GT Power
GT Power AC/DC C6D PRO Charger (12.0A) (100W) (GT-C6D Pro)
The G.T. Power C6D mini charger is small yet powerful for up to 4S Lithium batteries.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Lihv, Lipo, Life, Nimh, Nicd and Pb (lead acid) batteries.
Specifications:
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Lihv, Lipo, Life, Nimh, Nicd and Pb (lead acid) batteries.
Specifications:
- Input Voltage Range: AC 100V-240V / DC 11-26V
- Charge Power: AC Max. 100W / DC Max 300W
- Charge Current Range: 0.1A - 12.0A
- Discharge Current Range: 0.1A - 3.0A / 12A in FB DIS mode
- NiCd/MiNM Battery Cell Count: 1S-15S
- Lithium Battery Cell Count: 1S-6S
- Pb Battery Voltage: 6V(3P) - 12V (6P)
- Weight: 302g
- Dimension: 119mm x 122mm x 53.5mm
- Charge: Lihv / Lipo / Life / Nimh / Nicd / Pb
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
Intelligent Balance Charger / Discharger
Out of Stock
$155.00 Inc Tax
GT Power AC/DC C607D Charger (7.0A) (80W) (GT-C607D)
The G.T. Power C607D charger is a simple yet powerful dual input multi-functional charger with built in LiPo balancing (JST-XH) for up to 6S Lithium batteries.
It is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Ni-Cd, Ni-MH, and Pb (lead acid) batteries.
Features:
Specifications:
Includes:
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
It is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Ni-Cd, Ni-MH, and Pb (lead acid) batteries.
Features:
- Capacity Limit
- Maximum safety
- Temperature monitoring
- Input power monitoring
- Easy to program buttons
- 5 battery memory
- Individual cell monitoring
- 2-Line Back lit LCD display
- Built in Balancer to 6S packs
- Cycle charging/discharging
- Includes "FAST" & "STORAGE" Li-xx programs
Specifications:
- Output: 80W
- Discharge: 5W
- Balancing current: 300mAh/cell
- Operating input voltage: 10 - 18V DC or 100-240V AC
- Ni-Cad / Ni-MH: 1 - 15 Cells
- Li-Ion / Li-Po / Li-Fe: 1 - 6 Series
- Charge current: 0.1 - 7.0A
- Discharging current: 0.1 - 1.0A
- PB / Lead Acid: 2 - 20V
- Built in Cell Balancer: Up to 6S (series) Li-Po (JST-XH connectors)
- No. of Cycles : Up to 5 Cycles
- Weight : 400g
- Dimensions : 136mm x 127mm x 56mm
Includes:
- 1 x Charger
- 1 x Alligator Clips to DC Cable
- 1 x Alligator Clips to Dean style connector
- 1 x Mini JST (red) connector to Dean style connector cable
- 1 x Female servo connector to Dean style connector cable
- 1 x Glow plug connector to Dean style connector cable
- 1 x 4mm banana connectors to Dean style connector cable
- 1 x Mains lead
- 1 x Manual
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
Powerful AC & DC input charger
Out of Stock
$119.95 Inc Tax
GT Power AC C6D Mini Charger (6.0A) (60W) (GT-C6DMini)
The G.T. Power C6D mini charger is small yet powerful for up to 4S Lithium batteries.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Lihv, Lipo, Life, Nimh, Nicd and Pb (lead acid) batteries.
Specifications:
Includes:
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Lihv, Lipo, Life, Nimh, Nicd and Pb (lead acid) batteries.
Specifications:
- Operating Voltage Range: AC 100V-240V
- Circuit Power: Max. 60W For Charging / Max. 10W For Discharging
- Charge Current Range: 0.1A - 6.0A
- Discharge Current Range: 0.1A - 2.0A
- Current Drain For Balancing Li-po: 300 mAh/cell
- NiCd/MiNM Battery Cell Count: 6S-8S
- Lithium Battery Cell Count: 2S-4S
- Pb Battery Voltage: 6V(3P) - 12V (6P)
- Weight: 302g
- Dimension: 115mm x 112mm x 55mm
- Charge: Lihv / Lipo / Life / Nimh / Nicd / Pb
Includes:
- GT Power C6D Mini balancing charger
- 1 power cable
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
Mini AC Balance Charger / Discharger
GT Power AC SD4 Charger (3.0A) (20W) (GT-SD4)
This is the AC SD4 Balance Charger by GT Power.
Charger for LiPo, LiFe, LiHV and NiMh/NiCd batteries with balancer built-in, 100-240V mains. Supplied with a Deans "T" connector charge lead.
Specifications:
Includes:
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
Charger for LiPo, LiFe, LiHV and NiMh/NiCd batteries with balancer built-in, 100-240V mains. Supplied with a Deans "T" connector charge lead.
