Protek RC
This is the 1/8 Buggy Tire Bag from ProTek RC.
The ProTek RC 1/8 Buggy Tire Bag is a convenient way to haul and preserve your tires, as well as anything else that fits inside one of six included, airtight 8" tall, 4.75" diameter screw on lid storage tubes. The bag itself is made from heavy duty nylon material and measures 17" wide, 12"deep, and 9" tall.
The lid of the bag features a large ProTek RC logo in white, and has a 16x11" mesh zipper pocket on the inside providing a place to stash setup sheets, tools or other small accessories that may come in handy at the track. If you are serious about keeping your gear neat and tidy, this bag is a must have accessory.
Features:
- Perfect for 1/8 Buggy, 1/10 Short Course, No Prep/Outlaw Drag Racing, and Crawler tires smaller than 12cm
- Six airtight 20.5cm tall, 12cm diameter PET tubes with screw on lid
- Heavy duty nylon material
- Bag measures 43.5cm wide, 30.5cm deep and 23cm tall
- Internal 40.5 x 28cm mesh zippered pocket
The ProTek R/C 1/10 Buggy Carrying Bag is a clean and convenient way to transport your buggy.
Designed for racers looking for a convenient solution to transport an electric 1/10 buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.
The ProTek R/C Carrying Bag is big enough to fit one 1/10 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.
The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your workshop. At the races, roll the bag up until you need it again.
Features:
- Fits 1/10 buggies with tires on
- Contains all dirt and grime inside
- Foam padded
- Carry-on sized for flights
- Can be rolled up when not in use
- Convenient side carrying handle
- Can be used with optional shoulder strap
Specifications:
Fits: 1/10 buggy w/body and w/tires
Dimensions (W x L x H): 28 x 41 x 11cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included
NOTE: Buggy in pictures is for display purposes only and is not included.
The ProTek R/C 1/8 Buggy Carrying Bag is a clean and convenient way to transport your buggy.
Designed for racers looking for a convenient solution to transport a nitro or electric buggy, the bag is a great way to keep your buggy from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.
The ProTek R/C Carrying Bag is big enough to fit one 1/8 buggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.
The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the buggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.
Features:
- Fits 1/8 buggies with tires on
- Contains all dirt and grime inside
- Foam padded
- Carry-on sized for flights
- Can be rolled up when not in use
- Convenient side carrying handle
- Can be used with optional shoulder strap
Specifications:
Fits: 1/8 buggy w/body and w/tires
Dimensions (W x L x H): 34 x 45.5 x 14.5cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included
NOTE: Buggy in pictures is for display purposes only and is not included.
The ProTek R/C 1/8 Truggy Carrying Bag is a clean and convenient way to transport your truggy.
Designed for racers looking for a convenient solution to transport a nitro or electric Truck, this bag is a great way to keep your Truck from rolling around in your car or back of your truck, containing all the dirt and grime after a long day at the track. It also fits great on top of your hauler bag when loading or unloading at the track.
The ProTek R/C Carrying Bag is big enough to fit one 1/8 Truggy with body and tires attached. Two durable zippers close the lid, meeting at the wing stay, leaving the wing exposed. For easy carrying, grab the wing, the side handle on the bag, or attach your own shoulder strap to the two plastic latches. The bag is also carry-on sized so it works great for plane flights.
The bag is constructed from a three-ply design, using easy-to-clean durable material on the outside and inside, with a thin layer of foam padding sandwiched between. This allows the Truggy to stay safe during transport, or while stored in your shop. At the races, roll the bag up until you need it again.
Features:
- Fits 1/8 buggies with tires on
- Contains all dirt and grime inside
- Foam padded
- Carry-on sized for flights
- Can be rolled up when not in use
- Convenient side carrying handle
- Can be used with optional shoulder strap
Specifications:
Fits: 1/8 truggy w/body and w/tires
Dimensions (W x L x H): 44.5 x 53.5 x 12cm
Fits Body: Yes
Fits Wing: Yes, but exposed
Shoulder Strap: Can be used, but is not included
NOTE: Truggy in pictures is for display purposes only and is not included.
The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring 1/8 scale nitro Truggy to and from the pits, with straps optimized for truggy use.
Truggy tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your arm while you’re balancing the truck atop the starter box. Not to mention, the fumes that smack you in the face with every rev of the engine. ProTek R/C’s Starter Box Carrying Bag allows you to comfortably carry your nitro truggy at your side when moving in and out of pit row. The Carrying Bag also frees up your other hand while putting the weight of the truggy and starter box much lower in a more natural position - your arm will thank you!
