ORCA
ORCA Blitreme 3 13.5T Sensored Brushless Motor (OCA MO24BTM3135)
ORCA Blitreme 3 EXTREME 13.5T Sensored Brushless Motor
ORCA presents the Blitreme 3, a completely newly developed series of brushless motors for on and off-road stock classes.
The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight.
A lot has also been done on the inside to be able to compete at the front in the highly competitive stock classes.
ORCA presents the Blitreme 3, a completely newly developed series of brushless motors for on and off-road stock classes.
The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight.
A lot has also been done on the inside to be able to compete at the front in the highly competitive stock classes.
ROAR Approved New 2024
ORCA Blitreme 3 17.5T Sensored Brushless Motor (OCA MO24BTM3175)
ORCA Blitreme 3 EXTREME 17.5T Sensored Brushless Motor
ORCA presents the Blitreme 3, a completely newly developed series of brushless motors for on and off-road stock classes.
The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight.
A lot has also been done on the inside to be able to compete at the front in the highly competitive stock classes.
ORCA presents the Blitreme 3, a completely newly developed series of brushless motors for on and off-road stock classes.
The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight.
A lot has also been done on the inside to be able to compete at the front in the highly competitive stock classes.
2024 NZRCA 4wd Stock Champion
ORCA ORCA Blinky Pro Totem ESC 2S, Built in CAP, 23.5g, Reverse Polarity Protected, Pre Wired 120mm Long. (OCA ES22TOTEM2S)
This is the Totem Spec Class Brushless ESC from ORCA.
The ORCA Totem brushless esc is ORCA's latest stock spec Speed controller. It features a continuous current rate of 100A, which is enough of up to 10.5T motors while using the included fan mounted on top of the esc.
The 23.5g light Totem esc comes with temporary reverse polarity protection and integrated capacitors for a even smaller footprint.
Features:
Specifications:
The ORCA Totem brushless esc is ORCA's latest stock spec Speed controller. It features a continuous current rate of 100A, which is enough of up to 10.5T motors while using the included fan mounted on top of the esc.
The 23.5g light Totem esc comes with temporary reverse polarity protection and integrated capacitors for a even smaller footprint.
Features:
- For: 1/10 Stock Class Racing
- Material: Aluminum
- Color: Black
- Reverse Polarity Protection
- Bulit-in Capacitor
- Super light weight (23.5g)
- Narrow Footprint of 25.8mm
- Central cable output at rear of ESC
Specifications:
- For: 1/10 RC Car
- Material: Aluminium
- Color: Black
- System: Brushless
- Dimensions: 23.5 (L) x 33.6 (W) x 17.6 (H) mm
- Weight: 23.5g (Excluding Wires)
- Voltage Input: 6V-8.7V
- Peak Current: 380A
- Continuous Current: 100A
- Motor Limit: Over 10.5T
- Motor Type: Sensored 540 Sized Brushless Motor
- BEC: 4A_6V/7V
- Multi Protection System: Yes
Includes reverse polarity protection
Out of Stock
$169.00 Inc Tax
Orca 800 Series 80A V2 Brushed ESC With LED Program Card (OCA ES24BRU80V2)
This is the 800 Series 80A V2 Brushed ESC With LED Program Card from Orca.
The reliable hardware combined with powerful software (features an array of programmable parameters like start force, drag brake rate, and etc.) creates an ideal power solution to 1/10th, 1/8th rock crawlers but is equally a reliable, powerful option for other 1/10 brushed motor applications.
Features:
Specifications:
The reliable hardware combined with powerful software (features an array of programmable parameters like start force, drag brake rate, and etc.) creates an ideal power solution to 1/10th, 1/8th rock crawlers but is equally a reliable, powerful option for other 1/10 brushed motor applications.
Features:
- For: 1/10 RC
- Material: Aluminum / Plastic
- Color: Black
- Super Small Size
- Upgraded High Output 5A BEC
- Aluminum Bottom Case
- Waterproof
- 80A High Current Output
- LED Program Card
Specifications:
- Size: 29x34.8x10.2mm
- XT60 Plug for battery connection
- Weight: 20g
- Input Voltage: 6-12.6V (2-3S LiPo)
- Peak Current: 400A
- Continuous Current: 80A
- Motor Type: 540 and 550 size Brushed Motors
- B.E.C.: 5A/6V
Excellent for vintage racing
ORCA Program Card (OE1/OE101) (OCA PR19OE1CARD)
This is a Program Card from ORCA for their OE1/OE101 range of Electronic Speed Control ("ESC") for programming your customized setups and parameters.
Compatible with ORCA OE1/OE101 Range of ESCs
Out of Stock
$89.95 Inc Tax
ORCA Pit Board Leveling System (OCA TOOLS20LEVB)
This is a Pit Board Leveling System from ORCA.
