cornering, and are sealed to protect the workings from dust and dirt, while high-performance double wishbone suspension employs oil dampers and utilizes dedicated touring car geometry (camber, caster, etc.), plus delta box lower arms for greater reliability.
Features:
- The stretched form of the body with big rear fenders is accurately captured in lightweight polycarbonate.
- Side mirrors on the front fenders are separate parts, with stickers recreating mirror surfaces.
- A big wing and rear spoiler really add to the racy look of the car. Both are captured using separate parts.
- Mesh wheels are employed front and rear, with different offsets. Racing slicks have sponge tire inserts.
- The 3-piece steering tie-rod uses a center input setup to help ensure a smooth, intuitive drive.
- CVA Super Mini oil dampers are fitted front and rear on the double wishbone suspension.
- The motor in its midship mount, the heart of the TA03R-S' efficient belt-driven 4WD.
- The rear suspension setup uses reliable delta box lower arms, again with CVA oil dampers.
Specifications:
Length: | 444mm |
Width: | 194mm |
Height: | 120mm |
Wheelbase: | 237mm |
Chassis: | Bathtub Type Chassis Frame |
Transmission type: | Belt-Driven 4WD |
Differential type: | Front/Rear 4-Bevel Resin Differentials |
Suspension: | 4-Wheel Independent Double Wishbone Suspension |
Dampers: | CVA Oil Dampers |
Gear Ratio: | 8.51:1 (kit-standard 14T pinion) |
Motor: | Type 540 motor (included) |
Electronic speed Controller: | Sold Separately |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
GF-02 chassis
The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensure stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods.
Features:
- 1/10 R/C assembly kit. Wheelbase: 267 mm
- Front/Rear tread: F: 223mm / R: 221mm.
- V-Block pattern Block Tires 122.8mm diameter.
- Gear Ratios: 18T (18.03:1), 20T (16.23:1), 17T (19.09:1) Kit is supplied with 18 tooth pinion gear.
- 4WS-four-wheel steering compatible with separately sold third-party 4WS function radio.
- Body post position same as long wheelbase CC-02 chassis.
- Includes 540 brushed type motor and ESC.
Specifications:
Wheelbase: | 267mm |
Transmission type: | 4WD |
Differential type: | Gears |
Suspension type: | Fully Independent Double Wishbone |
Damper: | Friction type |
Gear Ratio: | Gear Ratios: 18T (18.03:1), 20T (16.23:1), 17T (19.09:1) Kit is supplied with 18 tooth pinion gear. |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
TT-01 Type E Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame are a fiberglass reinforced nylon upper deck and gear covers which improve rigidity, as well as a 3-piece tie rod to provide smooth steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to result in superb driving characteristics.
Separately Required Items
- Electronic Speed Controller
- 2-channel R/C system
- Battery pack and charger
- Batteries for transmitter
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Rally Block tires with width/diameter of 27/69mm are also included.
Features:
- 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L).
- Polycarbonate body pre-painted in White.
- Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps.
- Polycarbonate front and rear light cases are compatible with separately sold Tamiya 5mm LEDs.
- Stickers are included to recreate blue livery sections, sponsor logos and more.
- The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
- Tamiya Torque Tuned Motor included.
Specifications:
Length: | 414mm |
Wheelbase: | 239mm (L) |
Transmission type: | 4WD |
Differential type: | Gears |
Suspension type: | Fully Independent Double Wishbone |
Damper: | Friction type |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
This assembly kit creates the Comical Hotshot, an exciting off-road buggy inspired by that Tamiya legend the Hotshot. It comes with a stylish polycarbonate body pre-painted in red and with body mount holes already made; depictions of megaphone rear exhausts add a nice touch.
The front bumper has space for the installation of four separately-sold LEDs. The GF-01CB chassis employs highly capable gear-driven 4WD and is paired with ST block bubble tires - take it for a spin on- or off-road and you'll have a whale of a time!
GF-01: Seriously Stable 4WD
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering.
This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and a range of Hop-Up Option parts are available to hop-up your model.
Features:
- The legendary Hotshot body is reinterpreted in polycarbonate, and makes a great pairing with the oversized tires.
- This image gives a closer look at the front double wishbone suspension, which employs high performance CVA oil dampers.
- Positioned behind a side guard in the center of the monocoque chassis, the motor powers the model via a gear-driven setup
- Wide tread gives superb stability, even when wheelie-ing. Like the front, the rear setup is also double-wishbone with CVA dampers.
- These exciting two-piece wheels utilize red rims and white spokes to match the body colors. ST bubble block tires give a capable drive.
- Depictions of big megaphone design exhaust tips add real character to the model, and a wheelie bar helps prevent it tipping during wheelies
- Four each of square and round light pods are included, and can have separately sold LEDs installed to give your model a fresh look!
Specifications:
Length: | 345mm |
Width: | 244mm |
Height: | 191mm |
Wheelbase: | 170mm |
Transmission type: | Gear-Driven 4WD |
Suspension: | 4-Wheel Double Wishbone Suspension |
Dampers: | Oil Filled Front/Rear CVA |
Tread: | 188mm (Front), 184mm (Rear) |
Tire Width/Diameter: | 46/99mm (Front), 56/99mm (Rear) |
Electronic Speed Controller: | Required |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 18.3:1 |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
The R/C Midnight Pumpkin (first released in 1987) was loved for its camp appearance as much as for its R/C performance. The 1950's style U.S. style pick-up truck body is raised up over the monster truck wheels to ensure that this R/C truck will get attention anywhere you choose to drive it.
2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swing-arms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces.
Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.
