Team Losi Racing
Team Losi Racing Servo Mount & Steering Horn Set: 22-4 & 22-4 2.0 (TLR234024)
This is a Servo Mount & Steering Horn Set from Team Losi Racing for their 22-4 & 22-4 2.0 4WD racing buggies.
Package includes:
- 1x 23T servo horns
- 1x 24T servo horns
- 1x 25T servo horns
- 1x A steering horns
- 1x B steering horns
- 1x 93mm turnbuckle
- 2x rod ends
22-4 Servo Mount & Steering Horn
Team Losi Racing One-Way/Clicker Set: 22-4 (TLR232023)
This is a One-Way/Clicker Set from Team Losi Racing for their 22-4 4WD racing buggies.
Package includes:
- parts required to build the unit as a one way
- parts required to build the unit as full time 4wd assembly
- parts required to build the unit as a "clicker" assembly
22-4 One-Way/Clicker Set
Team Losi Racing Rear HRC Anti-Squat Tuning Set: 22-4 (TLR234019)
This is a HRC Anti-Squat Tuning Set from Team Losi Racing for their 22-4 4WD racing buggies.
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR HRC Pivot Set (TLR234017).
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR HRC Pivot Set (TLR234017).
22-4 Anti-Squat Tuning Set
Team Losi Racing Rear LRC Anti-Squat Tuning Set: 22-4 (TLR234018)
This is a LRC Anti-Squat Tuning Set from Team Losi Racing for their 22-4 4WD racing buggies.
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR LRC Pivot Set (TLR234016).
These inserts adjust the height of the rear/front pivot blocks and will allow you to tune the rear anti-squat between 1, 2, 2.5 and 3°.
NOTE: Use with the TLR LRC Pivot Set (TLR234016).
22-4 LRC Anti-Squat Tuning Set
Team Losi Racing Gear Differential Seal Set: 22-4 (TLR232048)
This is a Gear Differential Seal Set from Team Losi Racing for their 22-4 2.0 buggies. Includes enough to rebuild 2 differentials.
Package includes:
4x O-rings
2x Gaskets
4x washers
8x Screws
Package includes:
4x O-rings
2x Gaskets
4x washers
8x Screws
Time for diff maintenance?
Team Losi Racing 3.5x44mm TiCN Front Shock Shafts (2): 22 & 22-4 2.0 (TLR233000)
This is a packet of (2) 3.5x44mm TiCN Front Shock Shaft from Team Losi Racing for the 22 and 22-4 2.0 racing buggies.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Common TLR Front Shock Shaft
Out of Stock
$10.00 Inc Tax
$14.50
Team Losi Racing 3.5x48mm TiCN Front Shock Shaft (2): 22 SCT (TLR233001)
This is a packet of (2) 3.5x48mm TiCN Front Shock Shaft from Team Losi Racing for the 22 SCT racing Short Course Truck.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
22 SCT Front Shock Shaft
Team Losi Racing 3.5x50mm TiCN Shock Shafts (2): 22, 22T & 22SCT (TLR233002)
This is a packet of (2) 3.5x50mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 racing buggies. These are also used as front shock shafts on the TLR 22T and 22SCT Racing Trucks
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of 2wd Buggies & Front of Trucks
Out of Stock
$10.00 Inc Tax
$14.50
Team Losi Racing 3.5x57.5mm TiCN Rear Shock Shafts (2): 22SCT (TLR233004)
This is a packet of (2) 3.5x52mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 SCT racing Trucks
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of SCT Trucks
Team Losi Racing 12mm Shock End & Spring Cup Set: 22/T/SCT/22-4 (TLR5095)
This is a 12mm Shock End & Spring Cup Set from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.
Package includes:
Package includes:
- 4x Shock ends
- 4x spring cups
- 4x mounting balls
Fits most of the TLR 22 Buggies and Trucks
Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) (TLR233008)
This is a packet of (4) (1.5x2) 12mm CNC Machined Shock Piston from Team Losi Racing.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
Fits most of the 22 series of 1/10 vehicles
Team Losi Racing Rear Outer Hinge Pin Brace (3T/3A): 8ight & 8ight-T 2.0 (LOSA1749)
This is a 3T/3A Rear Outer Hinge Pin Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0.
This brace is set for 3 degrees of toe-in and 3 degrees of anti-squat.
By adjusting the amount of rear toe on your buggy, you can fine tune the amount of straight line traction that your buggy has.
This brace is set for 3 degrees of toe-in and 3 degrees of anti-squat.
