Futaba

Hold the 3PV in your hand, and instantly feel how lightweight it is. Access the programming menu on the easy-to-read screen, and see how sophisticated it is. Experience the 3PV's super-fast response rate, and realize that you're in command of the system that can make a real difference on race day. You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C's most versatile surface system. 

Steering, Throttle and Steering Dual Rate digital trims are conveniently positioned around the wheel for easy access. The nearby switch is for programming 3rd channel functions if needed.

The large screen makes it easy to view information from the 3PV's intuitive menu.

Includes:

• 1 x 3PV Transmitter
• 1 x 3-Channel R203GF Receiver
• 1 x Instruction Manual

Requires:

• 4 x AA Batteries: For transmitter

Features:

• FHSS/S-FHSS/T-FHSS* protocols
• 10-model memory
• Model Reset
• Model Name (4-Character)
• Low Battery Alarm
• Link Mode (T-FHSS only)
• DT3 Selection
• SW1
• Steering Trim
• Throttle Trim
• Channel 4 Trim
• Sub Trim
• Steering Dual Rates
• Steering End Point Adjustment)
• Throttle End Point Adjustment
• Channel 3 End Point Adjustment
• Channel 4 End Point Adjustment
• 4WS/Brake Mixing
• Steering Servo Reversing
• Throttle Servo Reversing
• Channel 3 Servo Reversing
• Channel 4 Servo Reversing
• Steering Exponential
• Throttle Exponential
• Throttle Fail Safe
• ABS Function
• Model Data Copy
• Auto Power-Off after 10 minutes

Specifications:

Band:	2.4GHz
Channels:	3+1 (The 4th channel is used for mixing functions only.)
Model Memory:	10
Maximum Operating Range:	80m (Optimum condition)
For Safety:	Failsafe and ID
Transmitter (Tx) Battery Type:	AA x 4 (Sold Separately)
Current Drain:	100 mA or less
Transmitter Antenna:	1/2λ di-pole (Built-in)

Hold the 3PV in your hand, and instantly feel how lightweight it is. Access the programming menu on the easy-to-read screen, and see how sophisticated it is. Experience the 3PV's super-fast response rate, and realize that you're in command of the system that can make a real difference on race day. You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C's most versatile surface system. 

Steering, Throttle and Steering Dual Rate digital trims are conveniently positioned around the wheel for easy access. The nearby switch is for programming 3rd channel functions if needed.

The large screen makes it easy to view information from the 3PV's intuitive menu.

Includes:

• 1 x 3PV Transmitter
• 1 x 3-Channel R314SB Receiver
• 1 x Instruction Manual

Requires:

• 4 x AA Batteries: For transmitter

Features:

• FHSS/S-FHSS/T-FHSS* protocols
• 10-model memory
• Model Reset
• Model Name (4-Character)
• Low Battery Alarm
• Link Mode (T-FHSS only)
• DT3 Selection
• SW1
• Steering Trim
• Throttle Trim
• Channel 4 Trim
• Sub Trim
• Steering Dual Rates
• Steering End Point Adjustment)
• Throttle End Point Adjustment
• Channel 3 End Point Adjustment
• Channel 4 End Point Adjustment
• 4WS/Brake Mixing
• Steering Servo Reversing
• Throttle Servo Reversing
• Channel 3 Servo Reversing
• Channel 4 Servo Reversing
• Steering Exponential
• Throttle Exponential
• Throttle Fail Safe
• ABS Function
• Model Data Copy
• Auto Power-Off after 10 minutes

Specifications:

Band:	2.4GHz
Channels:	3+1 (The 4th channel is used for mixing functions only.)
Model Memory:	10
Maximum Operating Range:	80m (Optimum condition)
For Safety:	Failsafe and ID
Transmitter (Tx) Battery Type:	AA x 4 (Sold Separately)
Current Drain:	100 mA or less
Transmitter Antenna:	1/2λ di-pole (Built-in)

The is an aluminium carrying case for Futaba 7PX Transmitter.

Dimensions: 376 x 262 x 216mm 

This is the High Speed Response R404SBS-E F-4G T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba which are included with the new 10PX transmitters.

NOTE:

• SR mode servos must be used when using SR mode. Use of normal servos may cause servo glitching.
• Never use the R404SBS-E in gas or nitro powered models.

Specifications:

• Size: 25.5×20.7×10.6 mm
• Weight: 5.7 g
• Operating Voltage: DC 3.7V-7.4V

This is the High Speed Response R404SBS F-4G T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba which are included with the new 10PX transmitters.


Specifications:

• Size: 25.5×20.7×10.6 mm
• Weight: 5.7 g
• Operating Voltage: DC 3.7V-7.4V

This is the High Speed Response R334SBS-E T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba.

