Tamiya
Like on the Monster Racer, King Cab and Bush Devil but Red
Out of Stock
$10.00 Inc Tax
$19.95
Tamiya PS-15 Metallic Red - 100ml Spray Can (TAM 86015)
This is a (100ml) Spray can of Metallic Red Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Metallic Red Polycarbonate Paint from Tamiya.
Tamiya PS-13 Gold - 100ml Spray Can (TAM 86013)
This is a (100ml) Spray can of Gold Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Gold Polycarbonate Paint from Tamiya.
Tamiya PS-14 Copper - 100ml Spray Can (TAM 86014)
This is a (100ml) Spray can of Copper Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Copper Polycarbonate Paint from Tamiya.
Tamiya PS-12 Silver - 100ml Spray Can (TAM 86012)
This is a (100ml) Spray can of Silver Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Silver Polycarbonate Paint from Tamiya.
Tamiya PS-11 Pink - 100ml Spray Can (TAM 86011)
This is a (100ml) Spray can of Pink Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Pink Polycarbonate Paint from Tamiya.
Tamiya PS-10 Purple - 100ml Spray Can (TAM 86010)
This is a (100ml) Spray can of Purple Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Purple Polycarbonate Paint from Tamiya.
Tamiya PS-8 Light Green - 100ml Spray Can (TAM 86008)
This is a (100ml) Spray can of Light Green Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Light Green Polycarbonate Paint from Tamiya.
Tamiya PS-9 Green - 100ml Spray Can (TAM 86009)
This is a (100ml) Spray can of Green Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Green Polycarbonate Paint from Tamiya.
Tamiya PS-7 Orange - 100ml Spray Can (TAM 86007)
This is a (100ml) Spray can of Orange Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Orange Polycarbonate Paint from Tamiya.
Tamiya PS-6 Yellow - 100ml Spray Can (TAM 86006)
This is a (100ml) Spray can of Yellow Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Yellow Polycarbonate Paint from Tamiya.
Tamiya PS-5 Black - 100ml Spray Can (TAM 86005)
This is a (100ml) Spray can of Black Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Black Polycarbonate Paint from Tamiya.
Tamiya PS-4 Blue - 100ml Spray Can (TAM 86004)
This is a (100ml) Spray can of Blue Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Blue Polycarbonate Paint from Tamiya.
Tamiya PS-3 Light Blue - 100ml Spray Can (TAM 86003)
This is a (100ml) Spray can of Light Blue Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Light Blue Polycarbonate Paint from Tamiya.
Tamiya PS-2 Red- 100ml Spray Can (TAM 86002)
This is a (100ml) Spray can of Red Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of Red Polycarbonate Paint from Tamiya.
Tamiya PS-1 White - 100ml Spray Can (TAM 86001)
This is a (100ml) Spray can of White Polycarbonate Paint from Tamiya.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
100ml Spray can of White Polycarbonate Paint from Tamiya.
Tamiya Driveshafts: M-05 (2) (TAM 9805503)
This is a packet of (2) Driveshafts from Tamiya for their M-05 Chassis vehicles.
Driveshafts
Tamiya "D" Parts (Suspension Arms): M-07 Concept (TAM 51598)
This is the "D"Parts (Suspension Arms) from Tamiya for their M-07 Concept Chassis.
M-07 Suspension Arms
Tamiya "C" Parts (Uprights): M-07 Concept (TAM 51597)
This is the "C" Parts (Uprights) from Tamiya for their M-07 Concept Chassis.
M-07 Uprights
Tamiya Team Hahn Racing MAN TGS Semi Truck Wheels (4) (TAM 51588)
This is a packet of (4) Chrome coloured On-Road Racing Truck Wheels from Tamiya that come with the Team Hahn Racing MAN TGS semi-truck.
Features:
- Wheels feature a stylish matte plated finish.
- Pre-masked rims aid attachment of tires.
- Compatible with on road racing truck models on TT-01 Type-E or TT-02 chassis. Use with Item 51589 tires.
