Tamiya

• 1/10 scale R/C model assembly kit. Length: 430mm, width: 243mm, height: 157mm. Wheelbase: 275mm.
• The lightweight, durable 0.7mm thick polycarbonate body depicts the form of the Egress - a successor to the famed Avante - with 1.0mm thick polycarbonate wing and under guard.
• Polycarbonate body, wing, etc. require painting with separately sold Tamiya Color paints for polycarbonate.
• This kit also features dark titanium color anodized front/rear damper cylinders and front uprights, plus new color stickers and silver color wheels.
• Required to complete: 2-channel radio, steering servo, ESC, motor, 7.2-7.4volt battery with charger, and Tamiya PS paint.

• 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm.
• Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength.
• Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion.
• Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction.
• 4-wheel double wishbone suspension has metal shafts for great customizability.
• Aluminum front uprights.
• Spike tires are mounted on fluorescent pink wheels.
• Comes with a 25-Turn motor featuring a special label.
• Requires: 2-Channel Radio, servo, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint.

• Equipped with metal front under guard. Knuckle mechanism is just like that on an actual truck.
• Highly-durable front & rear die-cast metal wheel hubs.
• A planetary gear ensures optimum ratios while a metal dog clutch, shift forks, and plastic gears combine to deliver smooth gear changes.
• Durable, lightweight die-cast aluminium front/rear axle housings are equipped with differentials.
• Power is delivered from the transmission to the front wheels via universal drive shaft.
• An abundance of metal parts is incorporated for a high level of realism.

• 4-Channel radio system
• Servo
• Electronic Speed Controller
• 540 Motor
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

This is a re-release of the iconic Egress 4WD off-road racing buggy.

The Egress first appeared in 1989. It was a follow up kit to the Avante kit, which had a huge fan following. The original Egress featured stacks of special racing parts. The Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with available battery and motor technologies available in the hobby market today.

Shaft Drive 4WD!
This shaft-driven 4WD chassis features a longitudinally positioned motor and full ball bearings, while carbon fiber upper and lower decks ensure that the model has superb strength. Re-designed front and rear ball differentials offer excellent reliability and easy maintenance, working in tandem with the built-in center one-way to provide sure-footed movement. The one-way bearing is lockable as a set up option. Universal drive shafts feature the same design as those used in the current TRF series parts, to maximize power transmission and improve resistance to wear and tear. 4-wheel double wishbone suspension, supported by four oil dampers equipped with aluminum cylinders, while the front and rear of the model is equipped with stabilizers for enhanced corning performance. Aluminum front uprights offer excellent reliability, and ball bearings in steering linkage arms combine with 2mm thick carbon fiber plate to offer a linear steering response.

Key Features:

• Carbon Fibre Double Deck Frame
• Re-Release of the Iconic 4WD Performance Kit!
• Shaft-Driven 4WD
• Newly-designed ball diffs are employed front and rear, and combine with a center one-way for sure-footed traction.
• The 4-wheel double wishbone suspension is fitted with high-capacity oil dampers for excellent performance off-road.
• The Egress enjoys a wheelbase 15mm longer than that of the Avante, and features carbon fiber upper/lower decks for stability.
• Polycarbonate Body and Under tray
• Front & Rear Ball Differentials + Center One-Way
• 3-Piece Steering Tie Rod
• 4-Wheel Double Wishbone Suspension

What's In The Box?

• (1) 1/10 Egress Off-Road Buggy 4WD Kit
• Polycarbonate Body
• Decal Sheet
• Instructions Manual

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Motor
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm.
• Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength.
• Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion.
• Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction.
• 4-wheel double wishbone suspension has metal shafts for great customizability.
• Aluminum front uprights.
• Spike tires are mounted on fluorescent pink wheels.
• Comes with a 25-Turn motor featuring a special label.
• Requires: 2-Channel Radio, servo, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint.

What's included in the box?
1 x Tamiya Limited Edition Black Special Avante 2011 Off-Road Buggy Kit

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

Specifications:
Length: 16.5" (420mm)
Width: 9.4" (240mm)
Height: 4.5" (140mm)
Wheelbase: 10.2" (260mm)
Tread: 7.9" (200mm) distance from wheel centers, left to right
Gear Ratio: 1:8.33
Minimum Ground Clearance: 1.6" (40mm)
Weight: 2.9lbs (1300g)
Length: 13" (330mm)
Width: 5.9" (150mm)
Height: 2.4" (61mm)

• 1 x Tamiya Avante 2011 Off-Road Buggy Kit

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• Length: 420mm
• Width: 240mm
• Height: 140mm
• Wheelbase: 260mm
• Tread F/R: 200mm
• Tire Width/Diameter: 38/88mm
• Chassis: 2mm Thick Carbon Double Deck
• Longitudinally-Placed Motor Shaft-Driven Full-Time 4WD
• Diff Gear F/R: Planetary, Center: Ball Diff
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front & Rear Oil Dampers
• Gear Ratio＝8.33:1
• Type 540 Motor (25T)

