Tamiya
100ml Spray can of Sky Blue (Anodized Aluminium) Polycarbonate Paint from Tamiya.
100ml Spray can of Sparkling Pink (Anodized Aluminium) Polycarbonate Paint from Tamiya.
100ml Spray can of Purple (Anodized Aluminium) Polycarbonate Paint from Tamiya.
100ml Spray can of Champagne Gold (Anodized Aluminium) Polycarbonate Paint from Tamiya.
100ml Spray can of Lame Spray Gold Flakes Polycarbonate Paint from Tamiya.
100ml Spray can of Anodized Aluminium Polycarbonate Paint from Tamiya.
Tamiya ALFA ROMEO GIULIA SPRINT (Clear) Polycarbonate Body: M-Chassis (TAM 1825421)
This is a clear polycarbonate body from Tamiya to suit their M-chassis kits.
This is a body only and does not include slickers, mirrors etc.
body is supplied with an overspray wrapper on outside of body,Please remove before applying stickers to outside of body.
Note: Body in photo is shown painted but this body comes clear.
This is a body only and does not include slickers, mirrors etc.
body is supplied with an overspray wrapper on outside of body,Please remove before applying stickers to outside of body.
Note: Body in photo is shown painted but this body comes clear.
Body only
Out of Stock
$54.95 Inc Tax
Tamiya Needle Nose with Cutter II (TAM 74146)
This is a pair of Needle nose pliers from Tamiya for use on R/C, static model products and more, with long, slimline jaws providing superb grip.
- The pliers can be used as one would tweezers, and are also suitable for bending and cutting materials such as brass wire.
- Jaws are treated chromium-vanadium steel.
Long, slimline jaws
Tamiya 32T Brushed 540 Formula Tuned Motor (TAM 54176)
This is a 32T Brushed 540 high performance electric motor from Tamiya with replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor cooling and incorporates a detachable inboard capacitor.
• Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
• Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
• The motor produces 14,000 rpm and 39mN/m of torque (7.2V).
Features include:
• Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
• Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
• The motor produces 14,000 rpm and 39mN/m of torque (7.2V).
Features include:
- Input voltage: 7.2-8.4V
- RPM (without load): 14,000
- Maximum torque: 39mN/m of torque (at 7.2V)
- 32T
for direct drive F1 kits
Tamiya Stabilizer Set (Front & Rear): TD4 Super Avante (TAM 22037)
This is a Stabilizer Set from Tamiya to fit the Front and Rear of their Super Avante TD4 Kit
This stabilizer set heightens stability during cornering and features a choice of 2 (soft - red, hard - blue) stabilizer rods for front and rear (one for each) allowing fine-tuning of your setup.
Included in packet:
This stabilizer set heightens stability during cornering and features a choice of 2 (soft - red, hard - blue) stabilizer rods for front and rear (one for each) allowing fine-tuning of your setup.
Included in packet:
- Front Soft Stabilizer bar
- Front Hard Stabilizer bar
- Rear Soft Stabilizer bar
- Rear Hard Stabilizer bar
- 5mm aluminum ball connectors (blue)
- 5mm adjusters
- aluminium stabilizer ends (blue)
- 3mm grub screws
Includes both soft and hard bar options
Out of Stock
$49.95 Inc Tax
Tamiya 1/10 Wild One Body/Cockpit Set (Clear) (TAM 1825729)
This is a clear 1/10 scale polycarbonate Wild One Body/Cockpit Set from Tamiya,
Good for those restoration projects
Tamiya Hard Turnbuckle Shaft Set: DF-03 (TAM 53940)
This is a Hard Turnbuckle Shaft Set from Tamiya for their DF-03 buggies.
Package includes:
Features:
- Turnbuckle shafts are a great time saver, allowing fine-tuning of their length without requiring the removal of rods and arms.
- These components have the durability to withstand tough off-road drives.
- Blue anodized parts give a stylish accent.
Package includes:
- 4x 3x50mm shafts
- 2x 3x46mm shafts
- 12 5mm adjusters
Increase strength and bling
Out of Stock
$49.95 Inc Tax
Tamiya 1/10 Scale Avante 2011 Clear Body and Wing (TAM 9805258)
This is a Clear Avante 2011 Body and Wing from Tamiya.
Personalize or restore your Avante
Tamiya Racing Aluminium Steering Set: TT-02 (TAM 54574)
This is a Racing Aluminium Steering set from Tamiya for their TT-02 Chassis vehicles.
Specifications:
Specifications:
- The components in this set can be used to replace kit standard plastic A3 parts.
- Built-in ball bearings combine with the rigidity of the arms for silky smooth motion.
- Steering arm parts have a stylish blue anodized finish.
Remove slop from your TT-02 steering
Tamiya 1/10 Scale Hotshot II Clear Body and Wing (TAM 10555112)
This is a Clear Hotshot II Body and Wing from Tamiya.