By adjusting the amount of rear toe on your buggy, you can fine tune the amount of straight line traction that your buggy has.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
Team Losi Racing Socket Head Screws (3x6mm) and Washers (10) (LOSA6201)
This is a packet of (10) M3x6mm Socket Head Screws and (10) M3 Washers from Team Losi Racing, and is intended for use with their 22 and 22T 1/10 scale vehicles.
Fits many models, check your manual first
Out of Stock
$10.00 Inc Tax
Team Losi Racing 8.8mm Suspension Balls: 8IGHT 2.0 / 3.0 / 4.0 / T (LOSA6049)
This is a packet of (4) 8.8mm Suspension Balls from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits most TLR 1/8 vehicles
Team Losi Racing Battery Cover Heat Shield: 5IVE B (TLR251009)
This is a Battery Cover Heat Shield from Team Losi Racing for their 5IVE B.
Heavily discounted
Out of Stock
$10.00 Inc Tax
$24.95
Team Losi Racing Nitro Starter Box: Starter Box Plate: 8IGHT-X (TLR346000)
This is a Starter Box Plate for the Team Losi Racing 1/8 nitro Starter Box (TLR99059) to assist it to align up better with the 8IGHT-X buggies.
For Losi Starter Box (TLR99059)
Team Losi Racing Great Grease (8cc) (TLR77001)
This is a 8cc tube of Sticky Great Grease from Team Losi Racing.
Very sticky grease
Out of Stock
$9.95 Inc Tax
Team Losi Racing 1/10 Front Shock Spring Set (Blue - 3.8 Rate) (2): 22T (TLR5183)
This is a pair of Blue - (3.8 Rate) Front Shock Springs from Team Losi Racing for the 22T, 22SCT and TEN-SCTE platforms.
Fine tune your 22T, 22SCT and TEN-SCTE
Team Losi Racing 1/10 Front Shock Spring Set (Black -4.1 Rate) (2): 22T (TLR5184)
This is a pair of Black - (4.1 Rate) Front Shock Springs from Team Losi Racing for the 22T, 22SCT and TEN-SCTE platforms.
Fine tune your 22T, 22SCT and TEN-SCTE
Team Losi Racing 1/10 Front Shock Spring Set (Black -4.1 Rate) (2): 22 (TLR5177)
This is a pair of Black - (4.1 Rate) Front Shock Springs from Team Losi Racing for the 22 racing buggies.
Fine tune your TLR 22 Buggy
Team Losi Racing Front Bumper: 8IGHT-X/XE/XT/XTE (TLR241033)
This is a standard replacement Front Bumper from Team Losi Racing for their 8IGHT-X family of racing buggies & truggies..
Standard 8ight-X Front Bumper
Out of Stock
$9.95 Inc Tax
Team Losi Racing 3.5mm X-Ring Seals (8): 8IGHT-X (TLR344033)
This is a packer of (8) 3.5mm X-Ring Seals from Team Losi Racing for their 8IGHT-X racing buggies when using the optional 3.5mm Shock Shaft Conversion Kit (TLR344035).
For when using the 3.5mm conversion kit
Team Losi Racing Mod1, 40 tooth Spur Gear: Ten-SCTE (LOSB3436)
This is a Mod1, 40 tooth Spur Gear from Team Losi Racing for their Ten-SCTE trucks.
Replace worn and damaged parts
Out of Stock
$9.95 Inc Tax
Team Losi Racing Suspension Mount Set: Mini-8 /8-T (LOSB1888)
This is a Suspension Mount Set from Team Losi Racing for their 1/14 Mini-8 Buggy and Mini-8T Truck Kits.
Full set of suspension mounts
Out of Stock
$9.95 Inc Tax
Team Losi Racing Wheel Hex Set (4): Mini-8 (LOSB1931)
This is a Wheel Hex Set from Team Losi Racing for their 1/14 Mini-8 Buggy Kits.
Packet includes:
Packet includes:
- 4 x wheel hexes
- 4 x cross pins
Includes all 4
Team Losi Racing Front Arm Bushing (4): 8ight-T 2.0 (LOSA1705)
This is a packet of (4) Front Arm Bushing from Team Losi Racing for their 8ight-T 2.0 Racing Truggy.
8ight-T 2.0 bushings
Team Losi Racing Countersink Washers (#8) (8) (LOSA6351)
This is a packet of #8 Countersink Washers from Team Losi Racing.
Packet of #8 Countersink Washers
Team Losi Racing 4-40 Aluminium Mini Locknut (10) (LOSA6306)
This is a packet of (10) 4-40 Aluminium Mini Locknut from Team Losi Racing.