• The TD2 layout has the motor installed midships, while the battery pack in a position toward the rear to aid with traction.
• A hi-torque servo saver comes included as standard, and helps actuate the steering via a three-piece tie-rod setup.
• Smooth front inboard suspension has suspension arms with a 25-degree skid angle and CVA oil dampers at a similar gradient.
• Upper "I" and lower "H" arms are employed in the front suspension. Turnbuckle shaft upper arms allow swift adjustment of camber.
• The rear suspension setup features a combination of lower "H" arms and upper turnbuckle shafts.
• The motor is attached in a transverse position to the rear of the battery pack, providing power to a drivetrain with 3 gears.
• A ball differential is housed in the sealed gearbox. Steel joint cups secure the durability needed for a demanding off-road drive.
• CVA oil dampers have red springs in keeping with the livery theme of the stylish Astute 2022.
• Black star dish design wheels are paired with sturdy hex hub nuts and front ribbed tires for superior directionality.
• At the rear, black star dish wheels are used in combination with square spike tires to give the model plenty of bite.
• Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders.
• The cockpit is a particular highlight, with an aircraft-inspired canopy and a driver figure installed inside for superb realism.
• Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. This image shows low types.
• Front polycarbonate mini-fenders are screw-attached to their upright. Blue sections are taken care of with stickers.
• If you like, side pontoon front sections can be left unpainted to provide a window into the car's inner workings!

• Transmitter/Receiver
• 540 Type Motor
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.
• Polycarbonate body (inspired by the Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of Znug Design.
• Newly designed shaft-driven 4WD chassis based on a one-piece monocoque frame. It features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
• The TD4 chassis also employs a front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
• The four-wheel double wishbone suspension system uses CVA oil dampers for fun performance.
• Features full ball bearings.
• Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
• Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
• Star dish wheels are paired with square spike tires which offer good grip off-road.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure for extra realism, and high-torque servo saver.
• Requires: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• 540 type motor
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

One of the most popular pick-up trucks of all time, the Toyota Hilux.

Tamiya spared no expense in developing this truck to be the most realistic ever, with a ladder frame chassis and 4WD system just like the actual truck. The 3-speed transmission provides lots of enjoyable driving options and a plethora of metal parts such as the front guard, leaf springs, and aluminum friction dampers make for a very interesting assembly kit.

The large diameter tires provide impressive ground clearance and enhances the realistic resin body's muscular look. Metal-plated parts for the roll bar, front grill, front/rear bumpers, and muffler provide extra detail highlights throughout the model as well.

To top off this unique model, parts for a surfboard are also included.

features:

• Front Styling: Headlights and turn signals can be recreated using separately available LEDs. Maker emblems are recreated with metal-transfer markings.
• Roll Bar Lights: Metal-plated roll bar features 5 light positions, into which LEDs can be installed.
• Front Guard with Fog Lights: Front guard features fog lights, which can be modeled with either light covers on or off.
• Realistic Metal-Plated Wheels: Newly-designed 3-piece 5-spoke wheels feature a stylish gun metal color.
• Rear Styling: Highly accurate injection-molded resin body features lots of metal-plated parts such as the muffler. LEDs can also be installed for realistic taillights.
• 3 Types of Surfboard Markings: Choose from 3 different kinds of markings to create your own custom surfboard
• Metal Leaf Springs: Realistic leaf springs are made from 5 individual panels and can be easily adjusted after assembly.
• Differential: Differential features tough metal diff gears and can be locked to provide awesome off-road ability.
• 3-Speed Transmission: 3-speed transmission provides excellent low speed performance and realistic gear changes. A slipper clutch protects the gears from shocks to ensure smooth operation.

• Length: 508mm
• Width: 216mm
• Height: 270mm
• Weight: Approx. 3.1kg
• Motor: Type RS540
• Drivetrain: Shaft-driven 4WD
• Diff. Gear: Front/Rear 2-bevel Diff
• Suspension: Front/Rear Leaf Rigid
• Dampers: Front/Rear Friction Dampers
• Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top)

Tamiya Hilux truck with friction shocks, 540 motor, surfboard,
molded White body, window section, body trim, decals, plastic light
lenses, tires, wheels, 16 tooth pinion gear, 54 tooth spur gear
instructions

Needed To Complete:
 

• 4 Channel Radio and Receiver
• Standard Size Servo for steering and Gear Changing Servo
• ESC which is 540 brushed motor compatible
• 7.2V NiMH Battery with standard Tamiya connector
• Charger for Battery
• Paint and Building equipment

• Length: 492mm
• Width: 216mm
• Height: 220mm
• Weight: Approx. 3.1kg
• Motor: Type RS540
• Drivetrain: Shaft-driven 4WD
• Diff. Gear: Front/Rear 2-bevel Diff
• Suspension: Front/Rear Leaf Rigid
• Dampers: Front/Rear Friction Dampers
• Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top)
• Speed Controller: ESC

• 4-Channel radio system
• 2x Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• TS Paint and tools

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Motor
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Length: 500mm
• Width: 216mm
• Height: 238mm
• Weight: Approx. 3.1kg
• Motor: Type RS540
• Drivetrain: Shaft-driven 4WD
• Diff. Gear: Front/Rear 2-bevel Diff
• Suspension: Front/Rear Leaf Rigid
• Dampers: Front/Rear Friction Dampers
• Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top)
• Speed Controller: ESC

