AKA Racing

Sort By:  
Perfect for the cold days at the track to keep you warm in style!
$69.95  Inc Tax
Forgiving tread suitable for loose dirt surfaces
$60.00  Inc Tax
Forgiving tread suitable for loose dirt surfaces
$60.00  Inc Tax
A "must have" in your tire collection
Out of Stock
$60.00  Inc Tax
A "must have" in your tire collection
Out of Stock
$60.00  Inc Tax
For hard packed and or tracks with little dust
$60.00  Inc Tax
For hard packed and or tracks with little dust
$60.00  Inc Tax
Balance most 12mm hex and 17mm hex wheels
Out of Stock
$49.95  Inc Tax
For hard packed and or tracks with little dust
$45.00  Inc Tax
Forgiving Tread suitable for Loose Dirt Surfaces
Out of Stock
$45.00  Inc Tax
Forgiving Tread suitable for Loose Dirt Surfaces
$45.00  Inc Tax
Larger lugs for increased tread life
$45.00  Inc Tax
very stable and predictable tread
Out of Stock
$45.00  Inc Tax
For hard packed and or tracks with little dust
Out of Stock
$45.00  Inc Tax
Ideal for hard packed/medium loamy conditions.
$45.00  Inc Tax
Ideal for hard packed/medium loamy conditions.
$45.00  Inc Tax
Optimized for hard-packed low dust, grooved tracks.
$45.00  Inc Tax
Optimized for hard-packed low dust, grooved tracks.
$45.00  Inc Tax
low-profile tread for speed, stability and traction on hard-packed surface.
Out of Stock
$45.00  Inc Tax
low-profile tread for speed, stability and traction on hard-packed surface.
Out of Stock
$45.00  Inc Tax
Balance of long life and traction on dusty abrasive tracks
$45.00  Inc Tax
Balance of long life and traction on dusty abrasive tracks
$45.00  Inc Tax
Designed with durability and stability in mind
$45.00  Inc Tax
Designed with durability and stability in mind
$45.00  Inc Tax
Ideal for hard packed tracks with a dusty surface
$45.00  Inc Tax
Ideal for hard packed tracks with a dusty surface
$45.00  Inc Tax
Works very well on low dust, grooved up tracks.
$45.00  Inc Tax
Works very well on low dust, grooved up tracks.
$45.00  Inc Tax
Fits between the GridIron II and the Impact
Out of Stock
$45.00  Inc Tax
A "must have" in your Tire Collection
$45.00  Inc Tax
AKA Racing Black Sweatshirt Hoodie (Medium) (AKA 98104M)
This is an AKA Hoodie featuring a large logo on the front and the 3 Diamond design down the outside of the right sleeve, printed on a Hanes 100% cotton heavyweight sweatshirt.

Perfect for the cold days at the track to keep you warm in style!

Perfect for the cold days at the track to keep you warm in style!
$69.95  Inc Tax
AKA Racing 1/8 Truggy EVO I-Beam Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14111VRY)
This is a pair of (2) EVO I-Beam 1/8 Truggy Tires from AKA Racing, pre-mounted on yellow EVO truggy wheels.

The I-BEAM tread design is designed for traditional tracks with a little bit of loose dirt. The larger lugs allow the tire to dig deep for maximum traction when it is needed the most. The center cross split bars give good forward bite and when used on the rear allow the car to rotate better in the turns.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


Forgiving tread suitable for loose dirt surfaces
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO I-Beam Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14111VRW)
This is a pair of (2) EVO I-Beam 1/8 Truggy Tires from AKA Racing, pre-mounted on white EVO truggy wheels.

The I-BEAM tread design is designed for traditional tracks with a little bit of loose dirt. The larger lugs allow the tire to dig deep for maximum traction when it is needed the most. The center cross split bars give good forward bite and when used on the rear allow the car to rotate better in the turns.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


Forgiving tread suitable for loose dirt surfaces
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO CityBlock Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14112VRY)
This is a pair of (2) EVO CityBlock 1/8 Truggy Tires from AKA Racing, pre-mounted on yellow EVO truggy wheels.

