Tamiya
Tamiya Screw Bag C: Top-Force (TAM 9465398)
This is the screw bag C from Tamiya for their Top-Force vehicles.
Some common nuts etc for Tamiya cars
Tamiya Aluminium Roof Panel: SuperShot / Super Hotshot (TAM 4305180)
This is an Aluminium Roof Panel from Tamiya for their Supershot and Super Hotshot Vehicles.
Treat your old car with some new parts
Tamiya Front Wheel Set (2): Hotshot, Boomerang, Super Sabre (TAM 0555069)
This is a pair of (2) White front wheels from Tamiya for their Hotshot, Boomerang and Super Sabre Vehicles.
Treat your old car with some new parts
Tamiya - Joint Boot: Frog, Monster Beetle, Blackfoot. Brat (TAM 6255002)
This is the rubber Joint Boots that fit around the outside of the axles on all Tamiya ORV chassis variants like the Frog, Monster Beetle, Blackfoot. Subaru Brat etc
Fits all ORV chassis variants
Tamiya Gear Bag: DT02 & DT03 (TAM 9335432)
This is a Gear Bag from Tamiya for the DT02 & DT03 buggies and trucks.
Compatible with Racing Fighter, Super Fighter, Sand-Viper, Sand Rover, Neo Falcon, Holiday Buggy, Neo Fighter & Aqroshot.
Compatible with Racing Fighter, Super Fighter, Sand-Viper, Sand Rover, Neo Falcon, Holiday Buggy, Neo Fighter & Aqroshot.
Maintenance time?
Tamiya Rear Wheel Set (2): Hotshot, Boomerang, Super Sabre (TAM 0555068)
This is a pair of (2) White rear wheels from Tamiya for their Hotshot, Boomerang and Super Sabre Vehicles.
Treat your old car with some new parts
Tamiya Design Knife Blades (30) FOR 74020 (TAM 74074)
This is a packet of (30) blades from Tamiya .
A Tamiya favourite
Tamiya Parts (Bumper): Grasshopper, Frog and many others (TAM 0445007)
This is a very common bumper from Tamiya supplied with lots of their RC Kit.
This bumper fits the following Tamiya kits:
This bumper fits the following Tamiya kits:
- 47348: The Grasshopper Kit - Candy Green Edition
- 47413: Subaru Brat Blue Version
- 47438: Super Storm Dragon
- 47466: RTR Super Storm Dragon
- 47471: Grasshopper II Black Edition
- 49501: Grasshopper II (Super-G)
- 57741: RTR Hornet
- 57746: RTR The Grasshopper
- 57756: RTR The Frog
- 57781: RTR Rising Fighter
- 57828: RTR Fast Attack Vehicle 2011
- 57842: RTR Fast Attack Vehicle - w/Shark Mouth
- 57932: RTR Wild One 'Block Head Motors'
- 58036: Audi Quattro Rally
- 58037: Opel Ascona 400 Rally
- 58038: Subaru Brat
- 58040: Lancia Rally
- 58041: Frog
- 58043: Grasshopper
- 58045: Hornet
- 58046: Fast Attack Vehicle (FAV)
- 58050: Wild One
- 58074: Grasshopper II
- 58124: Super Hornet
- 58336: Hornet (Re-Release)
- 58346: Grasshopper (Re-Release)
- 58354: The Frog (Re-Release)
- 58384: Subaru Brat (Re-Release)
- 58416: Rising Fighter
- 58496: Fast Attack Vehicle 2011
- 58525: Wild One
- 58539: Fast Attack Vehicle - w/Shark Mouth
- 58643: The Grasshopper II (2017)
- 58695: Wild One 'Block Head Motors'
- 84237: Subaru Brat Metallic Special
- 84331: The Grasshopper Kit - Candy Green Edition
- 84383: The Hornet Black Metallic
- 84384: RTR The Hornet Black Metallic
- 84416: Grasshopper Black Edition
- 92018: Grasshopper II (Super-G)
This is a very common Tamiya bumper
Tamiya Motor Connector Plugs (10) (TAM 50245)
This is packet of (10) Tamiya Snap Connectors For 540 Brushed Motor.
This RC Snap Connector Set is used for Tamiya cars that come with 540, brushed type electric motors, and ESC's (Electronic Speed Controls), but can also be used on other brand motors.
The connectors in this set can be used to replace worn out connectors.
Key Features:
- For: 540 Brushed Motor
- Material: Metal / Rubber
- Color: Silver
What's In The Box?
- 10 Male connectors
- 10 Male rubber boots
- 10 Female connectors
- 10 Female rubber boots
Includes enough for 5 motors
Out of Stock
$9.95 Inc Tax
Tamiya Putty White (32g) (TAM 87095)
This is a 32 gram tube of White Putty from Tamiya.
The currently available Tamiya Putty (Basic Type) has long been praised by modellers for its high quality and ease of use. However, it's gray color sometimes made painting over it with a lighter color difficult. Tamiya now provides modellers with a white-colored putty to solve this problem.
Useful for filling holes and seam lines, this versatile putty can be used on plastic, wood, or metal, and can also be diluted with lacquer thinner for a wide range of applications.
Each aluminum tube contains 32 grams of putty.