Specifications:
Length: | 385mm |
Width: | 290mm |
Height: | 225mm |
Transmission type: | rear 2WD |
Suspension: | Front independent swing axle and rigid axle rear suspension |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front or rear wheel drive system.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front or rear wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L)
- The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
- Features 60mm front and rear tires.
- This kit includes livery stickers to create a design inspired by the numerous amateur club racers.
- Includes 540-Type brushed motor.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup).
- The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases (*), and front- or rear- wheel drive system. Six setups are available in total.
- Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
- Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
- The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
- While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
- Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
- Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
- Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
- Includes 540 motor and ESC.
Specifications:
Length: | 322mm |
Width: | 163mm |
Wheelbase: | 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup). |
Transmission type: | 2WD |
Differential type: | Gears |
Gear ratio: | 5.83:1 (when using kit-standard 29T pinion gear) |
Suspension type: | 4-wheel double wishbone suspension features symmetrical structure |
Damper: | Friction type |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.
Features:
- 1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).
- The body is breathtakingly recreated in durable, lightweight polycarbonate.
- Separately molded plastic components recreate side mirrors and rear wings.
- The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
- Polycarbonate light cases are compatible with separately sold 5mm LEDs.
- Stickers are included to recreate body details and logos.
- A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Specifications:
Length: | 400mm |
Width: | 180mm |
Height: | 132mm |
Wheelbase: | 239mm (L-size wheelbase) |
Transmission type: | 4WD |
Differential type: | Gears |
Suspension type: | Fully Independent Double Wishbone |
Damper: | Friction type |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
About the X-SA series
Kits are a big part of what we do here at Tamiya, but we also understand that some people may not have the time or confidence for the assembly of an R/C model – that is why we have come up with the X-SA (Expert-Semi-Assembled) series of models. Each product features a fully-assembled and setup chassis with our TEU-105BK ESC (electronic speed control) included, plus a fully painted body with the marking stickers already applied. All you need to do is provide the R/C equipment and battery pack, install it, and you’re ready to drive.
• 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 260mm.
• Features a stylish, tough styrene body, which comes with stickers already applied.
• The durable, easy-assembly 2WD chassis employs a box type frame with front swing arm independent and rear rolling rigid suspension setups.
• Big 115mm diameter semi-pneumatic tires on yellow wheels offer a dynamic drive on even the toughest of surfaces.
• The sealed rear gearbox protects the differential inside from dust and dirt.
• A rear wheelie bar supports the model for wheels-in-the-air action when you slam on the throttle.
• Comes with the TEU-105BK ESC.
Specifications:
- Adjustable Gear Ratio Fixed
- Bearings Plastic bushing
- Body Material ABS Plastic pre-painted body
- Body Stickers Pre-Applied
- Chassis Material ABS Plastic
- Construction Type Expert-Semi-Assembled
- Differential Type Gear
- Drive Type 2WD
- Electronic Speed Control (esc) Included TEU-105BK ESC
- Motor 540-brushed type
- Scale 1/12
- Shock Damper Friction type
- Suspension Independent front/solid axle rear
- Terrain Use Multi-Purpose
Required Items (Sold Separately)
- Transmitter/Receiver
- Steering servo
- Battery
- Charger
- AA Batteries for Transmitter
About the X-SA series
Kits are a big part of what we do here at Tamiya, but we also understand that some people may not have the time or confidence for the assembly of an R/C model – that is why we have come up with the X-SA (Expert-Semi-Assembled) series of models. Each product features a fully-assembled and setup chassis with our TEU-105BK ESC (electronic speed control) included, plus a fully painted body with the marking stickers already applied. All you need to do is provide the R/C equipment and battery pack, install it, and you’re ready to drive.
• 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm.
• The classic Lunch Box body is molded in styrene plastic in the original yellow, with the legendary markings already applied.
• Yellow wheels are paired with 115mm tires for some serious off-road capacity.
• The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups.
• A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris.
• Features a rear wheelie bar for wild wheels-in-the-air driving.
Specifications:
- Adjustable Gear Ratio Fixed
- Bearings Plastic bushing
- Body Material ABS Plastic pre-painted body
- Body Stickers Pre-Applied
- Chassis Material ABS Plastic
- Construction Type Expert-Semi-Assembled
- Differential Type Gear
- Drive Type 2WD
- Electronic Speed Control (esc) Included TEU-105BK ESC
- Motor 540-brushed type
- Scale 1/12
- Shock Damper Friction type
- Suspension Independent front/solid axle rear
- Terrain Use Multi-Purpose
Required Items (Sold Separately)
- Transmitter/Receiver
- Steering servo
- Battery
- Charger
- AA Batteries for Transmitter
About the X-SA series
Kits are a big part of what we do here at Tamiya, but we also understand that some people may not have the time or confidence for the assembly of an R/C model – that is why we have come up with the X-SA (Expert-Semi-Assembled) series of models. Each product features a fully-assembled and setup chassis with our TEU-105BK ESC (electronic speed control) included, plus a fully painted body with the marking stickers already applied. All you need to do is provide the R/C equipment and battery pack, install it, and you’re ready to drive.
• 1/10 scale finished R/C model. Length: 389mm, width: 223mm, height: 135mm.
• Features a realistic and durable styrene body, which comes with the classic Grasshopper (2005) stickers already applied.
• Simple, yet tough, 2WD chassis that can absorb plenty of rough terrain.
• The sealed gearbox contains a differential for smooth driving and cornering, enhanced by paddle tread rear and grooved front tires on three-piece assembly type wheels.
• Capable suspension uses independent swing axle front and rigid axle rear setups, cushioned by coil-sprung dampers.
• Comes with the TEU-105BK ESC.
• Requires separately sold: 2-channel radio, steering servo, and 7.2volt battery pack and compatible charger.