The Cityblock was the first pin on block design tire and has sparked a host of copies across the industry. This innovative approach to tread design launched a tire that is unmatched in its versatility. From loose dusty tracks to high bite hard packed tracks the Cityblock will deliver consistent performance and has become the work horse of the AKA tire line. You can't go wrong with a set of these in your tires collection.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


A "must have" in your tire collection
Out of Stock
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO CityBlock Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14112VRW)
This is a pair of (2) EVO CityBlock 1/8 Truggy Tires from AKA Racing, pre-mounted on white EVO truggy wheels.

The Cityblock was the first pin on block design tire and has sparked a host of copies across the industry. This innovative approach to tread design launched a tire that is unmatched in its versatility. From loose dusty tracks to high bite hard packed tracks the Cityblock will deliver consistent performance and has become the work horse of the AKA tire line. You can't go wrong with a set of these in your tires collection.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


A "must have" in your tire collection
Out of Stock
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO Gridiron Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14113VRY)
This is a pair of (2) EVO Gridiron 1/8 Truggy Tires from AKA Racing, pre-mounted on yellow EVO truggy wheels.

The Gridiron tire is designed for tracks that are hard packed and or tracks with little dust. This tire design is a great outdoor or indoor alternative. The square outer pins and bar center pins allow for great traction and long tire life compared to other small pin tires. The EVO version of the Gridiron has been revised with more tread density for better performance and wear characteristics.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


For hard packed and or tracks with little dust
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO Gridiron Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14113VRW)
This is a pair of (2) EVO Gridiron 1/8 Truggy Tires from AKA Racing, pre-mounted on white EVO truggy wheels.

The Gridiron tire is designed for tracks that are hard packed and or tracks with little dust. This tire design is a great outdoor or indoor alternative. The square outer pins and bar center pins allow for great traction and long tire life compared to other small pin tires. The EVO version of the Gridiron has been revised with more tread density for better performance and wear characteristics.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


For hard packed and or tracks with little dust
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO Impact Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14117VRY)
This is a set of two AKA Racing EVO Impact 1/8 Truggy Tires, pre-mounted on yellow EVO wheels. The Impact tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable. This is a pair of (2) EVO Impact 1/8 Truggy Tires from AKA Racing, pre-mounted on yellow EVO truggy wheels.

The Impact tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


A very stable and predictable tread
$60.00  Inc Tax
AKA Racing 1/8 Truggy EVO Impact Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14117VRW)
This is a set of two AKA Racing EVO Impact 1/8 Truggy Tires, pre-mounted on white EVO wheels. The Impact tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable. This is a pair of (2) EVO Impact 1/8 Truggy Tires from AKA Racing, pre-mounted on yellow EVO truggy wheels.

The Impact tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable.

AKA EVO Truggy tires feature the ROAR legal 1:8 Truggy bead design and a redesigned carcass shape that includes internal ribbing. This bead design mimics the 1:8 buggy bead design which will make for easier assembly and a stronger bond between the wheel and the tire. The carcass shape has been refined to take advantage of the bead design. Internal ribbing has been added to minimize tire growth at high RPM and support the tire contact patch during cornering. All this adds up to much improved handling and lower lap times.

EVO Wheel
The EVO Truggy wheel is modeled after the World Championship winning EVO Buggy wheel. The wheel features a convex face to help stiffen the wheel and add additional protection to the outside face. The EVO wheel has been designed with the new ROAR 1:8 Truggy wheel bead. This bead design is much simpler and promotes a stronger bond between the tire and wheel.

The optional internal disk offers two benefits.
    • The first is stiffness. With the disk installed the wheel will be stiffer which is very desirable on tracks with large jumps, high traction, high speeds or high ambient temperatures.
    • The second benefit is balance and weight. With the disk installed dirt cannot buildup inside the wheel and throw off the balance and add unwanted rotating mass.
Last but not least the new EVO wheel is 6.5% lighter than the current AKA truggy wheel. 

