Dynamite RC
Dynamite Multi Hex Wrench Set: Sizes:.050 , 1/16 , 5/64 , 2mm, 3/32 , 3/32 ball, 1.5mm 2.5mm (DYN2950)
Dynamite’s Multi Hex Wrench Set gives users one tool for all of their hex driving needs. The multi hex wrench set comes with the 7 most popular hex sizes with ¼” drive tips that securely store within the handle for compact storage and convenience. In addition, the ¼” drive ends will lock into any electric handheld drill or screwdriver.
Key Features:
Wrench includes the following sizes:
Key Features:
- Aluminium anodized handle
- Hex tips feature a ¼” drive end
- Laser etched tips
- Includes 7 different hex sizes
- Tips are made from durable, high-grade heat treated steel
- Tips securely store within handle
- Includes the following sizes; .050", 1/16", 5/64" 2mm, 3/32", 3/32" ball, 1.5mm, 2.5mm
Wrench includes the following sizes:
- .050”
- 1/16”
- 5/64” 2mm
- 3/32”
- 3/32” ball
- 1.5mm
- 2.5mm
Bits are stored inside handle
Out of Stock
$89.95 Inc Tax
Dynamite Waterproof 60A FWD/REV Brushed ESC (DYNS2210)
This is a waterproof, brushed ESC by Dynamite which is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes.
Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.
NOTE: While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.
Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.
Features:
- 2-3S LiPo compatible
- 5-9 cell NiMH compatible
- Removable mounting tabs
- Crawler Mode
- Small footprint for mounting flexibility
- LiPo safety cutoff
| BEC Voltage: | 5V |
| Full On Resistance: | .0008 ohms |
| Auto Cutoff: | Yes |
| BEC: | Yes |
| BEC Continous Current: | 2A |
| BEC Type: | Linear |
| Battery Input Lead: | 16AWG, 115mm |
| Brakes: | Yes |
| Drive Type: | Forward/Brake/Reverse |
| Forward: | Yes |
| Input Connector Types: | EC3 |
| Input Voltage: | 2-3S Lipo, 5-9 cells NiMH/NiCd |
| Low-Voltage Cutoff Programmable: | Yes |
| Reverse: | Yes |
| Speed Control Type: | Brushed |
| Time Delay Brake: | Yes |
NOTE: While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.
Can handle 2 or 3s LiPo batteries
Out of Stock
$64.95 Inc Tax
Dynamite Waterproof 60A FWD/REV Brushed ESC (DYNM2210)
This is a waterproof, brushed ESC by Dynamite which is NiMH/LiPo compatible and offers forward/brake/reverse and forward/brake drive modes.
Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.
NOTE: While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.
Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.
Features:
- 2S LiPo compatible
- 5-7 cell NiMH compatible
- Removable mounting tabs
- Small footprint for mounting flexibility
- LiPo safety cutoff
| BEC Voltage: | 6V |
| Auto Cutoff: | Yes |
| BEC: | Yes |
| Motor Output Lead: | 16AWG, 115mm |
| Brakes: | Yes |
| Drive Type: | Forward/Brake/Reverse |
| Forward: | Yes |
| Input Connector Types: | EC3 |
| Input Voltage: | 2S Lipo, 5-7 cells NiMH/NiCd |
| Low-Voltage Cutoff Programmable: | Yes |
| Reverse: | Yes |
| Speed Control Type: | Brushed |
| Dimensions: (LxWxH) | 375x370x18mm (56.6mm wide with tabs) |
NOTE: While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.
Waterproof Brushed ESC
Out of Stock
$59.95 Inc Tax
Dynamite Max-Life 8IGHT Aluminium Clutch Shoe Set (4) (DYNP5188)
This is a packet of (4) optional Max-Life Aluminium Clutch Shoes from Dynamite for the Losi 8ight Buggies and Truggies.
Features
- Black anodized for easy identification
- Made from a proprietary aluminium alloy
- Offers superior performance and longevity
- Helps minimize maintenance on busy race days
Long Life Clutch Shoes
Dynamite 15T 550 Brushed Motor (DYNS1215)
This is a 15T 550 Brushed Motor from Dynamite.
a 550 Motor is the same diameter as a 540 motor however the can is longer and therefore will not fit as a replacement in certain applications.
The closed end bell design, low maintenance and factory installed wires make it an easy to operate and install option.
a 550 Motor is the same diameter as a 540 motor however the can is longer and therefore will not fit as a replacement in certain applications.
The closed end bell design, low maintenance and factory installed wires make it an easy to operate and install option.