• 4-Channel radio system
• 2x Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• TS Paint and tools

• Plated wheels are a hex hub design, and are paired with front ribbed and rear square spike tires.
• Front double-wishbone suspension uses A arms with 25 degrees of caster, and cushioned by oil dampers.
• The motor is positioned at the rear of the BB-01 chassis. Rear trailing arm suspension alignment is adjustable.
• The battery pack is located along the chassis centerline. Remove the nose cowl and stopper pin to access it.
• A busy and realistic cockpit area features a driver figure, light pods and safety nets.
• Remove the rear roll cage screws and it swings up to give access to the motor.
• The BB-01 chassis offers great suspension stroke and tread, making it the perfect off road partner.
• A flat underbelly helps minimize problems with rough off road surfaces.
• Why not buy a separately sold spare tire and fit it on the rear when you're not driving the BBX?

• 2-channel radio
• steering servo
• ESC
• 7.2-7.4volt battery
• charger

• 1/10 scale 2WD R/C model assembly kit.
• 2.5mm thickness FRP chassis gives a low center of gravity for excellent balance.
• The battery pack position has been slightly enlarged. Note: This kit is not compatible with square-shaped battery packs. Rounded profile battery packs must be used.
• 4-wheel double wishbone suspension employs CVA oil dampers.
• Sealed gearbox features TTC, which was Tamiya's first slipper clutch and protects gears from impacts and gives stable drive by limiting wheelspin. Externally the same as on the original, it features a modernized internal design and can be adjusted simply by removing the gearbox cover and turning the lock nut.
• Efficient 0.5 module gear included.
• A low-profile servo is required for this model.
• High-traction front rib-spike and rear square spike tires provide superb response and impressive cornering.
• Comes with a durable and lightweight polycarbonate body and rear wing, plus a protective under cowl.

• 2-channel radio
• steering servo
• ESC
• 7.2-7.4volt battery
• charger
• Paint

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

Chassis: Bathtub type monocoque
Drive: Four wheel
Motors: Two 540 brushed
ESC: TEU-160BK
Gearboxes: Sealed, equipped with bevel gear differentials
Shocks: Eight plastic body friction (not oil-filled)
Body: Plastic, molded in white with metal plated plastic parts for grille, air intake and bumper
Tires: 6.5" (165mm) diameter, 4.3" (110mm) wide, split vee type tread
Wheels: Chrome plated plastic 2.7" (69mm) diameter, 3.7" (94mm)wide
Steering: Four wheel
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis.
Camber: Non-adjustable

Package Includes:

Super Clod Buster Pickup Truck Kit, two Motors, ESC, Body, Tires, Wheels, Decals and Instructions

Needed to Complete:

• 2 Channel Radio and Receiver
• Standard Size High Torque Servo for steering
• 7.2V NiMH Battery with standard Tamiya connector
• Charger for Battery
• Paint and Building equipment

Specifications:

Vehicle-
Length: 18.9" (480mm)
Width: 14.9" (380mm)
Height: 13.4" (340mm)
Weight: 8.73lbs (3960g)

Body-
Length: 17" (432mm)
Width: 6.8" (173mm)
Height: 4.8" (121mm)

• 1/12 scale R/C model assembly kit. Length: 337mm, width: 250mm, height: 236mm. Wheelbase: 174mm.
• This model recreates the Land Cruiser 40 Pick-Up equipped with 3-sided track units in place of tires.
• These track units offer superlative traction compared to tires but also enable the model to run even on snow, sand, mud and other testing conditions with stable traction.
• The model is based upon the gear-driven 4WD GF-01FT chassis featuring a monocoque frame with power provided by the centrally-positioned motor via front/rear differential gears.
• "Square" layout with similar wheelbase and tread measurements provides unique performance.
• Choose between two types of track links; standard flat designs, and toothed grouser designs.
• A lightweight, polycarbonate body, and driver figure included.
• Type 540 motor included.
• Requires: ESC, 2-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit.
• The TA06 Rear Ball Differential Set (Item 54306) utilizes twelve 3/32-inch balls to give superb stability.
• Includes carbon fiber components such as battery holders and body mount base (Item 54908).
• M-08 Concept Reinforced K Parts (Gearbox) (Item 54983) give sturdier gearbox and steering setups, for more efficient drive and improved steering feel.
• Comes with the dedicated chassis weight (20g).
• Features hex head screws.
• M-07 Concept Reinforced D Parts (Suspension Arms) (Item 54811) featuring carbon fiber-reinforced resin allow superior cornering ability.
• Durable, lightweight aluminum turnbuckle shafts (3x18mm; Item54247, 3x23mm; Item 54248, and 3x32mm; Item 54249) allow adjustment of length without removing adjusters.
• Includes a blue anodized finish version of the TRF Super Short Big Bore Dampers+ (4pcs.) (Item 42355).
• The 1.3mm diameter damper pistons (x3) give smooth oil flow and facilitate more flexible suspension.
• Requires: 2-channel radio, steering servo, ESC, 540-motor, 7.2-7.4volt battery pack with compatible charger, M-chassis 60D tires, and M-chassis body set.

