Special Offers
VBC Racing Side Spring Adjuster: Flash-04 (VBC A-03-VBC-1028)
This is a packet of (2) of Red Side Spring Adjuster from VBC Racing for their Flash-04 kits.
Hard anodized in Red
VBC Racing Titanium Coated King Pin: LightningF (VBC C-02-VBC-5135)
This is a packet of (2) Titanium Coated King Pins from VBC Racing for their LightningF Car kits.
Fits LightningF Fi Car
VBC Racing TBB Oil Sealer Cap Set: WildFire (VBC D-05-VBC-0095)
This is a Shock Sealer Caps from VBC Racing for their WildFire Touring Car kits.
These sealer caps are option parts for VBC TBB shocks and Xray T4 shocks
Package includes:
These sealer caps are option parts for VBC TBB shocks and Xray T4 shocks
Package includes:
- 4 x TBB Oil Sealer Cap (Clear-Soft)
- 4 x TBB Oil Sealer Cap (Black-Medium Soft)
- 4 x TBB Oil Sealer Cap (Blue-Medium Hard)
- 4 x TBB Oil Sealer Cap (Pink-Hard)
Fits VBC TBB shocks and Xray T4 shocks
VBC Racing Steering Rack Stiffener Post: WildFire D07 (VBC D-05-VBC-0172)
This is a Steering Rack Stiffener Post from VBC Racing for their WildFire D07 Touring Car kits.
Designed for the WildFire D07
Team Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing (4) (LOSA6948)
This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm Flanged Bearings
Four 8x14x4mm flanged bearings
Team Losi Racing Machined Shock Bushing Set: 22/T/SCT (TLR233006)
This is a Machined Shock Bushing Set from Team Losi Racing compatible with all 22, 22T and 22SCT vehicles.
These lower cartridge bushings are machined for a more precise fit, and for the best results should be used with the x-ring o-rings included with the TLR233005 seal set.
These lower cartridge bushings are machined for a more precise fit, and for the best results should be used with the x-ring o-rings included with the TLR233005 seal set.
Fits most of the 22 series of 1/10 vehicles
Kyosho 2nd Spur Gear (46T): FW-06 (KYO KP VS008B)
This is a 46Tooth 2nd Spur Gear from Kyosho to fit their On-Road FW-06 race car.
Fits the Kyosho FW-06
Hong Nor 1/8 Off-Road Wing (Blue) (J52-DB)
This is a 1/8 Blue Buggy Wing from Hong Nor.
major discount
VBC Racing Ball Connectors (10) (VBC B-02-VBC-0045)
This is a packet of (10) Ball Connectors from VBC Racing for their WildFire Touring Cars.
Packet of 10 Ball Connectors
VBC Racing Ball Connector (5mm Length) (5) (VBC B-02-VBC-3036)
This is a packet of (5) 5mm Length Ball Connector from VBC Racing.
5mm Ball Connectors
VBC Racing Spur Gear (64p) (116T) (VBC D-05-VBC-0040)
This is a 116T 64P Spur Gear from VBC Racing.
Always replace worn spur gears for efficiency
Team Losi 5x11x4mm Rubber Sealed Ball Bearing (4) (LOSA6947)
This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 5x11x4mm bearings
Four 5x11x4mm bearings
Agama Brake Disk (CNC) (2): A8 / A8T / A215 (AGM 9009)
This is a packet of (2) Brake Disk (CNC) from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Kyosho Receiver Box Set: MP9 TKI3 (KYO KP IF479)
This is a Receiver Box Set from Kyosho for their MP9 TKI3 1/8 Scale Buggy Kit.
Replacement Receiver box
Kyosho 3.5mm (63mm) Rear Shock Shaft (2): MP7/MP777/MP9/MP10/STR (KYO KP IFW149-02)
This is a packet of (2) 3.5mm Rear Shock Shaft from Kyosho included in most of their 1/8 buggy kits.
