Tamiya Electric Kits

Sort By:  
The Iconic Toyota Hilux Pick-Up (RN36)
Out of Stock
$1,150.00  Inc Tax
Ultimate 6 wheel drive monster
$499.95  Inc Tax
Own your own Mercedes-Benz
Out of Stock
$424.95  Inc Tax
Re-release of an absolute classic
Out of Stock
$374.95  Inc Tax
Re-release of an absolute classic
Out of Stock
$374.95  Inc Tax
Latest Beetle Design from Tamiya
Out of Stock
$365.00  Inc Tax
King of the School Route
Out of Stock
$315.00  Inc Tax
Another R/C classic,The Subaru BRAT!
Out of Stock
$299.95  Inc Tax
Part of the new Comical Range
$299.95  Inc Tax
Limited "Metallic Special" Kitset
$299.95  Inc Tax
The return of the Frog!
Out of Stock
$295.00  Inc Tax
Dominate the Dirt with 6-Wheel Drive
Out of Stock
$285.00  Inc Tax
Another one of Tamiya's classic's
Out of Stock
$274.95  Inc Tax
Limited "Black Edition" Kitset
Out of Stock
$274.95  Inc Tax
Another amazing rare classic
Out of Stock
$274.95  Inc Tax
Entry Level 4wd Racing Kitset
Out of Stock
$249.95  Inc Tax
Entry Level 4wd Racing Kitset
Out of Stock
$249.95  Inc Tax
Part of the new Comical Range
Out of Stock
$249.95  Inc Tax
Tamiya 1/10 R/C Toyota Bruiser Kit (TAM 58519)
This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism. Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance.

About the Toyota Hilux Pick-Up
The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day.

Features:
  • Equipped with metal front under guard. Knuckle mechanism is just like that on an actual truck.
  • Highly-durable front & rear die-cast metal wheel hubs.
  • A planetary gear ensures optimum ratios while a metal dog clutch, shift forks, and plastic gears combine to deliver smooth gear changes.
  • Durable, lightweight die-cast aluminium front/rear axle housings are equipped with differentials.
  • Power is delivered from the transmission to the front wheels via universal drive shaft.
  • An abundance of metal parts is incorporated for a high level of realism.

Specifications:
Length:525mm
Width: 278mm
Height: 275mm
Weight: 3.2kg
Wheelbase:287mm
Tread: 200mm (Front), 218mm (Rear)
Tire Width/Diameter (F/R):60/123mm
Transmission type:Longitudinally-Mounted Motor Shaft-Driven 4WD
Differential type:Front & Rear 6-Pinion Differential Gears
Damper:Front & Rear Oil Dampers
Gear Ratio:1st Gear=1:54.63 (4WD)
2nd Gear=1:40.49 (2WD)
3rd Gear=1:27.92 (2WD)
Motor:Type 540 motor (included) 


Required Items (Sold Separately)
  • 4-Channel radio system
  • Servo
  • Electronic Speed Controller
  • 540 Motor
  • Battery
  • Charger
  • Paint
  • AA Batteries for Transmitter

The Iconic Toyota Hilux Pick-Up (RN36)
Out of Stock
$1,150.00  Inc Tax
Tamiya 1/24 R/C Volvo A60H Hauler 6x6 (G6-01) (TAM 58676)
Power Hauler
Volvo's impressive and varied vehicle line-up is home to a highly successful range of working vehicles that includes haulers for heavyweight work in mines, quarries and the like, among them the A60H that was announced at the bauma 2016 show in Munich. This R/C model assembly kit depicts the A60H with a polycarbonate cab section capturing the hauler's distinctive lines, and a sturdy bed molded in ABS plastic. Stickers are included to recreate details such as front grille, air inlets flanking the hood, headlights, logos and more.

Fun, Innovative & Great Performance!
The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers, and yellow deep rim wheels are paired with chunky 113mm tires. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

Features:
  • The rear bed is molded in the same yellow as the chassis, perfect for this depiction of a construction vehicle!
  • The lightweight polycarbonate cabin section comes pre-painted in Camel yellow and Gun metal, and cut out, too.
  • A dedicated bumper meshes nicely with the polycarbonate cabin, helping to protect from any major bumps.
  • The G6-01 chassis is based around a slimline monocoque, with a two-piece steering tie-rod for excellent response.
  • 6-wheel double wishbone suspension ensures superior off-road performance in conjunction with 6-wheel drive.
  • The battery pack is inserted longitudinally, and held securely in place by the model's rear bed.