Includes:
- (2) Front Wheels
- (2) Rear Wheels
12mm Hex to fit most 1/10 vehicles
Tamiya Rear Lower Arm Set: Egress (TAM 50375)
This is a Rear Lower Arm Set from Tamiya designed for their (58583) Egress RC Kit.
May fit other cars, please check your manual for compatibility..
May fit other cars, please check your manual for compatibility..
Also fits Vanquish
Tamiya "G" Parts (Bumpers): Egress / Avante / Vanquish (TAM 9005275)
This is the "G" Parts Bumper set from Tamiya designed for their Egress, Avante & Vanquish RC Kits.
May fit other cars, please check your manual for compatibility..
May fit other cars, please check your manual for compatibility..
Bumper for Egress / Avante / Vanquish
Tamiya "G" Parts (Gear Set): TT-01 (TAM 51004)
This is the Gear Set from Tamiya for their TT-0! Chassis vehicles.
TT-01 Gear Set
Tamiya "A" Parts (Uprights): TT-01E (TAM 51318)
This is the "A" Parts (Uprights) from Tamiya for their TT-01E Chassis vehicles.
TT-01E "A" Parts
Tamiya Straight Tweezer (TAM 74004)
This is a pair of Straight Tweezers from Tamiya.
Another excellent Tamiya craft tool
Tamiya Off-Road Rib-Spike Tires (2WD/Front) (TAM 54896)
This is a pair of 2wd Off-Road Rib-Spike Front Tires from Tamiya.
Found on a number of Tamiya 2wd kits
Out of Stock
$14.95 Inc Tax
Tamiya Off-Road Rear Spike Tires (2WD/Rear): Hornet, Frog (TAM 9805034)
This is a pair of Rear Tires from Tamiya for use on the Tamiya Hornet and Frog Buggies.
Features:
- Direct replacement parts
- Ribbed black rubber
Packet Includes:
- Two rear spike buggy tires
Specifications:
- Inner Diameter: 35mm
- Outer Diameter: 95mm
- Width overall: 45mm
Found on a number of Tamiya 2wd kits
Out of Stock
$14.95 Inc Tax
Tamiya Driver Torso and Head: WR-02 (TAM 54531)
This is the Driver Torso and Head from Tamiya for their Wild Willy, Tumbling Bull & Comical Range of vehicles.
Wild Willy & Comical Range
Tamiya Front Upright: Hotshot (TAM 50648)
This is a couple of Front Uprights from Tamiya for their Top Force and Hotshot vehicles.
Treat your old car with some new parts
Tamiya Aluminium Turnbuckle Shafts (2) (Blue) (3x32mm) (TAM 54249)
This is the packet of (2) Blue Anodised 3x32mm Aluminium Turnbuckle Shafts from Tamiya for almost all of their 1/10 On-road vehicles.
Features:
Compatible Chassis:
TT-02 Type-S, TA07 PRO, TA06, TA06 PRO, TA06 MS, TB-04, TB-04 PRO, FF-04 EVO, TRF419, TRF419X, TB Evo.7, TB Evo.6, TB Evo.6 MS, MF-01X & RM-01 Chassis
Features:
- Turnbuckle shafts allow adjustment of length without removing adjusters.
- These components are crafted in lightweight and durable aluminum.
- Parts feature a stylish blue anodized finish.
Compatible Chassis:
TT-02 Type-S, TA07 PRO, TA06, TA06 PRO, TA06 MS, TB-04, TB-04 PRO, FF-04 EVO, TRF419, TRF419X, TB Evo.7, TB Evo.6, TB Evo.6 MS, MF-01X & RM-01 Chassis
Reduce weight and look great
Out of Stock
$14.95 Inc Tax
Tamiya Aluminium Turnbuckle Shafts (2) (Blue) (3x42mm) (TAM 54250)
This is the packet of (2) Blue Anodised 3x42mm Aluminium Turnbuckle Shafts from Tamiya for almost all of their 1/10 On-road vehicles.
Features:
Compatible Chassis:
TT-01, TA05, TB-03, FF-03, TRF415, TRF416, TB Evo.5, Chassis
Features:
- Turnbuckle shafts allow adjustment of length without removing adjusters.
- These components are crafted in lightweight and durable aluminum.