Specifications:
Type: Brushed
Size: 550
Bearings or Bushings: Bushing
# of Turns/Windings: 15T
Timing: No
Voltage: 4.8 - 9.6V
Cells: 4-8 Ni-Cd/Ni-MH or 2S Li-Po
Overall Diameter: 36mm
Shaft Diameter: 3.175mm
Shaft Length: 15.5mm
Overall Length: 57mm
550 Motor is longer than 540
Out of Stock
$39.95 Inc Tax
Dynamite 20T 540 Brushed Motor (DYN1171)
This is a 20T Brushed Motor from Dynamite which is a replacement for the EXC AMP Desert Buggy and Monster Truck vehicles.
The closed end bell design, low maintenance and factory installed wires make it an easy to operate and install option.
The closed end bell design, low maintenance and factory installed wires make it an easy to operate and install option.
Specifications:
Type: Brushed
Size: 540
Bearings or Bushings: Bushing
# of Turns/Windings: 20T
Timing: No
Voltage: 4.8 - 9.6V
Cells: 4-8 Ni-Cd/Ni-MH or 2S Li-Po
Overall Diameter: 36mm
Shaft Diameter: 3.175mm
Shaft Length: 15.5mm
Overall Length: 50mm
Reliable 20T Brushed Motor
Out of Stock
$39.95 Inc Tax
Dynamite 15T 540 Brushed Motor (DYN1172)
This is a 15T Brushed Motor from Dynamite which is a great replacement motor for any 15 turn application.
The closed end bell design, low maintenance and factory installed wires make it an easy to operate and install option.
The closed end bell design, low maintenance and factory installed wires make it an easy to operate and install option.
Specifications:
Type: Brushed
Size: 540
Bearings or Bushings: Bushing
# of Turns/Windings: 15T
Timing: No
Voltage: 4.8 - 9.6V
Cells: 4-8 Ni-Cd/Ni-MH or 2S Li-Po
Overall Diameter: 36mm
Shaft Diameter: 3.175mm
Shaft Length: 15.5mm
Overall Length: 50mm
Great replacement motor for any 15 turn application.
Out of Stock
$31.50 Inc Tax
Dynamite Platinum Standard Glow Plug, (#4) (Medium) (DYNP5604)
This is a #4 "Medium" Platinum Glow Plug from Dynamite.
"Medium" Off-Road Plug
Dynamite Platinum Standard Glow Plug, (#3) (Hot) (DYNP5603)
This is a #3 "Hot" Platinum Glow Plug from Dynamite.
"Hot" Off-Road Plug
Dynamite Nitro Glow Plug Wrench 5.75'' long (DYN2510)
This is the Nitro Wrench for Dynamite RC.
Gas R/C racers can install and remove glow plugs from their engines with ease, speed, and style with the Dynamite Nitro Wrench.
The Nitro Wrench has a long, 5" shank with 8MM wrench size for the glow plug that can reach down into tall engine heat sink heads.
It's chrome plated for rust resistance and good looks, and features an indestructible, fuel-proof composite plastic "T" handle. A gas pit box essential.
Gas R/C racers can install and remove glow plugs from their engines with ease, speed, and style with the Dynamite Nitro Wrench.
The Nitro Wrench has a long, 5" shank with 8MM wrench size for the glow plug that can reach down into tall engine heat sink heads.
It's chrome plated for rust resistance and good looks, and features an indestructible, fuel-proof composite plastic "T" handle. A gas pit box essential.
Nice easy to use glow plug tool
Out of Stock
$20.50 Inc Tax
Dynamite Platinum Turbo Glow Plug, (#5) (Hot) (DYNP5615)
This is a #5 "Hot" Platinum Turbo Glow Plug from Dynamite.
"Hot" Off-Road Plug
Dynamite Platinum Turbo Glow Plug, (#4) (X-Hot) (DYNP5614)
This is a #4 "Extra Hot" Platinum Turbo Glow Plug from Dynamite.
"Extra Hot" Off-Road Plug
Dynamite Flexible Sensor Cable (250mm) (DYNP1250)
This is a flexible 250mm long Sensor Cable from Dynamite.
We can supply sensor cables in 25mm increments to allow you to neatly run wiring in your vehicle.
250mm Sensor Cable
Out of Stock
$15.95 Inc Tax
Dynamite Lexan Scissors (Straight) (DYN2516)
This is a pair of Straight Body Scissors from Dynamite RC, specifically for cutting straight lines in lexan plastics.