Specifications:
- Adjustable Gear Ratio Fixed
- Bearings Plastic bushing
- Body Material ABS Plastic pre-painted body
- Body Stickers Pre-Applied
- Chassis Material ABS Plastic
- Construction Type Expert-Semi-Assembled
- Differential Type Gear
- Drive Type 2WD
- Electronic Speed Control (esc) Included TEU-105BK ESC
- Motor 380-brushed type
- Scale 1/10
- Shock Damper Friction type
- Suspension Independent front/solid axle rear
- Terrain Use Multi-Purpose
Required Items (Sold Separately)
- Transmitter/Receiver
- Steering servo
- Battery
- Charger
- AA Batteries for Transmitter
The R/C Midnight Pumpkin (first released in 1987) was loved for its camp appearance as much as for its R/C performance. The 1950's style U.S. style pick-up truck body is raised up over the monster truck wheels to ensure that this R/C truck will get attention anywhere you choose to drive it.
2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swing-arms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces.
Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.
Specifications:
Length: | 385mm |
Width: | 290mm |
Height: | 225mm |
Transmission type: | rear 2WD |
Suspension: | Front independent swing axle and rigid axle rear suspension |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
About the X-SA series
Kits are a big part of what we do here at Tamiya, but we also understand that some people may not have the time or confidence for the assembly of an R/C model – that is why we have come up with the X-SA (Expert-Semi-Assembled) series of models. Each product features a fully-assembled and setup chassis with our TEU-105BK ESC (electronic speed control) included, plus a fully painted body with the marking stickers already applied. All you need to do is provide the R/C equipment and battery pack, install it, and you’re ready to drive.
• 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm.
• Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied.
• The chassis comes ready-assembled.
• Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers.
• Sealed rear gearbox protects diff gear during off-road running.
Specifications:
- Adjustable Gear Ratio Fixed
- Bearings Plastic bushing
- Body Material Polycarbonate pre-painted body
- Body Stickers Pre-Applied
- Chassis Material ABS Plastic
- Construction Type Expert-Semi-Assembled
- Differential Type Gear
- Drive Type 2WD
- Electronic Speed Control (esc) Included TEU-105BK ESC
- Motor 540-brushed type
- Scale 1/10
- Shock Damper Friction type
- Suspension Independent front/solid axle rear
- Terrain Use Multi-Purpose
Required Items (Sold Separately)
- Transmitter/Receiver
- Steering servo
- Battery
- Charger
- AA Batteries for Transmitter
Another one of Tamiya's classic creations, the R/C Lunch Box (First released in 1987) was loved for its original appearance as much as for its R/C performance.
The boxy minivan body has been raised up over monster truck wheels to ensure that this R/C van will grab the attention wherever you choose to drive it. Use the sides of the van as a canvas to paint your own original designs for the ultimate conversation piece!
2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swing-arms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces.
Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.
Specifications:
Length: | 385mm |
Width: | 290mm |
Height: | 225mm |
Transmission type: | rear 2WD |
Suspension: | Front independent swing axle and rigid axle rear suspension |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals!
Shaft-Driven 4WD and Superior Handling from the TT-02B
The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while left and right suspension arms and uprights are identical to facilitate hassle-free assembly. Front and rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening four screws, making maintenance a breeze. Four different gear ratios can be applied with the use of three separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.
Specifications:
Length: | 380mm |
Width: | 250mm |
Height: | 145mm |
Wheelbase: | 266mm |
Transmission type: | Shaft-Driven 4WD |
Suspension: | 4-Wheel Double Wishbone Suspension |
Dampers: | Oil Filled Front/Rear CVA |
Tread: | Tread: 217mm (Front), 208mm (Rear) |
Tire Width/Diameter: | 60mm/123mm |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 10.71:1 (using kit-included pinion gear) |
The R/C model assembly kit recreates the 2002 Mercedes-Benz CLK AMG Racing Version and is based on our popular TT-02 chassis. The body used in this kit was last seen on product 58296 CLK-DTM 2002 AMG-Mercedes on the TL-01LA chassis from 2002. It’s now being used to create the iconic race car as it appeared as the homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. This version of the kit comes with a pre-painted body which helps speed up the assembly process for anxious hobbyists wanting to hit the pavement quickly.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD.
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features include:
- 1/10 scale R/C model assembly kit. Length: 444mm, width: 185mm, height: 125mm. Wheelbase: 257mm.
- A lightweight, durable 1.0mm thick pre-painted polycarbonate body is included in this version. Note: Body stickers and assembly of accent parts need to be done by the assembler.
- Separate parts realistically depict side mirrors and rear wings.
- The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
- 16-spoke silver color wheels are paired with racing slick tires.
- Comes with stickers and window masking tape for use in the paint job.
- Includes ESC and motor.
Required Items (Sold Separately)
- 2 Channel Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
The revolutionary 1984 2WD off-road buggy is back and more fun than ever before! The Hornet stands as one of Tamiya's most popular R/C cars ever released, helping launch a 2WD R/C buggy boom worldwide. Featuring excellent performance on both dirt and on-road tracks, this awesome buggy can take on any type of terrain.
Just like the original, this re-release features an easy to assemble chassis and drivetrain consisting of a durable but lightweight ABS resin bathtub frame, diff gear loaded sealed gearbox, oil filled rear dampers, powerful RS 540 motor and high performance suspension system.
The Hornet is perfect for those that used to have one, those that have always wanted one, and for those that want a revolutionary buggy that has earned its place in R/C history.