Features:
    • Red Insert (Soft): The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance: Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it's a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Assembly Quality: AKA R-Line Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA has the best pre-mounts in the industry.


A very stable and predictable tread
$60.00  Inc Tax
AKA Racing 2 In 1 Handheld Wheel Balancer with Clay (AKA 44006)
This is the 2 in 1 handheld wheel balancer from AKA Racing.

The 2 in 1 handheld wheel balancer has been meticulously engineered to balance most 12mm hex and 17mm hex wheels, including 1:10 buggy, short course, 1:8 buggy and truggy (not compatible with stadium truck).

The sleek, lightweight design fits in any toolbox without taking up much room.

Package includes :
    • 1x balancer
    • 1x block of balancing clay



Balance most 12mm hex and 17mm hex wheels
Out of Stock
$49.95  Inc Tax
AKA Racing 1/8 Buggy GridIron II Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14013VRW)
This is a packet of (2) GridIron II 1/8 Buggy Tires from AKA Racing, pre-mounted on White EVO Buggy wheels.

The GridIron II uses the same carcass as the World Championship winning Impact tire, with the addition of added waffle ribbing to help control tire expansion and angled side pins for better performance on rougher tracks. This created a tire that is 5% lighter than the original, with improved improving acceleration and all-around performance.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

For hard packed and or tracks with little dust
$45.00  Inc Tax
AKA Racing 1/8 Buggy I-Beam Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14001VRY)
This is a pair of (2) I-Beam 1/8 Buggy Tires from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The I-Beam features a dynamic tread pattern that will perform on just about any off-road track. The large center lugs are well suited for strong acceleration, and the position of the "I-Beam" outer portion of the tread alternates to deliver the ideal balance of acceleration and cornering performance.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Forgiving Tread suitable for Loose Dirt Surfaces
Out of Stock
$45.00  Inc Tax
AKA Racing 1/8 Buggy I-Beam Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14001VRW)
This is a pair of (2) I-Beam 1/8 Buggy Tires from AKA Racing, pre-mounted on white EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The I-Beam features a dynamic tread pattern that will perform on just about any off-road track. The large center lugs are well suited for strong acceleration, and the position of the "I-Beam" outer portion of the tread alternates to deliver the ideal balance of acceleration and cornering performance.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Forgiving Tread suitable for Loose Dirt Surfaces
$45.00  Inc Tax
AKA Racing 1/8 Buggy CityBlock Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14002VRY)
This is a pair of (2) CityBlock 1/8 Buggy Tires from AKA Racing, pre-mounted on Yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The CityBlock tire is designed for hard to medium-packed surfaces. The two-stage tread features square mini-pins on top of rectangular blocks. The square mini pins are designed for superior grip on a hard-packed, high-traction racing surface. The rectangular blocks underneath the mini pins provide greater tread depth, which is also makes this versatile tire ideal for those times when you drift into the loose dirt.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

A "must have" in your Tire Collection
$45.00  Inc Tax
AKA Racing 1/8 Buggy CityBlock Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14002VRW)
This is a pair of (2) CityBlock 1/8 Buggy Tires from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The CityBlock tire is designed for hard to medium-packed surfaces. The two-stage tread features square mini-pins on top of rectangular blocks. The square mini pins are designed for superior grip on a hard-packed, high-traction racing surface. The rectangular blocks underneath the mini pins provide greater tread depth, which is also makes this versatile tire ideal for those times when you drift into the loose dirt.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

A "must have" in your Tire Collection
$45.00  Inc Tax
AKA Racing 1/8 Buggy Enduro Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14006VRY)
This is a pair of (2) Enduro 1/8 Buggy Tires from AKA Racing, pre-mounted on Yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

