Team Losi Racing
Packet includes:
- 2x Carbon Rear Arm Inserts
- Required mounting hardware
TLR Race Team has been testing the grooved slipper plates with great results. The machined grooves "scrape" off any build-up that can accumulate on the slipper pad and helps the slipper drive system maintain an ideal surface for proper slipper function. This results in longer slipper pad and plate life, an easier to set slipper, more rear traction under acceleration and improved on track consistency.
Features:
- Machined grooves allow for any build-up on the slipper pad to be removed from the surface to keep slipper function optimal
- A tapered backside of the plate strengthens the plate with the slipper to tightened to maintain a flatter and more effective surface for slipper drive to occur
- Hard Anodized to prevent premature wear and strengthen
- Grooved Slipper Plates will fit all 22 2wd vehicles (22, 22T, 22SCT) as well as all XXX vehicles including the XXX-SCT
NOTE: Does not fit 22 5.0 Models
This is a packet of two Slipper Pads, Max Drive, SHDS for Smooth Power Delivery from Team Losi, for their 22 5.0 buggy and new 1/4 Promoto-MX Motorcycle.
The 6.5” wide TLR Medium Downforce Rear Wing provides fantastic grip and stability in all conditions.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Yellow wing
- 2x wickerbills
- Required hardware
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x White wing
- 2x wickerbills
- Required hardware
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Black wing
- 2x wickerbills
- Required hardware
Sway bars are ideal for high traction conditions like carpet, and will help to reduce traction rolling.
Package includes:
- 1x 0.8mm sway bar
- 1x 1.0mm sway bar
- 1x 1.2mm sway bar
- 1x 1.4mm sway bar
- 1x 1.6mm sway bar
- 1x plastic ballstud mount
- 1x sway bar mounts
- all required mounting hardware
These drive shafts can be used in either the front of rear of the vehicle.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
Arriving soon - taking pre-orders.
This is a Swing Arm Layshaft with Hardware from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
Arriving soon - taking pre-orders.
This is a Servo Saver Assembly from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
Arriving soon - taking pre-orders.
This is a Chassis Side Cover Set from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
TLR advise that these are only to be used in conjunction with a Centre Diff (TLR332085) as a slipper can overload them.
These optional standoffs are machined out of titanium for lighter weight and superior strength compared to the stock parts.
Packet includes:
- 4 x aluminium wheel hexes
- 4 x axle pins
- 4 x pin retainer o-rings
This set includes:
- Four 8x14x4mm bearings
These rear hexes are the same width as the standard plastic hexes included in the kit.
Package includes:
2x Aluminium hexes
2x screws
2x pins
Effects of Rear Track Width Adjustment:
Wider
- Increased rear grip at corner entry
- Increased high-speed on-throttle steering
- Use to avoid traction rolling
Narrower
- Increased grip at corner exit
- Increased high-speed understeer
These can also be used as a tuning option to add 3mm of track width to the front end.
Higher roll center helps to increase on power traction and is recommended in low traction conditions. High roll center is also recommended to avoid traction rolling at corner entry.
Package includes:
- 1x high roll center 3° rear/rear block
- 1x Rear/front left block
- 1x Rear/front right blocks
NOTE: Use with the TLR HRC Anti-Squat Tuning Set (TLR234019).
These tires have been pre-mounted and glued, with foam inserts installed.
Pro-Line’s Trifecta Wing is the perfect combination of Performance, Style and Durability. Buggy and Truggy wings take a beating with each crash so Pro-Line designed the Trifecta Wing to be up for the challenge.
The Trifecta Wing features an aggressive, futuristic design with large center fins for maximum stability when you need it most. Underneath the main plate of the Trifecta Wing there are 3 dimples that hang down on each side creating a “golf ball aerodynamic effect” which increases low speed down force and reduces high speed drag.
This wing also includes 2 optional wickerbills (Small & Large) that allow you to tune the performance of the wing to your liking.
Features:
- Unmatched combination of Performance, Style & Durability
- Increase Rear Traction and Downforce
- Reduce High Speed Drag
- Included Optional Wickerbills Provide Performance Tuning
- Large Center Fins for Maximum High Speed Stability
- Industry First Aerodynamic Effects Under the Wing
- Made in the USA, since 1982
- Fits 1:8 Buggy or 1:8 Truck
Packet includes:
- (1) Pro-Line 1:8 Trifecta Wing
- (2) Wickerbills
- Wickerbill Hardware: (4) M2.5 Screws (4) M2.5 Locknuts
- Wing Decals
Pro-Line’s Trifecta Wing is the perfect combination of Performance, Style and Durability. Buggy and Truggy wings take a beating with each crash so Pro-Line designed the Trifecta Wing to be up for the challenge.