Specifications:
Length:486mm
Width:270mm
Height:210mm
Wheelbase:
173mm + 126mm 
Transmission type:Gear-Driven 6WD
Suspension:6-Wheel Independent Double Wishbone Suspension
Tread:  200mm (Front, Center and Rear)
Tire Width/Diameter:
68mm/113mm
Motor:Type 540 motor (Included) 
Gear Ratio:18.03:1


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Electronic Speed Controller
  • Battery
  • Charger
  • AA Batteries for Transmitter
Ultimate 6 wheel drive monster
$499.95  Inc Tax
Tamiya 1/10 R/C Mercedes-Benz G 500: CC-02 (TAM 58675)
The Mercedes-Benz G Class' heavy duty chassis and distinctive body design have long made it a favorite with consumers, and in 2018 it was endowed with new models including the G 500, powered by a 4-liter V8 twin turbo engine.

This R/C model assembly kit recreates the G 500. Length: 455mm, width: 196mm, height: 207mm. The boxy form is recreated accurately in polycarbonate, with separate molded parts for front grille, side mirrors and spare tire cover. The CC-02 provides a great base for the model, at home on a range of off-road surfaces and even rocky terrain.


Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with matte plated seven-spoke wheels and grippy block pattern tires.

Features:
  • The distinctive boxy lines of the Mercedes-Benz G 500 are recreated in style, molded in lightweight and durable polycarbonate.
  • Metal-plated components are used in the depiction of the front grille and light cases, endowing the model with a further touch of realism.
  • Separately molded side mirror parts accurately recreate their full size counterparts and are finished using paint and stickers.
  • Take a close-up look at the silver color matte plated seven-spoke wheels, which are paired with block pattern tires for super grip.
  • The roof section of the body has a depiction of the sunroof, and masking stickers are included to cover it and other windows when painting.
  • Separately molded in tough polycarbonate-ABS plastic, the spare tire cover features a plated emblem for a highly authentic finish.
  • The ladder frame is modeled upon those employed by full-size cars, and offers excellent rigidity on this 1/10 scale vehicle.
  • Front and rear axle housings are connected to four links arms each, which combine with oil dampers for superlative cushioning.
  • Changing gear layout and using separately-sold pinions of nine other sizes allows a range of twenty gear ratios between 11.09 and 29.28:1.
  • Metal chassis frame sections facilitate exemplary durability, while CVA oil damper ensure that you get the maximum off-road performance.
  • Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.

Specifications:
Length:455mm
Width: 196mm
Height: 207mm
Wheelbase:267mm
Tread: 160mm (Front), 163mm (Rear)
Tire Width/Diameter (F/R):33/90mm
Transmission type:Longitudinally-Mounted Motor Shaft-Driven 4WD
Differential type:3-Bevel Differential Gears
Suspension type:4-Link Rigid Suspension (Front & Rear)
Damper:Front & Rear Oil Dampers
Gear Ratio:17.33:1 (using kit-standard 16T pinion)
Motor:Type 540 motor (included) 

Required Items (Sold Separately)
  • 2-Channel radio system
  • Servo
  • Electronic Speed Controller
  • Battery
  • Charger
  • Paint
  • AA Batteries for Transmitter




Own your own Mercedes-Benz
Out of Stock
$424.95  Inc Tax
Tamiya 1/10 R/C Blackfoot Kitset (2016) (TAM 58633)
Back and Ramblin'!
This re-release version of the Blackfoot assembly kit features a chassis with a number of updates while keeping largely to that used on the original off-road car released in 1986.
It includes a highly realistic ABS body with roll bar and metal plated front grille parts. The kit also comes with colorful marking stickers and a driver figure.

Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable red ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups.
Superlative cushioning and grip are provided by 123mm-diameter, 60mm-width lug pattern tires on yellow wheels. Efficient and durable universal shafts come with rubber boots. A sturdy sealed gearbox protects the differential inside from dust and dirt.