Based on a fresh take on tread design, the ENDURO is built on a redesigned carcass that features a stiffer sidewall for better cornering and internal ribbing to help keep the tire more stable when used on the softer proprietary AKA compounds. The large cross cut lugs offer increased tread life, while allowing the lugs to fold over and bite into the dirt even in the harshest conditions. When AKA released the CITYBLOCK tire the competition quickly followed suit, bringing new tread patterns to the track in an attempt to keep up. The AKA ENDURO will once again give the competition something to shoot for.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Larger lugs for increased tread life
$45.00  Inc Tax
AKA Racing 1/8 Buggy Enduro Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14006VRW)
This is a pair of (2) Enduro 1/8 Buggy Tires from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

Based on a fresh take on tread design, the ENDURO is built on a redesigned carcass that features a stiffer sidewall for better cornering and internal ribbing to help keep the tire more stable when used on the softer proprietary AKA compounds. The large cross cut lugs offer increased tread life, while allowing the lugs to fold over and bite into the dirt even in the harshest conditions. When AKA released the CITYBLOCK tire the competition quickly followed suit, bringing new tread patterns to the track in an attempt to keep up. The AKA ENDURO will once again give the competition something to shoot for.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Larger lugs for increased tread life
$45.00  Inc Tax
AKA Racing 1/8 Buggy Impact Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14007VRY)
This is a pair of (2) Impact 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on Yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable. The IMPACT is built on AKA's latest carcass design featured on the ENDURO and WISHBONE tires and is available in all of AKA's proprietary compounds.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

very stable and predictable tread
Out of Stock
$45.00  Inc Tax
AKA Racing 1/8 Buggy Impact Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14007VRW)
This is a pair of (2) Impact 1/8 Buggy Tires from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable. The IMPACT is built on AKA's latest carcass design featured on the ENDURO and WISHBONE tires and is available in all of AKA's proprietary compounds.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

very stable and predictable tread
$45.00  Inc Tax
AKA Racing 1/8 Buggy GridIron II Pre-Mounted Tires (2) (Yellow) (Super Soft) (Long Wear) (AKA 14013QRY)
This is a packet of (2) GridIron II 1/8 Buggy Tires in Super Soft-Long Wear Compound from AKA Racing, pre-mounted on Yellow EVO Buggy wheels.

The GridIron II uses the same carcass as the World Championship winning Impact tire, with the addition of added waffle ribbing to help control tire expansion and angled side pins for better performance on rougher tracks. This created a tire that is 5% lighter than the original, with improved improving acceleration and all-around performance.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

For hard packed and or tracks with little dust
$45.00  Inc Tax
AKA Racing 1/8 Buggy GridIron II Pre-Mounted Tires (2) (White) (Super Soft) (Long Wear) (AKA 14013QRW)
This is a packet of (2) GridIron II 1/8 Buggy Tires in Super Soft-Long Wear Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

The GridIron II uses the same carcass as the World Championship winning Impact tire, with the addition of added waffle ribbing to help control tire expansion and angled side pins for better performance on rougher tracks. This created a tire that is 5% lighter than the original, with improved improving acceleration and all-around performance.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

For hard packed and or tracks with little dust
Out of Stock
$45.00  Inc Tax
AKA Racing 1/8 Buggy Crossbrace Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14004VRY)
This is a packet of (2) Crossbrace 1/8 Buggy Tires from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Crossbrace has a medium tread depth with large, staggered center lugs, the outer tread features medium-size tapered square spikes. The tire is ideal for hard packed/medium loamy conditions.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Ideal for hard packed/medium loamy conditions.
$45.00  Inc Tax
AKA Racing 1/8 Buggy Crossbrace Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14004VRW)
This is a packet of (2) Crossbrace 1/8 Buggy Tires in Super Soft-Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Crossbrace has a medium tread depth with large, staggered center lugs, the outer tread features medium-size tapered square spikes. The tire is ideal for hard packed/medium loamy conditions.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Ideal for hard packed/medium loamy conditions.
$45.00  Inc Tax
AKA Racing 1/8 Buggy Typo Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14015VRY)
This is a packet of (2) Typo 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