- Parts feature a stylish blue anodized finish.
Compatible Chassis:
TT-01, TA05, TB-03, FF-03, TRF415, TRF416, TB Evo.5, Chassis
Reduce weight and look great
Out of Stock
$14.95 Inc Tax
Tamiya 1/10 Thundershot Metal Parts Bag (TAM 9405381)
This is a Metal Parts Bag from Tamiya for their Thunder-shot, Thunder-Dragon, Fire-Dragon, Saint Dragon and Terra Scorcher.
Great when restoring kits
Tamiya Ball Diff Grease (TAM 53042)
This is a tube of Ball Diff Grease from Tamiya.
Excellent quality product
Tamiya Medium Narrow Mesh Wheels (24mm Wide) (+2 Offset) (Fluorescent Yellow) (4) (TAM 54850)
This is a packet of (4) Medium Narrow Mesh Wheels (24mm Wide) (+2 Offset) (Fluorescent Yellow) (4) from Tamiya.
Will fit other vehicles
Tamiya F104 Aluminium Body Mount Set (TAM 54200)
This is a Aluminium Body Mount Set from Tamiya for their F104 kit but can also be used on other kits.
★ Aluminum body mounts enjoy excellent durability, and these have a stylish blue anodized finish to catch the eye.
★ Contains 1 front body mount and 2 rear.
★ Aluminum body mounts enjoy excellent durability, and these have a stylish blue anodized finish to catch the eye.
★ Contains 1 front body mount and 2 rear.
Adds bling for other cars too.
Tamiya Rollbar: Blackfoot (TAM 0445076)
This is a rollbar from Tamiya provided with the Blackfoot RC kit.
Use to restore your vintage Blackfoot
Tamiya D Parts (Arms): Top Force, Manta Ray, Blazing Star, Terra Conqueror (TAM 0005378)
This is one rear and one front arm and shock plastics from Tamiya for their Top Force, Manta Ray, Blazing Star, Terra Conqueror vehicles.
Treat your old car with some new parts
Tamiya "C" Parts (Cup Joint Set): TT-02 (TAM 51529)
This is the Drive Shaft Set from Tamiya for their TT-02 Chassis vehicles.
Packet Includes:
Packet Includes:
- 1x long outer axles
- 2x medium outer axles
- 1x long inner axles
- 2x short inner axles
- 1x long centre driveshaft
- 2x dog bone driveshafts
Various Lengths included
Tamiya AV Pinion Gear Set (16T & 17T) (TAM 50354)
This is an AV Pinion Gear Set from Tamiya which includes both a 16T and 17T pinion gears.
Included in packet:
- (1) 16 Tooth Pinion Gear
- (1) 17 Tooth Pinion Gear
- (2) Set Screw
Includes 2x Pinions and 2x Set Screws
Tamiya AV Pinion Gear Set (18T & 19T) (TAM 50355)
This is an AV Pinion Gear Set from Tamiya which includes both a 18T and 19T pinion gears.
Included in packet:
- (1) 18 Tooth Pinion Gear
- (1) 19 Tooth Pinion Gear
- (2) Set Screw
Includes 2x Pinions and 2x Set Screws
Tamiya AV Pinion Gear Set (20T & 21T) (TAM 50356)
This is an AV Pinion Gear Set from Tamiya which includes both a 20T and 21T pinion gears.
Included in packet:
- (1) 20 Tooth Pinion Gear
- (1) 21 Tooth Pinion Gear
- (2) Set Screw
Includes 2x Pinions and 2x Set Screws
Tamiya AV Pinion Gear Set (22T & 23T) (TAM 50357)
This is an AV Pinion Gear Set from Tamiya which includes both a 22T and 23T pinion gears.
Included in packet:
- (1) 22 Tooth Pinion Gear
- (1) 23 Tooth Pinion Gear
- (2) Set Screw
Includes 2x Pinions and 2x Set Screws
Tamiya Aluminum Rocker Arm Posts (4): TC-01 (TAM 54963)
This is a packet of (4) rocker arm posts from Tamiya which will reduce overall weight to your Formula E.