Specifications:
Length:440mm
Width:290mm
Height:270mm
Wheelbase:
247mm 
Transmission type:Rear-Wheel Drive
Suspension:Double Wishbone (Front); Trailing Arm (Rear) 
Tread: Tread: 200mm (Front); 225mm (Rear)
Tire Width/Diameter:
60mm/123mm
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 
Gear Ratio:14.7:1


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

Re-release of an absolute classic
Out of Stock
$374.95  Inc Tax
Tamiya 1/10 R/C Monster Beetle Kitset (2015) (TAM 58618)
Look Who's Back!
This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic customized Beetle body depicted in tough polystyrene resin, with metal-plated parts supplied in the kit to add the finishing touch for handles and headlight frames. A resin driver figure is the icing on top of the cake!

Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable red ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups.
Superlative cushioning and grip are provided by 123mm-diameter, 60mm-width lug pattern tires on yellow wheels. Efficient and durable universal shafts come with rubber boots. A sturdy sealed gearbox protects the differential inside from dust and dirt.

Features:
  • Front double wishbone and rear trailing arm setups are cushioned by high-performance CVA oil dampers.
  • Space frame chassis incorporates a dust cover part to ensure that vital R/C equipment is protected.
  • Universal drive shafts not only boost efficiency; they also minimize the risk of popping out when driving.

Specifications:
Length:410mm
Width:285mm
Height:240mm
Wheelbase:
247mm 
Transmission type:Rear-Wheel Drive
Suspension:Double Wishbone (Front); Trailing Arm (Rear) 
Tread: Tread: 200mm (Front); 225mm (Rear)
Tire Width/Diameter:
58mm/130mm
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 
Gear Ratio:14.7:1


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter


.
Re-release of an absolute classic
Out of Stock
$374.95  Inc Tax
Tamiya 1/14 R/C Monster Beetle Trail (GF-01TR) (TAM 58672)
Trail Beetle
This R/C model assembly kit creates a vehicle which offers an excellent off-road drive. Molded in detailed ABS plastic, its racy body is inspired by customized Volkswagen Beetles, and features exaggerated fenders, a simplified rear end, triple auxiliary lights and more.
Metal-plated parts recreate headlights, auxiliary lights and the rear depiction of the engine. The GF-01TR chassis provides a dynamic off-road drive.

GF-01TR: Awesome Traction
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Reduction gears on each axle slow drive shaft rotation for immense traction, great ground clearance, and the ability to take on tough off-road terrain.
The gearbox is sealed to protect from dust and debris, and integrated into the frame; built-in differential gears provide superb traction and durability with the use of included diff putty.
4-wheel double wishbone suspension utilizes friction dampers, while a 2-piece tie rod steering setup with the servo on the left gives excellent response.
Yellow wheels are fitted with 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. The chassis utilizes a 'square' setup with similar tread and wheelbase lengths.

Features:
  • The Monster Beetle Trail offers immense traction that will take it over all kinds of obstacles.
  • Molded in ABS plastic, the body offers plenty of detail. Metal-plated parts add another layer of realism.
  • The front is adorned with triple auxiliary lamps, which are metal-plated parts with stickers for decoration.
  • The dummy engine and muffler are also metal-plated parts. The body also features a sporty roll bar.
    Use the included putty in the gear differentials to help increase this model with superb traction.
  • All wheels have hub reduction units, which slow down drive shaft output for greater torque.

Specifications:
Length:333mm
Width:270mm
Height:215mm
Wheelbase:
174mm
Transmission type:4WD
Suspension:4-Wheel Independent Double Wishbone Suspension
Tread: 210mm (Front & Rear)
Tire Width/Diameter:
68/115mm (Front & Rear)
Motor:Type 540 motor (Included) 
Gear Ratio:37.35:1 (using kit standard 18T pinion gear)


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Electronic Speed Controller
  • Battery
  • Charger
  • AA Batteries for Transmitter

Latest Beetle Design from Tamiya
Out of Stock
$365.00  Inc Tax
Tamiya 1/10 R/C King Yellow 6x6 (G6-01) (TAM 58653)
Who wouldn't be thrilled about going to school if you could get driven there on a beast like the school bus-inspired King Yellow? This is an R/C model assembly kit which includes a body molded in lightweight yet durable polycarbonate, and great realism thanks to the inclusion of separate parts recreating details such as roof lights and stop sign. The kit also includes stickers for decoration, and masking stickers to help with the paint job. Matte silver color plated deep rim wheels are paired with 113mm diameter tires for great off-road performance.

