Agama
Agama 1/8 4wd N1 Nitro Buggy Race Kit (AGM N1)
This is the new innovative N1 Nitro competition Racing Buggy from Agama.
After years of development our revolutionary design concept is finally realised with the production N1. Its unique suspension creates an incredibly low COG (Centre of Gravity) race car, while our engineering teams years of experience has pushed us to ensure that not only is it fast, but it’s the easiest car to work on in its class.
Lower COG makes the N1 more consistent to drive while being able to hold higher corner speeds than your average 1/8th buggy. Its not just in the corners where the N1 excels, through bumps it stays very flat with less tendency to want to flip over and in the air the N1 flies very low and stable as its unique clean aerodynamics have a tremendous effect, working the rear wing to maximum efficiency.
Key Features:
Needed to Complete:
After years of development our revolutionary design concept is finally realised with the production N1. Its unique suspension creates an incredibly low COG (Centre of Gravity) race car, while our engineering teams years of experience has pushed us to ensure that not only is it fast, but it’s the easiest car to work on in its class.
Lower COG makes the N1 more consistent to drive while being able to hold higher corner speeds than your average 1/8th buggy. Its not just in the corners where the N1 excels, through bumps it stays very flat with less tendency to want to flip over and in the air the N1 flies very low and stable as its unique clean aerodynamics have a tremendous effect, working the rear wing to maximum efficiency.
Key Features:
SUPER EASY DIFFERENTIAL ACCESS:
The RAD (Rapid Access Diff) gearbox on the N1 creates incredibly simple diff access. The anti-roll bars and wishbones are both mounted to the lower half of the horizontally split gearbox. Making for incredibly quick and easy diff removal with the pinion gear also being accessible, allowing you to keep driveline sets together. All whilst still maintaining market leading durability and longevity through our DBS (Double Bearing System) driveline.
FULLY CONSISTENT SHOCK STROKE:
The unique, lay-down shock system on the N1 enables a non-resistant stroke through the full suspension travel of the vehicle. With no side load going through the shock shaft, you are treated to the benefit of an ultra consistent suspension feel that won’t change during long finals.
INCREDIBLY EASY TO MAINTAIN:
Maintenance has been a key consideration in the development of the N1, featuring RAD (Rapid Access Diff) access gearboxes for easy and quick diff removal in the front, centre and rear of the buggy. The amount of parts you need to remove for easy maintenance is reduced, allowing you to spend less time wrenching and more time racing. High grade metal and plastic parts are found throughout the kit making sure your car is not only fast, but durable too.
SUPER DURABLE WING MOUNT:
Molded from a new nylon material with incredible flex properties, giving the perfect balance of durability and stability for the rear wing, whilst also freeing up the rear aerodynamics of the N1.
DOUBLE BEARING SYSTEM FOR DIFFERENTIALS:
A staple in the Agama vehicle lineup, the double ball bearing system gives the buggy an incredibly free and secure drivetrain with the load for each diff being spread across 4 bearings, meaning less time re-shimming and more time on the track.
FULLY ENCLOSED WISHBONES:
NEW wishbones have been introduced on the N1, with an enclosed design both front and rear. Enhanced durability and adjustable flex characteristics with the removable arm stiffener. The enclosed design also makes for less dirt pick up and reduced drag on rough sections of track (and its a joy to clean).
SUPER LOW COG:
The innovative lay-down shock design and carefully positioned shock levers, not only give you an incredibly consistent and free shock stroke with no side loading, it also massively reduces the centre of gravity of the buggy, this means you can push harder on the track without the buggy getting unsettled by any bumps and ruts while maintaining a higher corner speed! Magic.
- 1x Agama N1 Nitro Buggy Race Kit
- 1x Product Manual
Needed to Complete:
- 1x LiPo Receiver Pack
- 1x LiPo Charger
- 1x Nitro Race Fuel
- 1x Glow Driver
- 1x 2 Channel Radio (minimum)
- 2x Servos
- 1x Set of 1/8 Scale Off Road Tire
- 1x Competition .21 Engine and Exhaust Pipe
Super Low Centre of Gravity
Agama CNC 7075 Aluminium Centre Differential Top Plate: A319 & N1 (AGM AG-37014-1)
This is a CNC 7075 Aluminium Centre Differential Top Plate from Agama for their A319 and N1 Nitro Buggies.
Can be used with either the plastic or aluminium centre diff mounts on the A319 and N1 Nitro Buggies.