For Lexan and other light plastics
Out of Stock
$15.95 Inc Tax
Dynamite Lexan Scissors (Curved) (DYN2511)
This is a pair of Curved Body Scissors from Dynamite RC.
The curved-tip design allows the modeler to reach into corners and create sharp, smooth radius curves.
The ergonomic handle makes operation comfortable. Also useful as a regular pair of scissors. Every workbench should have a pair!
The curved-tip design allows the modeler to reach into corners and create sharp, smooth radius curves.
The ergonomic handle makes operation comfortable. Also useful as a regular pair of scissors. Every workbench should have a pair!
For Lexan and other light plastics
Out of Stock
$15.95 Inc Tax
Dynamite Flexible Sensor Cable (175mm) (DYNP1175)
This is a flexible 175mm long Sensor Cable from Dynamite.
We can supply sensor cables in 25mm increments to allow you to neatly run wiring in your vehicle.
175mm Sensor Cable
Dynamite RC XT90 to 4mm Banana plug Charge Lead (DYNC0174)
This is an XT90 to 4mm Banana plug Charge Lead from Dynamite RC.
XT90 Charge Lead
Dynamite RC 4s 20cm Balance Lead Extension Wire (2) (DYNC0111)
This is a packet of (2) 20cm Balance Lead Extension Wire from Dynamite for extending the balance lead of a 4s LiPo battery.
The additional length of wire allows more freedom when charging batteries while using LiPo charge bags.
Easier while using LiPo charge bags
Dynamite RC 2s 20cm Balance Lead Extension Wire (2) (DYNC0109)
This is a packet of (2) 20cm Balance Lead Extension Wire from Dynamite for extending the balance lead of a 2s LiPo battery.
The additional length of wire allows more freedom when charging batteries while using LiPo charge bags.
The additional length of wire allows more freedom when charging batteries while using LiPo charge bags.
Easier while using LiPo charge bags
Dynamite RC 3s 20cm Balance Lead Extension Wire (2) (DYNC0110)
This is a packet of (2) 20cm Balance Lead Extension Wire from Dynamite for extending the balance lead of a 3s LiPo battery.
The additional length of wire allows more freedom when charging batteries while using LiPo charge bags.
The additional length of wire allows more freedom when charging batteries while using LiPo charge bags.
Easier while using LiPo charge bags
Dynamite 13AWG Silicone Wire 3', Red (DYN8850)
This is a packet of 13AWG Red Silicone Wire from Dynamite RC.
13AWG is perfect for Stock Racing
Out of Stock
$11.50 Inc Tax
Dynamite RC Big Daddy Fuel Filter (Titanium) (DYN2027)
This is the Big Daddy Fuel Filter in Titanium From Dynamite RC.
Features:
- Available in 2 different anodized colors
- Works with any nitro engine
- Replaceable bronze elements
- Filters high volumes of fuel without restricting flow
Great for 1/8
Out of Stock
$10.95 Inc Tax
Dynamite RC Big Daddy Fuel Filter (Red) (DYN2025)
This is the Big Daddy Fuel Filter in Red From Dynamite RC.
Features:
- Available in 2 different anodized colors
- Works with any nitro engine
- Replaceable bronze elements
- Filters high volumes of fuel without restricting flow
Great for 1/8
Out of Stock
$10.95 Inc Tax
RC Pro Receiver Connector to 4mm Banana plug Charge Lead (DYNC0033)
This is an Receiver Connector to 4mm Banana plug Charge Lead from RC Pro.
Receiver Connector Charge Lead
Out of Stock
$9.95 Inc Tax
Dynamite Aluminium Lock Nut (3mm), Blue (10) (DYN8542)
This is a packet of (10) M3 x .5 x 5.5mm Blue Aluminium Locknuts from Dynamite.
Fits many models, check your manual first
Out of Stock
$9.95 Inc Tax
Dynamite Throttle Return Springs (2) (DYN6640)
This is a packet of (2) Throttle Return Springs from Dynamite RC.
Features:
- Protects engine in the event of the Throttle Linkage detaching from the servo
- Meets all rules and requirements of sanctioning NZRCA events.
A "Must-have" for Nitro Engines
RC Pro JST Female to 4mm Banana plug Charge Lead ( Copy ) (DYNC0032)
This is an JST Female Connector to 4mm Banana plug Charge Lead from RC Pro.
JST Female Charge Lead
Out of Stock
$9.95 Inc Tax
Dynamite RC Battery Case with BEC Connector (DYNC1104)
This is a Battery Case with BEC Connector from Dynamite RC which holds four AA size batteries.
Holds 4x AA Batteries
- 1