AXIAL 1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler (RTR) (White)

Everything required is included in the box
$299.95  Inc Tax
Qty:
  • Out of Stock
Print
This is the 1/24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Ready to Run from Axial® Racing from their popular SCX24™ series. 

No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks.
Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too.
The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.



Key Features:
  • Includes radio transmitter and receiver and battery.
  • Comes with ESC, motor, and servo already installed.
  • Features a realistic new body design.
  • Licensed wheels are modeled after 1:1 KMC Machete Wheels.
  • Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires.
  • 3-Link front and 4-link rear suspension provides optimal handling.
  • Includes radio transmitter and receiver and battery.
  • Comes with ESC, motor, and servo already installed.
  • Features a realistic new body design.
  • Licensed wheels are modeled after 1:1 KMC Machete Wheels.
  • Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires.
  • 3-Link front and 4-link rear suspension provides optimal handling.

Needed to Complete:
  • Nothing — everything required is included in the box.

What's in the box?
  • 1x AX-4 2.4GHz 2-Channel Radio
  • 1x AE-6 Forward/Reverse ESC/Rx
  • 1x SCX24 88T Motor with Pinion
  • 1x AS-1 Micro Servo
  • 1x Dynamite® 7.4v 350mAh 2S LiPo Battery
  • 1x USB Charger
  • 4x AA Batteries

STEEL C-CHANNEL CHASSIS FRAME RAILS:Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.



DYNAMITE® 88T BRUSHED MOTOR: The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.


AX-4 2.4Ghz TRANSMITTER: The AX-4 transmitter features a throttle trim knob for low, medium, and high speed setting, a switch for steering servo reversing, steering dual rate, a switch for third channel applications (aux port on the ESC/Receiver), steering trim, battery level indicator, a bind button, and on/off switch. The AE-6 ESC/Receiver features a jumper for setting one of two brake options (brakes, or instant reverse), two LED light ports, an auxiliary port (channel 3), a channel 2 port, and a steering servo port.

FRONT AND REAR SOLID AXLES: 
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.

WORM GEARS: 
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.



DURABLE STEEL AXLES: Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.



SPLINED DRIVE SHAFTS: The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.



COILOVER SHOCK ABSORBERS: Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you’ve known and expect from Axial. #AXIALPERFORMANCE



LED LIGHTS INCLUDED: Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.



4-LINK REAR SUSPENSION: The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.



FULL BALL BEARINGS: Just because the SCX24™ is smaller in size doesn’t mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.


AXIAL AS-1 SERVO: Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES: Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.

The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.


HINGED BODY SYSTEM: The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just one body clip and swinging the body up.




Specifications:
 Approximate Assembly Time: No assembly required
 Ball Bearings: Full Set
 Batteries: Dynamite 7.4V 350mAh 30C LiPo
 Body: Axial Jeep JL Hardtop
 Charger: USB LiPo Charger
 Chassis: Stamped Steel Chassis Rails
 Differential: Worm gear 16T/4T
 Drivetrain: 4WD
 Ground Clearance:
 27mm
 Height: 106.5mm
 Length: 199.5mm
 Motor Size: 180
 Motor Type: Brushed 180 size, 88 turn
 Pinion: 10T
 Radio: Axial 2.4GHz 2-channel
 Servos: Axial AS-1 Micro Steering Servo
 Shock Type: Plastic body, coil over, friction (24- 33.4mm)
 Size/Scale: 1/24
 Speed Control: AE-6 ESC/RX with Reverse
 Suspension: 3-link front, 4-link rear
 Vehicle Type:
 Desert Crawler
 Water-Resistant:
 Yes
 Weight: 220 g
 Width: 99.5mm
 Wheelbase:133.5mm





  • Availability: Out of Stock
  • Model: AXI00002T1
  • Manufacturer: Axial

Write Review

Note: Do not use HTML in the text.