Personalize or restore your Hotshot II
Out of Stock
$49.95 Inc Tax
Tamiya Chassis (Lower Deck): Top Force (TAM 4025027)
This is a Chassis Lower Deck by Tamiya for their Top Force vehicles.
Restoration project?
Out of Stock
$45.00 Inc Tax
Tamiya 1/10 Scale Egress Clear Body (TAM 1825048)
This is a Clear Egress Body from Tamiya.
Personalize or restore your Egress
Tamiya 42mm Blue Aluminium Swing Shafts (2): TRF414M & TB-Evolution II (TAM 53502)
This is a packet of (2) 42mm Blue Aluminium Swing Shafts from Tamiya for the Universal Shaft Set Assembly in their TRF414M, and TB-Evolution II 4WD on-road racing chassis.
Included in Packet:
May fit other TRF and TB models, please check manual for compatibility.
Included in Packet:
- Two swing shafts 42mm long
- One instruction sheet
May fit other TRF and TB models, please check manual for compatibility.
May fit other TRF and TB models
Tamiya 23T Brushed RS-540 Sport Tuned Motor (TAM 53068)
This is a 23T Brushed RS-540 Sport Tuned Motor from Tamiya.
The Tamiya RS-540 sport tuned motor is an economical high performance motor for on-road and off-road vehicles.
It will work in many Tamiya vehicles (check instruction manual for applications.)
Specifications:
Usable Voltage: 6-8.4V (5-7 cells)
RPM at Best Efficiency: 18,300 RPM (7.2v)
Torque at Best Efficiency: 350g/cm (7.2v)
peak rpm: 21,000
Current drain at best efficiency: 12A (7.2v)
Peak Current Draw: 50+A
The Tamiya RS-540 sport tuned motor is an economical high performance motor for on-road and off-road vehicles.
It will work in many Tamiya vehicles (check instruction manual for applications.)
Specifications:
Usable Voltage: 6-8.4V (5-7 cells)
RPM at Best Efficiency: 18,300 RPM (7.2v)
Torque at Best Efficiency: 350g/cm (7.2v)
peak rpm: 21,000
Current drain at best efficiency: 12A (7.2v)
Peak Current Draw: 50+A
Good upgrade from standard kit motors
Out of Stock
$39.95 Inc Tax
Tamiya CVA Super Mini Shocks (4): TT-02 (TAM 54753)
This is a packet of (4) Super Mini CVA Shocks from Tamiya for their TT-02 Chassis vehicles.
Package includes the parts and shock oil needed to build four shocks.
Package includes the parts and shock oil needed to build four shocks.
Replace the standard TT-02 shocks with oil filled units
Tamiya 1/10 Thundershot Body (Clear) (TAM 1825040)
This is a clear 1/10 scale polycarbonate Thundershot body from Tamiya.
Personalise your Thundershot with a new body
Tamiya Clamp Type Aluminium Wheel Hex Drive Adapter (6mm) (Silver) (4): TT-01/TT-02 etc (TAM 53569)
This is a packet of (4) 6mm Clamp Type Aluminium Wheel Hex Drive Adapter from Tamiya to fit their TT-01 / TT-02 etc
These wheel hubs are screw-tightened and clamp onto the axle for extremely secure attachment.
They are crafted in precision engineered aluminum.
Packet includes:
These wheel hubs are screw-tightened and clamp onto the axle for extremely secure attachment.
They are crafted in precision engineered aluminum.
Packet includes:
- 4x Silver 6mm Wheel Hex Drive Adapter
- 4x Pins
- 4x Screws
Will fit other vehicles
Tamiya Clamp Type Aluminium Wheel Hex Drive Adapter (5mm) (Blue) (4) (TAM 53823)
This is a packet of (4) 5mm Clamp Type Aluminium Wheel Hex Drive Adapter from Tamiya.
These wheel hubs are screw-tightened and clamp onto the axle for extremely secure attachment.
They are crafted in precision engineered aluminum.
Packet includes:
These wheel hubs are screw-tightened and clamp onto the axle for extremely secure attachment.
They are crafted in precision engineered aluminum.
Packet includes:
- 4x Blue 5mm Wheel Hex Drive Adapter
- 4x Pins
- 4x Screws
- 1x 1.5mm Allen key
Will fit other vehicles
Tamiya Dynatech 01R Motor Rotor (9019) (TAM 53002)
This is a 9019 Rotor from Tamiya for their Dynatech 01R Motor.
Restore that old Dynatech motor
Tamiya Long Nose Pliers with Cutter (TAM 74002)
This is a pair of Long Nose Pliers from Tamiya.
- These quality long nose pliers with cutter will come in doubly handy when bending wire or holding parts tight during the construction of R/C kits.
- They are made of high carbon steel with a quality finish for long life.
High quality Tamiya tool
Tamiya Mini 4x4 Monster Lunch Box Jr (TAM 17003)
This is a Mini 4x4 Monster Lunch Box Jr from Tamiya.