Specifications:
Length: | 400mm |
Width: | 230mm |
Height: | 150mm |
Transmission type: | rear 2WD |
Suspension: | Front independent swing axle and Rolling rigid axle rear suspension with oil filled dampers |
Electronic Speed Controller: | Included |
Motor: | Includes a 540-type motor |
Tires: | Straight ribbed racing front tires Spiked buggy rear tires |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
This exciting shaft-driven 4WD R/C buggy assembly kit creates the Plasma Edge II, and includes stylish polycarbonate body and rear wing parts. Marking stickers add to the racy mood of the model, as do fluorescent yellow star dish wheels and white CVA oil shocks. The TT-02B is a dedicated off-road buggy chassis that offers hassle-free assembly and maintenance, as well as superb controllability.
Shaft-Driven 4WD and Superior Handling from the TT-02B
The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while left and right suspension arms and uprights are identical to facilitate hassle-free assembly. Front and rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening four screws, making maintenance a breeze. Four different gear ratios can be applied with the use of three separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.
Specifications:
Length: | 380mm |
Width: | 250mm |
Height: | 145mm |
Wheelbase: | 266mm |
Transmission type: | Shaft-Driven 4WD |
Suspension: | 4-Wheel Double Wishbone Suspension |
Dampers: | Oil Filled Front/Rear CVA |
Tread: | Tread: 217mm (Front), 208mm (Rear) |
Tire Width/Diameter: | 60mm/123mm |
Electronic Speed Controller: | Included |
Motor: | Type 540 motor (Included) |
Gear Ratio: | 10.71:1 (using kit-included pinion gear) |
This is an exciting R/C model assembly kit recreating the Team Hahn Racing MAN TGS truck which stars on the truck racing circuit in Europe.
The realistic body is a 4-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts.
The TT-01 Type-E chassis is a proven performer, and here is fitted with dedicated new wheels and tires for the model.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action.
The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
- Beautifully detailed plated wheels and 70mm-diameter tires were designed just for this model.
- Engine, turbocharger and frame are succinctly depicted. Side mirrors, coupler, etc. are separately molded.
- Light cases for headlights are provided, and can be lit up with the aid of separately sold LEDs.
- The TT-01 Type-E chassis is a tried and tested unit that offers controllable shaft-driven 4WD. Plenty of Hop-Up option parts are available!
- The form of the tractor head is artfully depicted using a 4-piece polycarbonate body. Multiple stickers are included to recreate markings.
Specifications:
Length: | 438mm |
Width: | 190mm |
Height: | 207mm |
Wheelbase: | 257mm |
Tire Width/Diameter: | 28/70mm |
Chassis: | Bathtub Type Chassis Frame |
Transmission type: | Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD |
Differential type: | F/R 3-Bevel Differentials |
Suspension: | 4-Wheel Double Wishbone Suspension |
Gear Ratio: | 8.35:1 |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- 540 Motor
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
This is an exciting R/C model assembly kit recreating the Team REINERT Racing MAN TGS truck which starred on the 2016 European truck racing circuit.
The realistic body is a 4-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts.
Stickers are included in the kit to recreate the truck's numerous sponsor markings and logos, etc. The TT-01 Type-E chassis is a proven performer, and here is fitted with dedicated racing truck model wheels and tires.
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.
Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action.
The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.
Features:
- Beautifully detailed plated wheels and 70mm-diameter tires were designed just for this model.
- Engine, turbocharger and frame are succinctly depicted. Side mirrors, coupler, etc. are separately molded.
- Light cases for headlights are provided, and can be lit up with the aid of separately sold LEDs.
- The TT-01 Type-E chassis is a tried and tested unit that offers controllable shaft-driven 4WD. Plenty of Hop-Up option parts are available!
- The form of the tractor head is artfully depicted using a 4-piece polycarbonate body. Multiple stickers are included to recreate markings.
Specifications:
Length: | 438mm |
Width: | 190mm |
Height: | 207mm |
Wheelbase: | 257mm |
Tire Width/Diameter: | 28/70mm |
Chassis: | Bathtub Type Chassis Frame |
Transmission type: | Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD |
Differential type: | F/R 3-Bevel Differentials |
Suspension: | 4-Wheel Double Wishbone Suspension |
Gear Ratio: | 8.35:1 |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- 540 Motor
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. The kit features a number of updates while keeping largely faithful to the original model.
Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. This Limited-Edition release features a black molded plastic body that only needs stickers to be applied!
A Durable Off-Road Chassis
A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.
Features:
1/10 scale R/C 2WD buggy model assembly kit. Length: 400mm, width: 223mm, height: 136mm.
Black injection molded polystyrene body just requires application of stickers for easy completion.
Unpainted driver figure included.
ABS chassis uses front swing arm and rear rolling rigid suspension setups.
Fully enclosed gearbox contains a differential gear to aid smooth cornering.
Longitudinal battery is easily removable from the back of the chassis.
CVA oil shock dampers included.
Includes 380-brushed type motor.
Requires: ESC, 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.
Specifications:
- Adjustable Gear Ratio Fixed
- Bearings Plastic bushing
- Body Material ABS Plastic
- Body Stickers Included
- Chassis Material ABS Plastic
- Construction Type Assembly Kit
- Differential Type Gear
- Drive Type 2WD
- Motor 380-Brushed Type
- Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger
- Scale 1/10
- Shock Damper CVA Oil Filled
- Suspension Front swing arm and rear rolling rigid suspension setup
- Terrain Use Multi-Purpose
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
About the Audi V8 Touring:
The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Specifications:
Length: | 463mm |
Width: | 188mm |
Height: | 138mm |
Wheelbase: | 257mm |
Chassis: | Bathtub Type Chassis Frame |
Transmission type: | Shaft-Driven Full-Time 4WD |
Differential type: | Front/Rear 4-Bevel Resin Differentials |
Suspension: | 4-Wheel Double Wishbone Suspension |
Gear Ratio: | 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) |
Motor: | Type 540 motor (included) |
Electronic speed Controller: | Included |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- ESC
- Paint
- Battery
- Charger
- AA Batteries for Transmitter
This assembly kit creates an updated re-release version of the classic R/C off-road buggy Thunder Dragon, which appeared in a Japanese cartoon in the 1980s. Its ABS bathtub frame is tough and allows easy maintenance, while 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride.
