Team Losi Racing
Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load.
During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns.
The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
Fits 3.5mm, 4mm and 5mm turnbuckles.
These gears are compatible with a variety of 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 5mm Bore Mod1 Pinion Gear
- (1) Set Screw
- (1) Allen Wrench
Note: These turnbuckles are directional and notched for easy thread identification.
The narrow profile provides more consistent front grip, and more steering in high load turns
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
This high grade synthetic grease contains special additives to lubricate silicone o-rings without making them swell, creating drag on the shock shaft.
The unique formula is not effected by silicone liquid so it stays on, in between, and around the shock o-rings preventing wear and unwanted friction.
Package includes:
- 4x 3 Composite Shock Caps
- 4x bleeder screws
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
This is the replacement shock tower used with the 3 gear stand up and 4-gear transmissions.
This set includes:
- Four 6x10x3mm bearings
Arriving soon - taking pre-orders.
This is a packet 2 of Shock Cap Bushings from Team Losi, for their new 1/4 Promoto-MX Motorcycle.
Used when fitting the Proline Bruggy Body to the TLR 8ight-XT
This is a packet of (2) optional Losi 5x10mm Heavy Duty Clutch Bearings from Team Losi Racing intended for use with their 1/8 scale 8ight buggy and truggy.
Can also be used in other clutches that use 5x10x4mm Bearings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
(Replaces TLR333007)
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
This oil is used in the differential of 1/8th scale off road buggies, truggies (and some 1/10th vehicles).
The higher the CS number of the oil, the thicker the oil is. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
Changing the oil in your differentials is one of the most important tuning options for off-road buggies.
Does not fit the 8ight-X models
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Package includes:
- 2x idler gears
- 1x one idler shaft
This is a packet of (2) optional Losi 5x13mm Heavy Duty Clutch Bearings from Team Losi Racing intended for use with their 1/8 scale 8ight buggy and truggy.
This is a replacement rubber drive wheel for the Team Losi Racing 1/8 nitro Starter Box (TLR99059).
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
These pinion gears are machined from high quality aluminium, and hard-coated for durability. They are compatible with a variety of 1/10 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.
Included in packet:
- (1) 48 Pitch Pinion Gear
- (1) Set Screw
This can also be used as an optional upgrade for the first generation 22 vehicles but must be used with the TLR234007 front spindles.
Package includes:
- 2x 0° caster blocks
- 2x 5° caster blocks
Note: When the caster blocks are used with the updated spindles (TLR234007 - Not Included), they provide less scrub off-set, 4mm of trail with an updated outer camber link location to transform the handling. This helps to deliver a much more balanced feel, front to rear, that makes the car easier to drive and more consistent.
Fits 3.0 Buggy Only (Use TLR244016 For Truggy)
15° non-inclined caster blocks raise the spindle, allowing the vehicle to soak up bumps with less dog bone plunge.
Fits 3.0 Truggy Only (Use TLR244004 For Buggy)
Features:
- Screw for suspension arm to shock mounting
- Left Hand Threaded Screw eliminates the bottom shock screw from backing out during long runs
- Only needed to be used on the left rear and right front suspension arms
- Black Oxide for easy identification
- Designed for use with 8IGHT Buggies
Features:
- Pit stops are quicker than ever thanks to an innovative design that makes for a positive lid opening every time
- The bright fluorescent color allows for high visibility
Also fits 22-4 1.0 if you also change the front arms (TLR234061) & pins (TLR234012).
These inserts are installed over the steering and throttle servo output shafts.