The all canvas Starter Box Carrying Bag features an interior liner and two handle straps designed not to interfere with truggy tires. The front straps are also attached close to the corner to stay clear of the pipe stinger. Inside the bag, the liner is fuel resistant and easily cleans up when things get messy.
The carrying bag will accommodate most popular starter boxes including: ProTek R/C SureStart, OFNA 1/10 & 1/8 starter boxes, Mugen Seiki Pro Starter BIII, LRP 1/10 & 1/8 Spec 2, Hudy “Star-Box”, Team Associated Compact 1/10 & 1/8 starter boxes and Team Losi 8IGHT & 8IGHT-T starter boxes. Make it easy on your pit guy and grab a ProTek R/C Starter Box Carrying Bag.
Features:
- Durable, heavy-duty bag material
- Dual handles won't interfere with tires
- Safe, one handed pit operation
- Straps optimized for truggy use
- No fumes in your face
- Compatible with boxes up to 14cm wide x 36.8cm long
- Made in the USA
Compatible Starter Boxes:
PTK-4500: ProTek R/C "SureStart"
TLR99059: TLR 8IGHT/8IGHT-T
HUD104500: Hudy "Star-Box"
OFN10244: OFNA Truggy Box
OFN10245: OFNA 1/10 & 1/8
LRP37101: LRP 1/10 & 1/8 Spec 2
MUGB0237: Mugen Pro Starter BIII
ASC1751: Team Associated Compact 1/10 & 1/8
NOTE: Truggy in pictures is for display purposes only and is not included.
The 5000mAh 1.2V sub-C NiMH battery to allow extended use with the safety and peace of mind that can only come from a NiMH battery. The SureStart 2 is a high quality glow ignitor that can be charged easily with most NiMH battery chargers.
This ignitor is great for surface and aircraft applications, due to its compact size and 2.25" reach. Plus, there is a small "Property Of" space on the label can be used to prove ownership when your friends borrow it and forget to give it back.
Use a sharpie to fill in your name, and cover it with clear vinyl or scotch tape to prevent the writing from getting worn off.
The Avid Aluminium HV High Speed Cooling Fan is anodized black with silver chamfers and measures in at 30mm x 30mm x 10mm with a short 30mm JST 2pin wire and includes a 200mm extension cable.
Specifications:
- Operating Voltage: 5.0-8.4V
- RPM Range: 28,000
- Current @ 8.4V: 0.6A
- Size: 30mm x 30mm x 10mm
- Case Material: Machined aluminium anodized black with silver chamfer edges
- Fan Material: Plastic
This is the Fuel Gun and Bottle Holster from ProTek RC.
This innovative and handy accessory allows you to securely carry your fuel gun and bottle, making it easy to access during races and practice sessions. No more fumbling around searching for your fuel bottle or gun, give yourself the holster the pro's use and dominate pit lane!
Note: This holster fits most fuel bottles and guns but may not be compatible with every option available. We recommend the ProTek RC "Fast Fill 2" fuel bottle (PTK-7606) and the ProTek RC "Quick Pit 2" Dump Fuel Gun (PTK-7608) for proper fitment.
Features:
- Securely holds fuel gun and bottle
- Convenient for quick access during races
- Durable construction for long-lasting use
- Secure belt loop and thigh strap mounting
- Pair with the ProTek RC Pro Pit Pack (PTK-8125) for the ultimate pit stop experience!
- Holds both a fuel bottle Fuel Gun
This is the Pro Pit Pack from ProTek RC.
Designed for racers and mechanics alike, this versatile pack ensures that your essential tools and accessories are organized and easily accessible during pit stops. Whether you're at the track or in the workshop, the Pro Pit Pack keeps everything you need within reach, allowing for quick and efficient adjustments.
Constructed from heavy-duty fabric, this pack is built to withstand the rigors of the racing environment. Its compact design makes it easy to carry, while a zippered compartment and elastic straps securely hold your tools, ensuring nothing is left behind. The zippered pouch is perfect for storing small parts like glow plugs, and the additional elastic straps behind the zippered pouch are ideal for items like tuning screwdrivers or glow igniters. With belt clips included, this is a must have for any racer!
Features:
- Compact design for easy portability
- Durable construction to withstand tough conditions
- Multiple compartments for organized storage
- Elastic straps to securely hold tools in place
- Zippered pouch for small part storage
This is a Tire Punch Tool from ProTek R/C which is a must have addition to every racers pit-box.