Features:
• Aluminum Rocker Arm Posts x4
• These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams.
• Components have a hard-anodized finish for durability.
Compatible Chassis:
TC-01 Chassis
Features:
• Aluminum Rocker Arm Posts x4
• These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams.
• Components have a hard-anodized finish for durability.
Compatible Chassis:
TC-01 Chassis
Reduce overall weight to your Formula E
Tamiya Screw Bag B: Terra Scorcher (TAM 9465311)
This is the screw bag 'B' from Tamiya for their Terra Scorcher vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Thunder Shot (TAM 9465267)
This is the screw bag 'B' from Tamiya for their Thunder Shot vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Toyota Celica Gr.B (TAM 9465185)
This is the screw bag 'B' from Tamiya for their Toyota Celica Gr.B vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Bush Devil (TAM 9465393)
This is the screw bag 'B' from Tamiya for their Bush Devil vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Out of Stock
$14.00 Inc Tax
Tamiya E Parts: Hotshot (TAM 9005866)
This is the 'E' parts from Tamiya for their Hotshot kitset.
Maintenance time for your Hotshot?
Tamiya Masking Tape (18mm) including Dispenser (TAM 87032)
This is a 18mm wide masking tape from Tamiya in a handy dispenser.
Features:
Features:
- Thin, self-adhesive paper tape, developed for model applications.
- Flexible.
- Easily applied to curved surfaces making it ideal for masking off areas for painting, etc.
- Comes in a plastic, reusable dispenser.
- Dispenser teeth cuts the tape to your desired length.
18mm masking tape includes dispenser
Tamiya Differential Nut Screw Set: TD4 / Super Avante (TAM 22029)
This is the Differential Nut Screw Set from Tamiya for almost all of their vehicles.
This is a Hop-Up Option is for use with the TD4 chassis. The rigid aluminum differential nut allows precise adjustment of ball differentials used on the kit. A precision differential screw is included.
This durable aluminum differential nut (blue) and precision differential screw can be used in place of the kit standard plastic nut for superior precision.
Packet Includes:
This is a Hop-Up Option is for use with the TD4 chassis. The rigid aluminum differential nut allows precise adjustment of ball differentials used on the kit. A precision differential screw is included.
This durable aluminum differential nut (blue) and precision differential screw can be used in place of the kit standard plastic nut for superior precision.
Packet Includes:
- 1x differential spring
- 2x thrust plates
- 8x 1/16-inch steel balls
- 1x precision differential screw
- 1x rigid aluminum differential nut
Strengthen the Super Avante ball diff
Tamiya Reinforced Gear Set: M-05 (TAM 54277)
This is the Reinforced Gear Set from Tamiya for their M-05 Chassis vehicles.
Stronger M-05 gears
Tamiya Cera-Grease HG (10g) (TAM 87099)
This is a 10 gram tube of Cera-Grease HG from Tamiya.
This Cera-grease HG is made using Boron Nitride which gives it superior lubrication ability. Cera-grease provides excellent lubrication, and can be used with plastic or metal parts, gears and bearings.
This Cera-grease HG is made using Boron Nitride which gives it superior lubrication ability. Cera-grease provides excellent lubrication, and can be used with plastic or metal parts, gears and bearings.
For Plastic and Metal parts
Tamiya Aluminium Suspension Mount Spacers (1mm) (4): TRF419 (TAM 53933)
This is a packet of (4) 1mm Aluminium Suspension Mount Spacers from Tamiya for their TRF419 4WD on-road racing chassis.
May also fit a number of other models. check manual for compatibility.
May also fit a number of other models. check manual for compatibility.
May fit other TRF models
Tamiya Front Belt (171T): TRF419 (TAM 51569)
This is a Front 171 tooth Belt from Tamiya for their TRF419 4WD on-road racing chassis.
- This belt is made from reinforced, stretch-resistant material.
- It is recommended to change belts periodically to maintain optimum performance.