These shock shafts are 63mm long
Xtreme Racing Carbon Fiber Center Diff Top Plate: Kyosho MP9
This is a optional Carbon Fiber Center Differential Top Plate from Xtreme Racing and is intended for use with the Kyosho MP9.
Add a little bling to your MP9
Team Losi Racing Rear Outer Hinge Pin Brace (3T/3A): 8ight & 8ight-T 2.0 (LOSA1749)
This is a 3T/3A Rear Outer Hinge Pin Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0.
This brace is set for 3 degrees of toe-in and 3 degrees of anti-squat.
By adjusting the amount of rear toe on your buggy, you can fine tune the amount of straight line traction that your buggy has.
This brace is set for 3 degrees of toe-in and 3 degrees of anti-squat.
By adjusting the amount of rear toe on your buggy, you can fine tune the amount of straight line traction that your buggy has.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
AKA Racing 1/10 "EVO" TYPO 2.4" Front 2WD Buggy Tires (2) (Soft) (Red Inserts) (AKA 13220SR)
This is a packet of (2) 1/10 Soft "EVO" TYPO Front 2WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 2WD front wheels.
Features:
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 2WD front wheels.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
These tires are only compatible with AKA EVO 2WD front wheels.
AKA Racing 1/10 "EVO" TYPO 2.4" Front 4WD Buggy Tires (2) (SuperSoft) (Red Inserts) (AKA 13320VR)
This is a packet of (2) 1/10 SuperSoft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
These tires are only compatible with AKA EVO 4WD front wheels.
AKA Racing 1/10 "EVO" TYPO 2.4" Front 4WD Buggy Tires (2) (Soft) (Red Inserts) (AKA 13320SR)
This is a packet of (2) 1/10 Soft "EVO" TYPO Front 4WD Buggy Tires from AKA Racing and include Red (Soft) Inserts.
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
The TYPO is a very low tread pattern that has been optimized for hard-packed indoor tracks. The carcass features the 1/8 scale EVO bead, combined with a refined tread profile.
NOTE: These tires are only compatible with AKA EVO 4WD front wheels.
Features:
- EVO Bead: The EVO bead design uses an 1/8 scale style L-shaped bead mount. This allows the user to glue the tire to the wheel more effectively, creating a much stronger glue bond.
- EVO Wheel: The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel.
- Red Insert (Soft):The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.
- Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
- Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
- Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
- Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
- Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.
These tires are only compatible with AKA EVO 4WD front wheels.
Team Losi Racing Rear HRC Anti-Squat Tuning Set: 22-4 (TLR234019)
This is a HRC Anti-Squat Tuning Set from Team Losi Racing for their 22-4 4WD racing buggies.
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR HRC Pivot Set (TLR234017).
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR HRC Pivot Set (TLR234017).
22-4 Anti-Squat Tuning Set
Team Losi Racing Gear Differential Seal Set: 22-4 (TLR232048)
This is a Gear Differential Seal Set from Team Losi Racing for their 22-4 2.0 buggies. Includes enough to rebuild 2 differentials.
Package includes:
4x O-rings
2x Gaskets
4x washers
8x Screws
Package includes:
4x O-rings
2x Gaskets
4x washers
8x Screws
Time for diff maintenance?
Team Losi Racing Rear LRC Anti-Squat Tuning Set: 22-4 (TLR234018)
This is a LRC Anti-Squat Tuning Set from Team Losi Racing for their 22-4 4WD racing buggies.
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR LRC Pivot Set (TLR234016).
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR LRC Pivot Set (TLR234016).
22-4 LRC Anti-Squat Tuning Set
Team Losi Racing Servo Mount & Steering Horn Set: 22-4 & 22-4 2.0 (TLR234024)
This is a Servo Mount & Steering Horn Set from Team Losi Racing for their 22-4 & 22-4 2.0 4WD racing buggies.
Package includes:
- 1x 23T servo horns
- 1x 24T servo horns
- 1x 25T servo horns
- 1x A steering horns
- 1x B steering horns
- 1x 93mm turnbuckle
- 2x rod ends
22-4 Servo Mount & Steering Horn
Team Losi Racing Front & Rear Hub Set: 22-4 (TLR234015)
This is a Front & Rear Hub Set from Team Losi Racing for their 22-4 4WD racing buggies.
