Kyosho
Kyosho MINI-Z (M2) Aluminium Nylon Nuts (8) (Blue) (KYO KP MZW128BL)
This is a packet of (8) BLUE Aluminium Nylon Nut from Kyosho to fit their Mini-Z vehicles.
Replace plastic wheel nuts
Kyosho MINI-Z (M2) Aluminium Nylon Nuts (8) (Red) (KYO KP MZW128R)
This is a packet of (8) RED Aluminium Nylon Nut from Kyosho to fit their Mini-Z vehicles.
Replace plastic wheel nuts
Kyosho Dish Front Wheel (12mm Hex) (Yellow) (2) (56mm) (KYO KP OTH247Y)
This is a packet of (2) 56mm Yellow Dish Front Wheels from Kyosho for their Optima buggies.
Allows you to run modern size tires
Kyosho Dish Rear Wheel (12mm Hex) (Yellow) (2) (56mm) (KYO KP OTH248Y)
This is a packet of (2) 56mm Yellow Dish Rear Wheels from Kyosho for their Ultima and Optima buggies.
Allows you to run modern size tires
Kyosho Dish Front Wheel (12mm Hex) (White) (2) (56mm) (KYO KP OTH247W)
This is a packet of (2) 56mm White Dish Front Wheels from Kyosho for their Optima buggies.
Allows you to run modern size tires
Kyosho Dish Rear Wheel (12mm Hex) (White) (2) (56mm) (KYO KP OTH248W)
This is a packet of (2) 56mm White Dish Rear Wheels from Kyosho for their Ultima and Optima buggies.
Allows you to run modern size tires
Kyosho MINI-Z Low Height Slick Tire 30deg (4) (KYO KP MZW039-30)
This is a packet of (4) 30 degree Low Height Slick tires from Kyosho to fit their Mini-Z vehicles.
Full set of 4 tires
Kyosho MINI-Z Slick Tyres 30 Degrees (4) (KYO KP MZW002-30)
This is a packet of (4) 30 degree slick tires from Kyosho to fit their Mini-Z vehicles.
Full set of 4 tires
Kyosho MINI-Z Radial Tires 20 Degrees (KYO KP MZW037-20B)
This is a packet of (4) 20 degree Radial tires from Kyosho to fit their Mini-Z vehicles.
The tire to have for the CMR indoor series
The tire to have for the CMR indoor series
Full set of 4 tires
Kyosho MINI-Z Low Height Slick Tire 40deg (4) (KYO KP MZW039-40)
This is a packet of (4) 40 degree Low Height Slick tires from Kyosho to fit their Mini-Z vehicles.
Full set of 4 tires
Out of Stock
$15.00 Inc Tax
Kyosho MINI-Z Slick Tyres Wide 20 Degrees (KYO KP MZW017-20B)
This is a packet of (4) 20 degree Wide Slick tires from Kyosho to fit their Mini-Z vehicles.
Full set of 4 tires
Out of Stock
$15.00 Inc Tax
Kyosho MINI-Z Slick Tyres 40 Degrees (4) (KYO KP MZW002-40)
This is a packet of (4) 40 degree slick tires from Kyosho to fit their Mini-Z vehicles.
Full set of 4 tires
Kyosho Front and Rear Bulkhead Set: Ultima (KYO KP UT001)
This is a Bulkhead Set from Kyosho for the Ultima 2wd family of re-released buggies.
Packet includes:
Packet includes:
- 1x front bulkhead
- 1x rear bulkhead
- 2 steering spindles
May not fit the OG Ultima kits
Kyosho Hub Set: FZ02 (KYO KP FA503)
This is a Hub Set from Kyosho to fit their FZ02 Fazer Mk2 cars.
Fits the new Fazer Mk2
Kyosho Touring Car Suspension Arm: FZ02 (KYO KP FA551B)
This is a Touring Car Suspension Arm from Kyosho to fit their FZ02 Fazer Mk2 cars.
Fits the new Fazer Mk2
Kyosho Suspension Arm Set: Optima (KYO KP OT201B)
This is a Suspension arm set from Kyosho for the Optima 4wd buggy.
Also fits the original Optima kit.