Sealed gearboxes front and rear contain differentials with die-cast 3-bevel types for smooth, superior handling feel, and semi-pneumatic spike tires give great grip. The streamlined body is molded in polycarbonate, with non-canopy sections painted in silver. It is pre-cut for convenience.
Tough Shaft-Driven 4WD
The midship motor, shaft-driven 4WD chassis is based around a lightweight and tough monocoque, with 4-wheel independent double wishbone suspension attached to gearboxes: an easy maintenance layout using upper "I" and lower "H" arms. Dual CVA oil dampers at the rear and a single one in the front monoshock setup are joined by a front stabilizer for optimal flex.
Gear differential units front and rear are in sealed gearboxes, and an aluminium motor mount further improves reliability.
Features:
- Front double wishbone suspension utilizes upper "I" arms and lower "H" arms for a ground hugging drive.
- A front monoshock setup employs a CVA oil damper and helps limit roll when your buggy is cornering.
- A close-up on the aluminum motor mount, which facilitates rigidity and superior heat dissipation.
- The double wishbone suspension setup at the rear employs dual CVA oil dampers for a smooth ride.
- Dish design wheels help mud and dirt to slide right off, and are paired with grippy spike tires.
- A polycarbonate chassis cover provides protection from dirt, and features a driver figure for realism.
Specifications:
Length: | 390mm |
Width: | 240mm |
Height: | 139mm |
Transmission type: | Shaft-driven 4WD |
Suspension: | 4-wheel independent double wishbone suspension |
Electronic Speed Controller: | sold separately |
Motor: | Includes a 540-type motor |
Differentials: | 3-bevel differential gears (front and rear) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
This is an updated re-release version of the Fire Dragon, a 4WD buggy originally sold in 1989 and based upon a car in the popular 1980s Japanese comic "Rajicon Boy." Its polycarbonate body features a distinctive swept form, is pre-painted in red, and is even pre-cut for your convenience - just apply the included stickers. An unpainted driver figure is also included for installation in the cockpit.
The chassis is an efficient shaft-driven 4WD unit, with front and rear gear differentials in sealed gearboxes, plus 4-wheel independent double wishbone suspension featuring CVA oil dampers. Spike tires give plenty of grip both on- and off-road.
Efficient Shaft-Driven 4WD
The Fire Dragon (2020) chassis features a shaft-driven 4WD drivetrain married to a lightweight and tough bathtub frame that employs front and rear gearboxes with the suspension attached to them; that suspension utilizes upper "I" and lower "H" arms, and offers a ground-hugging drive. Both gearboxes house a gear differential, and are compact to ensure plentiful ground clearance. The kit also features an aluminum motor mount for superior heat dissipation
Features:
- The stylish, streamlined body features distinctive flared sides. It is pre-painted in red and pre-cut for convenience.
- CVA mini oil dampers are employed on the front suspension. A stabilizer helps combat roll in corners for a stable drive.
- A polycarbonate dust cover for the chassis helps protect the innards from the potentially damaging effects of dust and dirt.
- The Fire Dragon's rear suspension also features CVA oil dampers (short type), for smooth and consistent suspension stroke.
Specifications:
Length: | 390mm |
Width: | 240mm |
Height: | 139mm |
Transmission type: | Shaft-driven 4WD |
Suspension: | 4-wheel independent double wishbone suspension |
Electronic Speed Controller: | sold separately |
Motor: | Includes a 540-type motor |
Differentials: | 3-bevel differential gears (front and rear) |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
1992 was another great year of racing in the German Touring Car Championship (DTM), with rival cars from major makers Mercedes-Benz, Audi and BMW taking one another on. This R/C model assembly kit depicts the Mercedes-Benz 190 E 2.5-16 EVO.II car fielded in 1992 by Team Zakspeed.
It features an accurate polycarbonate body reproduction of the 190 E form with overfenders and front spoiler, plus separate polycarbonate wing parts. Metal-plated components recreate the famed Mercedes emblem and front grille, with separately molded plastic parts depicting side mirrors. Stickers are included to depict numerous logos (including main sponsor Diebels Alt), car numbers and more!
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action.
The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Specifications
- Length:445mm
- Width: 184mm
- Height: 137mm
- Wheelbase: 257mm
- Tire Width/Diameter: 27/67mm
- Bathtub Type Chassis Frame
- Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD
- F/R 3-Bevel Differentials
- 3-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- F/R Friction Dampers
- Gear Ratio=8.35:1
- Type 540 Motor
Separately Required Items
- Electronic Speed Controller
- 2-channel R/C system
- Battery pack and charger
- Batteries for transmitter
Evolved Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action.
The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Features:
- 1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm.
- Body is made of durable polycarbonate, with separate molded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-pointed star emblem.
- Marking stickers included to recreate sponsor logos and numbers on the No.20 car.
- 6-spoke wheels are molded in soft green and paired with slick tires.
- The TT-01 Type-E chassis features shaft-driven 4WD system and full independent suspension that offers easy handling and great customizability.
Separately Required Items
- 2-channel R/C system
- Electronic Speed Controller
- Battery pack and charger
- Batteries for transmitter
TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color mesh wheels are paired with slick tires for a racy finish.
• 1/10 scale R/C model assembly kit.
• The aerodynamically-optimized form of the race version of the WRX STI is accurately rendered in lightweight and durable polycarbonate.