Monster Lunch Box
This plastic assembly kit features 4WD and large-diameter tires to enable exciting wheelie and two-wheel driving action. The motor is mounted at the center of the chassis and provides power to the front and rear wheels via a sidewinder gear setup.
The comically-styled body is matched with 52mm diameter, 31mm wide tires for plenty of laughs and the model's easy assembly does not require any cement.
Specifications:
Separately Required Items
Monster Lunch Box
This plastic assembly kit features 4WD and large-diameter tires to enable exciting wheelie and two-wheel driving action. The motor is mounted at the center of the chassis and provides power to the front and rear wheels via a sidewinder gear setup.
The comically-styled body is matched with 52mm diameter, 31mm wide tires for plenty of laughs and the model's easy assembly does not require any cement.
Specifications:
- Length: 142mm
- Width: 125mm
- Height: 101mm
- Motor Included
Separately Required Items
- R6/AA/UM3 Alkaline Battery x2
Wild Mini 4WD Series
Tamiya 25T Brushed RS-540 Torque Tuned Motor (TAM 54358)
This is a 25T Brushed RS-540 Torque Tuned Motor from Tamiya, which offers performance that is between that of a standard Type 540 27T motor and the Sport-Tuned 23T Motor.
Compared to a standard Type 540 motor, it offers a higher top speed and improved acceleration when used with RC car models with standard gear ratios.
It will work in many Tamiya vehicles (check instruction manual for applications.)
Specifications:
Usable Voltage: 6.6-7.2V
RPM at Best Efficiency: 16,000 RPM (7.2v)
Torque at Best Efficiency: 305g/cm (7.2v)
Current drain at best efficiency: 10A (7.2v)
Compared to a standard Type 540 motor, it offers a higher top speed and improved acceleration when used with RC car models with standard gear ratios.
It will work in many Tamiya vehicles (check instruction manual for applications.)
Specifications:
Usable Voltage: 6.6-7.2V
RPM at Best Efficiency: 16,000 RPM (7.2v)
Torque at Best Efficiency: 305g/cm (7.2v)
Current drain at best efficiency: 10A (7.2v)
Good upgrade from standard kit motors
Tamiya Micro Hammer (TAM 74060)
This is a Tamiya mini hammer which comes with exchangeable nylon, brass, and iron (flat & round) heads.
Switch the heads to get precise performance tailored to the subject that you are working on.
Switch the heads to get precise performance tailored to the subject that you are working on.
Includes 4 Replaceable Heads
Tamiya Decal Scissors (TAM 74031)
This is a pair of Decal Scissors, from Tamiya.
Easy to cut out those precision decals
Tamiya 27T Brushed 540 Motor (TAM 51673)
This is a 27T Brushed 540 Motor from Tamiya which is supplied with a lot of their 1/10 RC kits.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
Supplied with most Tamiya RC Kits
Tamiya HG Angled Tweezer Reverse Action (TAM 74102)
This is a Tamiya HG Angled Reverse Action Tweezer.
Reverse Action
Tamiya Hi-Torque Servo Saver with Aluminium Horn (Blue) (TAM 54799)
This is a Hi-Torque Servo Saver Set with a Blue Aluminium Horn from Tamiya.
Add nice blue alloy bling
Tamiya Decal Tweezers (TAM 74052)
This is a pair of Decal Tweezers from Tamiya.
Makes installing decals easy without getting dirty finger prints on them.
Makes installing decals easy without getting dirty finger prints on them.
Easy to place those precision decals
Tamiya Stabilizer (Front & Rear) Set: M-07 Concept (TAM 54757)
This is the Front & Rear Stabilizer Set from Tamiya for their M-07 Concept Chassis.
M-07 Front & Rear Stabilizer Set
Tamiya PS-49 Sky Blue (Anodized Aluminium) - 100ml Spray Can (TAM 86049)
This is a (100ml) Spray can of Sky Blue (Anodized Aluminium) Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
100ml Spray can of Sky Blue (Anodized Aluminium) Polycarbonate Paint from Tamiya.
Tamiya PS-50 Sparkling Pink (Anodized Aluminium) - 100ml Spray Can (TAM 86050)
This is a (100ml) Spray can of Sparkling Pink (Anodized Aluminium) Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
100ml Spray can of Sparkling Pink (Anodized Aluminium) Polycarbonate Paint from Tamiya.
Tamiya PS-51 Purple (Anodized Aluminium) - 100ml Spray Can (TAM 86051)
This is a (100ml) Spray can of Purple (Anodized Aluminium) Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
100ml Spray can of Purple (Anodized Aluminium) Polycarbonate Paint from Tamiya.
Tamiya PS-52 Champagne Gold (Anodized Aluminium) - 100ml Spray Can (TAM 86052)
This is a (100ml) Spray can of Champagne Gold (Anodized Aluminium) Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
100ml Spray can of Champagne Gold (Anodized Aluminium) Polycarbonate Paint from Tamiya.