Adds strength to the centre diff area
Agama Buggy Emulsion shock caps (4): A319 & N1 (AGM AG-4290)
This is a packet of (4) Emulsion shock caps from Agama for the full line of buggies and trucks,
The new emulsion shock caps and seals allow for the use of emulsion-style shocks. Well suited to tracks with big jumps and heavy landings, in addition to tracks with looser surfaces.
Thoroughly tested for over 6 months on various track types and surfaces, including the 2017 Euro A's and used on the Junior Euro B winning buggy !
Allowing you to run the cap in 3 different styles:
Non-Vented: Bladder shock (using stock 0003 bladder) and screw included and tight
Vented: Bladder shock (using stock 0003 bladder) and no screw with open bleed hole
Emulsion: O-ring seal used with screw and gasket to offer emulsion shock setup
Includes all items required to build emulsion shocks, retain standard 0003 bladders for normal shock build.
Great tuning option
Agama Body Shell (Clear): N1/N1E (AGM AG-5N0012)
This is a Clear Body Shell from Agama for their new N1 & N1E Buggy.
Replace worn parts as required
Out of Stock
$77.95 Inc Tax
Agama Carbon Fiber Front Arm Stiffeners (2.5mm) (2): N1 (AGM AG-5N9201)
This is a Packet of (2) 2.5mm Carbon Fiber Front Arm Stiffeners from Agama for their new N1 Nitro Buggy.
Add looks and function
Out of Stock
$62.50 Inc Tax
Agama Carbon Fiber Rear Arm Stiffeners (2.5mm) (2): N1 (AGM AG-5N9202)
This is a Packet of (2) 2.5mm Carbon Fiber Rear Arm Stiffeners from Agama for their new N1 Nitro Buggy.
Add looks and function
Agama Center Differential Spur Gear (47T): N1 (AGM AG-8147)
This is a 47T Center Differential Spur Gear from Agama for their new N1 Nitro Buggy.
Replace worn parts as required
Agama Fuel Tank: N1 (AGM AG-5N1001)
This is a Fuel Tank from Agama for their new N1 Nitro Buggy.
Replace worn parts as required
Kyosho 1/8 Plastic Wing (Black): MP9 TKI4 (KYO KP IF491BK)
This is the replacement Black Plastic Wing from Kyosho included with the MP9 TKI4 Buggy Kit.
Packet includes:
Packet includes:
- (1) Black Kyosho 1:8 Wing
- (2) Wickerbills
- Wickerbill Hardware (high and low downforce)
2 wickerbills included for high or low downforce
Out of Stock
$29.95 Inc Tax
Agama Centre Differential Mount: A319 & N1 (AGM AG-31014)
This is a plastic Centre Differential mount from Agama for their A319 and N1 Nitro Buggies.
Replace worn parts as required
Agama Clutch Shoes (3) and Springs (9) Set: N1 (AGM AG-6001)
This is a packet of Clutch Shoes and Springs from Agama for their Nitro Buggies.
Packet includes:
Note: Shoes are silver not Orange as depicted in the Photo
Packet includes:
- 3 x Clutch Shoes
- 3 x Soft Springs
- 3 x Medium Springs
- 3 x Hard Springs
Note: Shoes are silver not Orange as depicted in the Photo
Used to tune clutch engagement
Kyosho Rear Lower Suspension Arms (2): MP9 (KYO KP IF423)
This is a packet of (2) Rear Lower Suspension Arms from Kyosho for their MP9 1/8 Scale Buggy Kit.
Packet includes:
Packet includes:
- 2 x Rear Lower Suspension Arms
- 8 x inserts to adjust the rear track width
includes inserts to adjust rear track width
Out of Stock
$23.25 Inc Tax
Agama Truggy Fuel Tank: A8T (AGM 1001T)
This is a 150ml Fuel Tank from Agama for their A8T Truggy.
Replace old fuel tanks if air leaks develop
Agama Buggy Fuel Tank: A8 (AGM 1001)
This is a 125ml Fuel Tank from Agama for their A8 Buggy.
Replace old fuel tanks if air leaks develop
Agama Shock Piston (8 holes) 1.3mm (4): A319 & N1 (AGM AG-0074)
This is a packet of (4) 8 hole Shock Piston from Agama for their new N1 Buggy.
Great all around for most tracks
Agama 1/8 Off-Road Wing (Yellow) (AGM 1903)
This is a 1/8 Yellow Buggy Wing from Agama.