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• 540 Motor
• Battery
• Charger
• M-Chassis Body
• M-chassis tires
• Paint
• AA Batteries for Transmitter

• 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.
• Polycarbonate body (inspired by the Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of Znug Design.
• Newly designed shaft-driven 4WD chassis based on a one-piece monocoque frame. It features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
• The TD4 chassis also employs a front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
• The four-wheel double wishbone suspension system uses CVA oil dampers for fun performance.
• Features full ball bearings.
• Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
• Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
• Star dish wheels are paired with square spike tires which offer good grip off-road.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure for extra realism, and high-torque servo saver.
• Requires: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• 540 type motor
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

The Bigwig is back!
This is a 2017 version of the shaft-driven 4WD buggy that was released to commemorate 10 years of Tamiya R/C models back in 1986. It features several updates while keeping largely to the classic design of the original. The slimline body, designed and penned in 1986 by famed Japanese designer Takuya Yura, is still a classic today, as it possesses advanced aerodynamics thanks to his encyclopedic design knowledge. Updated markings retain the flavor of the original Bigwig and include the Mooncraft logo of Yura's design company.

Body design: Takuya Yura
Takuya Yura is a highly regarded Japanese designer, active in many fields and known particularly for his racing car designs. He is President of the Mooncraft company.

King of the Off-Road
The extremely stable shaft-driven 4WD drive train has excellent efficiency thanks to full ball bearings, while differential gears ensure cornering is smooth. 4-wheel independent double wishbone suspension employs A-shaped front and H-shaped rear arms for excellent durability, with CVA oil dampers for high-quality suspension stroke. Dish wheels are not just aesthetically pleasing, but also practical on the off-road surfaces the Bigwig (2017) calls home; they are paired with grippy oval bock tires. The rack and pinion steering setup remain unique to the Bigwig among Tamiya R/C cars.

Specifications:

• Length: 390mm
• Width: 235mm
• Height: 140mm
• Tire width/diameter: 30mm/88mm (front), 38mm/88mm (rear)
• ABS resin bathtub frame
• Shaft-driven 4WD
• 3-bevel differential gears
• 2-piece steering tie-rod
• 4-wheel independent double wishbone suspension
• CVA oil dampers x 4
• Selectable gear ratio = 8.7:1 or 10.04:1
• Motor Type: GT-Tuned Motor (25T)
• Electronic speed controller (ESC) is sold separately.

What's In The Box?

• 1/10 BigWig Off-Road Buggy 4WD Kit
• Decal Sheet
• Instructions Manual

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• Paint
• Tools to assemble

• The rear bed is molded in the same yellow as the chassis, perfect for this depiction of a construction vehicle!
• The lightweight polycarbonate cabin section comes pre-painted in Camel yellow and Gun metal, and cut out, too.
• A dedicated bumper meshes nicely with the polycarbonate cabin, helping to protect from any major bumps.
• The G6-01 chassis is based around a slimline monocoque, with a two-piece steering tie-rod for excellent response.
• 6-wheel double wishbone suspension ensures superior off-road performance in conjunction with 6-wheel drive.
• The battery pack is inserted longitudinally, and held securely in place by the model's rear bed.

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• The distinctive boxy lines of the Mercedes-Benz G 500 are recreated in style, molded in lightweight and durable polycarbonate.
• Metal-plated components are used in the depiction of the front grille and light cases, endowing the model with a further touch of realism.
• Separately molded side mirror parts accurately recreate their full size counterparts and are finished using paint and stickers.
• Take a close-up look at the silver color matte plated seven-spoke wheels, which are paired with block pattern tires for super grip.
• The roof section of the body has a depiction of the sunroof, and masking stickers are included to cover it and other windows when painting.
• Separately molded in tough polycarbonate-ABS plastic, the spare tire cover features a plated emblem for a highly authentic finish.
• The ladder frame is modeled upon those employed by full-size cars, and offers excellent rigidity on this 1/10 scale vehicle.
• Front and rear axle housings are connected to four links arms each, which combine with oil dampers for superlative cushioning.
• Changing gear layout and using separately-sold pinions of nine other sizes allows a range of twenty gear ratios between 11.09 and 29.28:1.
• Metal chassis frame sections facilitate exemplary durability, while CVA oil damper ensure that you get the maximum off-road performance.
• Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

Specifications:

• 2 Channel Transmitter/Receiver
• Electronic Speed Control
• Servo
• Paint
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.
  
• 1997 Mercedes-Benz CLK-GTR is recreated in lightweight and durable polycarbonate.
  
• Separately molded white ABS plastic parts recreate side mirrors and rear wing.
  
• Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)
  
• TC-01 chassis
  
• The durable and composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.
  
• 4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.
  
• Use spacers and shims to easily alter camber, skid, and toe angle settings.
  
• Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
  
• Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs.

