TLR 1/10 2WD 22 5.0 DC Race Roller: Dirt/Clay (Pre-Assembled)

Pre-assembled to TLR Race Team's Factory Specifications
$675.00  Inc Tax
  • Out of Stock
This is the TLR 22 5.0 DC (Dirt/Clay) 22 2wd racing buggy pre-assembled to TLR Race Team's Factory Specifications, the Team Losi Racing 22 5.0 DC Race Roller: 1/10 2WD Buggy will get any racer off on the right foot and competing for podiums quickly!.

Assembled to our TLR Race Team's Factory Specifications, the Team Losi RacingĀ® 22 5.0 DC Race Roller: 1/10 2wd Buggy will get any racer off on the right foot and competing for podiums quickly! Factory built and pre-assembled as a Race Roller chassis, new drivers can start racing in less time. Just add your preferred electronics, tires, and paint to make this Race Roller as unique as you. The 22 5.0 DC Race Roller has a combination of features second-to-none including low maintenance gear differential, G3 12mm big bore shocks, revamped steering geometry, and so much more. No matter if the terrain is dirt or clay, the 22 5.0 DC Race Roller is at home on the racetrack and poised for the podium.

NOTE: Painted Body and tires shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.

Key Features:
  • Pre-Assembled Race Roller
  • Low Maintenance Gear Differential
  • Adjustable Rear Hubs and Inner Rear Pivots
  • G3 12mm Big Bore Shocks
  • Revamped Steering Geometry
  • Super Heavy Duty Slipper (SHDS)
  • 2.0 Milled Aluminium Chassis
  • 22 5.0 Body
  • TLR Front Wing Included
  • Diff Height Adjustment
  • Front Roll Center Adjustment
  • 3-position Front Camber Block
  • New Battery Hold Down
  • Optimized Composites
  • TLR 6.5" Rear Wing
  • Built-In Motor Fan Mount
  • Laydown Configuration
  • All Metric Hardware

In Depth Features:
      Factory Built as a Race Roller Chassis, just install the electronics, mount the preferred tires, paint the body and the 22 5.0 DC Race Roller will be ready to hit the track and collect podiums!

      Optimized for reduced maintenance, the 22 5.0 DC Race Roller includes TLR's metal version gear differential which is ultimately reliable and uses silicone fluid to adjust performance.

      The 22 5.0 DC Race Roller includes Inner Rear Pivots with roll center, track width, anti-squat and toe adjustment paired with the Variable Height Axle (VHA) rear hubs which also give more roll center and axle height adjustment. This is the most adjustable rear suspension TLR has ever produced.

      Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle give the 22 5.0 DC Race Roller a significantly smoother steering feel, especially off-center and high speed, while increasing low-speed steering for tighter tracks and 180's.

      The new top shaft uses a sturdy M4 lock nut, the new slipper pads allow for spur gears sized 69T to 81T, reduced slipper pad area provides a more linear slip through the throttle application, and thicker slipper plate keep consistent pressure across the surface of the slipper pads.

      The G3 shocks give the 22 5.0 the plush handling and consistent, leak-free bleed as the Gen II shocks, but with some long-anticipated ease of use improvements.

      Maximizing the flex characteristics for all surfaces, the 2.0mm thick chassis give the right about of flex and rigidity for smooth corning, optimized balance, and bounce-free landings.

22 5.0 BODY:
      Maintaining the excellent balance, grip, and stability of the 22 4.0 body, with a similar styling, the 22 5.0 body is pulled from 0.8mm PC plate for a lightweight body that still has fantastic durability. As with all TLR bodies, the 5.0 body is clear and precut in the kit.

  • TLR HIGH FRONT WING INCLUDED: With the higher speed, higher grip tracks of today, a front wing will increase steering in high speed turns and on power, while making the steering on entry smoother - the best of all worlds.

