1/10 Brushless Motors

Sort By:  
2019 & 2020 NZRCA 4wd Stock Champion
$189.95  Inc Tax
Latest generation ORCA 1/10 racing motor
$189.95  Inc Tax
Latest generation ORCA 1/10 racing motor
Out of Stock
$174.95  Inc Tax
Latest generation ORCA 1/10 racing motor
Out of Stock
$174.95  Inc Tax
On-road Stock Spec Class Motor
Out of Stock
$149.95  Inc Tax
Official Spec motor for the NZRCA M-Chassis Class
Out of Stock
$102.50  Inc Tax
Easily remove motor bearings
$54.95  Inc Tax
Add function and looks while reducing ESC and motor temps
Out of Stock
$39.95  Inc Tax
Add function and looks while reducing ESC and motor temps
Out of Stock
$39.95  Inc Tax
Add function and looks while reducing ESC and motor temps
Out of Stock
$39.95  Inc Tax
Get that edge in Blinky Spec Racing
$34.95  Inc Tax
Keep your 540 motors organised
$28.95  Inc Tax
Gain approx 160kv, 1,350rpm in BLITREME 17.5T
$24.95  Inc Tax
ORCA Blitreme 2 17.5T Sensored Brushless Motor (OCA MO19BTRO175)

ORCA Blitreme 2 EXTREME 17.5T Sensored Brushless Motors


The latest Blitreme 2 motors are time-tested, R&D tested, tracks tested to have definite performance and efficiency improvements over ORCA 1st generation BLITREME sensored brushless motors


▶ R/C Application : On-Roads and Off-Roads
▶ Absolutely the best value with each motor already features special tuned performance right out of the box
▶ Optional rotors available for drivers who would like to upgrade their speed, performance and power band
▶ Optional Ceramic Bearings(sold separately)


Specifications:
▶ New design ORCA Stator
▶ Improved Design Low Resistance Collector Ring
▶ Lower resistance than Blitreme 1
▶ Higher Torque and Top End Speed than Blitreme 1
▶ New Light Weight Design Sensor Board
▶ 12.5mm High Torque Tuned Rotor
▶ 0 - 60 Degree Adjustable Timing
▶ Ultra Low Resistance Design
▶ Ultra Low Resistance Soldering Tabs
▶ New Light Weight Design
▶ Lower Resistance Double Collector Rings for stronger bottom-end to mid-range power band
▶ High strength Neodymium Sintered Magnet
▶ High RPM Precision Bearings
▶ New Design CNC Machined Aluminium Heat Sink Motor Can greatly increases the all around air flow volume and dynamics
▶ CNC Machined Aluminium End Bell

ROAR Approved, which makes this motor NZRCA legal for 17.5 offroad indoor/outdoor racing and RC Superstocks/Stockcars.

2019 & 2020 NZRCA 4wd Stock Champion
$189.95  Inc Tax
REDS Racing VX3 540 Sensored Brushless Motor (17.5T) (REDS MTTE0037)
This is the NEW 17.5T VX3 540 Sensored Brushless Motor from REDS Racing.

VX3 Main Features:
Improved Power and Torque: VX3 Motors internal structure has been improved with a higher quality precision balanced neodymium high-temperature rotor to improve Power and Torque noticeably compared to Gen 2 Motors

Even Lower Internal Resistance: VX3 brushless motors incorporate copper magnetic wires and low resistance collector rings that allow very low internal resistance.

Ultra lightweight:VX3 motors feature precision machined 7075-T6 Aluminum housing with maximized cut-outs and additional openings to make them ultra light.

Improved cooling system: The unique VX3 Housing has been designed to guarantee great heat dissipation and maximize cooling.

Other Features:
- New silver plated solder tabs
- New precision bearings for precise running and longevity
- Precisely adjusted and optimized timing range from 0° to 50°
- Compliant with ROAR (pending), EFRA, IFMAR, BRCA and JMRCA rules
- Available windings: 4.5, 5.5, 6.5, 7.5, 8.5, 10.5, 13.5, 13.5 High Torque, 17.5, 21.5, 25.5

NOTE: Pictures shows a 13.5T however this is a 17.5T

New VX3 Model Motor
$189.95  Inc Tax
ORCA Blitreme 2 13.5T Sensored Brushless Motor (OCA MO19BTRO135)

ORCA Blitreme 2 EXTREME 13.5T Sensored Brushless Motors


The latest Blitreme 2 motors are time-tested, R&D tested, tracks tested to have definite performance and efficiency improvements over ORCA 1st generation BLITREME sensored brushless motors


▶ R/C Application : On-Roads and Off-Roads
▶ Absolutely the best value with each motor already features special tuned performance right out of the box
▶ Optional rotors available for drivers who would like to upgrade their speed, performance and power band
▶ Optional Ceramic Bearings(sold separately)