• Separately molded parts are included in the kit to recreate side mirrors and rear wing.
• The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis.
• Gun metal color mesh type wheels are paired with slick tires.
• Stickers are included to recreate the markings of the car, as are masking stickers for use when painting.
• Includes 540-type brushed Torque-Tuned motor.
• An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.
Required to complete:
• Requires 2-channel radio, servo, ESC, 7.2volt battery, and compatible charger, and PS paint to complete.
This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers a responsive drive and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly.
CVA oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, gear differential unit and universal drive shafts.
It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.
Features:
- 1/10 scale R/C model assembly kit
- Monocoque frame chassis (with detachable lower section)
- Long suspension arms and steering linkage components optimize damper leverage ratio
- The chassis' camber can also be adjusted
- Adjust the M-07 Concept's rear toe angle via the insertion of spacers where the suspension mount parts are attached
- One of the key points is the easy-access gear differential unit, which can be removed and changed from the underside
- CVA oil dampers
- Full ball bearings
- Enjoy silky-smooth power from your chassis thanks to full ball bearings, universal drive shafts and gear differential unit
Specifications:
- Length: 332mm (including bumper)
- Width: 164mm
- Wheelbase: 225mm or 239mm (Selectable)
- Monocoque Frame
- Front-Midship Motor, Front-Wheel Drive
- Gear Differential
- 3-Piece Steering Tie-Rod
- 4-Wheel Independent Double Wishbone Suspension
- CVA Oil Dampers
- Gear Ratio = 5.78:1 using included 20T pinion gear (7.22:1 - 4.81:1 available with separately sold pinion gears)
- Requires an Electronic Speed Controller (sold separately)
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- M-Chassis Body
- Paint
- AA Batteries for Transmitter
Get ready for some serious fun, with this assembly kit to create a 2WD buggy mounted with massive tires! It features a molded plastic single-seater body, with parts included to recreate a driver for figure for that extra touch of realism. Stickers are included to apply colored logos including the rear wing Mad Bull design, yellow wheels and red dampers fitting in with the color scheme.
Monocoque RWD Chassis
The rear-wheel drive chassis is constructed around a tough monocoque frame, sporting front swing arm and rear rolling rigid suspension setups. Lug pattern 115mm diameter tires work with the plentiful suspension stroke to ensure an awesome offroad drive. Great news for those looking to save a bit of time on the assembly - wheels are attached to tires, friction dampers come pre-assembled, and uprights are connected to the steering linkage, too!
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
- Paint
Specifications:
Length: 400mm
Width: 315mm
Height: 150mm
Wheelbase: 284mm
Tread: 245mm distance from wheel centers, left to right
Gear Ratio: 1:9.33
Suspension: Front Swing Arm, Rear Rolling Rigid
The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained motor racing fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first world rally champion and its J?germeister orange version achieved a class victory in German circuit races. This is an R/C model assembly kit of such an Alpine A110, its polycarbonate body realistically capturing the distinctive 2-door coupe form in style. Stickers are included to recreate sponsor logos, race numbers and more. The model uses the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rear-mounted motor.
Great RR Performance from the M-06:
The M-06 chassis features a rear-mounted motor, rear-drive setup and has a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses gray colored wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.
Specifications:
- Length: 395mm
- Width: 168mm
- Height: 121mm
- Wheelbase: 210mm
- Tread (front/rear): 138mm
- Rear-motor, rear-wheel drive
- 3-bevel differential gear
- 3-piece steering tie-rod
- 4-wheel independent double wishbone suspension
- Front/rear friction dampers
- Gear ratio = 5.8:1 (using kit-standard 20T pinion)
- Tire width/diameter (front/rear): 25mm/59mm
- Type 540 motor
Required Items (Sold Separately)
- Transmitter/Receiver
- Electronic Speed Controller
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
Efficient Shaft-Driven 4WD
The chassis features a shaft-driven 4WD drivetrain married to a lightweight and tough bathtub frame that employs front and rear gearboxes with the suspension attached to them; that suspension utilizes upper "I" and lower "H" arms, and offers a ground-hugging drive. CVA oil dampers and a front stabilizer contribute further to an excellent drive. Both gearboxes house a gear differential, and are compact to ensure plentiful ground clearance. The kit also features an aluminum motor mount for superior heat dissipation.
Features:
- The flowing, dynamic body lines are a real treat; it is pre-painted in white, and pre-cut, just requiring application of stickers.
- A durable, easy-maintenance layout employs a bathtub frame with front and rear gearboxes screw-attached to it.
- Double-wishbone suspension features upper "I" and lower "H" arms, and employs a front stabilizer to minimize roll when cornering.
- CVA oil dampers give exemplary shock absorption that translates into a highly controllable drive.
- An aluminium motor mount not only boosts the model's rigidity, it also helps with motor heat dissipation.
- This image is a close up on the CVA oil damper-fitted rear double wishbone suspension.
- Dish wheels attract less mud when driving; they are paired with grippy spike tires.
- The polycarbonate chassis cover includes a depiction of driver arms. The helmet is a separate part.
Specifications:
Length: | 390mm |
Width: | 240mm |
Height: | 135mm |
Differential type: | 3-Bevel Differential Gears |
Suspension type: | 4-wheel independent double wishbone suspension with CVA |
Damper: | Front & Rear Oil Dampers |
Motor: | Type 540 motor (included) |
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
Features:
- 1/10 scale R/C model assembly kit.
- Length: 417mm
- Width: 174mm
- Height: 138mm
- Wheelbase: 239mm (Long wheelbase)
- The body is recreated in lightweight polycarbonate
- Features 60mm front and rear tires. Use 60D tires when changing tires.
- Includes 540-Type motor and ESC.