High Downforce Version
Agama Upper Arm Link (6): A8/ A8T/A215/A215E/A215T/A215SV (AGM 1007)
This is a packet of (6) Upper Arm Link from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Agama Aluminium Washers (10): A8 / A8T / A215 (AGM 6246)
This is a packet of (10) Aluminium Washers from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Brake Disk (CNC) (2): A8 / A8T / A215 (AGM 9009)
This is a packet of (2) Brake Disk (CNC) from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Buggy Dust boots (Red), (4): N1 (AGM AG-0074)
This is a packet of (4) Red Dust Boots from Agama for their new N1 Buggy.
Personalise your N1 with some coloured highlights
Agama Exhaust Gaskets (4) (AGM AG-0006)
This is a packet of (4) Exhaust Gaskets from Agama.
Replace worn parts as required
Agama Buggy Rear Lower Arms: A8 (AGM 1003)
This is a pair of Rear lower arms from Agama for their A8 Buggy.
Replace old damaged or bent arms
Agama Rear Gear Box Case: A8 / A8T (AGM 1005)
This is a Rear Gear Box Case from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Front Spindle Carriers: A8 / A8T (AGM 1111)
This is a packet of (2) Front Spindle Carriers from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Rear Uprights: A8/ A8T/A215T (AGM 1010)
This is a Rear Uprights from Agama for their A8 Buggy and A8T, A215T Truggies.
Replace old, worn, damaged parts
Agama Hinge Pins (4mm)(4): A8 / A8T / A215 (AGM 8227)
This is a packet of (4) 4mm Hinge Pins from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Differential Outdrives (2): A8 / A8T (AGM 8219)
This is a packet of (2) Differential Outdrives from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Cup Joint (Center): A8 / A8T (AGM 8228)
This is a Center Cup Joint from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama CNC Engine Mount: A8 / A8T / A215 (AGM 7206)
This is a CNC Engine Mount from Agama for their 1/8 A8 & A215 Buggy and 1/8 A8T Truggy Kit Vehicles.
These have also been used on Kyosho MP9 Kits to raise the engine and reduce the flame-out caused by the clutch bell hitting the chassis under hard landings.
These have also been used on Kyosho MP9 Kits to raise the engine and reduce the flame-out caused by the clutch bell hitting the chassis under hard landings.
Also fits the Kyosho MP9
Agama Buggy Front Lower Arms: A8 (AGM 1002)
This is a pair of Front lower arms from Agama for their A8 Buggy.
Replace old damaged or bent arms
Agama Switch Cover Set (4) (AGM 0005)
This is a Switch Cover from Agama which is designed for their A8 Evo 1/8 buggy but will fit other vehicles.
Adds protection to switches
Agama Long Upper Arm Link (2): A8/ A8T/A215/A215E/A215T/A215SV (AGM 1107)
This is a packet of (2) Long Upper Arm Link from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Agama Front Gear Box Case: A8 / A8T (AGM 1004)
This is a Front Gear Box Case from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Rear Shock Shafts (2): A8 / A8T / A215 (AGM 8251)
This is a packet of (4) Rear Shock Shafts from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Shock Seals and Guides Maintenance Pack: A8 / A8T / A215 (AGM 4910)
This is a Shock Seals and Guides Maintenance Pack from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Front Shock Shafts (2): A8T / A215T (AGM 8250T)
This is a packet of (2) Front Shock Shafts from Agama for their A8T & A215T Truggies.
Replace old, worn, damaged parts
Agama Front Shock Shafts (2): A8 (AGM 8250)
This is a packet of (2) Front Shock Shafts from Agama for their A8 Buggy.
Replace old, worn, damaged parts
Agama Rod End Set (4): A8/ A8T/A215/A215E/A215T/A215SV (AGM 1307)
This is a Rod End Set (4) from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Agama Throttle Brake Link: A8 / A8T / A215 (AGM 6003)
This is a packet of (3) Throttle Brake Links from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Suspension Pin Bushing (8): A8/ A8T/A215/A215E/A215T/A215SV (AGM 1116-W)
This is a packet of (8) Suspension Pin Bushings from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
Agama Suspension Pin Bushing (Hollow Type)(8): A8/ A8T/A215/A215E/A215T/A215SV (AGM 1117-W)
This is a packet of (8) Suspension Pin Bushings (Hollow Type) from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.
Replace old, worn, damaged parts
- 1