Designed for use with Futaba surface transmitters using TFHSS and
TFHSS-SR technology
TFHSS bidirectional telemetry
Programmable and compatible with S.Bus2 systems
Normal/high-speed modes (auto detection), normal mode accepts any
type of servo, high-speed mode only accepts digital servos
including BLS servos
High voltage
Dual antenna diversity
Battery fail safe
One year limited warranty through Hobby Services beginning at date of
purchase

NOTE:

• Never use the R344SBS-E in gas or nitro powered models.

Specifications:

• Size: 33.9×22.3×11.3 mm
• Weight: 7.3 g
• Operating Voltage: DC 3.7V-7.4V

This is the R314SB-E T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba compatible: 7PX / 7XC / 4PM / 4PX / 4PV / 4PLS / 4GRS / 3PV

T-FHSS Telemetry System 4-Channel Receiver T-FHSS/S.Bus2


NOTE:

• The R314SB-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models.

Features:

• Compatible: 7PX / 7XC / 4PM / 4PX / 4PV / 4PLS / 4GRS / 3PV
• T-FHSS Telemetry System 4-Channel Receiver
• T-FHSS/S.Bus2

Specifications:

• Frequency: 2.4GHZ T-FHSS
• Nominal Input Voltage: 4.8-7.4V
• Dimensions: 35.1 x 23.2 x 12.5mm
• Weight: 7g
• Range: Only for Electric Powered Car Models

This is the R314SB T-FHSS 4-Channel 2.4Ghz Telemetry Receiver from Futaba for 4PLS 4PX 4PXR 3PV Radios.


Features:

• For: 4PLS 4PX 4PXR
• Modulation Method: 2.4GHz
• Color: Black

Specifications:

• Dimensions: 35.1 x 23.2 x 8.5mm
  Weight: 6.6g
  Rated Voltage: 4.8V-7.4V
  Operating Voltage: 4.0V-8.4V

This is the R204GF-E 4-Channel 2.4GHz S-FHSS Micro Receiver from Futaba which is ideally sized for electric powered 1/10 and 1/12 scale vehicles including rock crawlers. It features a built-in internal antenna system and compatible for use with Futaba S-FHSS or FHSS transmitters. 


Specifications:

• Operating Voltage: 4.8 - 7.4V
• Receiving Range: 70m
• Battery Failsafe: 3.8V
• Current Drain: 30Ma (at no signal)
• Size: 35.1 x 23.2 x 9mm
• Weight: 6g

This is a replacement touch screen from Futaba for their 7PX and 7PXR transmitters.

This is the R203GF 3-Channel 2.4GHz S-FHSS Receiver from Futaba which is compatible with Futaba FHSS and S-FHSS transmitters. Futaba S-FHSS 2.4GHz receivers benefit from Futaba's patented Pre-Vision™ circuitry, which scans incoming data and corrects errors before they can become problems.

They sync perfectly with Continuous Channel Shifting, handling hundreds of frequency changes per second with flawless precision. Plus, they all offer the Easy-Link™ advantage — the feature that allows the receiver to “learn” the transmitter module’s unique code with the push of a button and establish a unique, unbreakable bond between the two.

Frequency Hopping Spread Spectrum (FHSS) technology minimizes interference from other 2.4GHz systems. Easy Link prevents unwanted signal conflicts by using a special, pre-assigned ID code. High-voltage  operation.

NOTE: This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.

Features:

• S-FHSS/FHSS auto detection
• Compatible with Futaba S-FHSS/FHSS protocol
• Normal and high-speed mode:
• Normal mode has a frame rate output of 13.63ms and accepts any type of servos or peripherals
• High-speed mode, with an output of 6.8ms, accepts digital servos including the BLS series and most peripheral equipment such as brushless ESCs

Specifications:
Dimensions: 26x39x10mm
Weight: 8g
Operating Voltage: 4.8 to 7.4V |
Number of Ports: 4
PWM Output: 3
SBUS Ports: 0
SBUS2 Ports: 0
FASST: No
Telemetry: no
S-FHSS: Yes
High Speed: Yes
High Voltage: Yes
Connector: J (STND)
Range: Full Range

NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems.

This is the R202GF 2-Channel 2.4GHz S-FHSS Receiver from Futaba which is compatible with Futaba FHSS and S-FHSS transmitters.

Specifications:
Dimensions: 35x23x9mm
Weight: 6g
Operating Voltage: 4.8 to 7.4V
Number of Ports: 3
SBUS Ports: 0
SBUS2 Ports: 0
FASST: No
Telemetry: no
S-FHSS: Yes
High Voltage: Yes

NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest or T-FHSS systems.