  • DIFF HEIGHT ADJUSTMENT: The 22 4.0 included diff height adjustments including 0 and +3.5mm settings. The 22 5.0 DC Race Roller includes 0mm, +1mm, +1.75mm, +2.5mm, and +3.5mm diff heights to optimize bone plunge for different axle heights, ride heights, and grip levels..

  • FRONT ROLL CENTER ADJUSTMENT: The 22 5.0 DC Race Roller includes the standard Low Roll Center (LRC) front pivot with kick shim in the kit and offers the optional High Roll Center (HRC) front pivot separately. A new 1mm thick kick shim is also included. Now, racers can run the Super Low Roll, Low Roll, Medium Roll, or High Roll Centers, with a 3mm adjustment window.

      The front camber block adds a third camber link option between the tradition inside and outside holes. The new position provides the best balance of steering and stability in many conditions, and allows the 22 5.0 to be more dialed- in on more different grip levels.v

      The 22 5.0 DC Race Roller boasts the most versatile and easiest to use battery hold down system. The battery cradles key into the mud guards for five fixed, and easy to duplicate, battery positions. The battery is then held down with elastomer straps on each end that can stretch to fit any height shorty battery and any weight plates under it.

      The balance and consistency of the 22 5.0 DC Race Roller can be tuned using different composite materials in key parts throughout the vehicle. The kit included the parts the race team prefers: Stiffezel front suspension arms, soft mud guards, Stiffezel waterfall and standard rear suspension arms.

      Optional brass ballast weighs can be mounted under the servo, under the battery, and under the laydown transmission idler. This makes it easy to tune the static weight and weight bias for changing track conditions. When running a higher static weight, the chassis will become more neutral and easier to drive on ultra-high-grip surfaces.

  • TLR 6.5" REAR WING: Pulled from ultra-durable 1.2mm polycarbonate, the TLR 6.5" rear wing isn't new for the 5.0. Instead, this wing has proven itself as the longest lasting and most stable rear wing available for 1/10 2wd buggies over the past few years - and it comes in your kit.

      The prevalence of spec racing has led to the need for many racers to run motor fans to keep temperatures lower. Rather than an aluminium mount, or double-sided tape, the 22 5.0 DC Race Roller includes a molded fan mount secured to the mud guard for easy and dependable fan mounting.

      The laydown 3-gear transmission moves the motor forward by 20mm+ to a more centralized location. The benefit is a chassis that drives much flatter and carries more corner speed.

All Metric Hardware:
      Using all metric hardware make it easy to find replacement screws, nuts and washers, and helps to limit the number to tools required in the toolbox.

  • Approximate Assembly Time: 1-3 Hours
  • Ball Bearings: Full Rubber Sealed Ball Bearings
  • Body: 22 5.0 Cab Forward, 0.7mm LW
  • Brakes: Controlled via Motor/ESC
  • Chassis: 2mm Milled Plate, 7075-T6 Aluminium
  • Completion Level: Race Roller
  • Differential: Metal Gear Differential
  • Drivetrain: 2WD
  • Gear Pitch: 48-Pitch
  • Height: 147mm
  • Internal Gear Ratio: 2.43:1
  • Length: 381mm
  • Shock Type: 12mm Big Bore, Oil Filled
  • Size/Scale: 1/10
  • Spur Gear: 78, 72T
  • Suspension: Lower A-Arm, Upper Adjustable Link
  • Track: 250mm
  • Vehicle Type: Buggy
  • Wheel Diameter: 2.2 in (56mm)
  • Wheel Hex Size: 12mm
  • Wheel Type: 22 Dish, 12mm Hex
  • Wheelbase: 280mm
  • Width: 249mm

  • (1) TLR 22 5.0 DC Race Roller: 1/10 2WD Buggy Dirt/Clay
  • (1) Product Manual

Needed to Complete:
  • Availability: Out of Stock
  • Model: TLR03012
  • Manufacturer: Team Losi Racing

Write Review

Note: Do not use HTML in the text.