Packet includes:
Also fits the original Optima kit.
Packet includes:
- 1 x front arm
- 1 x rear arm
Also fits the original Optima kit
Out of Stock
$14.95 Inc Tax
Kyosho Spur Gear Set 43T/39T: Nitro Tracker (KYO KP NT015)
This is a packet of (2) Spur Gears from Kyosho for their Nitro Tracker Kit.
Both 43T and 39T Spur Gears
Kyosho MINI-Z Slick Tyres 20 Degrees (4) (KYO KP MZW002-20B)
This is a packet of (4) 20 degree slick tires from Kyosho to fit their Mini-Z vehicles.
Full set of 4 tires
Kyosho 5 Spoke Wheel (White) (2): Optima (KYO KP OTH244W)
This is the packet of (2) White 5 spoke 43mm/1.7" wheels from Kyosho for their Optima 2016.
Package Includes:
Package Includes:
- 1x left wheel
- 1x right wheel
43mm/1.7" wheels
Kyosho MINI-Z Case with Accessories Tray (KYO KP MZW123)
This is a handy multiuse case with a MINI-Z logo from Kyosho.
Comes with an internal tray with separating plates for flexible space arrangement.
It can also be used as a storage/protection box for an on-road type MINI-Z (see below for maximum dimensions).
Technical Specifications:
- Dimensions: approx. 201 x 108 x 52mm
- Maximum MINI-Z size: approx. 187 x 95 x 48mm
Can store part or whole cars
Kyosho Suspension Arm Set: Optima (KYO KP OT201)
This is a Suspension arm set from Kyosho for the Optima 4wd buggy.
Also fits the original Optima kit.
Packet includes:
Also fits the original Optima kit.
Packet includes:
- 1 x front arm
- 1 x rear arm
Also fits the original Optima kit
Out of Stock
$14.95 Inc Tax
Kyosho Ball Differential Gear: Optima Mid / Ultima (KYO KP OTW101-01)
This is a Ball Differential Gear from Kyosho for their Optima & Ultima buggy.
Keep up your maintenance
Out of Stock
$14.95 Inc Tax
Kyosho Front Suspension Arm (1): Inferno ST-RR Evo (KYO KP IS005C)
This is a packet of (1) upper and lower front Suspension arms from Kyosho for their ST-RR Truggy Kits.
Includes upper and lower arms
Out of Stock
$14.95 Inc Tax
Kyosho Plastic Shock Parts: Optima Mid (KYO KP OT210BKB)
This is a packet of Plastic Shock Parts from Kyosho for the Retro Optima Mid 4wd buggy.
These optional shock parts are intended to add performance and durability to the Kyosho Optima.
Package includes one plastic shock parts tree and two cap head screws.
These optional shock parts are intended to add performance and durability to the Kyosho Optima.
Package includes one plastic shock parts tree and two cap head screws.
May also fit the original kits
Kyosho MINI-Z Servo Saver set: MR-03 (KYO KP MZ405)
This is a Servo Saver Assembly from Kyosho to fit their MR-03 Mini-Z vehicles.
Need to do some maintenance?
Kyosho Dish Wheel (Front) (Black) (2): Scorpion (KYO KP SCH001BK)
This is the packet of (2) Black Dish front wheels from Kyosho for their Scorpion RC kits.
Package Includes:
Package Includes:
- 1x left wheel
- 1x right wheel
black dish wheels
Out of Stock
$14.95 Inc Tax
Kyosho Heavy Duty Air Cleaner Filter Foams (4): MP777/ST-R (KYO KP IF334-1)
This is a packet of (4) Heavy Duty Air Cleaner Filter Foams from Kyosho to fit their Inferno MP777 Special 2 buggies and ST-R Truggies.
Fits the Kyosho MP777 & ST-R
Kyosho MINI-Z Pinion Gear Set (6T/7T/8T/9T) (KYO KP MZW119)
This is a Pinion Gear Set (6T/7T/8T/9T) from Kyosho to fit their Mini-Z vehicles.