Specifications:
▶ New design ORCA Stator
▶ Improved Design Low Resistance Collector Ring
▶ Lower resistance than Blitreme 1
▶ Higher Torque and Top End Speed than Blitreme 1
▶ New Light Weight Design Sensor Board
▶ 12.5mm High Torque Tuned Rotor
▶ 0 - 60 Degree Adjustable Timing
▶ Ultra Low Resistance Design
▶ Ultra Low Resistance Soldering Tabs
▶ New Light Weight Design
▶ Lower Resistance Double Collector Rings for stronger bottom-end to mid-range power band
▶ High strength Neodymium Sintered Magnet
▶ High RPM Precision Bearings
▶ New Design CNC Machined Aluminium Heat Sink Motor Can greatly increases the all around air flow volume and dynamics
▶ CNC Machined Aluminium End Bell

ROAR Approved, which makes this motor NZRCA legal for 13.5 On-road Super Stock racing.




Latest generation ORCA 1/10 racing motor
$189.95  Inc Tax
ORCA Blitreme 2 21.5T Sensored Brushless Motor (OCA MO19BTRO215)

ORCA Blitreme 2 EXTREME 21.5T Sensored Brushless Motors


The latest Blitreme 2 motors are time-tested, R&D tested, tracks tested to have definite performance and efficiency improvements over ORCA 1st generation BLITREME sensored brushless motors


▶ R/C Application : On-Roads and Off-Roads
▶ Absolutely the best value with each motor already features special tuned performance right out of the box
▶ Optional rotors available for drivers who would like to upgrade their speed, performance and power band
▶ Optional Ceramic Bearings(sold separately)


Specifications:
▶ New design ORCA Stator
▶ Improved Design Low Resistance Collector Ring
▶ Lower resistance than Blitreme 1
▶ Higher Torque and Top End Speed than Blitreme 1
▶ New Light Weight Design Sensor Board
▶ 12.5mm High Torque Tuned Rotor
▶ 0 - 60 Degree Adjustable Timing
▶ Ultra Low Resistance Design
▶ Ultra Low Resistance Soldering Tabs
▶ New Light Weight Design
▶ Lower Resistance Double Collector Rings for stronger bottom-end to mid-range power band
▶ High strength Neodymium Sintered Magnet
▶ High RPM Precision Bearings
▶ New Design CNC Machined Aluminium Heat Sink Motor Can greatly increases the all around air flow volume and dynamics
▶ CNC Machined Aluminium End Bell

ROAR Approved, which makes this motor NZRCA legal for 21.5 racing.

Latest generation ORCA 1/10 racing motor
Out of Stock
$174.95  Inc Tax
ORCA Blitreme 2 10.5T Sensored Brushless Motor (OCA MO18BT54105)
ORCA Blitreme 2 EXTREME 10.5T Sensored Brushless Motors


The latest Blitreme 2 motors are time-tested, R&D tested, tracks tested to have definite performance and efficiency improvements over ORCA 1st generation BLITREME sensored brushless motors


▶ R/C Application : On-Roads and Off-Roads
▶ Absolutely the best value with each motor already features special tuned performance right out of the box
▶ Optional rotors available for drivers who would like to upgrade their speed, performance and power band
▶ Optional Ceramic Bearings(sold separately)


Specifications:
▶ New design ORCA Stator
▶ Improved Design Low Resistance Collector Ring
▶ Lower resistance than Blitreme 1
▶ Higher Torque and Top End Speed than Blitreme 1
▶ New Light Weight Design Sensor Board
▶ 12.5mm High Torque Tuned Rotor
▶ 0 - 60 Degree Adjustable Timing
▶ Ultra Low Resistance Design
▶ Ultra Low Resistance Soldering Tabs
▶ New Light Weight Design
▶ Lower Resistance Double Collector Rings for stronger bottom-end to mid-range power band
▶ High strength Neodymium Sintered Magnet
▶ High RPM Precision Bearings
▶ New Design CNC Machined Aluminium Heat Sink Motor Can greatly increases the all around air flow volume and dynamics
▶ CNC Machined Aluminium End Bell

Latest generation ORCA 1/10 racing motor
Out of Stock
$174.95  Inc Tax
3Racing BL TaiChi 540 Sensored Brushless Motor (21.5T) (3RAC BMTC-A215S)
This is a 21.5T TaiChi 540 Sensored Brushless Motor from 3Racing.

On-road Stock Spec Class Motor
Out of Stock
$149.95  Inc Tax
Hobbywing JUSTOCK 3650SD 2300KV 17.5T-BLACK-G2.1 Sensored Brushless Motor (HBW 30408011)
This is the JUSTOCK 3650SD 2300KV 17.5T-BLACK-G2.1 Sensored Brushless Motor from Hobbywing.