• 2 Channel Transmitter/Receiver
• Electronic Speed Control
• Low Profile Servo (Note: Standard Size Servos cannot be used),
• Paint
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit. Length: 425, width: 247mm.
• The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) and with Smoke (PS-31) painted windows. Separate plated parts recreate grille cover, fog lamps and roll bar.
• The TT-02FT is a variant of the TT-02 chassis, with four tracks on its suspension.
• Each of the three-sided track units is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from link parts, and offer efficient traction.
• Two types of elastomer track link (standard and grouser) are included for setup options.
• Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance.
• Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered during off-road driving.
• TT-02 four-bevel differentials and identical suspension arms are used.
• Includes 540-brushed type motor.
• Requires: ESC, 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

Specifications:
• 1/10 scale R/C assembly kit. Length: 390mm, width: 235mm, height: 150mm.
• Polycarbonate body (0.7mm thickness) of the Hotshot II is pre-cut and pre-painted in brilliant blue. (Cutlines and marks to make holes added from the original Hotshot II (Item 58062) body.)
• New roll cage positioned higher to ensure raised driver position for more realism. Following this matter, upper frame also updated.
• Uprights and wheels are matte-finish metal-plated.
• Includes new stickers designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS.”
• Number plates, light pods, side plates, window nets and dummy antenna included.
• 4-wheel double wishbone suspension uses one front transverse and two rear CVA II oil dampers.
• Includes 540-type brushed motor

This R/C model assembly kit is a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987. The sleek, smart body and rear wing are polycarbonate and pre-painted black, as well as being pre-cut. Stickers are included to apply racy orange and yellow markings.

Durable 4WD Buggy Chassis
The Hotshot II has a shaft-driven 4WD chassis with sealed gearboxes front and rear to keep out dirt and sand; each has a differential inside for smooth cornering, while the underside of the model is protected by the underguard. Its 4-wheel independent double wishbone suspension employs three CVA oil dampers - one at the front and two at the rear, with a front stabilizer helping to get the most out of the 4-wheel drive. White dish design wheels are paired with semi-pneumatic oval block tires for exemplary grip on tough off-road surfaces.

Features include:

• The Hotshot II wedge body design is a classic!
• Red front upright parts really catch the eye.
• The front monoshock suspension uses a single CVA oil damper, which artfully keeps chassis roll in check.
• The metal roof has an integrated air intake, while a driver figure is included to use in the cockpit.
• The rear uses H-shaped arms top and bottom. Dog bone drive shafts are a reliable design.
• Each rear wheel has a CVA oil damper, which help the Hotshot II pick its way across challenging off-road surfaces.
• Dish wheels are of a different width front and rear, each with its own size of oval block tire.
• Like the body, the rear wing is pre-painted black polycarbonate, pre-cut for your convenience!

Specifications:

• Length: 390mm
• Width: 235mm
• Height: 160mm
• Wheelbase: 265mm
• Tire width/diameter: 31/88mm (front); 38/88mm (rear)
• Tread: 205mm (front); 200mm (rear)
• ABS monocoque frame
• Shaft-driven 4WD
• 3-bevel differential gears
• 2-piece steering tie-rod
• 4-wheel independent double wishbone suspension
• CVA oil dampers
• Selectable gear ratio = 10.04:1, 8.70:1, 8.16:1, 7.68:1
• Type 540 motor
• Electronic speed controller (ESC) is sold separately.

What's In The Box?

• 1/10 Hotshot II Off-Road Buggy 4WD Kit
• Painted Polycarbonate Body
• Decal Sheet
• Instructions Manual

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

As Super As Ever
Tamiya originally released a special version of the R/C 4WD racing buggy Hotshot in 1986. This famous machine is set for a return as the Super Hotshot and features modern improvements while keeping the basic layout of the original. Distinctive external features such as the stylish silver body and rear wing, yellow oil dampers, and spiked tires with gold metal-plated wheels have also been kept.

Modern Updates
The chassis maintains original features of the Super Shot, including the durable ABS monocoque frame, roll cage, and under guard. At the same time, full ball bearings minimize friction loss as power from the horizontally-mounted motor is transmitted to all four wheels via dog-bone type drive shafts. 4-wheel double wishbone suspension is equipped with oil dampers which allow 3 adjustable spring tensions to match track conditions. In addition, a GT-Tuned Motor (25T) provides plenty of power for dynamic off-road driving.
 

Specifications:

• Length: 390mm
• Width: 235mm
• Height: 150mm
• Tire width/diameter: 31/88mm (front); 38/88mm (rear)
• Tread: 205mm (front); 208mm (rear)
• ABS monocoque frame
• Shaft-driven 4WD
• 3-bevel differential gears
• 2-piece steering tie-rod
• 4-wheel independent double wishbone suspension
• CVA oil dampers
• Selectable gear ratio = 8.1:1 or 10.04:1
• Motor Type: GT-Tuned Motor (25T)
• Electronic speed controller (ESC) is sold separately.

What's In The Box?

