Special Offers
This Hop-Up Option is for use with the TD4 chassis. It can be used for slippery surfaces, while also protecting the drivetrain.
Included in packet:
- Comes with 20T top gears.
- Pressure plate features low friction anodized surface.
- This set not only protects your drivetrain from overload but also adjusts traction during acceleration.
Features:
- Turnbuckles are 3.5mm in diameter at the threads for durability
- Titanium is very strong and much lighter than the stock steel turnbuckles
This is a Super Differential Kit from MIP, and is intended for use with the Kyosho Ultima RB5, RB6, RT5 and SC 1/10 scale vehicles.
This kit uses genuine MIP products that have been CNC machined in-house for the highest precision quality.
Features:
- Hardened Alloy Steel for superior strength and wear
- High precision molded MIP differential gear to ensure the perfect gear mesh
- Precision machined for excellent bearing fit
- 5/32 x 5/16" precision bearings included
- Fits Kyosho RB6 Chassis
- MIP Team Tested and Approved
- 100% Quality made in the USA
- *Does not include Differential Screw, T-Nut, or Differential Spring
Includes:
- MIP9149: 3/32" Steel Diff Balls
- MIP10112: 5/32" x 5/16" x 1/8" Ball Bearings
- MIP12159: Super Differential Male Outdrive
- MIP12160: Super Differential Female Outdrive
- MIP12161: Super Differential Gear
- MIP12162: Super Differential Rings
- MIP12163: Super Thrust Kit
Needed To Complete:
- TF120: Kyosho Ball Differential Screw Set
- UM509: Kyosho 52T Differential Gear Set (T-Nut)
- UM124: Kyosho Differential Tensioner Spring
This ESC Program Card incorporates the convenience and flexibility of user's own Micro SD card(not included).
With Micro SD technology, it is literally unlimited in storage. With use of Micro SD, download of ORCA's TEAM Drivers setups is greatly facilitated so user can "Drive like a Pro".
Firmware update becomes a breeze now eliminating any computer compatibility previously experienced in last version of Program Card (OPC111VS). Presence of USB Port option allows user to connect the programmer to the computer to download software to the Micro SD card.
This ORCA Program Card comes with a 200mm programming cable. The LCD display is 2-line dot matrix with blue backlit.
This is a Complete Rear Driveshaft Set from Team Losi Racing for their TLR 22T trucks.
Package includes:
- All the necessary parts to assemble two complete rear driveshafts
- 1x tube of TLR threadlock
- 1x tube of TLR grease
NOTE: Do not fit Truggies.
Carrying an assortment of pinion gears has never been easier with the introduction of the Pinion Puck by JConcepts. The circular design and aluminium material surrounds the pinion gear and protects the finish of valued gears from damage. Each Pinion Puck has steel pins pressed into location giving the proper placement for the pinion. The pins also provide a sturdy area for the holding set screw to clamp against.
The JConcepts Aluminium Pinion Puck - Stock Range - features laser etching to indicate proper sizing; ranging from 27-36T in 48 pitch. The center features a recess to hold small components and also etched to indicate overall size of the Puck while displaying JConcepts branding. The Puck is available in blue or black colors and features the silver chamfered edging which highlight an innovative design.
Features:
- JConcepts design and function
- Fits wide range for modified, 27-36T in 48 pitch
- Protective design, aluminium material
- Laser etched labeling and sizing
- Recess for component storage
- Silver chamfered edging throughout
- Available in blue or black anodized finish
The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring 1/8 scale nitro Truggy to and from the pits, with straps optimized for truggy use.
Truggy tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your arm while you’re balancing the truck atop the starter box. Not to mention, the fumes that smack you in the face with every rev of the engine. ProTek R/C’s Starter Box Carrying Bag allows you to comfortably carry your nitro truggy at your side when moving in and out of pit row. The Carrying Bag also frees up your other hand while putting the weight of the truggy and starter box much lower in a more natural position - your arm will thank you!
The all canvas Starter Box Carrying Bag features an interior liner and two handle straps designed not to interfere with truggy tires. The front straps are also attached close to the corner to stay clear of the pipe stinger. Inside the bag, the liner is fuel resistant and easily cleans up when things get messy.
The carrying bag will accommodate most popular starter boxes including: ProTek R/C SureStart, OFNA 1/10 & 1/8 starter boxes, Mugen Seiki Pro Starter BIII, LRP 1/10 & 1/8 Spec 2, Hudy “Star-Box”, Team Associated Compact 1/10 & 1/8 starter boxes and Team Losi 8IGHT & 8IGHT-T starter boxes. Make it easy on your pit guy and grab a ProTek R/C Starter Box Carrying Bag.
