MIP
MIP Hex Driver Wrench Set (4) (.050", 1/16", 5/64" & 3/32") (SAE) (MIP 9501)
This is a Hex Driver wrench package from MIP which includes the most popular sizes for SAE sized hex-head screws.
For the most reliable tool to tackle hex-head screws, top technicians and racers choose MIP.
Package Includes:
Tool Makeup:
Accolades:
For the most reliable tool to tackle hex-head screws, top technicians and racers choose MIP.
Package Includes:
- 1 x .050" Hand Wrench w/ label and wrap
- 1 x 1/16" Hand Wrench w/ label and wrap
- 1 x 5/64" Hand Wrench w/ label and wrap
- 1 x 3/32" Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$124.95 Inc Tax
MIP Nut Driver Wrench Set (3) (3/16", 1/4", & 11/32") (SAE) (MIP 9505)
This is a Nut Driver wrench package from MIP which includes the most popular sizes for SAE sized nuts.
Package Includes:
Tool Makeup:
Accolades:
Package Includes:
- 1 x 3/16" SAE Hand Nut Driver Wrench
- 1 x 1/4" SAE Hand Nut Driver Wrench
- 1 x 11/32" SAE Hand Nut Driver Wrench
Tool Makeup:
- Steel construction, optimized for durability and long wear characteristics
- Nickel Plated for durability and protection against oxidation or corrosion
- Heat Treated to Last a lifetime (70+ Rockwell Hardness)
- Nice deep tool head in order to get to a nut that is located on a long screw
- Thin wall tool head in order to fit into those tight areas.
- Laser Engraved with MIP Logo and Size of Nut driver
- Color Coded Band to quickly distinguish one size from another.
- Short tool length, as the ergonomics of using the tool are improved in this configuration.
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather, so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of tool production
- Used by World Champions and hobbyists alike around the World
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$119.95 Inc Tax
MIP Hex Driver Wrench Set Gen 2, (3) (1.5, 2.0 & 2.5mm) (Metric) (MIP 9602)
This is a Hex Driver wrench package from MIP which includes the most popular sizes for Metric sized hex-head screws.
For the most reliable tool to tackle hex-head screws, top technicians and racers choose MIP.
Package Includes:
Tool Makeup:
Accolades:
For the most reliable tool to tackle hex-head screws, top technicians and racers choose MIP.
Package Includes:
- 1 x 1.5 mm Hand Wrench w/ label and wrap
- 1 x 2.0 mm Hand Wrench w/ label and wrap
- 1 x 2.5 mm Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
MIP Nut Driver Wrench Set, (2), 5.5mm & 7.0mm (Metric) (MIP 9503)
This is a Metric Nut Driver Wrench Set from MIP which includes the 2 most popular sizes for Metric sized nuts in today's 1/10 and 1/8 vehicles.
The MIP Metric Nut Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rockwell, the same as automotive grade tools! On the surface you will notice these nut drivers are stubbier than traditional drivers, this characteristic allows for a better overall weight balance and reduces tool box space.
A special color coded ring and etched sizing on the shank make it easy to know exactly what size nut driver you are grabbing. The drivers also feature a slim hex wall and deep bore to ensure that you are able to get into the tightest of places and not worry about bottoming out on anything in the process!
Package Includes:
Tool Makeup:
Accolades:
The MIP Metric Nut Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rockwell, the same as automotive grade tools! On the surface you will notice these nut drivers are stubbier than traditional drivers, this characteristic allows for a better overall weight balance and reduces tool box space.
A special color coded ring and etched sizing on the shank make it easy to know exactly what size nut driver you are grabbing. The drivers also feature a slim hex wall and deep bore to ensure that you are able to get into the tightest of places and not worry about bottoming out on anything in the process!
Package Includes:
- 1 x 5.5 mm Hand Nut Driver Wrench
- 1 x 7.0 mm Hand Nut Driver Wrench
Tool Makeup:
- Steel construction, optimized for durability and long wear characteristics
- Nickel Plated for durability and protection against oxidation or corrosion
- Heat Treated to Last a lifetime (70+ Rockwell Hardness)
- Nice deep tool head in order to get to a nut that is located on a long screw
- Thin wall tool head in order to fit into those tight areas.
- Laser Engraved with MIP Logo and Size of Nut driver
- Color Coded Band to quickly distinguish one size from another.
- Short tool length, as the ergonomics of using the tool are improved in this configuration.