Specifications:
Specifications:
- Easy Installation
- Easy Level Adjustment from the top
- Flat screw preventing damage to the board
- Stainless Steel Screws
- 10mm Height Adjustment
- fit up to 15mm thickness board
Get that Setup board level before using
Out of Stock
$59.95 Inc Tax
ORCA Brushless 540 Motor Bearing Puller & Installer (OCA TOOLS19MBRT)
This is a Bearing Puller & Installer from ORCA for 540 Brushless Motors.
Easily remove motor bearings
Out of Stock
$54.95 Inc Tax
ORCA Program Card (R32) (OCA OPC332PB)
This is a Program Card from ORCA for their R32 range of Electronic Speed Control ("ESC") for programming your customized setups and parameters.
This ESC Program Card incorporates the convenience and flexibility of user's own Micro SD card(not included).
With Micro SD technology, it is literally unlimited in storage. With use of Micro SD, download of ORCA's TEAM Drivers setups is greatly facilitated so user can "Drive like a Pro".
Firmware update becomes a breeze now eliminating any computer compatibility previously experienced in last version of Program Card (OPC111VS). Presence of USB Port option allows user to connect the programmer to the computer to download software to the Micro SD card.
This ORCA Program Card comes with a 200mm programming cable. The LCD display is 2-line dot matrix with blue backlit.
This ESC Program Card incorporates the convenience and flexibility of user's own Micro SD card(not included).
With Micro SD technology, it is literally unlimited in storage. With use of Micro SD, download of ORCA's TEAM Drivers setups is greatly facilitated so user can "Drive like a Pro".
Firmware update becomes a breeze now eliminating any computer compatibility previously experienced in last version of Program Card (OPC111VS). Presence of USB Port option allows user to connect the programmer to the computer to download software to the Micro SD card.
This ORCA Program Card comes with a 200mm programming cable. The LCD display is 2-line dot matrix with blue backlit.
Compatible with ORCA R32 Range of ESCs
ORCA Super Capacitor (Blinky) (OCA CP19SU9V15F)
This is a Super Capacitor for Electronic Speed Controls from ORCA.
Specifications:
Specifications:
- Ideal for stock blinky competition
- 9V
- 1.5f
- Not recommended for Modified Applications
Get that edge in Blinky Spec Racing
ORCA V3 Fan Mount (OCA OMF033V3)
This is a version 3 Fan mount from ORCA.
New design clamps tighter to a 540 size motor for more secure mounting.
New design clamps tighter to a 540 size motor for more secure mounting.
Clamps tighter on motor than previous versions
Out of Stock
$37.95 Inc Tax
ORCA 40mm Insane High Voltage Fan (OCA OF4033HR)
This is a 40mm "Insane" High Voltage Fan from ORCA.
40mm High Voltage Fan
Out of Stock
$29.95 Inc Tax
ORCA Non-Magnetic 7075 Aluminium Motor Screw Set (6pcs) for BLITREME/RT/RT-S (OCA OSR3X3RM)
This is a Non-Magnetic 7075 Aluminium Motor Screw Set (6pcs) for BLITREME/RT/RT-S - SILVER
- gain approx 160kv, 1,350rpm in BLITREME 17.5T
- 65% lighter
- quicker motor response
The ORCA 7075 Aluminium motor screw is a direct replacement for the stock steel screws.
The Aluminium screw set reduces weight of the motor assembly by 3.7 grams (5.7g v. 2.0g), improves RPM and motor response by reducing the magnetic field of the stock steel screws.
Includes (3) 7075 aluminium main motor assembly long screws and (3) 7075 aluminium timing screws.
Gain approx 160kv, 1,350rpm in BLITREME 17.5T
ORCA 30mm High Voltage Fan (OCA OF3011HB)
This is a 30mm High Voltage Fan from ORCA.
30mm High Voltage Fan
Out of Stock
$24.95 Inc Tax
ORCA Capacitor for OE1 (OCA CP19ST4702P)
This is a Replacement Capacitor for OE1 Electronic Speed Controls from ORCA.
May suit other 1/10 Brushless ESCs.
May suit other 1/10 Brushless ESCs.
May suit other 1/10 Brushless ESCs
ORCA 13AWG Silicone Wire (Black) (OCA OSW1329A)
This is a packet of 13AWG Black Silicone Wire from ORCA.
13AWG high flexible high quality copper wire, easy to solder supply stable power to ESC and motor.
13AWG is perfect for Stock Racing
ORCA Receiver Cable for OE101, OE1 & PB1001 ESCs (200mm) (OCA CB19PWCABLE)
This is a 200mm White Program Cable from ORCA for their OE101, OE1 & PB1001 ESC's.
For the OE101, OE1 & PB1001 ESC's
ORCA Receiver Cable for VX3 ESC (100mm) (OCA OBC100VB)
This is a 100mm Receiver Cable from ORCA for their VX3 ESC.
100mm version
ORCA Receiver Cable for VX3 ESC (180mm) (OCA OBC180JB)
This is a 180mm Receiver Cable from ORCA for their VX3 ESC.
180mm version
- 1