SWORKz

Further continuing with the successful SWORKz S35-4 1/8 Nitro Buggy platform, the latest S35-4 EVO is designed for an even higher level of racing.

The geometry from the worlds edition conversion kit provides optimized cornering speeds with a more easy handling feel and maximum traction.

The S35-4 EVO features a T7075 hard anodized and lightened aluminum chassis with a new short wheel base design that was tested for a long time by our factory pilots which guarantee the best speed balance for both front and rear suspensions.

HET differentials are included in the kit while the High Density Clutch Bell system are optional.

The new S35-4 EVO comes with a brand new steering Lay-Down Type Steering Bell crank servo savor system. This new Ackerman design provides the driver with better control over the S35-4 EVO buggy.

The SWORKz S35-4 EVO includes the latest Arched-Bridge-System and the higher capacity shock system. This is a big step for S35-4 EVO as it provides better stability to the buggy.

In the kit we also include special BBS pistons and oil seal parts that the worlds team drivers tested during the worlds. The parts are made by a high Precision Plastic mold machine.

Also included are specially made durable material parts for the suspension like inserts which our team drivers prefers and immediately felt more confident with them.

There are many more small changes and ideas in the new SWORKz S35-4 EVO. It is an evolution step designed and tested by the whole team that make the car even better. The secret of a modern racing car is the possibility to adapt the car setup to every track for top pilots but also have a standard setup that works on most tracks for hobby pilots. The SWORKz S35-4 EVO fulfills these two characteristics.

S35-4 EVO Pro Kit Features:

• T7075 Hard Anodized, Lightend Aluminium Chassis (New)
• Short Chassis Design (New) 
• Higher Shock Towers (New)
• Longer Shock Bodies (New)
• Shorter Shock Shafts
• S35 Series BBS System Hex-Cell Shock (New)
• Shorter Front Shock Springs
• SWORKz 1/8 BBS Precision Plastic Shock Piston (New)
• Fixed Shock Spring Holder
• 3mm Updated Rear Shock Studs
• Ackerman Plate (New)
• Steering System (New)
• Servo Saver Aluminium Part (New)
• Servo Saver Plate (New)
• Servo Saver Post Locking Design (New)
• Steering Ball Studs (New)
• Steering Knuckle Plates (New)
• Updated Toe In Plates with Square Inserts (New)
• Aluminum Intensity F/F and R/F Narrow Lower Suspension Plate (New)
• New Carbon Center Diff Plate with Throttle Servo Linkage System (New)Nitro Series Center Brake Disk Holder (New)
• Lightweight Wing Mount
• SWORKz S35-4 Series Arched-Bridge-System Rear Lower Arm Set (New)
• Composite Rear Hubs with Carbon Plates
• Multi Adjustable Ball System for Rear Upper Arms
• Anticlock Screws for Shocks
• Aerodinamically Optimized Body Shell
• 3 HET Differentials Included
• 2 Front Chassis Braces Included
• Black Competition Shock Springs Included
• Adjustable Wing Position
• Adjustable Wing Angle
• More Balance Weight Positions
• Stronger Downstop Area
• Optimized Composite Material
• Aluminium Parts in T7075

Specifications:

• Length： 510mm
• Width： 308mm
• Height： 220mm
• Ground Clearance： 65mm
• Wheelbase： 325-330mm
• Track：F:304mm / R:306mm
• Gear Ratio: C:47/13T, F/R:43/13T
• Weight：3400g (Race condition)

• .21 Class Engine
• Tuned Exhaust System
• 2-Channel Radio System
• (2) High Torque Servo
• Receiver Battery
• Glow Driver & Starting System
• Nitro Fuel & Fuel Bottle
• Paint for Polycarbonate Body
• Tyres, Wheels & Glue

NOTE: Completed vehicle shown for illustrative purposes only and is not included.

The S35-4e EVO is the design evolution from S35-4E Euros Champion.

Continue the successful SWORKz S35-4E 1/8 Electric Buggy platform, the new S35-4e EVO is designed for more higher level racing product.

The new geometry from European Champion Edition conversion kit provides optimized corner speed compared with more easy handling and maximum traction.

The S35-4e EVO features a T7075 hard anodized and lightened aluminum chassis with a new short wheel base design, that was tested for a long time by our factory pilots to guarantee the best speed balance for both front and rear suspensions.

The standard HET differentials are included and provide High Density Motor Pinion Gear system for options.

The new S35-4e EVO comes a brand new steering Lay-Down Type Steering Bellcrank servo savor system. With this new Ackerman design gives the driver the feeling of total control over the S35-4e EVO.

The SWORKz S35-4e EVO standard includes the Arched-Bridge-System and the higher capacity shock system. This is a big step for S35-4e EVO, the design made the car go faster and be more stable.

In the kit we include a special BBS piston and oil seal parts that the worlds team drivers tested during the race. They are made by a high Precision Plastic mold machine.

Also included are specially made durable material parts for the suspension like inserts which our team drivers used and felt immediately more confident.

The center chassis lay out is the brand new design for S35-4e EVO. Its provides 2 ways battery set up. Standard 2S peck batteries (or 2S shorty) can be used in saddle position for lower center of gravity. And one unit 4S standard peck(or shorty) also can be fit in side position.   

There many more small changes and smart ideas in your new SWORKz S35-4e EVO, it’s the evolution result which works by whole team that make the car being a real winner. The secret of a modern racing car is the possibility to adapt the setup to every track for top pilots but also have a standard setup that works on most tracks for hobby pilots. And your SWORKz S35-4e EVO is having these two characteristics in perfection.