Tamiya PS-53 Lame Spray Gold Flakes - 100ml Spray Can (TAM 86053)
This is a (100ml) Spray can of Lame Spray Gold Flakes Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Lame Spray Gold Flakes Polycarbonate Paint from Tamiya.
Tamiya PS-48 Anodized Aluminium - 100ml Spray Can (TAM 86048)
This is a (100ml) Spray can of Anodized Aluminium Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Anodized Aluminium Color: These polycarbonate paints can achieve a metallic finish on R/C cars which look like anodized aluminium parts. The effect is best seen outdoors when sunlight reflects off the painted surface.
Warning: Never use these paints on plastic models.
100ml Spray can of Anodized Aluminium Polycarbonate Paint from Tamiya.
Tamiya Aluminium Motor Mount: TT-02 (TAM 54558)
This is an Aluminium Motor Mount from Tamiya for their TT-02 Chassis vehicles.
Sturdy solid mount
Tamiya Lower Deck: M-07 Concept (TAM 51600)
This is the Lower Deck (Main Chassis Section) from Tamiya for their M-07 Concept Chassis.
M-07 Main Chassis Section
Tamiya Wheels Front and Rear Set (4): SuperShot / Super Hotshot (TAM 9335020)
This is a set of (4) Gold wheels from Tamiya for their Supershot and Super Hotshot Vehicles.
Treat your old car with some new parts
Tamiya "B" Parts (Suspension Arms): TT-01 (TAM 51003)
This is the "B" Parts (Suspension Arms) from Tamiya for their TT-01 Chassis vehicles.
TT-01 "B" Parts
Tamiya 33mm Lightweight Aluminium Swing Shafts (2): M-07 & M-08 (TAM 54969)
This is a packet of (2) Lightweight Aluminium Swing Shafts from Tamiya for their M-07 & M-08 kits.
These lightweight aluminium swing shafts have drive pin and cross joint apart by 90 degrees to ensure smoother power.
They also realize a weight savings of around a half.
Components have a stylish blue anodized finish.
Compatible Chassis
M-07 Concept & M-08 Concept Chassis
These lightweight aluminium swing shafts have drive pin and cross joint apart by 90 degrees to ensure smoother power.
They also realize a weight savings of around a half.
Components have a stylish blue anodized finish.
Compatible Chassis
M-07 Concept & M-08 Concept Chassis
Reduce the rotating mass of your drivetrain
Tamiya Aluminium King Pins (4) (Blue): DF02 (TAM 53787)
This is a packet of (4) Blue Aluminium King Pins from Tamiya for their DF02 vehicles.
4 king pins to replace part MB1 in the front axle of the DF-02 chassis, but may fit other models.
Main screw section is comprised of steel for extra durability with blue anodized aluminum head for weight loss
and improved appearance.
4 king pins to replace part MB1 in the front axle of the DF-02 chassis, but may fit other models.
Main screw section is comprised of steel for extra durability with blue anodized aluminum head for weight loss
and improved appearance.
Add some bling to your ride
Tamiya Aluminium Steering Bridge Set: TT-02 (TAM 54575)
This is a Aluminium Steering Bridge from Tamiya for their TT-02 Chassis vehicles.
Specifications:
Specifications:
- This aluminum component can be installed in place of kit standard plastic A5 part.
- It helps prevent distortion of the steering linkage, for true handling.
- Part has a stylish blue anodized finish.
Remove slop from your TT-02 steering
Out of Stock
$29.95 Inc Tax
Tamiya D Parts: Hotshot (TAM 0005116)
This is the 'D' parts from Tamiya for their Hotshot kitset.
Maintenance time for your Hotshot?
Tamiya 'P' Parts (Driver Figure): Monster Beetle (TAM 9115431)
This is Tamiya Monster Beetle 'P' Parts Driver Figure Set.
Specifications:
Included in packet:
Specifications:
- For: Tamiya Monster Beetle
- Material: Plastic
- Color: Red
Included in packet:
- Tamiya Monster Beetle P Parts Driver Figure (1 set)
Restoring a Monster Beetle?
Out of Stock
$29.95 Inc Tax
Tamiya Black Body: Blitzer Beetle, Monster Beetle (TAM 9335623)
This is Tamiya Blitzer Beetle Black Body but also fits a Monster Beetle.
Specifications:
Included in packet:
Specifications:
- For: Tamiya Blitzer Beetle and Monster Beetle
- Material: Plastic
- Color: Black
Included in packet:
- 1x Black Tamiya Beetle Body
Restoring a Beetle?
Out of Stock
$29.95 Inc Tax
Tamiya 1/10 Scale Hornet Stickers (TAM 9495452)
This is a Hornet (58336) Sticker Set from Tamiya.
Restore your Hornet
Tamiya Mini 4x4 GRASS HOPPER Jr. (VZ) (TAM 18105)
This is a Mini 4x4 Grasshopper Jr from Tamiya.