Includes 4 pinions for tuning
Out of Stock
$14.00 Inc Tax
Kyosho Differential Bevel Gear Set: MP9 & MP10 (KYO KP IF402)
This is a packet of Differential Bevel Gear Set from Kyosho for their MP9 & MP10 1/8 Scale Buggy Kits.
Packet includes:
Packet includes:
- 2 x sun gears
- 4 x planetary gears
- 4 x washers
- 2 x cross pins
Keep differential operating smooth
Kyosho 5x7mm Clutch Shims (30) (KYO KP 96643)
This is a packet of (30) 5x7mm shims from Kyosho used for shimming the clutch bell bearings, and can be used with any brand of clutch system.
Packet includes:
Packet includes:
- 10 x 5x7x0.1mm shims
- 10 x 5x7x0.2mm shims
- 10 x 5x7x0.3mm shims
Includes 0.1mm, 0.2mm & 0.3mm shims
Out of Stock
$13.95 Inc Tax
Kyosho MINI-Z Rear Shock set: MR-02 / MR-03 (KYO KP MZ206B)
This is a Rear Shock set from Kyosho to fit their MR-02 and MR-03 Mini-Z vehicles.
Fits both MR-02 and MR-03
Kyosho Ball Ends (5.8mm) (Hard) (12) (KYO KP LA043H)
This is a Packet of (12) 5.8mm Hard Ball Ends from Kyosho.
Fits many models, check manual first
Out of Stock
$13.95 Inc Tax
Kyosho Manifold Gasket: Spada (KYO KP S09-170001)
This is a Manifold Gasket from Kyosho for their 1/12 Nitro Spada Race Kit.
Classic 1/12 Nitro Racer
Out of Stock
$12.95 Inc Tax
Kyosho Spur Gear (72T) (48P): RB/SC/ZX (KYO KP UM730-72B)
This is a 72 tooth 48P Spur Gear from Kyosho for a number of their 1/10 buggies, please check your manual to confirm compatibility.
For updating gear ratios
Kyosho Spur Gear (69T) (48P): RB/SC/ZX (KYO KP UM730-69B)
This is a 69 tooth 48P Spur Gear from Kyosho for a number of their 1/10 buggies, please check your manual to confirm compatibility.
For updating gear ratios
Out of Stock
$12.95 Inc Tax
Kyosho Flat Silicone Sensor Wire/Cable (100mm) (KYO KP 82262-100)
This is an 100mm long Flat Silicone Sensor Cable from Kyosho.
100mm flat sensor cable
Kyosho Flexible Silicone Sensor Cable (150mm) (KYO KP R246-8581)
This is a flexible 150mm long Sensor Cable.
150mm Sensor Cable
Kyosho 52T Ball Differential Gear Set: RB/SC (KYO KP UM509)
This is a 52 tooth Ball Differential Gear Set from Kyosho for a number of their 1/10 RB series buggies and SC short Course trucks.
Keep that transmission running smooth
Kyosho 2nd Spur Gear (46T): FW-06 (KYO KP VS008B)
This is a 46Tooth 2nd Spur Gear from Kyosho to fit their On-Road FW-06 race car.
Fits the Kyosho FW-06
Kyosho Titanium Flat Head Screws M3 x 6mm (8) (KYO KP 1-S33006HT)
This is a packet of (8) M3 x 6mm Titanium Flat Head Screws from Kyosho.
Fits many models, check your manual first
Out of Stock
$12.00 Inc Tax
Kyosho SP Servo Saver Spring Set: Fazer (KYO KP FAW004)
This is a SP Servo Saver Spring Set from Kyosho to fit their On-Road Fazer race car.
Fits the Kyosho Fazer
Kyosho MINI-Z Servo Gear set: MR-03 (KYO KP MZ404)
This is a Servo Gear Assembly from Kyosho to fit their MR-03 Mini-Z vehicles.
Need to do some maintenance?
Kyosho Receiver Box Set: MP9 TKI3 (KYO KP IF479)
This is a Receiver Box Set from Kyosho for their MP9 TKI3 1/8 Scale Buggy Kit.
Replacement Receiver box
Kyosho 3.5mm (63mm) Rear Shock Shaft (2): MP7/MP777/MP9/MP10/STR (KYO KP IFW149-02)
This is a packet of (2) 3.5mm Rear Shock Shaft from Kyosho included in most of their 1/8 buggy kits.