- Contains TRF419 Front Belt (171T) x1
TRF419 Front Belt
Tamiya Mesh Wheel Set for Rubber Tires: F104 (TAM 51398)
This is a set of (4) Silver Mesh wheels for mounting rubber tires on the F104, F104 Ver.II PRO, TRF101 & TRF102 Chassis
Replace parts in a timely fashion to ensure that your car runs at peak performance.
Compatible tires: Item 51400, Item 54198 and Item 54199.
Replace parts in a timely fashion to ensure that your car runs at peak performance.
Compatible tires: Item 51400, Item 54198 and Item 54199.
Give your car a fresh look!
Tamiya Off-Road Front Rib Tires (2WD/Front): Hornet, Frog, Sand Scorcher (TAM 9805033)
This is a pair of Front Tires from Tamiya for use on the Tamiya Hornet, Frog and Sand Scorcher Buggies.
Features:
- Direct replacement parts
- Ribbed black rubber
Packet Includes:
- Two front ribbed buggy tires
Specifications:
- Inner Diameter: 35mm
- Outer Diameter: 72mm
- Width overall: 20.34mm
Found on a number of Tamiya 2wd kits
Out of Stock
$12.95 Inc Tax
Tamiya R/C Fluorescent Colour Antenna Pipes (4) (TAM 53132)
This is a packet of (4) fluorescent color antenna pipes from Taimya.
Package includes:
Package includes:
- 1x orange antenna pipe
- 1x pink antenna pipe
- 1x green antenna pipe
- 1x yellow antenna pipe
- 1x Alloy antenna pipe mount
- 2x Red antenna caps
- 2x Blue antenna caps
Give your ride that cool vintage look.
Tamiya Parts (Bumper): Top Force (TAM 0445212)
This is a Bumper from Tamiya designed for their Top Force RC Kit.
Use to restore your Top Force
Tamiya Masking Tape (10mm) including Dispenser (TAM 87031)
This is a 10mm wide masking tape from Tamiya in a handy dispenser.
Features:
Features:
- Thin, self-adhesive paper tape, developed for model applications.
- Flexible.
- Easily applied to curved surfaces making it ideal for masking off areas for painting, etc.
- Comes in a plastic, reusable dispenser.
- Dispenser teeth cuts the tape to your desired length.
10mm masking tape includes dispenser
Out of Stock
$12.00 Inc Tax
Tamiya Screw Pin Bag: Bigwig (TAM 9405261)
This is a Screw Pin Bag from Tamiya for their Bigwig kitset.
Packet Includes:
Packet Includes:
- 4x 3x46mm Screw Pin
- 2x 3x38mm Screw Pin
- 6x 3x32mm Screw Pin
- 2x 3x22mm Screw Pin
- 1x 3x12mm Screw Pin
- 1x Body Mount
Maintenance time for your Bigwig?
Tamiya Screw Bag C: Bigwig (TAM 9465156)
This is the screw bag C from Tamiya for their Bigwig vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Fire Dragon (TAM 9465327)
This is the screw bag 'A' from Tamiya for their Fire Dragon vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Fire Dragon (TAM 9465328)
This is the screw bag 'B' from Tamiya for their Fire Dragon vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag C: Thunder Shot (TAM 9465268)
This is the screw bag 'C' from Tamiya for their Thunder Shot vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Vanquish (TAM 9465314)
This is the screw bag 'A' from Tamiya for their Vanquish vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Vanquish (TAM 9465315)
This is the screw bag 'B' from Tamiya for their Vanquish vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag D: Vanquish (TAM 9465317)
This is the screw bag 'D' from Tamiya for their Vanquish vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag C: Toyota Celica Gr.B (TAM 9465186)
This is the screw bag 'C' from Tamiya for their Toyota Celica Gr.B vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag C: Porsche 959 (TAM 9465166)
This is the screw bag 'C' from Tamiya for their Porsche 959 vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Striker (TAM 9465173)
This is the screw bag 'B' from Tamiya for their Striker vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Racing Master (TAM 9465128)
This is the screw bag 'A' from Tamiya for their Racing Master vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Out of Stock
$12.00 Inc Tax
Tamiya "D" Parts (Damper Stay): M-05 (TAM 51392)
This is the "D" Parts (Damper Stay) set from Tamiya for their M-05 Chassis vehicles.