Specifications:
Separately Required Items
This assembly kit creates The Grasshopper Jr., an exciting Mini 4WD car that is based upon the legendary 1984 R/C car and 40-year Tamiya mainstay of the same name. The elegantly streamlined Grasshopper form looks great shrunk down to Mini 4WD car size, and its single seater buggy-inspired slimline form with foglamps is accented with a driver figure. Logos and numbers are included as stickers in the box, and the model runs on the compact VZ chassis.
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents.
It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.
Specifications:
- Length: 158mm
- Width: 98mm
- Height: 45mm
- Motor Included
- Easy snap-together assembly
- Large-diameter slick tires (black)
Separately Required Items
- R6/AA/UM3 Alkaline Battery x2
legendary Mini 4WD Series
Tamiya Hi-Torque Servo Saver (Black) (TAM 51000)
This is a Hi-Torque Servo Saver Set from Tamiya.
Very Popular
Tamiya Metal Parts Bag A: TT-01E (TAM 9400688)
This is a Metal Parts Bag "A" (Differential Gears) from Tamiya for their TT-01 Chassis vehicles.
TT-01 Gears, hinge pins etc
Tamiya C Parts Uprights, Steering Parts: Boomerang, Bigwig (TAM 10005257)
This is the C Parts Set from Tamiya for their Bigwig, and Boomerang Vehicles which includes uprights, steering parts and shock towers.
Treat your old car with some new parts
Tamiya Aluminium Propeller Shaft and Joint Set (Blue): TT-01 (TAM 54026)
This is a Blue Aluminium Propeller Shaft and Joint Set from Tamiya for their TT-0! Chassis vehicles.
Increases reliability
Tamiya "A" Parts (Carbon Reinforced Gear Case): TB-03 (TAM 54098)
This is a Carbon Reinforced Gear Case Set from Tamiya for their TB-03 4WD on-road racing chassis but also fit a number of other models. check manual for compatibility.
The carbon reinforced gear case are lighter and more rigid than the standard parts supplied in the kit. Drive efficiency improves due to the greater rigidity of the gear case.
The carbon reinforced gear case are lighter and more rigid than the standard parts supplied in the kit. Drive efficiency improves due to the greater rigidity of the gear case.
Also fits other TB models
Tamiya Metal Parts Bag B: TT-01E (TAM 9400689)
This is a Metal Parts Bag "B" (Differential Gears) from Tamiya for their TT-01 Chassis vehicles.
TT-01 Differential Gears
Out of Stock
$26.95 Inc Tax
Tamiya L Parts (Chrome): Clod Buster (TAM 9115146)
This is the "L" parts from Tamiya for their Clod Buster monster trucks.
Engine blower assembly
Tamiya Spire Spike Rear Tires (2): Top Force, Super Astute (TAM 53084)
This is a packet of (2) Spire Spike Rear Tires from Tamiya.
Will fit other vehicles
Tamiya Full Turnbuckle Set: TT-02B (TAM 54539)
This is a Full Set of Turnbuckles from Tamiya for their TT-02B buggies.
Features:
- Turnbuckle shafts are a simple way of altering camber and toe angle settings.
- This set includes 7 turnbuckle shafts, enough to fully kit out the TT-02B chassis: front upper arms, rear upper arms, steering tie-rods and steering rod.
- Wrench for adjustment is also included.
- Contains three 3x23mm shafts, four 3x32mm shafts, and 5mm adjusters.
Increase adjustability of your TT02B
Out of Stock
$25.50 Inc Tax
Tamiya Racing Slick Tire Set (2) (Wide) (TAM 50547)
This is the packet of (2) Wide Racing Slick Tires with Foam Inserts from Tamiya.
Features:
- Full slick rubber tires.
- Foam sponge inner liner to help cushion tires.
Packet includes:
- 2 tires
- 2 foam inserts (28mm wide, 10mm thick strip, not donut)
- 1 instruction sheet with pictures
Includes Foam Inserts
Out of Stock
$25.25 Inc Tax
Tamiya Gear Set: Hotshot, Supershot, Boomerang, Super Sabre. Bigwig (TAM 50297)
This is a Plastic Gear Set from Tamiya for their Hotshot, Supershot, Bigwig, Boomerang and Super Sabre Vehicles.
Keep that transmission running smooth
Out of Stock
$25.00 Inc Tax
Tamiya Damper Bag Set: Bigwig (TAM 9405262)
This is a Damper Bag Set from Tamiya for their Bigwig kitset.
Packet Includes:
Packet Includes:
- 2x Front Springs
- 2x Rear Springs
- 2x Front Shafts
- 2x Rear Shafts
- 4x top diaphragm seals
- 12x lower shock seals
- 6x spacers
Maintenance time for your Bigwig?