After a highly successful release, the 1:10 Typo quickly became the go-to indoor tire. Meet it's big brother, the 1:8 Typo! The Typo is a very low tread pattern that has been optimized for hard-packed indoor tracks and low dust, grooved outdoor tracks.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Optimized for hard-packed low dust, grooved tracks.
$45.00  Inc Tax
AKA Racing 1/8 Buggy Typo Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14015VRW)
This is a packet of (2) Typo 1/8 Buggy Tires in Super Soft-Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

After a highly successful release, the 1:10 Typo quickly became the go-to indoor tire. Meet it's big brother, the 1:8 Typo! The Typo is a very low tread pattern that has been optimized for hard-packed indoor tracks and low dust, grooved outdoor tracks.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.
Optimized for hard-packed low dust, grooved tracks.
$45.00  Inc Tax
AKA Racing 1/8 Buggy Handlebar Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14014VRY)
This is a packet of (2) Handlebar 1/8 Buggy Tires from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Handlebar is an indoor low-profile tread patterns feature minimal tread height for speed, stability and traction on hard-packed surfaces. The leading and trailing edges of the treads have been rounded to minimize break-in time while AKA's proprietary compounds provide low tire wear.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

low-profile tread for speed, stability and traction on hard-packed surface.
Out of Stock
$45.00  Inc Tax
AKA Racing 1/8 Buggy Handlebar Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14014VRW)
This is a packet of (2) Handlebar 1/8 Buggy Tires from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Handlebar is an indoor low-profile tread patterns feature minimal tread height for speed, stability and traction on hard-packed surfaces. The leading and trailing edges of the treads have been rounded to minimize break-in time while AKA's proprietary compounds provide low tire wear.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

low-profile tread for speed, stability and traction on hard-packed surface.
Out of Stock
$45.00  Inc Tax
AKA Racing 1/8 Buggy Catapult Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14016VRY)
This is a packet of (2) Catapult 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The 1:8 Catapult is engineered to offer a balance of long life and traction on dusty abrasive tracks. The larger lugs keep wear at bay while the "C" shaped treads dig through the dust to find grip. The Catapult found its way to the top of the podium on its first race out with AKA driver, David Ronnefalk, running away with the championship at the 2014 Dirt Nitro Challenge in E-Buggy.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Balance of long life and traction on dusty abrasive tracks
$45.00  Inc Tax
AKA Racing 1/8 Buggy Catapult Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14016VRW)
This is a packet of (2) Catapult 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The 1:8 Catapult is engineered to offer a balance of long life and traction on dusty abrasive tracks. The larger lugs keep wear at bay while the "C" shaped treads dig through the dust to find grip. The Catapult found its way to the top of the podium on its first race out with AKA driver, David Ronnefalk, running away with the championship at the 2014 Dirt Nitro Challenge in E-Buggy.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Balance of long life and traction on dusty abrasive tracks
$45.00  Inc Tax
AKA Racing 1/8 Buggy Zipps Pre-Mounted Tires (2) (Yellow) (Soft) (AKA 14020SRY)
This is a packet of (2) Zipps 1/8 Buggy Tires in Soft Compound from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

AKA EVO Zipps 1/8 Buggy Pre-Mounted Tires are designed with durability and stability in mind, perfect for today's high wear and high grip tracks. The ZIPPS features a very dense symmetrical block tread pattern with a center staggered rib. The dense block pattern puts as much rubber on track as possible while still allowing dust to clear from the tire patch. This enables superior wear and stability while remaining controllable off line in the dust. The center rib decreases rolling resistance on the straights and creates a very stable platform in the center of the tire. AKA also updated the block design to allow for more deflection. This allows the block to flex a bit more front to rear to gain forward bite while still remaining stable side to side.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Designed with durability and stability in mind
$45.00  Inc Tax
AKA Racing 1/8 Buggy Zipps Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14020VRW)
This is a packet of (2) Zipps 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