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather, so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$79.95 Inc Tax
MIP Bypass1™ Pistons, 6-Hole Set, 16mm, TLR 1/8th (MIP 19030)
NOTICE: These pistons come with 6 x 1.3mm holes so that you may develop the piston package that works best for you. It is recommended to drill them out to a common standard piston hole setup that can be found by any of the top drivers (e.g. Front 4 x 1.3 / 2 x 1.4 & Rear 4 x 1.4 / 2 x 1.3) and use the clear shim in the front and the blue shim in the rear.
The Future is Bypass1™, the Future is MIP!
The Future is Bypass1™, the Future is MIP!
The MIP Bypass1™ pistons for the 1/8th Mugen were a HUGE SUCCESS! The overall performance and satisfaction of racers who ran the Bypass1™ Pistons exceeded everyone expectations!
Now the Bypass1™ technology has arrived for the next set of 1/8th scale vehicles: TLR!
Just like our Mugen Bypass1™ Pistons, these pistons will not be like anything you have ever experienced before. The MIP Bypass1™ pistons are fully customizable and allow you to truly control your cars rebound speed and performance. MIP Bypass1™ Pistons are also Dyno-Tuned to ensure they match the compression characteristics of the stock pistons!
Featuring MIP Color Coded Valves™, MIP Bypass1™ Pistons combined together with our valves allow you to control and maximize your cars shocks performance based on which valves you use. Thicker valves generate a slower rebound and thinner vales get you quicker rebounds. Mix and match valves together and find the best set up for you and your car!
MIP Bypass1™ pistons are being used by some of the top racers in the world, including Adam Drake and Ryan Maifield. The MIP Bypass1™ technology is guaranteed to give you that world champion edge on the track!
The MIP Bypass1™ technology is here to stay, and will be the STANDARD in RC Racing throughout the universe. Don’t get left behind. The future of of RC Racing is here , order your MIP Bypass1™ Kits today.
MIP Color Coded Valves™
Different color valves allow you to identify which thickness valve you're using. The result? You can tune your shocks to optimize your car's performance. Stack the valves for even more fine tuning!
Valve Designation:
.003 Green Fast Rebound Valve
.005 Blue Medium Rebound Valve
.007 Clear Slow Rebound Valve
.010 Brown Neutral Valve
.004 Tan Gap Valve
Drill out Bypass1™ Pistons to your spec!
Our Pistons feature 1.3mm pre-drilled holes which allow you to easily drill them out to custom hole sizes. For instance, you can drill 3 holes at Ø1.35mm and the other 3 at Ø1.50mm with Avid's handy Piston Drill Set. Another advantage of Bypass1™ Technology!
MIP Dyno tunes our pistons to ensure they match the compression characteristics of the stock pistons! The result? MIP can guarantee our Bypass1™ Pistons duplicate the stock pistons with precision and accuracy along with unparalleled quality, providing you with the most optimized feel in your shocks.
Packet includes:
Advantages:
1st Time Setup Tips:
What Bypass1™ Does for the car / you
Testimonies:
Accolades:
Features:
Now the Bypass1™ technology has arrived for the next set of 1/8th scale vehicles: TLR!
Just like our Mugen Bypass1™ Pistons, these pistons will not be like anything you have ever experienced before. The MIP Bypass1™ pistons are fully customizable and allow you to truly control your cars rebound speed and performance. MIP Bypass1™ Pistons are also Dyno-Tuned to ensure they match the compression characteristics of the stock pistons!
Featuring MIP Color Coded Valves™, MIP Bypass1™ Pistons combined together with our valves allow you to control and maximize your cars shocks performance based on which valves you use. Thicker valves generate a slower rebound and thinner vales get you quicker rebounds. Mix and match valves together and find the best set up for you and your car!
MIP Bypass1™ pistons are being used by some of the top racers in the world, including Adam Drake and Ryan Maifield. The MIP Bypass1™ technology is guaranteed to give you that world champion edge on the track!
The MIP Bypass1™ technology is here to stay, and will be the STANDARD in RC Racing throughout the universe. Don’t get left behind. The future of of RC Racing is here , order your MIP Bypass1™ Kits today.
MIP Color Coded Valves™
Different color valves allow you to identify which thickness valve you're using. The result? You can tune your shocks to optimize your car's performance. Stack the valves for even more fine tuning!
Valve Designation:
.003 Green Fast Rebound Valve
.005 Blue Medium Rebound Valve
.007 Clear Slow Rebound Valve
.010 Brown Neutral Valve
.004 Tan Gap Valve
Drill out Bypass1™ Pistons to your spec!
Our Pistons feature 1.3mm pre-drilled holes which allow you to easily drill them out to custom hole sizes. For instance, you can drill 3 holes at Ø1.35mm and the other 3 at Ø1.50mm with Avid's handy Piston Drill Set. Another advantage of Bypass1™ Technology!