Out of Stock
$25.00 Inc Tax
Tamiya High Speed Gear Set (68T): TT-02 (TAM 54500)
This is a High Speed Gear Set (including a 68t Spur gear) from Tamiya for their TT-02 range of cars.
Get that edge with your TT-02 racer
Out of Stock
$24.95 Inc Tax
Tamiya C Parts: Clod Buster (TAM 0005295)
This is the "C" parts from Tamiya for their Clod Buster monster trucks.
Lower arms
Tamiya Carbon Fiber Stiffeners: TC-01 (TAM 54962)
This is a 2.5mm thickness carbon fiber component from Tamiya that connects the chassis and front cover (K1) for a more rigid front of the car and strengthen the suspension, plus minimize drive loss.
Compatible Chassis:
TC-01 Chassis
Compatible Chassis:
TC-01 Chassis
Looks good while strengthening your chassis
Tamiya "C" Parts (Uprights): Egress / Avante / Vanquish (TAM 9005281)
This is the "C" Parts Upright set from Tamiya designed for their Egress, Avante & Vanquish RC Kits.
May fit other cars, please check your manual for compatibility.
May fit other cars, please check your manual for compatibility.
Uprights for Egress / Avante / Vanquish
Tamiya Oval Block Tires (Rear) (2): Hotshot, Boomerang, Bigwig, Fox (TAM 9805111)
This is a packet of (2) rear spike tires from Tamiya for a lot of their 1/10 vehicle, such as the Hotshot, Boomerang, Bigwig, Super Sabre, Fox, Wildone etc, but will fit other 1/10 vehicle.
Keep your car in good running order by replacing worn out tires, or used to help restore that old car that you have lying around.
Keep your car in good running order by replacing worn out tires, or used to help restore that old car that you have lying around.
Restore those old legends
Tamiya 1/10 4wd Offroad Dish Wheels (2) (Orange) (TAM 0554009)
This is a set of (4) Orange Offroad Dish Wheels from Tamiya.
Features:
Features:
- Width F/R: 24 mm / 29mm
- Diameter: 60 mm
- Material: Plastic
- Colour: Orange
- Hexlock: 12mm
- Qty: 1 pair of front and 1 Pair of Rear
Full set of 4 wheels
Out of Stock
$24.95 Inc Tax
Tamiya G Parts (Gearbox Cases): Hotshot, Boomerang, Supershot, BigWig, Super Sabre (TAM 9115191)
This is a set of gearbox cases from Tamiya for their Hotshot, Boomerang, BigWig, SuperShot and Super Sabre Vehicles.
Treat your old car with some new parts
Out of Stock
$24.95 Inc Tax
Tamiya 1/10 Front Rib Tires (2): Fox, Novafox, Wildone (TAM 9805155)
This is a packet of (2) 1/10 Rib 2WD Front Tires from Tamiya for their Fox, Novafox and Wildone kitsets.
Nice consistent front tire
Tamiya B Parts: Clod Buster (TAM 0005294)
This is the "B" parts from Tamiya for their Clod Buster monster trucks.
Gearbox case & wheel adapters
Tamiya Mini 4x4 Thunder Shot Mk.II (TAM 95689)
This is a Mini 4x4 Thunder Shot Mk.II Jr from Tamiya.
To commemorate the Tamiya Mini 4WD Asia Challenge 2025 (TMAC) which is planned in Taiwan in early summer 2025, this limited-edition release depicts our popular Item 18620 Thunder Shot Mk.II.
It features a new color body (light smoke), MS chassis (light gray) with component parts (green), newly designed clear stickers and new packaging, which makes the car stand out!
Specifications:
Separately Required Items
To commemorate the Tamiya Mini 4WD Asia Challenge 2025 (TMAC) which is planned in Taiwan in early summer 2025, this limited-edition release depicts our popular Item 18620 Thunder Shot Mk.II.
It features a new color body (light smoke), MS chassis (light gray) with component parts (green), newly designed clear stickers and new packaging, which makes the car stand out!
- The MS chassis and A parts are molded in light gray and green plastic, respectively.
- The popular Thunder Shot Mk.II body is molded in light smoke plastic.
- Gloss-green plated, fin-type wheels are paired with black super hard low-profile tires which have “TAMIYA MINI 4WD / ASIA CHALLENGE / SUPER HARD” lettering print in white.
- Clear stickers feature a modern design which has Asia Challenge lettering and its year.
- Includes a Type 130 motor. The model features a 3.5:1 gear ratio.
- A wide range of Grade-Up Parts is available separately to customize your car.
Specifications:
- Length: 152mm
- Width: 92mm
- Height: 40mm
- Motor Included
Separately Required Items
- R6/AA/UM3 Alkaline Battery x2
Mini 4WD Pro Series
Tamiya Chassis - Grasshopper II, Super Hornet (TAM 0335092)
This is a Chassis from Tamiya supplied with their Grasshopper II and Super Hornet RC Kits.
Restore your old vintage kits
Tamiya Modelers Side Cutters (White) (TAM 69945)
This is a pair of White Modelers Side Cutters from Tamiya.