AKA EVO Zipps 1/8 Buggy Pre-Mounted Tires are designed with durability and stability in mind, perfect for today's high wear and high grip tracks. The ZIPPS features a very dense symmetrical block tread pattern with a center staggered rib. The dense block pattern puts as much rubber on track as possible while still allowing dust to clear from the tire patch. This enables superior wear and stability while remaining controllable off line in the dust. The center rib decreases rolling resistance on the straights and creates a very stable platform in the center of the tire. AKA also updated the block design to allow for more deflection. This allows the block to flex a bit more front to rear to gain forward bite while still remaining stable side to side.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Designed with durability and stability in mind
$45.00  Inc Tax
AKA Racing 1/8 Buggy Rasps Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14018VRY)
This is a packet of (2) Rasps 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Rasp is a small pin tread pattern which is ideal for hard packed tracks with a dusty surface. The lower profile tread allows your car to get in and out of corners effortlessly with an emphasis on forward bite. The Rasp makes a great qualifying tire to get you that TQ!

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Ideal for hard packed tracks with a dusty surface
$45.00  Inc Tax
AKA Racing 1/8 Buggy Rasps Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14018VRW)
This is a packet of (2) Rasps 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Rasp is a small pin tread pattern which is ideal for hard packed tracks with a dusty surface. The lower profile tread allows your car to get in and out of corners effortlessly with an emphasis on forward bite. The Rasp makes a great qualifying tire to get you that TQ!

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Ideal for hard packed tracks with a dusty surface
$45.00  Inc Tax
AKA Racing 1/8 Buggy Double Down Pre-Mounted Tires (2) (Yellow) (Super Soft) (Long Wear) (AKA 14019QRY)
This is a packet of (2) Double Down 1/8 Buggy Tires in Super Soft Long-Wear Compound from AKA Racing, pre-mounted on Yellow EVO Buggy wheels.

The 2016 World Championship winning Double Down tire has been designed to fit between the Impact and the Zipp when you have a slightly dusty surface, but you need better wear characteristics due to an abrasive surface or a surface that is polished and creates lots of wheel spin. The pin size and spacing has been adjusted to give more room for dust to clear the tread pattern yet still have the pin density across the carcass to give it great wear characteristics.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Fits between the Impact and the Zipp
$45.00  Inc Tax
AKA Racing 1/8 Buggy Double Down Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14019VRW)
This is a packet of (2) Double Down 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

The 2016 World Championship winning Double Down tire has been designed to fit between the Impact and the Zipp when you have a slightly dusty surface, but you need better wear characteristics due to an abrasive surface or a surface that is polished and creates lots of wheel spin. The pin size and spacing has been adjusted to give more room for dust to clear the tread pattern yet still have the pin density across the carcass to give it great wear characteristics.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Fits between the Impact and the Zipp
$45.00  Inc Tax
AKA Racing 1/8 Buggy Chain Link Pre-Mounted Tires (2) (Yellow) (Super Soft) (AKA 14017VRY)
This is a packet of (2) Chain Link 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on yellow EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S).
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Chain Link is a unique tread pattern that works very well on low dust, grooved up tracks. The large low profile lugs keep wear at a minimum while adding consistency throughout your run. The open tread pattern gives the dust large voids to move to so the tread pattern can grip the clean surface and glide through ruts with ease.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Works very well on low dust, grooved up tracks.
$45.00  Inc Tax
AKA Racing 1/8 Buggy Chain Link Pre-Mounted Tires (2) (White) (Super Soft) (AKA 14017VRW)
This is a packet of (2) Chain Link 1/8 Buggy Tires in Super Soft Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S).
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The Chain Link is a unique tread pattern that works very well on low dust, grooved up tracks. The large low profile lugs keep wear at a minimum while adding consistency throughout your run. The open tread pattern gives the dust large voids to move to so the tread pattern can grip the clean surface and glide through ruts with ease.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

Works very well on low dust, grooved up tracks.
$45.00  Inc Tax
AKA Racing 1/8 Buggy P-One Pre-Mounted Tires (2) (Yellow) (Super Soft - Long Wear) (AKA 14021QRY)
This is a packet of (2) P-One 1/8 Buggy Tires from AKA Racing, pre-mounted on Yellow EVO Buggy wheels.