The Trifecta Wing features an aggressive, futuristic design with large center fins for maximum stability when you need it most. Underneath the main plate of the Trifecta Wing there are 3 dimples that hang down on each side creating a “golf ball aerodynamic effect” which increases low speed down force and reduces high speed drag.
This wing also includes 2 optional wickerbills (Small & Large) that allow you to tune the performance of the wing to your liking.
Features:
- Unmatched combination of Performance, Style & Durability
- Increase Rear Traction and Downforce
- Reduce High Speed Drag
- Included Optional Wickerbills Provide Performance Tuning
- Large Center Fins for Maximum High Speed Stability
- Industry First Aerodynamic Effects Under the Wing
- Made in the USA, since 1982
- Fits 1:8 Buggy or 1:8 Truck
Packet includes:
- (1) Pro-Line 1:8 Trifecta Wing
- (2) Wickerbills
- Wickerbill Hardware: (4) M2.5 Screws (4) M2.5 Locknuts
- Wing Decals
Pro-Line’s Trifecta Wing is the perfect combination of Performance, Style and Durability. Buggy and Truggy wings take a beating with each crash so Pro-Line designed the Trifecta Wing to be up for the challenge.
The Trifecta Wing features an aggressive, futuristic design with large center fins for maximum stability when you need it most. Underneath the main plate of the Trifecta Wing there are 3 dimples that hang down on each side creating a “golf ball aerodynamic effect” which increases low speed down force and reduces high speed drag.
This wing also includes 2 optional wickerbills (Small & Large) that allow you to tune the performance of the wing to your liking.
Features:
- Unmatched combination of Performance, Style & Durability
- Increase Rear Traction and Downforce
- Reduce High Speed Drag
- Included Optional Wickerbills Provide Performance Tuning
- Large Center Fins for Maximum High Speed Stability
- Industry First Aerodynamic Effects Under the Wing
- Made in the USA, since 1982
- Fits 1:8 Buggy or 1:8 Truck
Packet includes:
- (1) Pro-Line 1:8 Trifecta Wing
- (2) Wickerbills
- Wickerbill Hardware: (4) M2.5 Screws (4) M2.5 Locknuts
- Wing Decals
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
Packet Includes:
- 2 x five 1.4mm hole pistons
- 2 x five 1.5mm hole pistons
The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.
Packet Includes:
- 2 x 1.3 x 8 hole piston
- 2 x "split" pistons that have four 1.3 holes and four 1.2 holes
This wing mount allows for the polycarbonate or the standard plastic wing to be used by allowing 5-40 screws, aluminum support washers and nuts to secure it to the mount, but as an added feature you can install the included machined post to continue to use the body clip method for attaching the wing to the mount.
Package includes:
- Twenty eight individual pivot inserts
These are made out of aluminium to decrease wear, and allow for increased time between clutch maintenance. They also are good for powerful engines, because they will provide a firm engagement of the clutch bell with less slipping. The decreased slipping also helps to decrease the clutch "fade" due to overheating the clutch bell and shoes.
Package includes:
- 7 pairs of long anti-squat inserts
- 4 pairs of short rear toe inserts
Arriving soon - taking pre-orders.
This is a Transmission Gear Set from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
Package includes:
- 2x front spindles
- 2x front carriers
TLR has taken their proven composite idler and ball diff gears from the 22 platform and machined them narrower to maximum performance in spec racing classes. This reduce both rotating mass, and gear drag in the transmission so that more power makes it from the motor to tires.
Features:
- Narrow Width
- Less Rotating Mass
- Less Gear Drag
Package includes:
- 2x narrow diff gear
- 2x narrow idler gears
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Included in Packet:
- 2x front inner hinge pins
- 2x rear inner hinge pins
- 2x rear outer hinge pins
This can be used to replace the rubber band mounting system in the standard 22x-4 kit.
These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.
These are used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.
Packet includes:
- 4 x axle boots
- 4 x boot retainer rings
- 2x center driveshaft coupler boots
Also fits most other brand Nitro Buggies.
br />
This is a packet of (2) Chrome Rear Wheels from Team Losi Racing for their 22S Drag Cars.
This is a packet of (2) Satin Chrome Rear Wheels from Team Losi Racing for their 22S Drag Cars.
This is a packet of (2) Black Chrome Rear Wheels from Team Losi Racing for their 22S Drag Cars.
NOTE: This does not fit the TLR 8IGHT Truggy.
This is an optional 15T clutch bell from Team Losi Racing for their 8IGHT Buggies and Truggies
This is an optional 12T High Endurance clutch bell from Team Losi Racing for their 8IGHT Buggies and Truggies