Packet of 4-40 Aluminium Mini Locknut
Team Losi Racing Tungesten Carbide Ball Differential Thrust Balls & Washer Set: 22 5.0 (TLR232087)
This is a Tungesten Carbide Ball Differential Thrust Balls & Washer Set from Team Losi Racing desinged for their 22 5.0 which may also fit their other 1/10 kits running a ball differentials.
May fit other TLR kits
Team Losi Racing Ackerman Shoulder Screw (2) (TLR244006)
This is a packet of (2) Ackerman Shoulder Screws from Team Losi Racing compatible with their 8ight 3.0 & 4.0 vehicles or other models that are running the Ball raced Ackerman Plate.
Fits TLR 3.0 & 4.0 vehicles
Team Losi Racing Center CV Driveshaft Couplers:10-T (LOSB3556)
This is a packet of (2) Center CV Driveshaft Couplers from Team Losi Racing for their 10-T vehicles.
Maintenance time?
Team Losi Racing .250 & .500 Wing Spacer Set: 8ight & 8ight-T 2.0 3.0 4.0 (TLR244010)
This is a .250 & .500 Wing Spacer Set from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0, 3.0 & 4.0.
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
These spacers are installed between the shock tower and wing mounts, and are used to adjust the wing position.
Packet includes:
- 2x .250 spacers
- 2x .500 spacers
Use to tune the wing position
Team Losi Racing Rear Wing Stay & Washers Set: 22-4 & 22-4 2.0 (TLR231046)
This is a Rear Wing Stay & Washers Set from Team Losi Racing for their 22-4 & 22-4 2.04WD racing buggies.
22-4 Rear Wing Stay & Washers
Team Losi Racing Gen II Differential Nut Set (TLR2946)
This is a Gen II Differential Nut Set from Team Losi Racing which is compatible with all their 1/10 kits running a ball differentials.
Fits all TLR ball differentials
Team Losi Racing Brake Pad & Screw Set :8IGHT 2.0 / 3.0 / 4.0 / T (LOSA3546)
This is a Brake Pad & Screw Set from Team Losi Racing for their 8IGHT 2.0, 3.0 and 4.0 Nitro buggies & truggies.
Fits most TLR 1/8 nitro buggies & truggies
Team Losi Racing Tri-Horn (Gen III Radio Tray) (TLR4406)
This is a Tri-Horn from Team Losi Racing compatible with their 8ight 3.0 & 4.0 vehicles or other models that are running the Gen III Radio Tray.
Fits TLR 3.0 & 4.0 vehicles
Team Losi Racing Solid Drive Pin Set (8) (TLR232002)
This is a packet of (8) Solid Drive Pins from Team Losi Racing.
Fits All of the 22 series of 1/10 vehicles
Team Losi Racing Pinion Bearing Spacer (4): 8IGHT 4.0 / T / X (TLR242019)
This is a packet of (4) Pinion Bearing Spacer from Team Losi Racing compatible with their 8ight 4.0 and 8IGHT-X buggies & truggies.
Fits TLR 8IGHT 4.0 and X buggies and truggies
Team Losi Racing Wing Stay Set: 22 & 22T (TLR4161)
This is a Wing Stay Set from Team Losi Racing for their 1st and 2nd generation of the 22 buggy and 22T Race trucks.
Fits early TLR 22, 22 2.0, 22T and 22T 2.0 kits
Team Losi Racing LRC Anti-Squat Tuning Set: 22 2.0, 22T 2.0 & 22SCT 2.0 (TLR234009)
This is a Front/Rear LRC Anti-Squat Tuning Set from Team Losi Racing for their 2nd generation 22 buggy & Truck kits.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
Fits 1st & 2nd generation TLR 22 buggy & Truck kits
Team Losi Racing HRC Anti-Squat Tuning Set: 22 2.0, 22T 2.0 & 22SCT 2.0 (TLR234010)
This is a Front/Rear HRC Anti-Squat Tuning Set from Team Losi Racing for their 2nd generation 22 buggy & Truck kits.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles when combined with the TLR234008 secured forward rear pivot block, and the TLR234011 molded suspension pivot balls.
Fits 1st & 2nd generation TLR 22 buggy & Truck kits
Out of Stock
$8.00 Inc Tax
$12.25
Team Losi Racing Upper Deck Support & Body Mount Set: Mini-8 -T (LOS211003)
This is a Upper Deck Support & Body Mount Set from Team Losi Racing for their 1/14 Mini-8T Truck Kits.