Required Items (Sold Separately)
- 2-Channel radio system
- Servo
- Electronic Speed Controller
- Battery
- Charger
- Paint
- AA Batteries for Transmitter
Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit.
Also compatible with a whole range of option parts such as oil dampers, 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience.
Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please.
Simple But Tough 2WD Chassis
The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable plastic body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough handling.
Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering.
Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip performance on dirt tracks. Half-body driver figure adds that finishing touch to a fun off-road R/C car.
Specifications:
Length: | 389mm |
Width: | 223mm |
Height: | 135mm |
Transmission type: | rear 2WD |
Suspension: | Front independent swing axle and rigid axle rear suspension |
Electronic Speed Controller: | Included |
Motor: | Includes a 380-type motor A Type 540 motor (sold separately) can also be installed for more power. |
Tires: | Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip on dirt surfaces. |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Battery
- Charger
- AA Batteries for Transmitter
This re-release version of The Grasshopper II R/C off-road car assembly kit features a number of updates while keeping largely to the design of the original released in 1988. It includes a highly realistic injection molded polystyrene resin body, marking stickers and a driver figure. The chassis' streamlined construction and use of a Type 380 motor makes the kit perfect for less experienced users. It is compatible with separately sold race spec Hop-Up Option parts such as Type 540 motors and CVA oil dampers.
A Durable Off-Road Chassis
A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.
Specifications:
Length: | 400mm |
Width: | 223mm |
Height: | 136mm |
Weight: | 760g (excluding R/C equipment) |
Transmission type: | Rear 2WD |
Suspension: | Front independent swing axle and rigid axle rear suspension |
Motor: | Includes a 380-type motor A Type 540 motor (sold separately) can also be installed for more power. |
Tire Width/Diameter: | Front: 19mm/74mm Rear: 36mm/82mm |
Required Items (Sold Separately)
- Transmitter/Receiver
- Servo
- Electronic Speed Controller
- Battery
- Charger
- AA Batteries for Transmitter
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
- Maximum continuous current: 75A
- Input voltage: 6.6V - 7.2V
- Dimensions: 41.5mm x 33.4mm x 18mm
- Weight: 45g (including cables)
Features:
- Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response.
- Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over.
- Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it.
- Features overheating and overload protection functions to help ensure that your equipment avoids damage.
- Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs.
LO/HI Battery Cut-off Information:
- LOW & HIGH Battery Low Voltage Protection Feature:
- LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry)
- HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)
★These high-performance oil dampers were designed with M-Chassis models in mind.
★Aluminum cylinders feature a slick black coating on their mirror-surface interior.
★Fluorine resin 2- and 3-hole pistons are included.
★Soft silicone O-rings and fluorine resin spacers minimize oil leakage.
★Resin spring retainers allow setting of spring length.
★Comes with 3 hardnesses of spring.
This versatile ball differential is compatible with a number of our Tamiya buggy re-issues, and gives efficient and controllable power compared to the standard bevel-gear differential.
Features:
- For: Tamiya Buggy Champ / Sand Scorcher / Fighting Buggy
- Material: Metal
- Color: Silver
- Differential adjustment can be performed with the differential installed in the gearbox
- Includes a 1150 ball bearing, 3mm differential balls (x8), plus 4mm and 5mm screws
Features:
- Aluminum Steering Arms x2 (Item 54574)
- Aluminum Steering Posts x2
- Steering Bridge x1 (Item 54575)
- Hi-Torque Servo Saver (Black) x1 (Item 51000)
- TT-02 Hi-Torque Servo Saver Horn x1 (New Part)
- A host of other metal parts for attachment and setup adjustment are included
Saint Dragon body parts are now available in our range of R/C model spare parts.
The body is molded in 0.7mm thickness polycarbonate that is pre-cut, but unpainted so you can decorate it in your desired scheme.
Stickers and small parts for attachment are included in the set.
The stylish, angular Thunder Dragon body comes molded in 0.7mm thickness clear polycarbonate, ready to paint in any scheme you like!
It is pre-cut for your convenience, and masking stickers plus small parts for attachment are also included.
• Lightweight, durable polycarbonate body realistically captures the complex, aerodynamically honed form of the McLaren Senna.
• Black ABS resin plastic parts realistically depict side mirrors and rear wing.
• Includes marking stickers, and window masking stickers for use during the painting process.
• Comes in a smart, dedicated cardboard box.
Specifications:
- Compatible with TT-01, TT-01 Type-E, TT-02 (excluding TT-02B, and TT-02T), TC-01, TA06, TA07, TA08 and TB-05 chassis cars.
- Requires TAMIYA PS paint to paint.
This air remover offers you a faster way of drawing out the bubbles to help save you time during maintenance.
This item can be used for most shocks sizes up to 1/8 long dampers.
Package Includes:
- 1 x Air remover
- 1 x Pump
- 1 x Sticker
- 1 x Instruction manual
Specifications:
- Polycarbonate body. Rear wing and side parts, with halo and side mirrors molded as separate components in polycarbonate-ABS (white).
- Stickers included to decorate your car in the futuristic looking Championship Livery scheme.
- Compatible with TC-01 chassis cars only.
Specifications:
- Lightweight, durable polycarbonate body. Light cases are separate parts, also crafted in polycarbonate.
- Separate injection molded ABS parts (white) are included to recreate side mirrors, bumper and fog lamps.
- Comes with marking stickers for decoration, and window masking stickers for use in the paint process.
- Compatible with 239mm L wheelbase MF-01X cars..
Specifications:
- Compatible with Tamiya TT-01, TT-01 Type-E and TT-02 chassis (short wheelbase)
- Molded polycarbonate construction
- ABS molded plastic side mirrors, black in color
- Stick sheet with body trim and sponsor logos
The body comes complete with vinyl stickers to complete the window trim, headlights, tail lights and other livery markings. A handy window masking seal is also included for easy masking of the windows when painting your body.