The currently available Tamiya Putty (Basic Type) has long been praised by modellers for its high quality and ease of use. However, it's gray color sometimes made painting over it with a lighter color difficult. Tamiya now provides modellers with a white-colored putty to solve this problem.
Useful for filling holes and seam lines, this versatile putty can be used on plastic, wood, or metal, and can also be diluted with lacquer thinner for a wide range of applications.
Each aluminum tube contains 32 grams of putty.
Useful for filling holes and seam lines
Tamiya Polishing Compound (Coarse) (22g) (TAM 87068)
This is a 22 gram tube of Coarse Polishing Compound from Tamiya.
This paste polishing compound was developed specifically for use on plastic models.
Relatively large particles - in combination with the paste - are highly effective when smoothing out any rough finishes on your model's surface, and it can be washed away using water when the job is finished.
Great for use before painting, plus on clear or metal parts.
This paste polishing compound was developed specifically for use on plastic models.
Relatively large particles - in combination with the paste - are highly effective when smoothing out any rough finishes on your model's surface, and it can be washed away using water when the job is finished.
Great for use before painting, plus on clear or metal parts.
Can be washed away using water
Tamiya Polishing Compound (Fine) (22g) (TAM 87069)
This is a 22 gram tube of Fine Polishing Compound from Tamiya.
This paste polishing compound was developed specifically for use on plastic models.
This paste polishing compound uses small particles for the kind of finely-polished, smooth surface that is required before applying your model's topcoat.
It can also be used to clear up any scratches on transparent parts. and it can be washed away using water when the job is finished.
This paste polishing compound was developed specifically for use on plastic models.
This paste polishing compound uses small particles for the kind of finely-polished, smooth surface that is required before applying your model's topcoat.
It can also be used to clear up any scratches on transparent parts. and it can be washed away using water when the job is finished.
Can be washed away using water
Tamiya Screw Bag C: Black Foot (TAM 9465160)
This is the screw bag 'C' from Tamiya for their Black Foot vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Midnight Pumpkin (TAM 9465273)
This is the screw bag 'A' from Tamiya for their Midnight Pumpkin vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Striker (TAM 9465172)
This is the screw bag 'A' from Tamiya for their Striker vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Sonic Fighter (TAM 9465275)
This is the screw bag 'B' from Tamiya for their Sonic Fighter vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag A: Sonic Fighter (TAM 9465274)
This is the screw bag 'A' from Tamiya for their Sonic Fighter vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Screw Bag B: Ferrari F189 (TAM 9465355)
This is the screw bag 'B' from Tamiya for their Ferrari F189 vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Spur Gear and Counter Gear: M-07 Concept (TAM 51601)
This is the Spur Gear and Counter Gear from Tamiya for their M-07 Concept Chassis.
M-07 Spur Gear and Counter Gear
Tamiya Masking Tape (1mm) (TAM 87206)
This is an 18 meter roll of 1mm wide masking tape from Tamiya developed specifically for plastic models.
Features:
Features:
- This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces.
- At just 1mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs.
- Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it.
- Plastic core ensures minimal dust is produced.
- Length: 18m
- Width: 1mm
18m roll of 1mm masking tape
Tamiya Masking Tape (2mm) (TAM 87207)
This is an 18 meter roll of 1mm wide masking tape from Tamiya developed specifically for plastic models.
Features:
Features:
- This is dedicated masking tape developed for plastic models.
- Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces.
- At just 2mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs.
- Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it.
- Plastic core ensures minimal dust is produced.
- Length: 18m
- Width: 2mm
18m roll of 2mm masking tape
Tamiya Masking Tape (3mm) (TAM 87208)
This is an 18 meter roll of 3mm wide masking tape from Tamiya developed specifically for plastic models.
Features:
Features:
- This is dedicated masking tape developed for plastic models.
- Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces.
- At just 3mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs.
- Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it.
- Plastic core ensures minimal dust is produced.
- Length: 18m
- Width: 3mm
18m roll of 3mm masking tape
Tamiya 3x55mm Screw Pins: M-05 Ver.II PRO (4) (TAM 9805757)
This is a packet of (4) 3x55mm Screw Pins from Tamiya for their M-05 Ver.II PRO Chassis.
Fits M-05 Ver.II PRO
Tamiya Coil Spring: M-05 (2) (TAM 9805826)
This is a packet of (2) Coil Springs from Tamiya for their M-05 Chassis vehicles.
Shock Spring
Out of Stock
$5.95 Inc Tax
Tamiya 1/10 Body Clips - Black (10x Large) (5x Small) (TAM 50197)
This is a packet of (10) Large 1/10 Body Clips from Tamiya.
Replace lost body clips
Tamiya 3x18mm Step Screws (2): TT02 (TAM 9805573)
This is a packet of (2) 3x18mm Step Screws from Tamiya used as steering pivots on their TT02 range of kits
TT02 Steering pivots
Tamiya Steering Boot and Clip: Bigwig (TAM 6255004)
This is a Steering Boot and Clip Set from Tamiya for their Bigwig kitset.
Packet Includes:
Packet Includes:
- 1x Steering boot
- 1x Steering boot clip
Maintenance time for your Bigwig?