22-4 Front & Rear Hub Set
Team Losi Racing One-Way/Clicker Set: 22-4 (TLR232023)
This is a One-Way/Clicker Set from Team Losi Racing for their 22-4 4WD racing buggies.
Package includes:
- parts required to build the unit as a one way
- parts required to build the unit as full time 4wd assembly
- parts required to build the unit as a "clicker" assembly
22-4 One-Way/Clicker Set
Team Losi Racing Slipper Plate Set: 22-4 (TLR232021)
This is a Slipper Plate Set from Team Losi Racing for their 22-4 4WD racing buggies.
Package includes:
- 1x inner slipper plate
- 1x outer slipper plate
22-4 Slipper Plate Set
Team Losi Racing Front Spindle Set: 22, 22T & 22SCT 2.0 (TLR234074)
This is a Front Spindle Set from Team Losi Racing for almost all of their 22, 22T & 22SCT race kits.
These adjustable front spindles give racers the ability to tune Ackermann, trail, and roll center without the need to purchase additional parts of spindles.
Trail can be adjusted to 2mm, 3mm and 4mm settings. Included are two different Ackermann settings, #1 and #3 inserts, while #2 inserts have the same setting as #1 with ability to remove bump out when running the spindles full up.
The spindles allow racers to raise the front axle an additional 2mm when compared to previous 22 spindles.
These adjustable front spindles give racers the ability to tune Ackermann, trail, and roll center without the need to purchase additional parts of spindles.
Trail can be adjusted to 2mm, 3mm and 4mm settings. Included are two different Ackermann settings, #1 and #3 inserts, while #2 inserts have the same setting as #1 with ability to remove bump out when running the spindles full up.
The spindles allow racers to raise the front axle an additional 2mm when compared to previous 22 spindles.
Tune Ackermann, trail, and roll center
Out of Stock
$10.00 Inc Tax
$19.95
Team Losi Racing Front Arm Set: 22 (TLR1050)
This is a Front Arm Set from Team Losi Racing for their original TLR 22 buggy race kits.
Fits the original TLR 22 Buggy
Team Losi Racing Front Spindle & Rear Hub Set: 22, 22T & 22SCT 2.0 (TLR234007)
This is a Front Spindle & Rear Hub Set from Team Losi Racing for most of their 22 2.0, 22T 2.0 & 22SCT 2.0 race kits.
This can also be used as an optional upgrade for the first generation 22 vehicles.
Package includes:
Note: When the spindles are used with the updated caster blocks (TLR234006 - Not Included), they provide less scrub off-set, 4mm of trail with an updated outer camber link location to transform the handling. This helps to deliver a much more balanced feel, front to rear, that makes the vehicle easier to drive and more consistent.
This can also be used as an optional upgrade for the first generation 22 vehicles.
Package includes:
- 1x right side spindle
- 1x left side spindle
- 2x rear hubs
Note: When the spindles are used with the updated caster blocks (TLR234006 - Not Included), they provide less scrub off-set, 4mm of trail with an updated outer camber link location to transform the handling. This helps to deliver a much more balanced feel, front to rear, that makes the vehicle easier to drive and more consistent.
Tune Ackermann, trail, and roll center
Out of Stock
$10.00 Inc Tax
$14.95
Team Losi Racing 12mm Shock End & Spring Cup Set: 22/T/SCT/22-4 (TLR5095)
This is a 12mm Shock End & Spring Cup Set from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.