MIP Dyno tunes our pistons to ensure they match the compression characteristics of the stock pistons! The result? MIP can guarantee our Bypass1™ Pistons duplicate the stock pistons with precision and accuracy along with unparalleled quality, providing you with the most optimized feel in your shocks.
Packet includes:
- 4 x 6 - Hole 1.3 mm MIP Bypass1™ Pistons
- 5 x .003 Green (Fast Rebound Valve)
- 5 x .005 Blue (Medium Rebound Valve)
- 5 x .007 Clear (Slow Rebound Valve)
Advantages:
- 1.3 mm pre-drilled holes, adjust to your normal hole size setup easily and enjoy the added benefit of Bypass1™ Tech.
- Control rebound speed with MIP Color Coded Valves
- Different valve thicknesses allow adjustable rebound speeds.
- Stacking valves allows for fine tuning adjustments when needed.
1st Time Setup Tips:
- Drill out MIP Bypass1™ pistons to your current setup and use the same oil setup you used too.
- Add 1 of the clear valve on top of each piston as a starting point front and rear.
- Bench test the suspension and drop test, the pack should be the same as your stock pistons that you were running. Rebound rate is now changed with the .005 Medium valve.
- If your suspension feels sluggish drop the valve to green .003 if you feel its too fast bump it up to .007 or stacking valves is possible once you get to .010 in adjustment its almost a 1 to 1 rate of rebound vs compression.
- If you feel that the suspension is still to sluggish at .003 drop 2.5 - 5.0 wt in oil, to get the right rebound vs pack you are looking for.
- Remember you can stack valves for that fine rebound adjustment. Put the lightest valve first then add thicker valves on top.
What Bypass1™ Does for the car / you
- Car - Increased vehicle responsiveness
- Car - Increased stability
- Car - More Predictable
- Car - Increased jumping, landing, corning and rough track efficiency
- You - Feel more connected
- You - Driving confidence goes up
- You - Pushing the car to the limit is more comfortable
Testimonies:
- Bypass1™ is going to become the 'Standard' for all RC Cars. You gain so much confidence when using the Bypass1™ piston technology that simply not using them isn't an option. I just can't take them out, its that much of an advantage. Oh, and the setup tunability with the Bypass1™ Valves is nearly limitless. - Adam Drake, Mugen Seiki
- Bypass1™ Technology for RC vehicles was developed in 2010 by MIP and has since progressed to where it is today, a champion in the racing market! Whether it be 1/10, 1/8, or 1/5 you will feel the difference that the MIP Bypass1™ technology does for your vehicle and for your driving confidence. Put in the pistons dial in your setup and start winning! - Matt Olson - MIP
Accolades:
- TQ after Semis @ 2018 1/8 Worlds, Australia - Ryan Maifield - Mugen Seiki
- Countless TQ / Wins from Adam Drake around the country dating back to May 2018 (prototype stages 1/8)
- Countless TQ / Wins at National and Regional Events 1/5 Scale 2014-2018 (Bypass1™ Tech)
Features:
- Precision Machined Bearing Grade Pistons
- Precision Stamped Valves
- Manufactured 100% in the USA
Trying to get the most from your setup
Out of Stock
$76.95 Inc Tax
MIP Speed Tip™ Hex Driver Wrench Set, Metric (3): 2.0, 2.5 & 3.0mm (MIP 9516)
This is a packet of (3) Speed Tip™ Hex Driver Wrenches from MIP.
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
Tool Makeup:
Accolades:
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
- 1 x 2.0mm Speed Tip™ Wrench w/ label and wrap
- 1 x 2.5mm Speed Tip™ Wrench w/ label and wrap
- 1 x 3.0mm Speed Tip™ Wrench w/ label and wrap
Tool Makeup:
- Fits any 1/4" inch chuck handle or drill in order to speed up wrench time!
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$69.95 Inc Tax
MIP Speed Tip™ Hex Driver Wrench Set, Metric (3): 1.5, 2.0 & 2.5mm (MIP 9512)
This is a packet of (3) Speed Tip™ Hex Driver Wrenches from MIP.
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
Tool Makeup:
Accolades:
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
- 1 x 1.5mm Speed Tip™ Wrench w/ label and wrap
- 1 x 2.0mm Speed Tip™ Wrench w/ label and wrap
- 1 x 2.5mm Speed Tip™ Wrench w/ label and wrap
Tool Makeup:
- Fits any 1/4" inch chuck handle or drill in order to speed up wrench time!
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$69.95 Inc Tax
MIP Nut Driver Wrench, 5.0mm (Metric) (MIP 9702)
This is a 5.0mm Metric Nut Driver Wrench from MIP.