Fun, Innovative & Great Performance!
The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

Features:
  • This 6-wheel drive monster truck school bus not only looks great, it will be a superb companion in your off-road adventures!
  • Roof lights are recreated by separate parts, and attached with double-sided tape. Red and yellow lenses are depicted using stickers.
  • A sticker enables quick and easy recreation of the screw-attached STOP sign on the left side - an essential for any school bus.
  • Stickers are also used to recreate lightly-tinted window areas with ease, saving time on the painting process.

Specifications:
Length:478mm
Width:270mm
Height:239mm
Wheelbase:
173mm + 126mm 
Transmission type:Gear-Driven 6WD
Suspension:6-Wheel Independent Double Wishbone Suspension
Tread:  200mm (Front, Center and Rear)
Tire Width/Diameter:
68mm/113mm
Motor:Type 540 motor (Included) 
Gear Ratio:18.03:1


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Electronic Speed Controller
  • Battery
  • Charger
  • AA Batteries for Transmitter

King of the School Route
Out of Stock
$315.00  Inc Tax
Tamiya 1/10 R/C Subaru Brat - 2WD Truck (TAM 58384)
Subaru BRAT
The Bi-drive Recreational All-terrain Transporter was created by Subaru in the late 1970's from their earlier 4WD station wagon model for the US market. Powered by a flat-four engine ranging from 1.6 to 1.8 liters in displacement, this pickup had the unique feature of having jump seats welded to the truck bed, which allowed it to be imported as a car instead of a truck. One of the car's more famous owners was former US President Ronald Reagan, whose red BRAT is restored and displayed at his former residence in California.

Model is a High-quality 1/10 R/C assembly kit of the Subaru BRAT, one of Tamiyas early R/C creations
    1. Same 2WD chassis as used for ITEM# 58354 The Frog, with 4-wheel independent suspension and full ball bearings to handle tough off-road driving.
    2. Comes with two body shells, one made of plastic material similar to the original BRAT for a nostalgic feel and one made from durable polycarbonate material (included).
    3. Type 540 motor included.
    4. Electronic Speed Control Unit (TBLE-02S) also included.

Features:
    1. Improved re-release model of the subaru brat, which made its debut in 1983
    2. Lightweight and durable abs space frame
    3. Four wheel independent suspension
    4. Differential gear for smooth cornering
    5. Includes both realistic resin and lightweight polycarbonate bodies
    6. Requires a 7.2V running battery (not included)
    7. Requires a 2ch. radio control system
    8. Model may vary from image on box
    9. Use Tamiya color for painting resin body and Tamiya polycarbonate color for polycarbonate body (paint not included)

Required Items (Sold Separately)
    1. Transmitter/Receiver
    2. Servo
    3. Battery
    4. Charger
    5. AA Batteries for Transmitter
    6. Paint


Another R/C classic,The Subaru BRAT!
Out of Stock
$299.95  Inc Tax
Tamiya 1/10 Comical Frog (WR-02CB) (TAM 58673)
Revvit, revvit
First introduced in 1983, The Frog 2WD racing buggy made a huge splash with its eye-catching design and top-drawer performance, plus a single seater buggy-inspired body that drips realism.

The legend continues with the Comical Frog, which features a new stylized body, bubble tires and exciting chassis that offers hours of fun. This R/C model assembly kit creates a 2WD buggy, with a lightweight and durable stylized polycarbonate version of The Frog body, and a helmeted driver figure included. Stickers to create model markings are included, as are masking stickers for use during the paint job.

There is plenty to catch the eye in the overall design too, with dual pipe parts giving an antenna motif, and parts depicting megaphone design mufflers. Separately sold LEDs can be installed for a truly awesome model!