These shock shafts are 63mm long
Kyosho Front Lower Arm Set: Spada (KYO KP SD001)
This is a Front Lower Arm Set from Kyosho for their 1/12 Nitro Spada Race Kit.
Classic 1/12 Nitro Racer
Out of Stock
$11.50 Inc Tax
Kyosho Front Driveshaft Set (2): Spada (KYO KP SD010)
This is a packet of (2) Front Driveshafts from Kyosho for their 1/12 Nitro Spada Race Kit.
Classic 1/12 Nitro Racer
Out of Stock
$11.50 Inc Tax
kyosho 14AWG Silicone Wire Black and Red (900mm) (KYO KP R246-8512)
This is a packet of 14AWG Black and Red Silicone Wire from Kyosho.
14AWG Both Black and Red
Out of Stock
$11.25 Inc Tax
Kyosho LiPo Battery Plug 4mm Bullets to Deans (KYO KP R246-8532)
This is a LiPo Battery Plug 4mm Bullets to Deans from Kyosho.
4mm Bullets to Deans
Out of Stock
$10.95 Inc Tax
Kyosho Suspension Bushing Set (Red): MP9 TKI3 (KYO KP IF442KR)
This is a optional Red Suspension Bushing Set from Kyosho for their MP9 TKI3 1/8 Scale Buggy Kit.
This set includes 22 bushings, allowing for a variety of tuning options.
This set includes 22 bushings, allowing for a variety of tuning options.
Customise the look of your MP9
Out of Stock
$10.95 Inc Tax
Kyosho MINI-Z Tire Case (2pcs) (KYO KP MZW115B)
This is a packet of (2) Tire Cases from Kyosho for keeping spare Mini-Z tires organised.
keeps your tires organized
Out of Stock
$10.95 Inc Tax
Kyosho Aluminium Heat Shield Tape (40x2500mm) (KYO KP 96165B)
This is a 40mm x 2500mm roll of Aluminium Tape from Kyosho.
This tape can be used to re-enforce your bodies, protect your paint from wear, or to help protect your body and fuel tank from heat damage.
This tape can be used to re-enforce your bodies, protect your paint from wear, or to help protect your body and fuel tank from heat damage.
Good for protecting that new paint job.
Kyosho Rear Hub Set: V-One RRR (KYO KP VZ202)
This is a Front Torque Rod from Kyosho to fit their On-Road V-One RRR race car.
Fits the Kyosho V-One RRR
Kyosho Deans Plugs Male (5) and Heat Shrink. (KYO KP R246-8522)
This is a packet of (5) Deans (T-Plugs) and Heat Shrink from Kyosho.
These are to go on your charger and ESC's (NOT ON BATTERIES)
These are to go on your charger and ESC's (NOT ON BATTERIES)
For Chargers / ESC's etc
Out of Stock
$9.95 Inc Tax
Kyosho Deans Plugs Female (5) and Heat Shrink. (KYO KP R246-8523)
This is a packet of (5) Deans (T-Plugs) and Heat Shrink from Kyosho.
These are to go on your Batteries and NOT your charger or ESC's
These are to go on your Batteries and NOT your charger or ESC's
For Batteries
Kyosho Touring Car Spur Gear (68T): FZ02 (KYO KP FA556-68)
This is a 68T Spur Gear from Kyosho to fit their FZ02 Fazer Mk2 cars.
Fits the new Fazer Mk2
Out of Stock
$9.95 Inc Tax
Kyosho King Pin and Flanged Bushings Set: OPTIMA (KYO KP OT212)
This is a King Pin and Flanged Bushings Set from Kyosho for the Optima 4wd buggy.
Packet includes:
Packet includes:
- 4 x Bushing inserts
- 4 x Screws
Can also fit other models
Kyosho MINI-Z Pinion Gear Set (9T) (3) (KYO KP MZ006BK-09)
This is a packet of (3) 9 tooth Pinion Gears from Kyosho to fit their Mini-Z vehicles.