M-05 "D" Parts
Tamiya "G" Parts (Gear Set): M-03 (TAM 50794)
This is the "G" Parts (Gear Set) from Tamiya for their M-03 Chassis vehicles.
M-03 "G" Parts
Tamiya "D" Parts (Motor Mount): TT-02 (TAM 51530)
This is the "D" Parts (Motor Mount) from Tamiya for their TT-02 Chassis vehicles.
TT-02 "D" Parts
Tamiya "G" Parts (Gear Set): TT-02 (TAM 51531)
This is the "G" Parts (Gear Set) from Tamiya for their TT-02 On-Road Chassis.
Include in package:
Include in package:
- G parts (Gear) (2 pcs)
- Spur gear (1 pc)
- Adapter (1 pc)
TT-02 Gear Set
Tamiya Screw Bag C: Boomerang (TAM 9465149)
This is the screw bag C from Tamiya for their Boomerang vehicles.
Some common nuts, washers, pins and screws for Tamiya cars.
Some common nuts, washers, pins and screws for Tamiya cars.
Some common nuts etc for Tamiya cars
Tamiya "F" Parts (Front Suspension): F104 (TAM 51381)
This is the "F" Parts Front Suspension set from Tamiya designed for their F104 Kit.
May fit other cars, please check your manual for compatibility.
Replace after large crashes for best performance
Tamiya "F" Parts (Upright): M-05 (TAM 51393)
This is the "F" Parts (Upright) set from Tamiya for their M-05 Chassis vehicles.
M-05 "F" Parts
Out of Stock
$10.95 Inc Tax
Tamiya Aluminium Suspension Mount Spacers (0.5mm) (4): TRF419 (TAM 54617)
This is a packet of (4) 0.5mm Aluminium Suspension Mount Spacers from Tamiya for their TRF419 4WD on-road racing chassis.
May also fit a number of other models. check manual for compatibility.
May also fit a number of other models. check manual for compatibility.
May fit other TRF models
Tamiya 2X8mm Tapping Screws (10) (TAM 50573)
This is a Packet of (10) 2x8mm tapping Screws from Tamiya.
Packet of 10 Screws
Tamiya Masking Tape (6mm) including Dispenser (TAM 87030)
This is a 6mm wide masking tape from Tamiya in a handy dispenser.
Features:
Features:
- Thin, self-adhesive paper tape, developed for model applications.
- Flexible.
- Easily applied to curved surfaces making it ideal for masking off areas for painting, etc.
- Comes in a plastic, reusable dispenser.
- Dispenser teeth cuts the tape to your desired length.
6mm masking tape includes dispenser
Tamiya Monster Truck Front Wheels (Red) (2) (TAM 50428-1)
This is a pair of (2) Red Front Monster Truck Wheels from Tamiya similar to the rims on the Monster Racer, King Cab and Bush Devil except Red.
Like on the Monster Racer, King Cab and Bush Devil but Red
Out of Stock
$10.00 Inc Tax
$19.95
Tamiya Screw Bag A: Bigwig (TAM 9465154)
This is the screw bag A from Tamiya for their Bigwig vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag D: Monster Beetle (TAM 9465171)
This is the screw bag 'D' from Tamiya for their Monster Beetle vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Bush Devil (TAM 9465392)
This is the screw bag 'A' from Tamiya for their Bush Devil vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Out of Stock
$10.00 Inc Tax
Tamiya Screw Bag A: Bear Hawk (TAM 9465380)
This is the screw bag 'A' from Tamiya for their Bear Hawk vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Road Wizard (TAM 9465259)
This is the screw bag 'A' from Tamiya for their Road Wizard vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Road Wizard (TAM 9465260)
This is the screw bag 'B' from Tamiya for their Road Wizard vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag C: Road Wizard (TAM 9465261)
This is the screw bag 'C' from Tamiya for their Road Wizard vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B : Group C (TAM 9465373)
This is the screw bag 'B' from Tamiya for their Group C vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya "B" Parts (Steering Wiper): M-05 (TAM 51390)
This is the "B" Parts (Steering Wiper) set from Tamiya for their M-05 Chassis vehicles.
