Tamiya 1/10 Astute (TD2) and Super Avante (TD4) Double deal

Buy both for additional discount.
$850.00  Inc Tax
$1,210.95
Qty:
This is a special xmas deal when buying both the Astute (TD2) and the Super Avante (TD4) they are both currently already on sale for $400 and $500 however they are discounted a further $50 when purchasing them both together.


Astute (TD2)

This 2WD R/C off-road assembly kit buggy inherits its name from the 1980s Tamiya R/C rear-wheel drive model "Astute." The low-profile, sleek body is designed by Kota Nezu of znug design.

The model features a driver figure in the cockpit and individual front/rear small fenders. Two types (high/low) of wing stays are included to adjust downforce.

Based on a monocoque frame chassis with midship motor and battery pack position toward the rear, the Astute 2022 utilizes front ribbed and rear square spike tires.


TD2 - Superbly Balanced RWD
The TD2 is a rear-wheel drive buggy chassis which employs front inboard suspension for slim, low-profile form, and a monocoque frame with optimum R/C equipment layout. It features a midship transverse motor and transverse battery pack positioned to the rear.

The sealed gearbox has a built-in ball differential to limit slip and 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shafts for use as upper arms facilitate camber angle adjustment.

Front suspension has a skid angle of 25 degrees and angled dampers for smooth performance. Ribbed front and rear square spike tires facilitate stability and great grip. Front wheels are attached by hex hubs.


Features:
  • The TD2 layout has the motor installed midships, while the battery pack in a position toward the rear to aid with traction.
  • A hi-torque servo saver comes included as standard, and helps actuate the steering via a three-piece tie-rod setup.
  • Smooth front inboard suspension has suspension arms with a 25-degree skid angle and CVA oil dampers at a similar gradient.
  • Upper "I" and lower "H" arms are employed in the front suspension. Turnbuckle shaft upper arms allow swift adjustment of camber.
  • The rear suspension setup features a combination of lower "H" arms and upper turnbuckle shafts.
  • The motor is attached in a transverse position to the rear of the battery pack, providing power to a drivetrain with 3 gears.
  • A ball differential is housed in the sealed gearbox. Steel joint cups secure the durability needed for a demanding off-road drive.
  • CVA oil dampers have red springs in keeping with the livery theme of the stylish Astute 2022.
  • Black star dish design wheels are paired with sturdy hex hub nuts and front ribbed tires for superior directionality.
  • At the rear, black star dish wheels are used in combination with square spike tires to give the model plenty of bite.
  • Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders.
  • The cockpit is a particular highlight, with an aircraft-inspired canopy and a driver figure installed inside for superb realism.
  • Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. This image shows low types.
  • Front polycarbonate mini-fenders are screw-attached to their upright. Blue sections are taken care of with stickers.
  • If you like, side pontoon front sections can be left unpainted to provide a window into the car's inner workings!

Specifications:
Overall length:387mm
Width:246mm
Height:125mm
Transmission type:rear 2WD
Suspension:4-wheel double wishbone
Tire width/diameter:Front 27/79mm. Rear 41/82mm


Required Items (Sold Separately)
  • Transmitter/Receiver
  • 540 Type Motor
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

Super Avante (TD4)

Tamiya’s designers have crafted the next fun to drive 4WD off-road buggy, the Super Avante!

The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, “Being Nuts is Neat!” And, the front of the all-new TD-4 chassis, shares a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body.
The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.


TD4 - Low Profile, High Performance
The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment.
Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.


Features:
  • 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.
  • Polycarbonate body (inspired by the Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of Znug Design.
  • Newly designed shaft-driven 4WD chassis based on a one-piece monocoque frame. It features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
  • The TD4 chassis also employs a front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
  • The four-wheel double wishbone suspension system uses CVA oil dampers for fun performance.
  • Features full ball bearings.
  • Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
  • Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
  • Star dish wheels are paired with square spike tires which offer good grip off-road.
  • Choose between high and low type wing stays to adjust the downforce depending on the road surface.
  • Comes with a driver figure for extra realism, and high-torque servo saver.
  • Requires: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.


Specifications:
Length:338mm
Width: 246mm
Height: 124mm
Differential type:3-Bevel Differential Gears
Suspension type:4-wheel independent double wishbone suspension
Damper:Front & Rear Oil Dampers
Motor:Type 540 motor


Required Items (Sold Separately)

  • 2-Channel radio system
  • Servo
  • Electronic Speed Controller
  • 540 type motor
  • Battery
  • Charger
  • Paint
  • AA Batteries for Transmitter





  • Availability: 2 In Stock
  • Model: TAM 58697-58696
  • Manufacturer: Tamiya

Write Review

Note: Do not use HTML in the text.