Specifications:
- Lightweight and tough polycarbonate body with marking stickers.
- Racing Wing set A (Item 54457) included, with wing stay mounts allowing different aero setups.
- Comes with window masking stickers for painting.
- Compatible with TT-01, TT-02, TB-04, TA-05 and TA06 chassis cars.
- 190mm width
Includes:
- Body set lexan ( no holes drilled )
- Body stickers
- Masking sheets
- Mirrors
- Instructions
Features:
- Size: 1:10
- Wheelbase: 257mm
- Wide: 190mm
Notes:
- Body Set is supplied Unpainted.
- Requires Polycarbonate Paint of choice.
- Pictures are example only of completed body.
Specifications:
- Made of durable polycarbonate material.
- Comes with marking stickers to depict numerous sponsor logos.
- Separately-molded side mirror parts and wing parts included, plus window masking stickers.
- Compatible with 257mm wheelbase touring car chassis.
Specifications:
- 1/10 scale R/C body parts set assembly kit.
- Polycarbonate material.
- Also included are stickers recreating the 1991 Frank Biela No.45 car, and window masking stickers for use in the painting process.
- Compatible with TT-02, TB-04, TB-05, TA06 and TA07 chassis cars.
- NOTE: 257mm wheelbase and narrow tread setup are required.
Specifications:
- Made from lightweight yet durable polycarbonate.
- Front and rear light cases are also molded in polycarbonate.
- Separately molded plastic components depict rear wing and side mirrors.
- Comes with stickers to create markings, plus masking stickers for use when painting.
- Compatible with 257mm wheelbase touring car chassis (TT-02, TB-04, TB-05, TA06, TA07, etc.).
- Requires TAMIYA PS paint to paint.
Specifications:
- Compatible with TA05, TT-01, TGS, TNS, TB-02, TB Evolution IV, TRF415.
- Requires TAMIYA PS paint to paint.
• The Yaris WRC body is made out of vacuum formed polycarbonate. Individual polycarbonate parts recreating front canards, front light cases and rear bumper blocks complete the package.
• Separately molded plastic components depict rear wing and side mirrors.
• Stickers are included to recreate markings, as are masking stickers for use when painting.
Specifications:
- Compatible with 257mm TT-01, TT-02 and XV-01 chassis cars.
- Requires TAMIYA PS paint to paint.
Features:
- This set includes clear polycarbonate parts to depict the body, cockpit and rear wing.
- The eye-catching body is designed by Japanese designer Kota Nezu of Znug design.
- Comes with marking stickers for decoration, masking stickers for use in the paint job process, and small parts for attachment, plus one driver figure.
- Compatible with the TD4 chassis.
Features include:
- This versatile motor features torque ideally suited to off-road cars.
- It utilizes brush damper, terminal heat sink, and chip condenser components.
- A sponge cover is included to protect the motor.
- The gun metal color can has slits to help heat dissipate.
- Features a blue anodized end bell.
- Input voltage: 7.2V
- RPM (without load): 26,500
- Maximum torque: 49mN-m (7.2V)
- Use ball bearings when installing this motor.
- XV-01 series chassis will require motor extension cables.
This Hop-Up Option is for use with the TD4 chassis. It can be used for slippery surfaces, while also protecting the drivetrain.
Included in packet:
- Comes with 20T top gears.
- Pressure plate features low friction anodized surface.
- This set not only protects your drivetrain from overload but also adjusts traction during acceleration.
Includes:
- Body set lexan ( no holes drilled )
- Body stickers
- Masking sheets
- Mirrors
- Lexan light buckets ready for LED's front and rear
- Build instructions
Features:
- Size: 1:10
- Wheelbase: 257mm
- Wide: 188mm
Notes:
- Body Set is supplied Unpainted.
- Requires Polycarbonate Paint of choice.
- Pictures are example only of completed body.
Features include:
- Input voltage: 7.2-8.4V
- RPM (without load): 26,500
- Maximum torque: 500gf-cm (at 7.2V)
- 23T
Comes with a light case for possible front and rear LED lights. The most light connections available with the set: 5mm LED (four lights), 3mm LED (four lights).
- The body is polycarbonate. t=1.0mm no holes
- H/J parts (mirror/light case): ABS Yellow silver light case, one side is plated
- Comes with sticker and masking seal and metal fittings.
- Can be used with the excellent TT-01 chassis. (It meets the short wheel base specifications)
Notes:
- Body Set is supplied Unpainted.
- Requires Polycarbonate Paint of choice.
- Pictures are example only of completed body.
This Hop-Up Option is for use with the TD4 chassis. It can be used for slippery surfaces, while also protecting the drivetrain.
Features:
- Comes with 20T top gears.
- Pressure plate features low friction anodized surface.
- This set not only protects your drivetrain from overload but also adjusts traction during acceleration.
This is a body only and does not include slickers, mirrors etc.
body is supplied with an overspray wrapper on outside of body,Please remove before applying stickers to outside of body.
Note: Body in photo is shown painted but this body comes clear.
Packet Includes:
- 3mm thick Carbon Front Damper Stay x1
- 3mm thick Carbon Rear Damper Stay x1
- Compatible with TT-02B chassis cars.
- This set includes all parts for the large capacity TRF419 gear differential unit.
- Useful for those who want to carry a number of pre-assembled units using different viscosity oil.
Specifications:
- The components in this set can be used to replace kit standard plastic A3 parts.
- Built-in ball bearings combine with the rigidity of the arms for silky smooth motion.
- Steering arm parts have a stylish blue anodized finish.