Includes 3 (9T) pinions
Out of Stock
$9.95 Inc Tax
Kyosho MINI-Z Pinion Gear Set (8T) (3) (KYO KP MZ006BK-08)
This is a packet of (3) 8 tooth Pinion Gears from Kyosho to fit their Mini-Z vehicles.
Includes 3 (8T) pinions
Out of Stock
$9.95 Inc Tax
Kyosho MINI-Z Pinion Gear Set (7T) (3) (KYO KP MZ006BK-07)
This is a packet of (3) 7 tooth Pinion Gears from Kyosho to fit their Mini-Z vehicles.
Includes 3 (7T) pinions
Out of Stock
$9.95 Inc Tax
Kyosho MINI-Z Pinion Gear Set (6T) (3) (KYO KP MZ006BK-06)
This is a packet of (3) 6 tooth Pinion Gears from Kyosho to fit their Mini-Z vehicles.
Includes 3 (6T) pinions
Out of Stock
$9.95 Inc Tax
Kyosho MINI-Z Multi Wheel II (Narrow) 2.5 Offset (White) (KYO KP MZH131W-N25B)
This is a packet of (2) 2.5mm Offset Narrow White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Narrow Mini-Z rims 2.5mm offset
Kyosho MINI-Z Multi Wheel II (Narrow) 2.0 Offset (White) (KYO KP MZH131W-N2B)
This is a packet of (2) 2mm Offset Narrow White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Narrow Mini-Z rims 2mm offset
Kyosho MINI-Z Multi Wheel II (Wide) 3.0 Offset (White) (2) (KYO KP MZH131W-W3B)
This is a packet of (2) 3mm Offset Wide White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Wide Mini-Z rims 3mm offset
Out of Stock
$9.00 Inc Tax
Kyosho MINI-Z Multi Wheel II (Wide) 2.0 Offset (White) (KYO KP MZH131W-W2B)
This is a packet of (2) 2mm Offset Wide White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Wide Mini-Z rims 2mm offset
Kyosho Parts Box S (1x 7 bay) (KYO KP 80465)
This is a handy multiuse case with a Kyosho logo.
The Kyosho 80465 Parts Box S provides a compact, organised place for the small items that clutter a workbench. It is aimed at model enthusiasts who want a practical way to store common spares and fixings.
Keeping Small Bits Under Control
This box is useful for anyone who regularly disassembles models and needs to keep tiny parts sorted. Clear organisation makes rebuilds and adjustments quicker and less stressful.
Easy To Move To The Track
Designed with mobility in mind, the Kyosho Parts Box S slips into bags and toolboxes so you can bring a curated set of components to practice and race days.
Great for storing small items
Kyosho Ball Ends (5.8mm) (8) (KYO KP 1295)
This is a Packet of ((8) 5.8mm Ball Ends from Kyosho.
Fits many models, check manual first
Out of Stock
$7.95 Inc Tax
Kyosho 20 Degree Front Hub Carriers: MP7.5 (KYO KP IFW138)
This is a packet of (2) 20 Degree Front Hub Carriers from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.
For early 1/8 Nitro Inferno MP7.5 racer
Kyosho Front Torque Rod: MP7.5 (KYO KP IFW112)
This is a Front Torque Rod from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.
This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.
This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.
For early 1/8 Nitro Inferno MP7.5 racer
Kyosho MINI-Z Multi Wheel II (Narrow) 1.0 Offset (White) (KYO KP MZH131W-N1)
This is a packet of (2) 1mm Offset Narrow White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Narrow Mini-Z rims 1mm offset
Kyosho MINI-Z Multi Wheel II (Narrow) 1.5 Offset (White) (KYO KP MZH131W-N15)
This is a packet of (2) 1.5mm Offset Narrow White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Narrow Mini-Z rims 1.5mm offset
Kyosho MINI-Z Multi Wheel II (Wide) 0 Offset (White) (2) (KYO KP MZH131W-W0)
This is a packet of (2) 0mm Offset Wide White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Wide Mini-Z rims 0mm offset
Kyosho MINI-Z Multi Wheel II (Wide) -1.0 Offset (White) (2) (KYO KP MZH131W-W-1)
This is a packet of (2) -1mm Offset Wide White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Wide Mini-Z rims -1mm offset
Kyosho MINI-Z Multi Wheel II (Wide) 2.0 Offset (White) (2) (KYO KP MZH131W-W2)
This is a packet of (2) 2mm Offset Wide White Multi Wheel II from Kyosho to fit their Mini-Z vehicles.