The MIP Metric Nut Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rockwell, the same as automotive grade tools! On the surface you will notice these nut drivers are stubbier than traditional drivers, this characteristic allows for a better overall weight balance and reduces tool box space.
A special color coded ring and etched sizing on the shank make it easy to know exactly what size nut driver you are grabbing. The drivers also feature a slim hex wall and deep bore to ensure that you are able to get into the tightest of places and not worry about bottoming out on anything in the process!
Package Includes:
Tool Makeup:
Accolades:
The MIP Metric Nut Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rockwell, the same as automotive grade tools! On the surface you will notice these nut drivers are stubbier than traditional drivers, this characteristic allows for a better overall weight balance and reduces tool box space.
A special color coded ring and etched sizing on the shank make it easy to know exactly what size nut driver you are grabbing. The drivers also feature a slim hex wall and deep bore to ensure that you are able to get into the tightest of places and not worry about bottoming out on anything in the process!
Package Includes:
- 1 x 5.0 mm Hand Nut Driver Wrench
Tool Makeup:
- Steel construction, optimized for durability and long wear characteristics
- Nickel Plated for durability and protection against oxidation or corrosion
- Heat Treated to Last a lifetime (70+ Rockwell Hardness)
- Nice deep tool head in order to get to a nut that is located on a long screw
- Thin wall tool head in order to fit into those tight areas.
- Laser Engraved with MIP Logo and Size of Nut driver
- Color Coded Band to quickly distinguish one size from another.
- Short tool length, as the ergonomics of using the tool are improved in this configuration.
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather, so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
Highly regarded as the #1 Tool in the RC industry
MIP Hex Driver Allen Wrench 2.0mm (Gen2) (MIP 9208)
This is a 2.0mm Hex Driver Wrench from MIP.
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
Tool Makeup:
Accolades:
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
- 1 x 2.0mm Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
MIP Hex Gen2 Driver Allen Wrench 3.0mm (MIP 9211)
This is a 3.0mm Hex Driver Wrench from MIP.
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
Tool Makeup:
Accolades:
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
- 1 x 3.0mm Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
MIP Hex Driver Allen Wrench 0.050 inch (MIP 9000)
This is a 0.050 inch Hex Driver Wrench from MIP.
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
Tool Makeup:
Accolades:
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
- 1 x 0.050 inch Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$34.95 Inc Tax
MIP Hex Driver Allen Wrench 1.5mm (MIP 9007)
This is a 1.5mm Hex Driver Wrench from MIP.
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
Tool Makeup:
Accolades:
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
- 1 x 1.5mm Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$34.95 Inc Tax
MIP Turnbuckle Wrench (5mm) (Gen 2) (MIP 9850)
This is a 5mm Gen 2 Metric Turnbuckle Wrench from MIP.
Package Includes:
Tool Makeup:
Accolades:
The MIP 5.0mm Turnbuckle Wrench Gen 2 is the next generation tool from MIP that will take your RC to the next level. This heavy-duty wrench is made of steel construction and is manufactured and packaged 100% in the USA. It is the perfect tool for RC enthusiasts who demand the best.
With its large shank design, you can get the leverage you need to tighten and loosen turnbuckles with ease. The laser-engraved size identification and color-coded size ring make it easy to identify and use the correct size wrench for the job. And the slim profile allows it to fit into small, hard-to-reach spaces.
Plus, it can also be used for hard-to-reach 5.0mm nuts! This makes it a versatile tool that can be used for a variety of RC maintenance and repair tasks.
This is more than just a wrench. It's a tool that will help you take your RC to the next level. With its superior craftsmanship and durability, you can be sure that this wrench will last for years to come.
So if you're looking for a tool that will help you get the most out of your RC, then the #9850 - MIP 5.0mm Turnbuckle Wrench Gen 2 is the perfect choice for you. Order yours today and experience the #MIPDifference!
Package Includes:
- 1 x 5.00 mm Turnbuckle Wrench
Tool Makeup:
- Angled tool head to be ergonomically more friendly when using the tool vs a straight cut.
- Tolerances within +/- .001" (~ 0.03 mm)
- Tiny MIP amber handle
- Engraved sizing
- Steel construction
- Color coded size ring
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
Highly regarded as the #1 Tool in the RC industry
MIP Hex Driver Allen Wrench 2.5mm (Ball End) (MIP 9010)
This is a 2.5mm Ball End Hex Driver Wrench from MIP.