Features:
  • Fixed timing motor for spec racing
  • Compliant with ROAR and IFMAR rules
  • The use of a heat-resistant magnet attached aluminium case and double insulated windings, high precision bearings, and rotor with a strong structure guarantee outstanding performance and super durability.
  • The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantee the user a smooth and linear power on demand.
  • The silicone O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
  • The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
  • Perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
  • Battery: 2S-3S LiPo
  • 2 POLE
  • 1/10 ,1/12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck /Truck) STOCK / SPORT Race (choose the motor base on competition rules.) Free/casual run for new beginners. Rock Crawler (21.5T, 25.5T only)

Specifications:
  • KV / Turn: 2300kv / 17.5T
  • Ohm: 0.045
  • Current w/o Load Amp: 3.5A
  • Max Power: 157W
  • Max Amp: 47A
  • Weight: 176g
  • Size:
    • Can: Outer diameter 35.9mm / (L): 52.5mm
    • Shaft: diameter 3.17mm / (L) Projecting part: 15mm
  • Rotor: ∅7-12.3-U
Official Spec motor for the NZRCA M-Chassis Class
Out of Stock
$102.50  Inc Tax
ORCA Brushless 540 Motor Bearing Puller & Installer (OCA TOOLS19MBRT)
This is a Bearing Puller & Installer from ORCA for 540 Brushless Motors.

Easily remove motor bearings
$54.95  Inc Tax
ProTek RC 30x30x10mm Aluminium High Speed HV Cooling Fan (Silver/Black) (PTK-2111)
The ProTek RC 30x30x10mm Aluminium High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminium case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminium frame work adds strength to the assembly, helping protect the fan blades in the event of a crash. 

The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).

NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference. 

Features:
  • 30mm aluminium cooling fan
  • Ideal for ESC and motor applications
  • Aluminium casing helps protect the fan blades
  • Compatible with 2S HV LiPo systems (8.75V max)
  • Anodized black with silver chamferred edges
  • Perfect for 1/12, 1/10 and 1/8 scale platforms
  • 2 pin JST connector and included extension for easy installation

Specifications:
Product Model: High Speed HV Cooling Fan
Application: 1/12 - 1/8 Motor & ESC  
Fan Speed: 28,000 RPM
Dimensions (LxWxH) :
 31x31x10.5mm
Mounting Pattern: 24x24mm
Material: Aluminium Case w/Plastic Fan
Weight:  12.5g
Operation Voltage:
 5V - 8.75V
Connector: 2 Pin JST
Current: 0.45A

Add function and looks while reducing ESC and motor temps
Out of Stock
$39.95  Inc Tax
Team Brood Kaze Aluminium HV High Speed Cooling Fan (Blue) (BRO-TBR-KAZEBLUE)

The Team Brood Kaze Aluminium HV High Speed Cooling Fan is a high quality fan option developed for high performance applications. The Kaze features a durable aluminium casing that will help to protect the fan blades in the event of a crash. The aluminium case also helps to dissipate heat, allowing cooler operation of the fan motor at speeds up to 28,000 RPM. The increased heat dissipation also helps to prevent internal parts from expanding and causing failure. 

The fan is compatible with 2S HV LiPo systems (8.75V max), has dual ball bearings, and is pre-wired with a 2 pin connector that can be plugged directly into the receiver or another source of power. Plus, the flat sides of the aluminium case make it easy to secure the fan directly to the chassis with double side tape, or by using the optional Brood Machined Aluminium Fan Mount (not included - BRO-TBR-CNCFANCMOUNT). With all these features combined, this fan is an excellent choice for ESC and motor applications ranging from 1/12 to 1/8 scale.

NOTE: For optimal performance, the fan should be installed at least 5mm away from the motor to prevent magnet interference and to allow sufficient air flow.


Features:
  • 30mm aluminium cooling fan
  • Ideal for ESC and motor applications
  • Aluminium casing helps protect the fan blades
  • Compatible with 2S HV LiPo systems (8.75V max)
  • Anodized black with silver chamferred edges
  • Perfect for 1/12, 1/10 and 1/8 scale platforms
  • 2 pin connector for easy installation

Specifications:
Product Model: High Speed HV Cooling Fan
Application: 1/10 Scale, 1/8 Scale or 1/12 Scale
Fan Speed: 28,000 RPM @ 8.4 Volts
Dimensions (LxWxH) :
 31x31x10.5mm
Mounting Pattern: 24x24mm
Material: Aluminium Case w/Plastic Fan
Weight:  14g
Operation Voltage:
 5V - 8.75V
Connector:JWT 2-Pin
Current: 0.45A
Add function and looks while reducing ESC and motor temps
Out of Stock
$39.95  Inc Tax
Team Brood Kaze Aluminium HV High Speed Cooling Fan (Red) (BRO-TBR-KAZERED)

The Team Brood Kaze Aluminium HV High Speed Cooling Fan is a high quality fan option developed for high performance applications. The Kaze features a durable aluminium casing that will help to protect the fan blades in the event of a crash. The aluminium case also helps to dissipate heat, allowing cooler operation of the fan motor at speeds up to 28,000 RPM. The increased heat dissipation also helps to prevent internal parts from expanding and causing failure. 