    1. A fresh new take on a Tamiya legend - the Comical Frog body is a real eye-catching design in lightweight polycarbonate..
    2. Rear poles and flags, plus rounded tires give the model a unique and bubbly look that just promises plenty of fun driving!
    3. The WR-02CB chassis is based upon the proven WR-02. Hammer on the throttle for thrilling wheelies to impress your friends.
    4. A smooth drive awaits with 4-wheel double wishbone suspension featuring long arms and CVA oil dampers with multiple positions.
    5. The slim monocoque frame features longitudinal battery and central motor, with power transmitted by gears. Gearbox and motor are pre-assembled.
    6. The kit features an assembly type figure with plenty of design options including five different styles of eye stickers.
    7. Floor the throttle and watch the model perform exciting wheelies thanks to the wheelie bar! Megaphone-style mufflers are a stylish design point.
    8. The Comical Frog is compatible with separately-sold 5mm LEDs and light unit, for a lit-up model that will truly look the part.

WR-02CB Chassis - Great Fun Awaits!
The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save hassle in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while underguard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Pink and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive.

Specifications:
Length:356mm
Width:244mm
Height:195mm
Wheelbase:
170mm 
Transmission type:RWD
Suspension:4-Wheel Double Wishbone Suspension
Dampers:Oil Filled Front/Rear CVA
Tread: 189mm (Front), 186mm (Rear)
Tire Width/Diameter:
46/95mm (Front), 56/98mm (Rear)
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 
Gear Ratio:18.3:1 



Part of the new Comical Range
$299.95  Inc Tax
Tamiya 1/12 R/C Midnight Pumpkin 'Metallic Special' Kitset (CW-01) (TAM 58365)
The ever popular 1/12 scale R/C Midnight Pumpkin is now available as a special "Metallic Special" model, featuring a stylish chromed ABS molded body.
The R/C Midnight Pumpkin (first released in 1987) was loved for its camp appearance as much as for its R/C performance. The 1950's style U.S. style pick-up truck body is raised up over the monster truck wheels to ensure that this R/C truck will get attention anywhere you choose to drive it.

2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swing-arms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces.
Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.

Specifications:
Length:385mm
Width:290mm
Height:225mm
Transmission type:rear 2WD
Suspension:Front independent swing axle and rigid axle rear suspension
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

Limited "Metallic Special" Kitset
$299.95  Inc Tax
Tamiya 1/10 Frog "05" Ltd (TAM 58354)
Return of the Frog!
First introduced in 1983, the 2WD racing buggy Frog made a huge splash with its eye-catching design and high performance running. The Frog now makes a comeback, updated for a new age, but with its basic structure essentially unchanged.
Preserving its characteristic space frame, the oil dampers for trailing-arm type rear suspension have been updated to diaphragm type. Rear drive shaft features dogbone type joint for secure power transmission. Sleek polycarbonate body remains the same, while 3-piece wheels feature front grooved and rear spike tires for excellent off-road running.

2wd Chassis Packed with Innovation
Electric R/C racing buggy features ABS space frame and nylon suspension and bumper for a lightweight yet rugged form that is perfect for off road running. Battery is held in ultra-low position, giving this car the stability and weight balance to handle rough terrain and wild jumps. Advanced 4-wheel independent suspension composed of front double wishbone type featuring in-board spring and durable steel radius arm. Rear trailing arm type features horizontally mounted aluminium cylinder oil dampers for effective shock absorbtion. Sealed differential gearbox ensures high speed cornering, while full ball bearings and 3-step gear ratio secures maximum transmission efficiency.

Specifications:
Overall length:410mm
Width:240mm
Height:145mm
Transmission type:rear 2WD
Suspension:Front double wishbone. Rear trailing arm
Tire width/diameter:Front 21/73mm. Rear 51/88mm


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

The return of the Frog!
Out of Stock
$295.00  Inc Tax
Tamiya 1/16 R/C KongHead 6x6 (G6-01) (TAM 58646)
This R/C model assembly kit creates the Konghead 6x6. With its big sleeper cab, flat nose and radiator grille, its polycarbonate body takes inspiration from U.S. trailer heads. Metal-plated air cleaner and muffler parts give an authentic finish. Marking stickers are included to decorate the body with style. The new G6-01 chassis is a newly-designed 6WD unit that can take on slopes of up to 40 degrees. See below for much more information!

Fun, Innovative & Great Performance!
The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

Features:
  • Double wishbone suspension is paired with friction dampers for excellent off-road performance.
  • Smooth handling thanks to the 2-piece steering tie-rod and steering servo positioned on the left.
  • The motor powers three differential gears inside the monocoque, in a gear-driven 6WD setup.