The textured handle with dual lever cantilever system increases leverage and makes it easy to punch holes in thick material. A six position rotating head assembly features 1.5mm through 4.0mm size steel punch heads, allowing a wide range of options. Additionally, the punch base features a brass insert to reduce wear in the tool head, and an included replacement base creates a tool that offers long term functionality.
Additionally, this hole punch tool is a great accessory for leather craft, fabrics, plastics and other materials. So whether you need to punch vent holes in your tires, or add another notch in your belt, this tool is a great option to fill the hole.
Features:
- Textured handle provides good grip
- Dual lever cantilever mechanism makes it easy to punch holes in thick material
- Six position rotating head assembly
- 1.5mm through 4.0mm size steel punch heads
- Punch base with brass insert reduces tool-head wear
- Replacement base and screwdriver included
- Great accessory for leather craft, fabrics, plastics and other materials
Molded from top quality material to provide supreme durability and reliability, this optional 1/8 Off-Road Euro Wing with tall vertical side dams is intended for 1/8 buggy and truggy platforms to provide the ultimate cornering stability and precision!
In addition, the Higher rear dam structure with pre-Marked dimples allows racers to fine-tune the downforce level by drilling different size holes to increase or decrease the downforce accordingly for different track conditions giving you a distinct advantage in any condition!
Separate yourself from the competition and experience a higher degree of excellence and performance with this 1/8 Off-Road Euro Wing from ProTek!
Features:
- Compatible with all 1/8 buggy and truggy platforms
- Supreme quality Molded materials provide outstanding durability
- Vertical tall side dams to increase cornering stability and precision
- Higher rear dam structure to allow racers to fine-tune the downforce level by drilling different size holes to increase or decrease the downforce
- Includes number plate stickers and wing buttons
- Mounting grid for precise mounting process
- Pre-Marked dimples on the rear dam for optional air flow holes
- Available in multiple color options
Packet includes:
- 1x 1/8 Off-Road Euro Wing
- 2x Wing Button
- 2x Number plate stickers
Molded from top quality material to provide supreme durability and reliability, this optional 1/8 Off-Road Euro Wing with tall vertical side dams is intended for 1/8 buggy and truggy platforms to provide the ultimate cornering stability and precision!
In addition, the Higher rear dam structure with pre-Marked dimples allows racers to fine-tune the downforce level by drilling different size holes to increase or decrease the downforce accordingly for different track conditions giving you a distinct advantage in any condition!
Separate yourself from the competition and experience a higher degree of excellence and performance with this 1/8 Off-Road Euro Wing from ProTek!
Features:
- Compatible with all 1/8 buggy and truggy platforms
- Supreme quality Molded materials provide outstanding durability
- Vertical tall side dams to increase cornering stability and precision
- Higher rear dam structure to allow racers to fine-tune the downforce level by drilling different size holes to increase or decrease the downforce
- Includes number plate stickers and wing buttons
- Mounting grid for precise mounting process
- Pre-Marked dimples on the rear dam for optional air flow holes
- Available in multiple color options
Packet includes:
- 1x 1/8 Off-Road Euro Wing
- 2x Wing Button
- 2x Number plate stickers
The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one standard length servo horn, one 3x10mm button head screw and one 2x7.5mm clamp screw.
Features:
- Clamp design
- 20mm & 16.0mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
- 4.0mm thick arm
- 33mm Overall End to End length
- Linkage holes threaded for 3mm hardware
- 25T Spline Futaba/Savox/ProTek Output Shaft
The SureStart pencil igniter is a high quality glow igniter that uses a AA size alkaline or rechargeable battery.
This ignitor is great for surface and aircraft applications, due to its compact size and 2.25" reach.
The blue anodized aluminium handle is easy to spot in your pit bag, and when properly maintained will withstand years of use.
This is a packet of (8) Tire Glue Bands from ProTek R/C which are an affordable and effective method to create a perfect bond between the tire and wheel.
Too often a faulty glue bond can ruin a tire, as well as possibly damage the wheel and insert. This forces you to repair the tire, or worse...buy a new set of tires.
These mounting bands are ideal for 1/8 and 1/10 off road tires, and will help to make the chore of gluing tires a little easier. The bands apply pressure to the tire and keep the tire bead pressed firmly into the glue channel in the wheel. This eliminates air gaps between the tire and wheel and helps to create a strong glue bond. Plus, the super wide band width helps to apply even pressure along the entire bead width. Package includes eight glue bands.
Ideal For:
- 1/8 Buggy
- 1/8 Truggy
- 1/10 Short Course
- 1/10 Stadium Truck
- 1/10 Buggy
- 1