Specifications:
- Input voltage: AC 100-240V
- Output power: max 20W
- Charge current range (Amps): 0.5/1/1.5/2/2.5/3
- LiPo/LiFe/LiHV cell counts: 2 - 4
- NiMH/NiCd cell counts: 4 - 8
Includes:
- GT Power SD4 Balance Charger
- Deans "T" connector charge lead
- 1 power cable
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards). LiPo safety bags are also advisable when charging lithium polymer batteries and are compulsory when racing at NZRCA sanctioned meetings.
AC LiPo, LiFe, LiHV and NiMh/NiCd Charger
GT Power AC N802 NiMh/NiCdCharger (2.0A) (20W) (GT-N802)
This is the N802 AC 240V/2A, 20W, 4-8S Nimh/Nicd Charger by GT Power.
Specifications:
Includes:
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards).
Specifications:
- Input Voltage: AC 100-240V
- Supported Batteries: 4-8S Nimh/Nicd
- Charge Current: 2A
- Max Output Power: 20W
Includes:
- GT Power N802 Charger
- 1 power cable
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards).
AC NiMh/NiCd Charger
GT Power B3 AC240V/1.0-1.5A, 2S/3S Lipo Balance Charger (GT-B3)
Specifications:
Includes:
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards).
This is the B3 AC 240V LiPo Charger by GT Power.
A low priced wall charger for LiPo batteries 2 or 3 cell (7.4v or 11.1v). Simple to operate just plug the battery in via the balance plug and it will automatically charge and switch off when full.
Specifications:
- Input Voltage: AC 100-240V
- Output Charge Current: Lipo 2s - 1.5A Lipo 3s- 1.0A
- Supported Batteries: 2-3S LiPo
- LED Display
- Green Flash: Waiting to Charge
- Red Light: Charging ;Green Light: Charge Finished
Includes:
- GT Power B3 Charger
- 1 power cable
IMPORTANT SAFETY NOTICE
Please read the manual and use the charger only as outlined in the instructions. NEVER leave the charger or any batteries unattended during operation and ensure you disconnect everything when finished. Always charge in a suitable environment (on a solid non flammable surface away from fire hazards).
AC LiPo Charger
GT Power Electronic Switch with LED (GT-eSwitch)
This is an Electronic Switch with LED from GT Power.
Features:
Compact and extremely portable
Protect your battery away from damage of discharge and overcharge
High quality and durable in use
Use LED to display the test condition
Specification:
Brand name: G.T.POWER
Weight: 10g
Dimension: 43 x 33 x 9mm
Display: LED
Input Voltage: 5V-10V (Lipo 2S or NiCd/NiMh 4-8S)
Max Peak Current: 14A
Max Continuous Current: 8A
When the power is disconnected then reconnected to the switch, the switch will return to its previous state (on or off)
Its recommended NOT to use lipo mode with electronic switches in IC Car's, as when the voltage cuts, it can cause a runaway.
Features:
Compact and extremely portable
Protect your battery away from damage of discharge and overcharge
High quality and durable in use
Use LED to display the test condition
Specification:
Brand name: G.T.POWER
Weight: 10g
Dimension: 43 x 33 x 9mm
Display: LED
Input Voltage: 5V-10V (Lipo 2S or NiCd/NiMh 4-8S)
Max Peak Current: 14A
Max Continuous Current: 8A
When the power is disconnected then reconnected to the switch, the switch will return to its previous state (on or off)
Its recommended NOT to use lipo mode with electronic switches in IC Car's, as when the voltage cuts, it can cause a runaway.
Peak current 14A, continous 8A
GT Power Light System for Mini Z (GT-57)
This is a Clear & Red LED Light set from GT Power to fit Kyosho Mini-Z vehicles.
Key Features:
Packet includes:
Key Features:
- White front head lights
- Red rear lights
- 5 Operation modes
- Memory mode enables the last light sequence to be set when re-powering the system
Packet includes:
- 2x 3M Tape pads
- 1x Control Unit with 2x3mm LEDs, 2x3mm Red LEDs, Power Switch and battery connection
Includes Both Front and Rear Lights
Out of Stock
$24.95 Inc Tax
GT Power Electronic Switch controlled Via Receiver Channel (GT-113)
This is an Electronic Switch from GT Power that is controlled Via Receiver Channel.
Specification:
Brand name: G.T.POWER
Weight: 8g
Dimension: 25 x 10 x 5mm
Max Peak Current: 10A
Specification:
Brand name: G.T.POWER
Weight: 8g
Dimension: 25 x 10 x 5mm
Max Peak Current: 10A
Peak current 10A
- 1