Features:
- Durable, heavy-duty bag material
- Dual handles won't interfere with tires
- Safe, one handed pit operation
- Straps optimized for truggy use
- No fumes in your face
- Compatible with boxes up to 14cm wide x 36.8cm long
- Made in the USA
Compatible Starter Boxes:
PTK-4500: ProTek R/C "SureStart"
TLR99059: TLR 8IGHT/8IGHT-T
HUD104500: Hudy "Star-Box"
OFN10244: OFNA Truggy Box
OFN10245: OFNA 1/10 & 1/8
LRP37101: LRP 1/10 & 1/8 Spec 2
MUGB0237: Mugen Pro Starter BIII
ASC1751: Team Associated Compact 1/10 & 1/8
NOTE: Truggy in pictures is for display purposes only and is not included.
Package includes:
- 4 x Shock Teflon Piston (1 hole)
- 4 x Shock Teflon Piston (2 holes)
- 4 x Shock Teflon Piston (3 holes)
- 4 x Teflon Shaft Guide
- 4 x Titanium Coated Shock Shaft
- 10 x M3 E-Clip
Specifications:
- Type: LiPo
- Capacity: 600mAh
- Voltage: 7.4V
- Discharge Rate: 20C
- Connector Type: EC3
- Number of Cells: 2
- Application: SprintJet
This EVO version now includes their new CPD Slipper Pads (Consistent Power Delivery), which is recommended for the majority of conditions.
The Triad Evo is greater than ever with new self-centering Evo plates that are designed to allow the clutch to transmit power, yet maintain a degree of slip without overheating.
Highlights:
- Smoother throttle/brake feel in jumps as well as turns
- Consistent performance (jumps are the same every lap)
- Light weight, compact design (TRIAD 11.2g Vs. Stock 16.4g)
- (NEW) 3 self-centering plates, vented for weight and cooling.
- Longer life with less maintenance
Higher roll center helps to increase on power traction and is recommended in low traction conditions. High roll center is also recommended to avoid traction rolling at corner entry.
Package includes:
- 1x high roll center 3° rear/rear block
- 1x Rear/front left block
- 1x Rear/front right blocks
NOTE: Use with the TLR HRC Anti-Squat Tuning Set (TLR234019).
These tires have been pre-mounted and glued, with foam inserts installed.
Features:
- EC3 Plug
- Quality 16Awg Silicone Lead
- Fits 1/18 Scale ECX Kits
The 140x75mm Aluminium Parts Tray features 4 cavities in a small footprint design focused for easy placement anywhere in your pit area.
Specifications:
- Features 4 cavities at 140x75mm
- Aluminium black anodized with silver highlights
- Internal rounded edges for easy part removal
- Avid logo laser etched at each end
- Includes 4 rubber feet, and 1 small Avid decal
Does not fit the 8ight-X models
Key Features:
- High-durability aluminium allows inserts to be used for the life of the vehicle
- Hard anodized to improve durability and be resistant against scratching
- Left- and right-side inserts key into gear box to disallow any rotation of the inserts that can cause drivetrain failure
- Laser-etching identification designates inserts for 2.0 gear boxes only
- .1 and .25mm shims included for differential shimming
Has less binding than CV driveshaft to allow the suspension to work better on rough tracks
These shoes last a long time, and you can fine tune the way the clutch engages by trimming about 1-2mm of the end of the clutch shoes, or by using different clutch springs.
Package includes:
- 3 x clutch shoes
- 1 x washer
The Kyosho high grade air filter features a new, high-density foam element and pre-filter. The high-density foam captures the smallest particles to keep your engine in top condition, yet it allows plenty of airflow so the engine can produce maximum power.
The angular cut of the Kyosho high grade air filter foam pre-filter creates more surface area, which means the engine will breathe well even when other filters begin to compromise performance.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles. The Ti-Carbonitride coating has proven to be a very smooth and even more reliable than Ti-Nitride.
Ti-Carbonitride coating is used on the front and rear inner hinge pins, threaded kingpins, and threaded outer rear hinge pins.
Package includes:
- 2x front inner hinge pins
- 2x rear inner hinge pins
- 2x threaded kingpins
- 2x threaded outer rear hinge pins
These are the replacement 22 3.0 front hinge pins and king pins, but are compatible with the entire 22 series of 1/10 2wd vehicles.
Package includes:
- 2x hinge pins
- 2x king pins
- 2x lock nuts
Included in Packet:
- 8x skid plates
- installation hardware
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
These tires feature the industry standard AKA Red Closed Cell Inserts, and are intended for use with Team Associated, TLR/Losi and Kyosho 1/10 2WD and 4WD buggies that use a 12mm hex rear wheel.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
This is a #5 "Hot" Platinum Turbo Glow Plug from Dynamite.
This is a #4 "Extra Hot" Platinum Turbo Glow Plug from Dynamite.