• 1/10 Super Hotshot Off-Road Buggy 4WD Kit
• Decal Sheet
• Instructions Manual

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• Paint
• Tools to assemble

• The TD2 layout has the motor installed midships, while the battery pack in a position toward the rear to aid with traction.
• A hi-torque servo saver comes included as standard, and helps actuate the steering via a three-piece tie-rod setup.
• Smooth front inboard suspension has suspension arms with a 25-degree skid angle and CVA oil dampers at a similar gradient.
• Upper "I" and lower "H" arms are employed in the front suspension. Turnbuckle shaft upper arms allow swift adjustment of camber.
• The rear suspension setup features a combination of lower "H" arms and upper turnbuckle shafts.
• The motor is attached in a transverse position to the rear of the battery pack, providing power to a drivetrain with 3 gears.
• A ball differential is housed in the sealed gearbox. Steel joint cups secure the durability needed for a demanding off-road drive.
• CVA oil dampers have red springs in keeping with the livery theme of the stylish Astute 2022.
• Black star dish design wheels are paired with sturdy hex hub nuts and front ribbed tires for superior directionality.
• At the rear, black star dish wheels are used in combination with square spike tires to give the model plenty of bite.
• Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders.
• The cockpit is a particular highlight, with an aircraft-inspired canopy and a driver figure installed inside for superb realism.
• Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. This image shows low types.
• Front polycarbonate mini-fenders are screw-attached to their upright. Blue sections are taken care of with stickers.
• If you like, side pontoon front sections can be left unpainted to provide a window into the car's inner workings!

• Transmitter/Receiver
• 540 Type Motor
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit. Updated version of the Super Sabre, a beginner-friendly buggy originally released in 1987. Length: 390mm, width: 234mm, height: 135mm.
• The 0.7mm thick polycarbonate is fitted with the separate wing part and is pre- cut and pre-painted in silver.
• Shaft-driven 4WD.
• 4-wheel independent double wishbone suspension employs CVA short dampers II with a front stabilizer to help get the most out of the 4-wheel drive system.
• ABS bathtub frame and other reinforced parts give superb durability and simplified maintenance.
• Gearboxes are sealed to keep out dirt and contain differentials for smooth cornering.
• The body requires the application of stickers, cutting and painting of figure and other work.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• The Monster Beetle Trail offers immense traction that will take it over all kinds of obstacles.
• Molded in ABS plastic, the body offers plenty of detail. Metal-plated parts add another layer of realism.
• The front is adorned with triple auxiliary lamps, which are metal-plated parts with stickers for decoration.
• The dummy engine and muffler are also metal-plated parts. The body also features a sporty roll bar.
  Use the included putty in the gear differentials to help increase this model with superb traction.
• All wheels have hub reduction units, which slow down drive shaft output for greater torque.

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• Scale: 1/12
• Length: 400mm
• Width: 168mm
• Height: 139mm
• Wheelbase: 256mm
• Weight: 1,800g
• Type 540 Motor
• Rear-Wheel Drive
• Tire Width/Diameter: (F/R) 29/77mm
• Tread (F/R): 138mm
• Duralumin Frame Chassis
• 3-Bevel Differential
• 2-piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension with Metal Torsion Bar Springs
• Gear Ratio=9.3:1, 16:1, 21:1

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter
• Paint

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C assembly kit
• Length: 425mm
• Height: 140mm
• Width: 225mm
• Wheelbase: 255mm
• Tread (F/R): 190mm
• Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear)
• ABS Frame Chassis
• Polycarbonate Body
• Rear Motor, Rear-Wheel Drive
• 3-Bevel Differential
• F/R Single Trailing Arm Suspension　
• F/R Aluminum Oil Dampers
• Gear Ratio＝1:7.54, 1:9.05
• Type 540 Motor

Specifications:

• Adjustable Gear Ratio Yes
• Bearings Plastic bushing
• Body Material Polycarbonate
• Body Stickers Included
• Chassis Material ABS Plastic
• Construction Type Assembly Kit
• Differential Type Gear
• Drive Type 2WD
• Motor 540-brushed type
• Required To Complete 2-channel radio, steering servo, ESC, 7.2volt battery & battery charger
• Scale 1/10
• Shock Damper Oil-filled damper
• Suspension Fully Independent
• Terrain Use Off-Road

• 2-channel radio
• steering servo
• ESC
• 7.2-7.4volt battery
• charger

• 1/10 R/C assembly kit. Wheelbase: 267 mm
• Front/Rear tread: F: 223mm / R: 221mm.
• V-Block pattern Block Tires 122.8mm diameter.
• Gear Ratios: 18T (18.03:1), 20T (16.23:1), 17T (19.09:1) Kit is supplied with 18 tooth pinion gear.
• 4WS-four-wheel steering compatible with separately sold third-party 4WS function radio.
• Body post position same as long wheelbase CC-02 chassis.
• Includes 540 brushed type motor and ESC.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• Paint and tools

• Length: 395mm
• Width: 250mm
• Height: 145mm
• Weight (excluding R/C equipment and battery pack): 1,100g
• Tread: 207mm (Front & Rear)
• Bathtub-type Chassis Frame
• Shaft-Driven 4WD
• Front/Rear 3-Bevel Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Tire Width/Diameter: 40/84mm (Front & Rear)
• CVA Short Oil Shock Units
• Gear Ratio=8.59:1 (with kit-included 21T pinion gear)
• Type 540 Motor
• Electronic Speed Controller (Included)

1. Same 2WD chassis as used for ITEM# 58354 The Frog, with 4-wheel independent suspension and full ball bearings to handle tough off-road driving.
2. Comes with two body shells, one made of plastic material similar to the original BRAT for a nostalgic feel and one made from durable polycarbonate material (included).
3. Type 540 motor included.
4. Electronic Speed Control Unit (TBLE-02S) also included.