Specifications:
Length:453mm
Width:270mm
Height:234mm
Wheelbase:
173mm + 126mm 
Transmission type:Gear-Driven 6WD
Wheelbase:
170mm
Suspension:6-Wheel Independent Double Wishbone Suspension
Tread:  200mm (Front, Center and Rear)
Tire Width/Diameter:
68mm/113mm
Motor:Type 540 motor (Included) 
Gear Ratio:18.03:1


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Electronic Speed Controller
  • Battery
  • Charger
  • AA Batteries for Transmitter

Dominate the Dirt with 6-Wheel Drive
Out of Stock
$285.00  Inc Tax
Tamiya 1/12 R/C Lunchbox Kitset (CW-01) (TAM 58347)
Grab Your Lunch Box, Let's Go to the Park!
Another one of Tamiya's classic creations, the R/C Lunch Box (First released in 1987) was loved for its original appearance as much as for its R/C performance.
The boxy minivan body has been raised up over monster truck wheels to ensure that this R/C van will grab the attention wherever you choose to drive it. Use the sides of the van as a canvas to paint your own original designs for the ultimate conversation piece!


2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swing-arms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces.
Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.


Specifications:
Length:385mm
Width:290mm
Height:225mm
Transmission type:rear 2WD
Suspension:Front independent swing axle and rigid axle rear suspension
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

Another one of Tamiya's classic's
Out of Stock
$274.95  Inc Tax
Tamiya 1/12 R/C Midnight Pumpkin Kitset (CW-01) (TAM 58547)
The ever popular 1/12 scale R/C Midnight Pumpkin is now available as a special "Black Edition" model, featuring a stylish Black ABS molded body.
The R/C Midnight Pumpkin (first released in 1987) was loved for its camp appearance as much as for its R/C performance. The 1950's style U.S. style pick-up truck body is raised up over the monster truck wheels to ensure that this R/C truck will get attention anywhere you choose to drive it.


2WD Chassis Mounted on Big 115mm Diameter Tires
The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swing-arms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces.
Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.


Specifications:
Length:385mm
Width:290mm
Height:225mm
Transmission type:rear 2WD
Suspension:Front independent swing axle and rigid axle rear suspension
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

Limited "Black Edition" Kitset
Out of Stock
$274.95  Inc Tax
Tamiya 1/10 RC Hornet Kitset (TAM 58336)
The revolutionary 1984 2WD off-road buggy is back and more fun than ever before! The Hornet stands as one of Tamiya's most popular R/C cars ever released, helping launch a 2WD R/C buggy boom worldwide. Featuring excellent performance on both dirt and on-road tracks, this awesome buggy can take on any type of terrain.
Just like the original, this re-release features an easy to assemble chassis and drivetrain consisting of a durable but lightweight ABS resin bathtub frame, diff gear loaded sealed gearbox, oil filled rear dampers, powerful RS 540 motor and high performance suspension system.
The Hornet is perfect for those that used to have one, those that have always wanted one, and for those that want a revolutionary buggy that has earned its place in R/C history.

Specifications:
Length:389mm
Width:223mm
Height:135mm
Transmission type:rear 2WD
Suspension:Front independent swing axle and rigid axle rear suspension
Electronic Speed Controller:TBLE-02S Included: (brushless motor and brushed motor compatible)
Motor:Includes a 380-type motor
A Type 540 motor (sold separately) can also be installed for more power. 
Tires:Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip on dirt surfaces.


Required Items (Sold Separately)
  • Transmitter/Receiver
  • Servo
  • Battery
  • Charger
  • AA Batteries for Transmitter

Another amazing rare classic
Out of Stock
$274.95  Inc Tax
Tamiya 1/10 4WD R/C Plasma Edge (TT-02B) (TAM 58630)
Get an Edge on the Competition
This exciting shaft-driven 4WD R/C buggy assembly kit creates the Plasma Edge II, and includes stylish polycarbonate body and rear wing parts. Marking stickers add to the racy mood of the model, as do fluorescent yellow star dish wheels and white CVA oil shocks. The TT-02B is a dedicated off-road buggy chassis that offers hassle-free assembly and maintenance, as well as superb controllability.

Shaft-Driven 4WD and Superior Handling from the TT-02B
The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while left and right suspension arms and uprights are identical to facilitate hassle-free assembly. Front and rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening four screws, making maintenance a breeze. Four different gear ratios can be applied with the use of three separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.