Wide Mini-Z rims 2mm offset
Out of Stock
$7.50 Inc Tax
Kyosho 1st Spur Gear (51T): FW-06 (KYO KP VS006)
This is a 51Tooth 1st Spur Gear from Kyosho to fit their On-Road FW-06 race car.
Fits the Kyosho FW-06
Kyosho 4x4.5mm Steel Flanged Nut (8) (Blue) (KYO KP 1-N4045F-B)
This is a packet of (8) Blue 4x4.5mm Steel Flanged Nuts from Kyosho.
Often used to mount wheels
Out of Stock
$6.95 Inc Tax
Kyosho 3x29.5mm Suspension Shafts (2): MP9 (KYO KP IF425-29.5)
This is a packet of (2) 3x29.5mm Suspension Shafts from Kyosho included in their 1/8 MP9 buggy kits.
Fits all MP9 models
Kyosho 2.6x17mm Wheel Pins (4): MP9/MP10/ST-RR (KYO KP IF110)
This is a packet of (4) 2.6x17mm Wheel Pins from Kyosho for their MP9 & MP10 1/8 Scale Buggy and ST-RR Truggy Kits.
Pin to attach the wheel hubs
Kyosho 1st Gear 0.8M-50T: Spada (KYO KP SD025-50)
This is a 50Tooth (0.8m) 1st Gear from Kyosho for their 1/12 Nitro Spada Race Kit.
Classic 1/12 Nitro Racer
Out of Stock
$5.95 Inc Tax
Kyosho Flat Head Hex Screws (4x10mm) (10) (KYO KP 1-S34010)
This is a Packet of (10) 4x10mm Flat Head Hex Screws from Kyosho.
Fits many models, check manual first
Out of Stock
$5.95 Inc Tax
Kyosho Case Gasket & 5mm Washer Set: GS-11R (KYO KP 6510-11)
This is a Case Gasket & 5mm Washer Set from Kyosho to fit their GS-11R Nitro Engine.
Fits the Kyosho GS-11R Nitro Engine
Out of Stock
$5.95 Inc Tax
Kyosho 4x4.5mm Steel Flanged Nut (10) (Black) (KYO KP 1-N4045F)
This is a packet of (10) Black 4x4.5mm Steel Flanged Nuts from Kyosho.
Often used to mount wheels
Kyosho M4x4.5mm Nylock Nut (5) (Black) (KYO KP 1-N4055N)
This is a packet of (5) Black 4x4.5mm Nylock Nuts from Kyosho.
Often used to mount wheels
Kyosho 3x35mm Suspension Shafts (2): MP9 (KYO KP IF425-35)
This is a packet of (2) 3x35mm Suspension Shafts from Kyosho included in their 1/8 MP9 buggy kits.
This package also includes two screws
Kyosho 1/8 Front Bumper (KYO KP IF127)
This is a 1/8 Front Bumper from Kyosho for their older 1/8 buggies and truggies.
Fit a number of older 1/8 vehicles
Kyosho Deans Plugs (1pr) and Heat Shrink. (KYO KP R246-8521)
This is a packet of 1x Male & 1x Female Deans (T-Plugs) and Heat Shrink from Kyosho.
1x Male & 1x Female
Out of Stock
$4.95 Inc Tax
Kyosho 2.5mm E-Clip (10) (KYO KP 1-E025)
This is a packet of (10) 2.5mm E-Clip from Kyosho
Keep up with your maintenance
Kyosho 2.0mm E-Clip (10) (KYO KP 1-E020)
This is a packet of (10) 2.0mm E-Clip from Kyosho
Keep up with your maintenance
Kyosho 1/10 Body Clips (5) (KYO KP 1889)
This is a packet of (5) 1/10 Body Clips from Kyosho.
Replace lost body clips