Team Losi Racing
Team Losi Racing Camber Gauge is easy-to-use and useful for novice and expert racers alike.
This key tuning device is easy to read and understand and will increase vehicle performance. The rugged construction makes this a dependable and reliable tool.
Features:
- Camber gauge is easy-to-use and understand
- Novice and expert racers alike will appreciate this key tuning device
- Rugged construction eliminates special handling or storage
NOTE: Does not fit 22 5.0 Models
This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.
Package includes:
- 8x x-ring lower cartridge seal
- 4x shock cap o-rings
- 4x lower cap o-rings
Packet includes:
- 1 x center driveshaft
- 1 x rear diff pinion gear slipper shaft
- 1 x front pinion gear slipper shaft
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
These axles are universal and can be used for the front or rear of the buggy.
Packet includes:
- 1 x 2.2mm front swaybar
- 1 x 2.4mm front swaybar
- 1 x 2.6mm rear swaybar
- 1 x 2.8mm rear swaybar
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
The TLR package of glue tips is a universal precision applicator tip to help aid in getting glue in the small areas you need, and not where you don't.
The 25mm long tip will allow for a longer life by having the ability to cut dried glue off and reuse the tip multiple times before being disposed of.
Package includes:
- 20 x glue tips
Arriving soon - taking pre-orders.
This is a Shock Rebuild Kit from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
Arriving soon - taking pre-orders.
This is a Composite Hub Set from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
Included in Packet:
- 8x skid plates
- installation hardware
These are the replacement 22 3.0 front hinge pins and king pins, but are compatible with the entire 22 series of 1/10 2wd vehicles.
Package includes:
- 2x hinge pins
- 2x king pins
- 2x lock nuts
These wider wheel hexes are direct replacements for the stock hexes on the 8IGHT and 8IGHT-T vehicles. Using these hexes will add 1/2" of width over the stock set.
Features
- Increase "track" width while staying legal
- Machined from aircraft-quality aluminum alloy
- Black-anodized to distinguish them from stock hexes
- Uses standard wheel nuts and retaining pins
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
These are used to secure the front wheels to the axles, and are used to secure the rear wheels when using the optional +1.5mm rear hexes (TLR332011).
Variable Height Axle (VHA) rear hubs give more roll center and axle height adjustments than previous models.
Note: For the 8IGHT XT Truggy please use TLR242043
This set includes all six turnbuckles needed for the steering links and front and rear camber links.
These parts are cut from quality carbon plate.
Packet includes:
- 1 x left spindle arm
- 1 x right spindle arm
Features:
- Machined serrations provide the ultimate bite against the 22 and 22-4 front wheels.
- 7mm nut surfaces to not have any chamfers providing an extremely positive fit to a nut driver, making the nuts much harder to round or strip compared to others.
- Attractive Black Anodizing
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
One of the easiest ways to improve overall performance is to reduce rotating weight. The Lightened HD Center Outdrives provide just such an advantage over the competition. These outdrives are “Heavy Duty” type direct replacement parts that fit the center differential of all 8IGHT and 8IGHT-T models and feature tight tolerance flats for the brake discs. These parts are precision machined from premium high-carbon steel and feature additional machining to remove heavy steel material without sacrificing strength. These ultra strong and light weight parts are heat treated to produce a hard wear resistant surface then get a black rust-resistant finish.
Features
- Reduce rotating weight
- Fit the center differential of all 8IGHT and 8IGHT-T models
- Parts are precision machined from premium high-carbon steel and feature additional machining to remove heavy steel material without sacrificing strength
- Parts are heat treated to produce a hard wear resistant surface then get a black rust-resistant finish
These are the standard replacement adjustable front spindles that allow you to tune dog bone plunge by using the included washers to adjust the spindle height. Package includes right and left side spindles, as well as four spindle height adjustment washers.
Packet includes:
- 1 x right side spindle
- 1 x left side spindle
- 4 x spindle height adjustment washers
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
TLR EVO shock springs are closer together in rate for finer tuning. They are also constant in coil diameter and longer length when compared to the standard TLR springs. Between the constant coil diameter and the frequency TLR has chosen for these, these handle much better in all conditions, especially when it comes to bumps and landing. These are the orange, 4.0 rate rear springs.
NOTE: There are a couple of changes needed to run these springs on your TLR 8IGHT vehicles. You will need to use the spring cups that come with the shock ends in LOSA5435 that were for the older 1.0 and 2.0 vehicles. You will also need to flip your shock collars over so the lip is on the top.
This set includes:
- Four 6x12mm bearings
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
Features:
- Helps to reduce weight for all 22 vehicles
- Flanged nuts are perfect for shock mounts to increase surface contact area
- Anodized Black to not clash with other TLR components
- Package includes ten 3mm flanged aluminum locknuts
Team Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
The higher the weight number of the oil, the thicker the oil is.
This is a replacement Wheel Pulley Set for the Team Losi Racing 1/8 nitro Starter Box (TLR99059).
Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.
TLR suggest using 81T for Mod Class and 78T for Stock Class
TLR suggest using 81T for Mod Class and 78T for Stock Class
TLR suggest using 81T for Mod Class and 78T for Stock Class
NOTE: these do not fit the other 22 5.0 versions unless you convert to VHA set-up.
Arriving soon - taking pre-orders.
This is a 4 x 65mm TiCN Shock Shaft from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
Note: These turnbuckles are directional and notched for easy thread identification.
Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load.
During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns.
The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.