Team Losi Racing
Packet Includes:
- 1x 1.0mm front sway bar
- 1x 1.2mm front sway bar
- 1x 1.4mm front sway bar
- 1x 1.0mm rear sway bar
- 1x 1.2mm rear sway bar
- 1x 1.4mm rear sway bar
- all necessary brackets, pivot balls and sway bar mounting hardware.
Key Features:
- Ride Height Gauge will work with all 1/10- and 1/8-scale vehicles
- Rugged construction ensures the gauge will not fail or break easily
- Clear markings make the gauge easy to read and use
NOTE: Does not fit 22 5.0 Models
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
Package includes:
- Twenty eight individual pivot inserts
This is a replacement packet of two composite racing clutch shoes for the Losi 8IGHT buggy.
The composite shoes allow for a slightly softer engagement of the clutch bell to provide smoother power delivery. This is good to use on a low traction surface to help reduce wheel spin.
Has less binding than CV driveshaft to allow the suspension to work better on rough tracks
Included in Packet:
- 1x Front Shock Tower
- 1x Rear Shock Tower
TLR has taken their proven composite idler and ball diff gears from the 22 platform and machined them narrower to maximum performance in spec racing classes. This reduce both rotating mass, and gear drag in the transmission so that more power makes it from the motor to tires.
Package includes:
- 1x wing mounts for upright transmission
- 1x wing mounts for laydown transmission
- 1x wing shim
- mounting hardware
- 1x bumper
NOTE: The spring cups included in this packet are not compatible with the Losi 16mm shocks included with the 8IGHT 3.0/4.0 vehicles. The rod ends, rod end pivot balls and shock cap bushings are compatible with the 8IGHT 3.0/4.0, but the 3.0/4.0 uses the TLR243009 16mm spring cups.
Packet Includes:
- 1x Rear Gear Box bottom
- 1x Rear Gear Box bottom
- 2x sway bar mounts
This packet contains all the gears and pins to rebuild one differential.
Arriving soon - taking pre-orders.
This is a packet of Shock Plastics & Hardware from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
The hub base is molded composite, allowing a press bearing fit without play and minimal un-sprung weight compared to an aluminium hub. The aluminium plate is secured to the hub with a M3 screw and ball stud, and supports the ball stud.
By using an aluminium base, the ball stud is held securely to the hub and reduces the risk of the ball stud pushing or pulling out and coming loose.
This is a packet of (2) Chrome Front Wheels from Team Losi Racing for their 22S Drag Cars.
This is a packet of (2) Satin Chrome Front Wheels from Team Losi Racing for their 22S Drag Cars.
This is a packet of (2) Black Chrome Front Wheels from Team Losi Racing for their 22S Drag Cars.
This is a replacement Drive Belt for inside the Team Losi Racing 1/8 nitro Starter Box (TLR99059).
Packet includes:
- 2x Carbon Front Arm Inserts
- Required mounting hardware
Packet Includes:
- 1 x rear shock shaft
- 1 x piston screw
These lightweight aluminium locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs.
Features:
- Made from lightweight aluminium
- Serrated surface for additional holding power
These lightweight aluminium locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs.
Features:
- Made from lightweight aluminium
- Serrated surface for additional holding power
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
These are the replacement +3.5 rear hubs for the 22 4.0, but are compatible with the full range of 22 series vehicles.
The hub base is molded composite, allowing a press bearing fit without play and minimal un-sprung weight compared to an aluminium hub. The aluminium plate is secured to the hub with a M3 screw and ball stud, and supports the ball stud.
By using an aluminium base, the ball stud is held securely to the hub and reduces the risk of the ball stud pushing or pulling out and coming loose.
Features:
- Molded Composite Hub
- Aluminium Ball Stud Plate
- Compatible with all 22 series vehicles
Packet includes:
- 4 x lower spring retainers
- 4 x 3.5mm shock ends
- 4 x 4mm shock ends
- 4 x lower mounting balls
- 4 x shock end screws
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
Package includes:
- 2x Rear Hubs
Packet Includes:
- 1 x front shock shaft
- 1 x piston screw
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Black wing
- 2x wickerbills
- Required hardware
The HDS spurs can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles, but must be used with TLR232007 slipper pads.
The HDS spurs can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles, but must be used with TLR232007 slipper pads.
The HDS spurs can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles, but must be used with TLR232007 slipper pads.
The HDS spurs can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles, but must be used with TLR232007 slipper pads.
The HDS spurs can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles, but must be used with TLR232007 slipper pads.
Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.
Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.
This set includes:
- Four 8x16x5mm bearings