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
Tool Makeup:
Accolades:
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
- 1 x 2.5mm Ball End Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
Out of Stock
$34.95 Inc Tax
MIP Hex Driver Allen Wrench 2.0mm (Ball End) (MIP 9040)
This is a 2.0mm Ball End Hex Driver Wrench from MIP.
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
Tool Makeup:
Accolades:
Product Overview:
MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Package Includes:
- 1 x 2.0mm Ball End Hand Wrench w/ label and wrap
Tool Makeup:
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather conditions.
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
MIP Turnbuckle Wrench (5.5mm) (Gen 2) (MIP 9855)
This is a 5.5mm Gen 2 Metric Turnbuckle Wrench from MIP.
Package Includes:
Tool Makeup:
Accolades:
The MIP 5.5mm Turnbuckle Wrench Gen 2 is the next generation tool from MIP that will take your RC to the next level. This heavy-duty wrench is made of steel construction and is manufactured and packaged 100% in the USA. It is the perfect tool for RC enthusiasts who demand the best.
With its large shank design, you can get the leverage you need to tighten and loosen turnbuckles with ease. The laser-engraved size identification and color-coded size ring make it easy to identify and use the correct size wrench for the job. And the slim profile allows it to fit into small, hard-to-reach spaces.
Plus, it can also be used for hard-to-reach 5.5mm nuts! This makes it a versatile tool that can be used for a variety of RC maintenance and repair tasks.
This is more than just a wrench. It's a tool that will help you take your RC to the next level. With its superior craftsmanship and durability, you can be sure that this wrench will last for years to come.
So if you're looking for a tool that will help you get the most out of your RC, then the #9855 - MIP 5.5mm Turnbuckle Wrench Gen 2 is the perfect choice for you. Order yours today and experience the #MIPDifference!
Package Includes:
- 1 x 5.5 mm Turnbuckle Wrench
Tool Makeup:
- Angled tool head to be ergonomically more friendly when using the tool vs a straight cut.
- Tolerances within +/- .001" (~ 0.03 mm)
- Tiny MIP amber handle
- Engraved sizing
- Steel construction
- Color coded size ring
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
Highly regarded as the #1 Tool in the RC industry
MIP 1/10 Turnbuckle Wrench (4mm) (Yokomo/Tekno/TLR) (MIP 9715)
This is a 4mm Metric Turnbuckle Wrench from MIP.
MIP’s tiny amber handle perfectly complements MIP’s current tool line and gives your hand plenty of surface area to grip and adjust turnbuckles effortlessly. The 4.00mm size fits turnbuckles on Losi, Tekno and Yokomo 1/10 scale models.
Package Includes:
Tool Makeup:
Accolades:
MIP’s tiny amber handle perfectly complements MIP’s current tool line and gives your hand plenty of surface area to grip and adjust turnbuckles effortlessly. The 4.00mm size fits turnbuckles on Losi, Tekno and Yokomo 1/10 scale models.
Package Includes:
- 1 x 4.00 mm Turnbuckle Wrench (TLR / Yokomo / Traxxas)
Tool Makeup:
- Angled tool head to be ergonomically more friendly when using the tool vs a straight cut.
- Tolerances within +/- .001" (~ 0.03 mm)
- Tiny MIP amber handle
- Engraved sizing
- Steel construction
- Color coded size ring
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
Highly regarded as the #1 Tool in the RC industry
MIP Speed Tip™ Hex Driver Wrench, Metric: 2.0mm (MIP 9008S)
This is a 2.0mm Speed Tip™ Hex Driver Wrenches from MIP.
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
Tool Makeup:
Accolades:
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
- 1 x 2.0mm Speed Tip™ Wrench w/ label and wrap
Tool Makeup:
- Fits any 1/4" inch chuck handle or drill in order to speed up wrench time!
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
MIP Speed Tip™ Hex Driver Wrench, Metric: 1.5mm (MIP 9007S)
This is a 1.5mm Speed Tip™ Hex Driver Wrenches from MIP.
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
Tool Makeup:
Accolades:
The MIP Metric Speed Tip™ Hex Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.
Package Includes:
- 1 x 1.5mm Speed Tip™ Wrench w/ label and wrap
Tool Makeup:
- Fits any 1/4" inch chuck handle or drill in order to speed up wrench time!
- Tool hex cut with diamond wheel for ultimate precision
- Tool shank CNC ground from US Grade tool steel drill blanks
- Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
- Every tool assembled by hand
- Manufactured and packaged 100% in the USA
Accolades:
- Highly regarded as the #1 Tool in the RC industry
- 20 plus years of production
- Used by World Champions and hobbyists alike around the World
- Trusted wrench to get out stripped screws other sub par tools create
Highly regarded as the #1 Tool in the RC industry
- 1