Package includes:
Package includes:
- 4x Shock ends
- 4x spring cups
- 4x mounting balls
Fits most of the TLR 22 Buggies and Trucks
Team Losi Racing 3.5x48mm TiCN Front Shock Shaft (2): 22 SCT (TLR233001)
This is a packet of (2) 3.5x48mm TiCN Front Shock Shaft from Team Losi Racing for the 22 SCT racing Short Course Truck.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
22 SCT Front Shock Shaft
Team Losi Racing 3.5x44mm TiCN Front Shock Shafts (2): 22 & 22-4 2.0 (TLR233000)
This is a packet of (2) 3.5x44mm TiCN Front Shock Shaft from Team Losi Racing for the 22 and 22-4 2.0 racing buggies.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Common TLR Front Shock Shaft
Team Losi Racing 3.5x57.5mm TiCN Rear Shock Shafts (2): 22SCT (TLR233004)
This is a packet of (2) 3.5x52mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 SCT racing Trucks
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of SCT Trucks
Team Losi Racing 3.5x50mm TiCN Shock Shafts (2): 22, 22T & 22SCT (TLR233002)
This is a packet of (2) 3.5x50mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 racing buggies. These are also used as front shock shafts on the TLR 22T and 22SCT Racing Trucks
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of 2wd Buggies & Front of Trucks
Out of Stock
$10.00 Inc Tax
$14.50
Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) (TLR233008)
This is a packet of (4) (1.5x2) 12mm CNC Machined Shock Piston from Team Losi Racing.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
Fits most of the 22 series of 1/10 vehicles
Team Losi Clutch Bearing Set (LOSA6949)
This is the replacement clutch bearing set for the Losi 8IGHT buggy.
This set includes:- One 5x10x4mm bearing
- One 5x13x4mm bearing
(5x13x4mm & 5x10x4mm)
VBC Racing Graphite Bumper Top Plate with MyLaps Mount: WildFire (VBC A-01-VBC-0029-1)
This is a Graphite Bumper Top Plate with MyLaps Mount from VBC Racing
Mounts PT as far forward as possible
Yeah Racing Aluminium Motor Heatsink (380) (Blue) (YR YA-0132BU)
Fits a 380 size motor
Agama CNC Engine Mount: A8 / A8T / A215 (AGM 7206)
This is a CNC Engine Mount from Agama for their 1/8 A8 & A215 Buggy and 1/8 A8T Truggy Kit Vehicles.
These have also been used on Kyosho MP9 Kits to raise the engine and reduce the flame-out caused by the clutch bell hitting the chassis under hard landings.
These have also been used on Kyosho MP9 Kits to raise the engine and reduce the flame-out caused by the clutch bell hitting the chassis under hard landings.
Also fits the Kyosho MP9
Team Losi Racing Battery Cover Heat Shield: 5IVE B (TLR251009)
This is a Battery Cover Heat Shield from Team Losi Racing for their 5IVE B.
Heavily discounted
Agama Hinge Pins (4mm)(4): A8 / A8T / A215 (AGM 8227)
This is a packet of (4) 4mm Hinge Pins from Agama for their A8, A215 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Rear Uprights: A8/ A8T/A215T (AGM 1010)
This is a Rear Uprights from Agama for their A8 Buggy and A8T, A215T Truggies.
Replace old, worn, damaged parts
Agama Cup Joint (Center): A8 / A8T (AGM 8228)
This is a Center Cup Joint from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Differential Outdrives (2): A8 / A8T (AGM 8219)
This is a packet of (2) Differential Outdrives from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Buggy Front Lower Arms: A8 (AGM 1002)
This is a pair of Front lower arms from Agama for their A8 Buggy.
Replace old damaged or bent arms
Agama Buggy Rear Lower Arms: A8 (AGM 1003)
This is a pair of Rear lower arms from Agama for their A8 Buggy.
Replace old damaged or bent arms
Agama Rear Gear Box Case: A8 / A8T (AGM 1005)
This is a Rear Gear Box Case from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Agama Front Spindle Carriers: A8 / A8T (AGM 1111)
This is a packet of (2) Front Spindle Carriers from Agama for their A8 Buggy and A8T Truggy.
Replace old, worn, damaged parts
Team Losi Racing 8.8mm Suspension Balls: 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA6049)
This is a packet of (4) 8.8mm Suspension Balls from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits most TLR 1/8 vehicles