Amazing Tamiya quality
Out of Stock
$23.95 Inc Tax
Tamiya Modelers Side Cutters Basic (Grey) (TAM 74093)
This is a pair of Modeler's Side Cutter from Tamiya.
This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly.
The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time. The gray ergonomic grip is highlighted by a white Tamiya logo.
This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly.
The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time. The gray ergonomic grip is highlighted by a white Tamiya logo.
Great for cutting plastic parts form part sprues
Tamiya 1/10 Scale Avante 2011 Clear Undercowl (TAM 1835369)
This is a Clear Avante 2011 Undercowl from Tamiya.
Restore your Avante
Tamiya Stadium Blitzer Rear Tires (2) (TAM 50450)
This is a packet of (2) Stadium Blitzer Rear Tires from Tamiya.
Will fit other vehicles
Tamiya H Parts (Chrome): Clod Buster (TAM 0004894)
This is the "H" parts from Tamiya for their Clod Buster monster trucks.
Grille, roll bar and light
Out of Stock
$22.50 Inc Tax
Tamiya Light Curing Putty (34g) (TAM 87076)
This is a 34 gram tube of Light Curing Putty from Tamiya.
Revolutionary Light-Curing Putty to speed-up finishing time!
- For any busy modeler.
- Putty cures rapidly once exposed to a direct light source.
- Unbelievable curing time.
- The Light-Curing Putty will cure in approx. 1 minute when exposed to direct sunlight, or in approx. 2 minutes under fluorescent light (27W).
- Easy to handle one-component putty.
- The Light-Curing Putty is a one-component putty so does not require any curing agent, realizing very easy usability. Consisting of a smooth paste property, the putty is easy to apply to all surfaces.
- Does not shrink during curing.
- Compared to conventional polyester based putties, the Light-Curing Putty displays almost no shrinking when drying.
- Realizes excellent workability after curing.
- After completely curing, the Light-Curing Putty realizes easy cutting, trimming and filing, ensuring to obtain a smooth surface.
- Can be painted over with plastic paints.
- After curing, the Light-Curing Putty can be easily painted over with plastic paints.
- *Original color: Yellow, Net: 34g (aluminum tube).
For any busy modeler
Tamiya Toe-In Rear Upright: TT-01 (TAM 53673)
This is a packet of TGS Toe-In Rear Uprights from Tamiya for their TT-01 Chassis vehicles.
Increases rear end grip
Tamiya Oval Block Tires (Front) (2): Hotshot, Boomerang, Bigwig (TAM 9805110)
This is a packet of (2) front Oval Block tires from Tamiya for a lot of their 1/10 vehicle, such as the Hotshot, Boomerang, Bigwig, Super Sabre, etc, but will fit other 1/10 vehicle.
Keep your car in good running order by replacing worn out tires, or used to help restore that old car that you have lying around.
Keep your car in good running order by replacing worn out tires, or used to help restore that old car that you have lying around.
Restore those old legends
Tamiya 'A' parts (Gearbox cases): Manta Ray, Top-Force, Terra Conquerer (TAM 0005375)
This is the 'A' parts (Gearbox cases etc) from Tamiya for their Manta Ray, Top-Force, and Terra Conquerer vehicles.
Treat your old car with some new parts
Tamiya Titanium Coated King Pin (2): Tamiya F104 (TAM 54160)
This is a packet of (2) Titanium Coated King Pins from Tamiya for their F104 kit.
Light and Strong
Tamiya Gold Plated Wheel Set: Fox & NovaFox (TAM 9335696)
This is a Gold Plated Front & Rear Wheel Set from Tamiya designed for their (58051) Fox / (58577) Novafox RC Kits.
May fit other cars, please check your manual for compatibility..
May fit other cars, please check your manual for compatibility..
Both Front and Rear Included
Tamiya A Parts Bumpers: Fox & Novafox (TAM 0005184)
This is an A parts sprue from Tamiya designed for their (58051) Fox / (58577) Novafox RC Kits.
good for restoration projects
Tamiya Front Bumper Hotshot, Super Shot, Super Hotshot (TAM 9005164)
This is a Front Bumper from Tamiya for their Hotshot and SuperShot / Super Hotshot Vehicles.
Treat your old car with some new parts
Tamiya Screw Bag B: Bull Head (TAM 9465367)
This is the screw bag 'B' from Tamiya for their Bull Head vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya "C" Parts (Suspension Arms): M-05 (TAM 51391)
This is the "C" Parts (Suspension Arms) set from Tamiya for their M-05 Chassis vehicles.
M-05 "C" Parts
Tamiya Bathtub Chassis: TT-01 (TAM 51001)
This is the Bathtub Chassis from Tamiya for their TT-0! Chassis vehicles.
Main Chassis Section
Tamiya Bathtub Chassis: TT-02 (TAM 51532)
This is the Bathtub Chassis from Tamiya for their TT-02 Chassis vehicles.