S35-4e EVO Pro Kit Features:

• T7075 Hard Anodized, Lightend Aluminium Chassis (New)
• Short Chassis Design (New) 
• Higher Shock Towers (New)
• Longer Shock Bodies (New)
• Shorter Shock Shafts
• S35 Series BBS System Hex-Cell Shock (New)
• Shorter Front Shock Springs
• SWORKz 1/8 BBS Precision Plastic Shock Piston (New)
• Fixed Shock Spring Holder
• 3mm Updated Rear Shock Studs
• Ackerman Plate (New)
• Steering System (New)
• Servo Saver Aluminium Part (New)
• Servo Saver Plate (New)
• Servo Saver Post Locking Design (New)
• Steering Ball Studs (New)
• Steering Knuckle Plates (New)
• Updated Toe In Plates with Square Inserts (New)
• Aluminum Intensity F/F and R/F Narrow Lower Suspension Plate (New)
• Brand New Center Chassis Lay Out Design (New)
• Easy Change Motor Mounting Plate (New)
• Brand New Steering Servo Holder (New)
• Brand New Radio ESC Case Design (New)
• Brand New Battery Case (New)
• Lightweight Wing Mount
• SWORKz S35-4 Series Arched-Bridge-System Rear Lower Arm Set (New)
• Composite Rear Hubs with Carbon Plates
• Multi Adjustable Ball System for Rear Upper Arms
• Anticlock Screws for Shocks
• Aerodinamically Optimized Body Shell
• 3 HET Differentials Included
• Black Competition Shock Springs Included
• Adjustable Wing Position
• Adjustable Wing Angle
• More Balance Weight Positions
• Stronger Downstop Area
• Optimized Composite Material

Specifications:

• Length： 510mm
• Width： 308mm
• Height： 220mm
• Ground Clearance： 65mm
• Wheelbase： 325-330mm
• Track：F:304mm / R:306mm
• Gear Ratio: C:46/15T, F/R:43/13T
• Weight：3680g (Race condition)

• 1 x Transmitter and Receiver
• 1 x Steering Servo
• 1 x Compatible Battery Charger
• 1 x Tire Glue
• 4 x Tires
• Polycarbonate Paint
• Tools (Please reference the manual for more details)
• 1 x Brushless Motor
• 1 x Brushless ESC
• 1 x 4S 14.8V LiPo Battery or 2x 2S 7.4V LiPo Batteries

NOTE: Completed vehicle shown for illustrative purposes only and is not included.

NOTE: Allow 4-5 days for delivery.


Based on the success of the S14-2, SWORKz further developed its 1/10 off road buggy and came out with the S14-3.

One of its most unique features is the 5mm Axle Universal Cross Drive Shafts that were specially designed and made from SWORKz 1/8th buggy steel material.

For carpet off road racing, we gave up the pivot ball system and went with the C-Hub steering system. With the new C-Hub system, the S14-3 now has a new and improved front and rear suspension shock system.  

The S14-3 new developed front and rear arms are made from strong composite nylon materials.

Standard included in the kit is the new Centre Slipper Clutch System.

The T-7075 aluminum chassis with its center flex system gives more rear grip. When equipped with the new front and rear upper carbon decks, the buggy has even more traction.

The S14-3 includes many high quality parts, a refined shock system and option parts.  

Many SWORKz Factory Team Option Parts are included.

SWORKz utilizes only the highest quality materials and industry leading manufacturing processes resulting in a faster, stronger, and more reliable racing car.

The S14-3 Pro Kit is designed to win

S14-3 Pro Kit Features:

1. T7075 aluminium B.H.C (Black Hard Coated) chassis with its new centre flex system
2. High performance CNC crown gears and pinion gears
3. Unique 5mm Axle Universal Cross Drive Shafts
4. New Centre Slipper Clutch System
5. New Pro-composite Carbon Fibre shock towers with new geometry Shock Positions
6. New design shock bodies with 3mm Teflon hard coated shafts
7. Front and rear arms made from strong composite nylon materials
8. Kit comes standard with both, 9 and 11 degree front C Hubs
9. New Adjustable Steering Plate with New Bell Crank
10. Full aluminium arm holders with adjustable Toe-in Block
11. Aluminium Steering Servo Mount
12. Velocity 2.0 Body Shell with Formula Bulkhead Wing

• 2 Channel Radio System
• Motor & Electric Speed Control
• Steering Servo
• Wheels, Tires & CA Glue
• Pinion Gear
• Polycarbonate Paint for Body
• 2S Shorty LiPo Battery Pack
• Compatible Battery Charger

NOTE: Completed vehicle shown for illustrative purposes only and is not included.

S14-3 Specification:

• 2 Channel Radio System
• Motor & Electric Speed Control
• Steering Servo
• Wheels, Tires & CA Glue
• Pinion Gear
• Polycarbonate Paint for Body
• 2S Shorty LiPo Battery Pack
• Compatible Battery Charger

NOTE: Completed vehicle shown for illustrative purposes only and is not included.

• Dual high-powered 775-size motors for engine-firing torque and long life
• Compatible with most 1/8 off-road nitro vehicles
• Adjustable positioning mounts
• Optimized Rubber Starter Wheel for improved contact with engine flywheel; provides quick and efficient engine starting

This is a replacement Rubber Wheel for inside the SWORKz 1/8 nitro Starter Box (SB800).

This is a replacement Drive Belt for inside the SWORKz 1/8 nitro Starter Box (SB800).