1. Improved re-release model of the subaru brat, which made its debut in 1983
2. Lightweight and durable abs space frame
3. Four wheel independent suspension
4. Differential gear for smooth cornering
5. Includes both realistic resin and lightweight polycarbonate bodies
6. Requires a 7.2V running battery (not included)
7. Requires a 2ch. radio control system
8. Model may vary from image on box
9. Use Tamiya color for painting resin body and Tamiya polycarbonate color for polycarbonate body (paint not included)

1. Transmitter/Receiver
2. Servo
3. Battery
4. Charger
5. AA Batteries for Transmitter
6. Paint

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• Paint
• Tools to assemble

• Front double wishbone and rear trailing arm setups are cushioned by high-performance CVA oil dampers.
• Space frame chassis incorporates a dust cover part to ensure that vital R/C equipment is protected.
• Universal drive shafts not only boost efficiency; they also minimize the risk of popping out when driving.

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale, highly detailed Wild Willy 2 body with WR-02 Chassis
• Detailed polycarbonate body shell (un-painted)
• Decals and masks included
• Powerful 540 type brushed motor
• Fully enclosed front and rear gearboxes equipped with differential gears for smooth cornering
• Large sized block tyres with realistic tread pattern
• 4-wheel double wishbone suspension and oil filled dampers for excellent shock absorption.

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L).
  
• Polycarbonate body pre-painted in White.
  
• Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps.
  
• Polycarbonate front and rear light cases are compatible with separately sold Tamiya 5mm LEDs.
  
• Stickers are included to recreate blue livery sections, sponsor logos and more.
  
• The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
  
• Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts.
  
• A host of Hop-Up Option parts are available to tune the MF-01X chassis.
  
• Tamiya Torque Tuned Motor included.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987. 
• Polycarbonate body is pre-cut & pre-painted in white and blue, with transparent canopy. (Body requires application of stickers, assembly and painting of figure, and other work.)
• ABS bathtub chassis.
• 4-wheel independent double wishbone suspension with CVA oil dampers uses front stabilizer for a superior ride. Kit includes CVA oil dampers II instead of Type I seen in the original release.
• The front and rear sealed gearboxes contain compact, durable die-cast 3-bevel differential gears for smooth performance.
• Semi-pneumatic spike tires.
• Contains separate rear wing (pre-painted in white).
• Includes a driver figure.
• Type 540 motor and ESC included.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

1. A fresh new take on a Tamiya legend - the Comical Grasshopper body is a real eye-catcher in lightweight polycarbonate.
2. A fresh new take on a Tamiya legend - the Comical Grasshopper body is a real eye-catcher in lightweight polycarbonate.
3. Rear poles and flags, plus rounded tires give the model a unique and bubbly look that just promises plenty of fun driving!
4. The WR-02CB chassis is based upon the proven WR-02. Hammer on the throttle for thrilling wheelies to impress your friends.
5. A smooth drive awaits with 4-wheel double wishbone suspension featuring long arms and CVA oil dampers with multiple positions.
6. The slim monocoque frame features longitudinal battery and central motor, with power transmitted by gears. Gearbox and motor are pre-assembled.
7. Side guards are there to protect the model in the event of a spill. The helmeted driver figure gives this model an extra dash of personality.
8. Floor the throttle and watch the model perform exciting wheelies thanks to the wheelie bar! Megaphone-style mufflers are a stylish design point.
9. The Comical Grasshopper is compatible with separately-sold 5mm LEDs and light unit, for a lit-up model that will truly look the part.

1. A fresh new take on a Tamiya legend - the Comical Frog body is a real eye-catching design in lightweight polycarbonate..
2. Rear poles and flags, plus rounded tires give the model a unique and bubbly look that just promises plenty of fun driving!
3. The WR-02CB chassis is based upon the proven WR-02. Hammer on the throttle for thrilling wheelies to impress your friends.
4. A smooth drive awaits with 4-wheel double wishbone suspension featuring long arms and CVA oil dampers with multiple positions.
5. The slim monocoque frame features longitudinal battery and central motor, with power transmitted by gears. Gearbox and motor are pre-assembled.
6. The kit features an assembly type figure with plenty of design options including five different styles of eye stickers.
7. Floor the throttle and watch the model perform exciting wheelies thanks to the wheelie bar! Megaphone-style mufflers are a stylish design point.
8. The Comical Frog is compatible with separately-sold 5mm LEDs and light unit, for a lit-up model that will truly look the part.