The P-One is AKA's latest addition to the line up that slots in between the GridIron II and the Impact. The target for the tire was to achieve longer wear than the GridIron II while keeping a smaller pin to perform well in the dust. To achieve this the P-One was designed with a more dense tread pattern than the Grid II using a smaller pin with closer spacing. The result is a tire that has more forward bite and life span than the GridIron II. The outer row of lugs on the P-One has been designed to provide stability under high lateral loads and keep the sidewall from collapsing into the wheel. The profile of the carcass is the same as the World Champion Double Down which will keep the car flatter in the turns and keep the transitions left to right smooth.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

P-One Features:
1) Fits between the Grid II and Impact
2) More rubber density than Grid II tread pattern equals better wear and forward traction
3) Less side bite than Grid II equals a freer feel in the turns
4) Reinforced sidewall lugs provides stability at high speed and high lateral loads


Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.
Fits between the GridIron II and the Impact
Out of Stock
$45.00  Inc Tax
AKA Racing 1/8 Buggy P-One Pre-Mounted Tires (2) (White) (Super Soft) (Long Wear) (AKA 14021QRW)
This is a packet of (2) P-One 1/8 Buggy Tires in Super Soft-Long Wear Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

The P-One is AKA's latest addition to the line up that slots in between the GridIron II and the Impact. The target for the tire was to achieve longer wear than the GridIron II while keeping a smaller pin to perform well in the dust. To achieve this the P-One was designed with a more dense tread pattern than the Grid II using a smaller pin with closer spacing. The result is a tire that has more forward bite and life span than the GridIron II. The outer row of lugs on the P-One has been designed to provide stability under high lateral loads and keep the sidewall from collapsing into the wheel. The profile of the carcass is the same as the World Champion Double Down which will keep the car flatter in the turns and keep the transitions left to right smooth.

These pre-mounts feature AKA's World Champion winning EVO wheel, combined with AKA's soft red insert. When these performance parts are combined with the AKA stiffener disc (AKA 34003Y or AKA 34003W), you have most technically advanced wheel/tire combo available.

P-One Features:
1) Fits between the Grid II and Impact
2) More rubber density than Grid II tread pattern equals better wear and forward traction
3) Less side bite than Grid II equals a freer feel in the turns
4) Reinforced sidewall lugs provides stability at high speed and high lateral loads


Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.
Fits between the GridIron II and the Impact
$45.00  Inc Tax
AKA Racing 1/8 Buggy CityBlock Pre-Mounted Tires (2) (White) (Soft) (AKA 14002SRW)
This is a packet of (2) CityBlock 1/8 Buggy Tires in Soft Compound from AKA Racing, pre-mounted on White EVO Buggy wheels.

AKA's R-Line pre-mounts feature AKA's World Championship winning EVO wheel, and when combined with the stiffener disc (34003Y or 34003W), is the most technically advanced wheel available.
The R-Line pre-mount also features AKA's soft red insert (34001S) which was also used by Cody King to win the 2010-2011 1/8 Buggy IFMAR World Championships.
Combine these two revolutionary products with the quality and endurance of AKA tires and the result is the most technically advanced pre-mounted tires ever offered for 1/8 Buggies.

The CityBlock tire is designed for hard to medium-packed surfaces. The two-stage tread features square mini-pins on top of rectangular blocks. The square mini pins are designed for superior grip on a hard-packed, high-traction racing surface. The rectangular blocks underneath the mini pins provide greater tread depth, which is also makes this versatile tire ideal for those times when you drift into the loose dirt.

Features:
    • Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.
    • EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.
    • Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Gil has been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.
    • Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.
    • Red Insert (Soft): R-Line pre-mounts also feature the new soft red insert. The red insert is designed to soak up the big bumps with its fluted internal diameter while still holding its shape in the turns to increase corner speed and consistency.
    • Tread Performance - Each tire tread is computer designed and track tested by AKA engineer Gil Losi and team drivers to ensure the best performance before each tire goes into production.

A "must have" in your Tire Collection
$45.00  Inc Tax
Per Page      1 - 40 of 101