M-05 "B" Parts
Tamiya Molybdenum Grease (10g) (TAM 87022)
This is a 10 gram tube of Molybdenum Grease from Tamiya.
This grease consists of Molybdenum disulfide and is ideal to use with R/C gear-boxes.
It’s anti-friction properties ensure your gearbox stays well lubricated and spins freely, maximizing your drivetrain efficiency.
This grease consists of Molybdenum disulfide and is ideal to use with R/C gear-boxes.
It’s anti-friction properties ensure your gearbox stays well lubricated and spins freely, maximizing your drivetrain efficiency.
Ideal for inside model gear-boxes
Tamiya Bevel Gear Set for Gear Differential: TRF419 (TAM 51567)
This is the Bevel Gear Set from Tamiya for the Gear Differential in their TRF419 4WD on-road racing chassis.
Internal Diff Gears
Tamiya 4x30mm Aluminium Countersunk Head Screws (5): F104 (TAM 9808050)
This is a pacyet of (5) 4x30mm Aluminium Countersunk Head Screws from Tamiya designed for their F104 Kit.
May fit other cars, please check your manual for compatibility..
May fit other cars, please check your manual for compatibility..
Used to mount Front Wing
Tamiya Rear Belt (61T): TRF419 (TAM 51570)
This is a Rear 61 tooth Belt from Tamiya for their TRF419 4WD on-road racing chassis.
- This belt is made from reinforced, stretch-resistant material.
- It is recommended to change belts periodically to maintain optimum performance.
- Contains TRF419 Rear Belt (61T) x1
TRF419 Rear Belt
Out of Stock
$9.95 Inc Tax
Tamiya 5mm Ball Connector Set (8): Tamiya (TAM 50875)
This is a packet of (8) 5mm Ball Connector Set from Tamiya for their TA04, DF-03 and M07 on-road racing chassis.
Features: Durable black nylon construction.
Includes: Includes eight ball connectors.
Specifications:
- Length: 24mm
- Ball Cup Diameter: 4.4mm
Note: This ball connector accepts 5mm ball studs.
Fit TA04, DF-03 and M07 and others
Tamiya Urethane Bumper: TB-02 (TAM 51047)
This is a Urethane Bumper from Tamiya for their TB-02 Chassis vehicles but may fit other other vehicle with slight modifications.
Protects your body during impacts
Tamiya Poloycarbonate Body Cleaner / Paint Remover (40ml) (TAM 87118)
This is a 40ml Bottle of Polycarbonate Body Cleaner from Tamiya that works great to safely and easily remove paint without damaging the polycarbonate body.
Great for safely removing paint
Tamiya 'P' Parts (Servo Horn): TT-01 / TT-02 (TAM 51005)
This is the 'P' Parts tree from Tamiya for their TT-01 and TT-02 Chassis vehicles.
This parts tree includes the servo horn and front suspension bushes.
Includes the bushes for the front Suspension
Tamiya 0.8 Module Steel Pinion Gear Set (17T) (TAM 54628)
This is an Steel 17T 08 Module Pinion Gear from Tamiya for greater durability compared to kit standard aluminium pinion gears.
Included in packet:
- 1x 17 Tooth 08 Module Pinion Gear
- 1x Grub screw for attachment
Steel for greater durability
Tamiya Spare Gear Set: M-08 (TAM 51621)
This is a spare gear set from Tamiya for their M-08 kit.
Keep your M-08 Concept RWD chassis in peak, smooth-running condition by changing out worn gears with these spare parts.
Included in packet:
Compatible Chassis:
Compatible with M-08 Concept chassis cars
Keep your M-08 Concept RWD chassis in peak, smooth-running condition by changing out worn gears with these spare parts.
Included in packet:
- 1x M-08 Concept Spur Gear (37T/21T)*
- 1x M-08 Concept Counter Gear (29T/23T)*
- 1x M-08 Concept Idler Gear (23T)
Compatible Chassis:
Compatible with M-08 Concept chassis cars
Keep you trans running smooth