Main Chassis Section
Tamiya Driveshaft Set: TT-01 (TAM 51006)
This is the Drive Shaft Set from Tamiya for their TT-0! Chassis vehicles.
Packet Includes:
Packet Includes:
- 2x long outer axles
- 2x medium outer axles
- 2x short inner axles
- 2x dog bone driveshafts
Various Lengths included
Tamiya "B" Parts (Suspension Arms): TT-02 (TAM 51528)
This is the "B" Parts (Suspension Arms) from Tamiya for their TT-02 Chassis vehicles.
TT-02 "B" Parts
Tamiya Aluminium Motor Heatsink: TT-02 (TAM 54571)
This is an Aluminium Motor Heatsink from Tamiya for their TT-02 Chassis vehicles.
Reduce engine temps
Tamiya "C" Parts (x2) (Suspension Arms): TT-02B (TAM 9000563)
This is packet of (2) "C" Parts (Suspension Arm Set) from Tamiya for their TT-02B Buggy Chassis.
Fits TT-02B Buggy
Tamiya Aluminium Motor Mount: TT-01 (TAM 53666)
This is an Aluminium Motor Mount from Tamiya for their TT-01 Chassis vehicles.
Sturdy solid mount
Tamiya Touring Car Large Diameter Short Spring Set (4 Pairs) (20mm) (TAM 42306)
This is a packet of (3 Pairs) or Tuned Short Shock Springs from Tamiya for 1/10 On-road vehicles.
These 20mm springs are perfectly suited to TRF Super Short Big Bore Dampers.
Included in packet:
These 20mm springs are perfectly suited to TRF Super Short Big Bore Dampers.
Included in packet:
- 2x Super Soft Springs
- 2x Soft Springs
- 2x Medium Springs
Suited to TRF Super Short Big Bore Dampers.
Tamiya Philips (+) Screwdriver Pro (Large) (TAM 74120)
This is a Large Philips (+) Screwdriver Pro from Tamiya.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
- Precision tooled magnetic bit
- For use with PH2 (3-3.5mm; JIS M3-M3.5) plus (+) head screws.
- Bit diameter/length: 4mm / 100mm
- Grip diameter/length: 28mm / 98mm
Perfect for building Tamiya RC Models
Tamiya "J" Parts (Front Wing): F104 (TAM 9115267)
This is the "J" Parts Front Wing set from Tamiya designed for their F104 Kit.
May fit other cars, please check your manual for compatibility..
May fit other cars, please check your manual for compatibility..
F104 Ferrari F60 Front Wing
Out of Stock
$19.95 Inc Tax
Tamiya Rear Rubber Tire (2) (Soft): F104 (TAM 54199)
This is a set of Soft Rear Rubber tires to fit the F104, F104 Ver.II, TRF101 & TRF102 Chassis.
These rear tires are of a softer compound rubber than kit-standard parts,
They are great for use in situations where the rear is struggling for grip. Use with hard front tires in Item 54198 is recommended when track surface temperatures are low.
Compatible wheels: Item 51398.
These rear tires are of a softer compound rubber than kit-standard parts,
They are great for use in situations where the rear is struggling for grip. Use with hard front tires in Item 54198 is recommended when track surface temperatures are low.
Compatible wheels: Item 51398.
Use when the rear end is struggling for grip.
Out of Stock
$19.95 Inc Tax
Tamiya 1/10 Rear Star-Dish Wheels (2) (White) (TAM 53086)
This is a packet of (2) White Rear Star Dish Wheels from Tamiya.
Features:
- Width: 35 mm
- Diameter: 60 mm
- Material: Plastic
- Colour: White
- Hexlock: 12mm
- Qty: 1pair
Also known as Tamiya Op-86 (6029)
Tamiya Carbon Fibre Front Shock Tower: TRF419 (TAM 13404065)
This is a Carbon Fibre Front Shock Tower from Tamiya for their TRF419 TRF419XR and TRF419XR 4WD on-road racing chassis.
Fit TRF419X, TRF419XR and TRF419XR
Tamiya "D" Parts (Upper Deck): TT-01E (TAM 51319)
This is the "D" Parts (Upper Deck) from Tamiya for their TT-01E Chassis vehicles.
TT-01E "D" Parts
Tamiya Off-Road Wide-Grooved Soft Tires (2WD/Front, 60/19) (TAM 54284)
This is a pair of 2wd Off-Road Wide-Grooved Soft Front Tires from Tamiya.
These are a softer compound than kit-standard components.
These are a softer compound than kit-standard components.
Softer compound than kit-standard components
Tamiya "B" Parts (Bumper): Boomerang / Super Sabre (TAM 9005195)
This is a "B" Parts (Bumper) from Tamiya for their Boomerang and Super Sabre Vehicles.
Treat your old car with some new parts
Out of Stock
$19.95 Inc Tax