Packet includes:
Packet includes:
- 1 x chassis upper deck
- 1 x front body mounts
- 1 x rear body mounts
- 1 x front bumper
- 1 x center spur cover
Fits the Mini-8T Truck (not the Mini-8 buggy)
Team Losi Racing 6.8mm Flanged Suspension Ball (4): 8ight & 8ight-T 2.0 (LOSA6055)
This is a packet of (4) 6.8mm Flanged Suspension Ball (4) from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
Team Losi Racing Brake Caliper Springs (4): 8ight / 8ight-T (TLR242005)
This is a packet of (4) Brake Caliper Springs from Team Losi Racing for their 8IGHT 3.0 & 4.0 1/8 buggy and truggy.
These are the springs that are installed in between the brake calipers.
These are the springs that are installed in between the brake calipers.
Helps to prevent brakes from grabbing
Team Losi Racing Adjustable Hinge Pin Brace Insert Set: 8IGHT (All) (LOSA1756)
This is a Packet of (16) Adjustable Hinge Pin Brace Inserts from Team Losi Racing for their 8IGHT family of racing Buggies and Truggies.
Fits all TLR 8ight racing kits
Out of Stock
$7.50 Inc Tax
Team Losi Racing Foam Bladder Compensator Set (4): 8ight 2.0 EU (LOSA5431)
This is a packet of (4) Bladder Compensators from Team Losi Racing included with the 8IGHT 2.0 EU kit, but can be used on any of the 8IGHT family of vehicles.
These foam bladder inserts are installed between the shock cap and the shock bladder and help to re-enforce the bladder, providing more consistent shock damping.
These foam bladder inserts are installed between the shock cap and the shock bladder and help to re-enforce the bladder, providing more consistent shock damping.
Provides more consistent shock damping
Out of Stock
$7.50 Inc Tax
Team Losi Button Head Screws M3 x 14mm (10) (TLR5910)
This is a packet of ten M3 x 14mm Button Head Screws from Team Losi.
Fits many models, check your manual first
Out of Stock
$7.50 Inc Tax
Team Losi Racing Front Shock Tower: 22 (TLR1055)
This is a Front Shock Tower from Team Losi Racing for most of their 22 buggy race kits.
Fits most TLR 22 Buggy kits
Team Losi Racing 8-32 Steel Lock Nuts (10) (LOSA6311)
This is a packet of (10) 8-32 Steel Lock Nuts from Team Losi Racing.
Packet of 8-32 Steel Lock Nuts
Out of Stock
$6.95 Inc Tax
Team Losi Racing Locknut, (M3 x .5 x 5.5mm) (10) (TLR6313)
This is a packet of (10) M3 x .5 x 5.5mm Locknuts from Team Losi Racing, and is intended for use with their 22 and 22T 1/10 scale vehicles.
Fits many models, check your manual first
Team Losi Racing Clutch Springs, Silver (4): 8B, 8T (LOSA9115)
This is a set of four replacement Silver clutch springs for the Losi 8IGHT racing buggy.
These are optional springs that you can use to fine tune the way the clutch engages by using different tension clutch springs.
The bigger the spring, the stiffer it is and the later in the RPM range the clutch will engage.
The smaller the spring, the softer it is and the earlier in the RPM range the clutch will engage.
Spring chart:
These are optional springs that you can use to fine tune the way the clutch engages by using different tension clutch springs.
The bigger the spring, the stiffer it is and the later in the RPM range the clutch will engage.
The smaller the spring, the softer it is and the earlier in the RPM range the clutch will engage.
Spring chart:
- Silver: .040 wire with 30 degree angle
- Gold: .040 wire with 25 degree angle
- Black: .036 wire with 25 degree angle
- Green: .036 wire with 30 degree angle
.040 wire with 30 degree angle
Out of Stock
$6.75 Inc Tax
Team Losi Racing Flat Head Screws (10) (2x6mm) (TLR5960)
This is a packet of (10) M2x6mm Flat Head Screws from Team Losi Racing, and is intended for use with their 22 and 22T 1/10 scale vehicles.
Fits many models, check your manual first
Team Losi Racing Button Head Screws (4) (5-40x7/8”) (LOSA6273)
This is a packet of (4) 5-40x7/8” Button Head Screws from Team Losi Racing.
Packet of (4) 5-40x7/8” Button Head Screws
Team Losi Racing Flat Head Screws (10) (3x20mm) (TLR5965)
This is a packet of (10) M3x20mm Flat Head Screws from Team Losi Racing, and is intended for use with their 22 and 22T 1/10 scale vehicles.
Fits many models, check your manual first
Out of Stock
$6.25 Inc Tax
Team Losi Racing E-Clips, 3mm Shaft (12) (TLR6105)
This is a packet of (12) 3mm Shaft E-Clips from Team Losi Racing, and is intended for use with their 22 and 22T 1/10 scale vehicles.