The fan is compatible with 2S HV LiPo systems (8.75V max), has dual ball bearings, and is pre-wired with a 2 pin connector that can be plugged directly into the receiver or another source of power. Plus, the flat sides of the aluminium case make it easy to secure the fan directly to the chassis with double side tape. With all these features combined, this fan is an excellent choice for ESC and motor applications ranging from 1/12 to 1/8 scale.

NOTE: For optimal performance, the fan should be installed at least 5mm away from the motor to prevent magnet interference and to allow sufficient air flow.


Features:
  • 30mm aluminium cooling fan
  • Ideal for ESC and motor applications
  • Aluminium casing helps protect the fan blades
  • Compatible with 2S HV LiPo systems (8.75V max)
  • Anodized black with silver chamferred edges
  • Perfect for 1/12, 1/10 and 1/8 scale platforms
  • 2 pin connector for easy installation

Specifications:
Product Model: High Speed HV Cooling Fan
Application: 1/10 Scale, 1/8 Scale or 1/12 Scale
Fan Speed: 28,000 RPM @ 8.4 Volts
Dimensions (LxWxH) :
 31x31x10.5mm
Mounting Pattern: 24x24mm
Material: Aluminium Case w/Plastic Fan
Weight:  14g
Operation Voltage:
 5V - 8.75V
Connector:JWT 2-Pin
Current: 0.45A
Add function and looks while reducing ESC and motor temps
Out of Stock
$39.95  Inc Tax
ORCA Super Capacitor (Blinky) (OCA CP19SU9V15F)
This is a Super Capacitor for Electronic Speed Controls from ORCA.

Specifications:
  • Ideal for stock blinky competition
  • 9V
  • 1.5f
  • Not recommended for Modified Applications


Get that edge in Blinky Spec Racing
$34.95  Inc Tax
JConcepts 540 Motor Storage Case with Foam Liner (Black) (JCO 2497-2)
This is the JConcepts Motor or Rotor Storage Case for 540 sized cans.

Being organized is the name of the game. The best organized, best prepared racers are typically the ones reaching for that top step of the podium. JConcepts has reached into their bag of tricks to help racer organization. The motor | rotor box includes plenty of space for assembled motors, individually spaced rotors and a pocket for miscellaneous motor tuning items.

The motor/rotor box has a small footprint which makes it ideal for short trips with minimal amounts of space. Inside the box is roomy enough for three assembled motors and cushioned with high-impact foam that allow the items to lay in a bed like a cradle during rest periods. At the other end, five areas can house rotors and the pocket at the end gives all-important extra storage. The foam insert material has a grabby feel and allows the user to manipulate to grab needed items. The custom built storage box, molded black in color has JConcepts.net logo for authenticity and built-in plastic latch for easy open and close operation.

Note – rotors are extremely magnetic and setting them in the cradle can be tricky. Enter and remove with ease and patience and maintain separation until they are resting in their individual cradles.

Features:
  • Innovative design, durable material
  • Fits, three assembled motors, five rotors
  • Miscellaneous storage pocket
  • High-impact and steady foam cradle
  • Finger tip and grip access
  • Handy, built-in latch


Keep your 540 motors organised
$28.95  Inc Tax
ORCA Non-Magnetic 7075 Aluminium Motor Screw Set (6pcs) for BLITREME/RT/RT-S (OCA OSR3X3RM)

This is a Non-Magnetic 7075 Aluminium Motor Screw Set (6pcs) for BLITREME/RT/RT-S - SILVER

- gain approx 160kv, 1,350rpm in BLITREME 17.5T
- 65% lighter
- quicker motor response

The ORCA 7075 Aluminium motor screw is a direct replacement for the stock steel screws.

The Aluminium screw set reduces weight of the motor assembly by 3.7 grams (5.7g v. 2.0g), improves RPM and motor response by reducing the magnetic field of the stock steel screws.

Includes (3) 7075 aluminium main motor assembly long screws and (3) 7075 aluminium timing screws.

Gain approx 160kv, 1,350rpm in BLITREME 17.5T
$24.95  Inc Tax
Per Page      1 - 14 of 14
  • 1