Specifications:
Length:380mm
Width:250mm
Height:145mm
Wheelbase:
266mm 
Transmission type:Shaft-Driven 4WD
Suspension:4-Wheel Double Wishbone Suspension
Dampers:Oil Filled Front/Rear CVA
Tread: Tread: 217mm (Front), 208mm (Rear)
Tire Width/Diameter:
60mm/123mm
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 
Gear Ratio:10.71:1 (using kit-included pinion gear) 



Entry Level 4wd Racing Kitset
Out of Stock
$249.95  Inc Tax
Tamiya 1/10 4WD R/C Neo Scorcher (TT-02B) (TAM 58568)
Burn through the off-road circuits!
The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals!

Shaft-Driven 4WD and Superior Handling from the TT-02B
The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while left and right suspension arms and uprights are identical to facilitate hassle-free assembly. Front and rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening four screws, making maintenance a breeze. Four different gear ratios can be applied with the use of three separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.

Specifications:
Length:380mm
Width:250mm
Height:145mm
Wheelbase:
266mm 
Transmission type:Shaft-Driven 4WD
Suspension:4-Wheel Double Wishbone Suspension
Dampers:Oil Filled Front/Rear CVA
Tread: Tread: 217mm (Front), 208mm (Rear)
Tire Width/Diameter:
60mm/123mm
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 
Gear Ratio:10.71:1 (using kit-included pinion gear) 



Entry Level 4wd Racing Kitset
Out of Stock
$249.95  Inc Tax
Tamiya 1/10 Comical Grasshopper (WR-02CB) (TAM 58662)
A New Face in the Field!
The Grasshopper is a legend among Tamiya R/C models, a 2WD buggy which debuted in 1984 and proved a huge hit with its single seater-inspired body, plus a simple chassis that responded eagerly to its driver's commands. The legend continued with the Grasshopper II in 1988, and now with this R/C model assembly kit of the new Comical Grasshopper. This R/C model assembly kit creates a 2WD buggy, with a lightweight and durable stylized polycarbonate version of The Grasshopper body. Stickers to create model markings are included, as are masking stickers for use during the paint job. There is plenty to catch the eye in the overall design too, with dual pipe parts giving an antenna motif, and parts depicting megaphone design mufflers. Separately sold LEDs can be installed for a truly awesome model!

    1. A fresh new take on a Tamiya legend - the Comical Grasshopper body is a real eye-catcher in lightweight polycarbonate.
    2. A fresh new take on a Tamiya legend - the Comical Grasshopper body is a real eye-catcher in lightweight polycarbonate.
    3. Rear poles and flags, plus rounded tires give the model a unique and bubbly look that just promises plenty of fun driving!
    4. The WR-02CB chassis is based upon the proven WR-02. Hammer on the throttle for thrilling wheelies to impress your friends.
    5. A smooth drive awaits with 4-wheel double wishbone suspension featuring long arms and CVA oil dampers with multiple positions.
    6. The slim monocoque frame features longitudinal battery and central motor, with power transmitted by gears. Gearbox and motor are pre-assembled.
    7. Side guards are there to protect the model in the event of a spill. The helmeted driver figure gives this model an extra dash of personality.
    8. Floor the throttle and watch the model perform exciting wheelies thanks to the wheelie bar! Megaphone-style mufflers are a stylish design point.
    9. The Comical Grasshopper is compatible with separately-sold 5mm LEDs and light unit, for a lit-up model that will truly look the part.

WR-02CB Chassis - Great Fun Awaits!
The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save hassle in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while underguard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive.

Specifications:
Length:356mm
Width:244mm
Height:195mm
Wheelbase:
170mm 
Transmission type:RWD
Suspension:4-Wheel Double Wishbone Suspension
Dampers:Oil Filled Front/Rear CVA
Tread: 189mm (Front), 186mm (Rear)
Tire Width/Diameter:
46/95mm (Front), 56/98mm (Rear)
Electronic Speed Controller:Included
Motor:Type 540 motor (Included) 
Gear Ratio:18.3:1 



Part of the new Comical Range
Out of Stock
$249.95  Inc Tax
Per Page      1 - 18 of 18
  • 1