Fits many models, check your manual first
Team Losi Racing King Pin Screws: 22-4 (8) (TLR234023)
This is a packet of (8) King Pin Screws from Team Losi Racing for their 22-4 4WD racing buggies.
22-4 King Pin Screws
Team Losi Racing Bleeder Shock Cap O-Ring (8): Ten-SCTE (TLR334000)
This is a packet of (8) Bleeder Shock Cap O-Rings from Team Losi Racing for the Ten-SCTE Racing Trucks
May fit other models
Team Losi Racing Button Head Screws (2) (3x54mm) (TLR5912)
This is a packet of (2) M3x54mm Button Head Screws from Team Losi Racing, and is intended for use with their 22 and 22T 1/10 scale vehicles.
Fits many models, check your manual first
Team Losi Racing Front/Rear CV Driveshaft Coupling Set (2): 8ight & 8ight-T 2.0/3.0/4.0 (LOSA3523)
This is a packet of (2) F/R CV Driveshaft Coupling Sets from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0 & 2.0, 3.0 & 4.0.
These couplers are to be used for the front or rear of the buggy.
These couplers are to be used for the front or rear of the buggy.
Replace regularly to keep your transmission smooth
Out of Stock
$5.50 Inc Tax
Team Losi Racing Tuned Pipe Mount & Hardware (LOSA9165)
This is a tuned pipe mount from Team Losi Racing compatible with their 8ight family of vehicles.
Will likely fit most 1/8 Nitro vehicles
Team Losi Racing 6.8mm Steering Ball Set: 8ight 2.0, 3.0 & 4.0 (LOSA6050)
This is a 6.8mm Steering Ball Set from Team Losi Racing compatible with their 8ight family of vehicles.
NOTE: These are not to fit a 8IGHT-X
NOTE: These are not to fit a 8IGHT-X
Fits 8ight 2.0, 3.0 & 4.0 vehicles
Team Losi Racing Front Suspension Arm Bushing (4): 8IGHT 3.0 / 4.0 (TLR244001)
This is a packet of (4) Front Suspension Arm Bushings from Team Losi Racing for their 8IGHT 3.0 and 4.0 Buggies & 8IGHT-T 3.0 and 4.0 Truggies.
Fits 8ight 3.0 / 4.0 Buggies & Truggies
Team Losi Racing 5x8x2.5mm Bearings (2) (TLR237000)
This is a packet of (2) replacement 5x8x2.5mm Bearings from Team Losi Racing and are intended for use with their 22 line of 1/10 scale vehicles, as well as the XXX line of 1/10 scale vehicles.
These bearings are used in the ball differential.
These bearings are used in the ball differential.
Common bearing used in TLR ball differential.
Team Losi Racing Rear Shock Tower (Rear Motor): 22 & 22 2.0 (TLR2049)
This is a Rear Shock Tower from Team Losi Racing for their 1st and 2nd generation of the 22 buggy kit.
This shock tower is used when the motor is in the rear position.
This shock tower is used when the motor is in the rear position.
Used when the motor is in the rear position
Team Losi Racing 4mm Turnbuckle Rod End (12) : 22 3.0, 22-4 2.0 & 22 SCT (TLR6017)
This is a packet of (12) 4.0mm Rod Ends from Team Losi Racing designed for the 3rd Gen TLR 22 range.
Designed for 3rd Gen TLR 22 range
Team Losi Racing 15mm Shock Shaft (4x57mm): 8IGHT & 8IGHT-T 2.0 (LOSA5413)
This is a 4x57mm Shock Shaft from Team Losi Racing for their 8IGHT racing buggy and 8ight-T Truggy 1.0 & 2.0.
Fits 8ight & 8ight-T 1.0 & 2.0 Models
Team Losi Racing Hardened Washers (#4 & 1/8”) (LOSA6350)
This is a packet of #4 & 1/8” Hardened Washers from Team Losi Racing.
Packet of #4 & 1/8” Hardened Washers
Team Losi Racing #4 Narrow Washers (LOSA6215)
This is a packet of #4 Narrow Washers from Team Losi Racing.
Packet of #4 narrow washers
Team Losi Racing 16mm Shock Piston Washer Set (8): 8IGHT 3.0 / 4.0 / X / T ( Copy ) (TLR243014)
This is a packet of (8) 16mm Shock Piston Washers from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
Fits all TLR 16mm Shocks
Out of Stock
$4.95 Inc Tax
Team Losi Racing Rear Chassis Brace: 8ight & 8ight-T 2.0 3.0 (LOSA4414)
This is a Rear Chassis Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0 & 3.0.
Fits 8ight & 8ight-T 1.0/2.0/3.0 Models