• Adjustable Gear Ratio Fixed
• Bearings Plastic bushing
• Body Material Polycarbonate pre-painted body
• Body Stickers Pre-Applied
• Chassis Material ABS Plastic
• Construction Type Expert-Semi-Assembled
• Differential Type Gear
• Drive Type 2WD
• Electronic Speed Control (esc) Included TEU-105BK ESC
• Motor 540-brushed type
• Scale 1/10
• Shock Damper Friction type
• Suspension Independent front/solid axle rear
• Terrain Use Multi-Purpose

• Transmitter/Receiver
• Steering servo
• Battery
• Charger
• AA Batteries for Transmitter

• Adjustable Gear Ratio Fixed
• Bearings Plastic bushing
• Body Material ABS Plastic pre-painted body
• Body Stickers Pre-Applied
• Chassis Material ABS Plastic
• Construction Type Expert-Semi-Assembled
• Differential Type Gear
• Drive Type 2WD
• Electronic Speed Control (esc) Included TEU-105BK ESC
• Motor 380-brushed type
• Scale 1/10
• Shock Damper Friction type
• Suspension Independent front/solid axle rear
• Terrain Use Multi-Purpose

• Transmitter/Receiver
• Steering servo
• Battery
• Charger
• AA Batteries for Transmitter

• Adjustable Gear Ratio Fixed
• Bearings Plastic bushing
• Body Material ABS Plastic pre-painted body
• Body Stickers Pre-Applied
• Chassis Material ABS Plastic
• Construction Type Expert-Semi-Assembled
• Differential Type Gear
• Drive Type 2WD
• Electronic Speed Control (esc) Included TEU-105BK ESC
• Motor 540-brushed type
• Scale 1/12
• Shock Damper Friction type
• Suspension Independent front/solid axle rear
• Terrain Use Multi-Purpose

• Transmitter/Receiver
• Steering servo
• Battery
• Charger
• AA Batteries for Transmitter

• Adjustable Gear Ratio Fixed
• Bearings Plastic bushing
• Body Material ABS Plastic pre-painted body
• Body Stickers Pre-Applied
• Chassis Material ABS Plastic
• Construction Type Expert-Semi-Assembled
• Differential Type Gear
• Drive Type 2WD
• Electronic Speed Control (esc) Included TEU-105BK ESC
• Motor 540-brushed type
• Scale 1/12
• Shock Damper Friction type
• Suspension Independent front/solid axle rear
• Terrain Use Multi-Purpose

• Transmitter/Receiver
• Steering servo
• Battery
• Charger
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).
• The body is breathtakingly recreated in durable, lightweight polycarbonate.
• Separately molded plastic components recreate side mirrors and rear wings.
• The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
• Polycarbonate light cases are compatible with separately sold 5mm LEDs.
• Stickers are included to recreate body details and logos.
• A host of Hop-Up Option parts are available to tune the MF-01X chassis.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup).
• The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases (*), and front- or rear- wheel drive system. Six setups are available in total.
• Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
• Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
• The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
• While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
• Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
  
• Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
  
• Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
  
• Includes 540 motor and ESC.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L)
• The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
• Features 60mm front and rear tires.
• This kit includes livery stickers to create a design inspired by the numerous amateur club racers.
• Includes 540-Type brushed motor.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• 1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).
• The body is breathtakingly recreated in durable, lightweight polycarbonate.
• Separately molded plastic components recreate side mirrors and rear wings.
• The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
• Polycarbonate light cases are compatible with separately sold 5mm LEDs.
• Stickers are included to recreate body details and logos.
• A host of Hop-Up Option parts are available to tune the MF-01X chassis.

• 2-Channel radio system
• Servo
• Electronic Speed Controller
• Battery
• Charger
• Paint
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• Battery
• Charger
• AA Batteries for Transmitter
• Paint
• Tools to assemble

• Beautifully detailed plated wheels and 70mm-diameter tires were designed just for this model.
• Engine, turbocharger and frame are succinctly depicted. Side mirrors, coupler, etc. are separately molded.
• Light cases for headlights are provided, and can be lit up with the aid of separately sold LEDs.
• The TT-01 Type-E chassis is a tried and tested unit that offers controllable shaft-driven 4WD. Plenty of Hop-Up option parts are available!
• The form of the tractor head is artfully depicted using a 4-piece polycarbonate body. Multiple stickers are included to recreate markings.

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• 540 Motor
• Paint
• Battery
• Charger
• AA Batteries for Transmitter

• Beautifully detailed plated wheels and 70mm-diameter tires were designed just for this model.
• Engine, turbocharger and frame are succinctly depicted. Side mirrors, coupler, etc. are separately molded.
• Light cases for headlights are provided, and can be lit up with the aid of separately sold LEDs.
• The TT-01 Type-E chassis is a tried and tested unit that offers controllable shaft-driven 4WD. Plenty of Hop-Up option parts are available!
• The form of the tractor head is artfully depicted using a 4-piece polycarbonate body. Multiple stickers are included to recreate markings.

• Transmitter/Receiver
• Servo
• Electronic Speed Controller
• 540 Motor
• Paint
• Battery
• Charger
• AA Batteries for Transmitter

• Transmitter/Receiver
• Servo
• Battery
• Charger
• AA Batteries for Transmitter

• Length:445mm
• Width: 184mm
• Height: 137mm
• Wheelbase: 257mm
• Tire Width/Diameter: 27/67mm
• Bathtub Type Chassis Frame
• Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD
• F/R 3-Bevel Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• F/R Friction Dampers
• Gear Ratio=8.35:1
• Type 540 Motor

• Electronic Speed Controller
• 2-channel R/C system
• Battery pack and charger
• Batteries for transmitter