Specials

This is a packet of (2) Shock Springs from VBC Racing for their WildFire Touring Cars.

This is a packet of (4) Rear Shock Shafts from Agama for their A8, A215 Buggy and A8T Truggy.

This is a packet of (2) 20 Degree Front Hub Carriers from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.

This is a Front Torque Rod from Kyosho to fit their Inferno MP7.5 buggies but may fit other models.

This is the torque rod that connects from the front bulkhead to the chassis to provide increased stiffness and rigidity to the chassis. Many racers replace these torque rods with optional CNC milled versions that are stiffer, but sometimes for very bumpy track conditions the stock torque rods can make the buggy more forgiving.

This is a packet of (4) 3 hole TBB Shock Piston from VBC Racing.

This is a packet of (10) Axle Lock Spring from VBC Racing for their WildFire Touring Cars.

This is a packet of (2) AVID Racing Concepts 5 to 4mm gold plated battery bullets which are excellent for putting on your charger so that you may charge both battery bullet sizes with ease.

They also feature the low profile head design to keep your wire setup nice and clean looking.

Specifications:

• Gold plated plug from 5mm to 4mm thick.
• Battery stem 16.00mm long, low profile post 3.00mm tall, and total length 19mm.

Packet includes:

• 2 x 5mm to 4mm gold plated battery bullets

This is a packet of (2) Front Shock Shafts from Agama for their A8T & A215T Truggies.

This is a Shock Seals and Guides Maintenance Pack from Agama for their A8, A215 Buggy and A8T Truggy.

This is a 51Tooth 1st Spur Gear from Kyosho to fit their On-Road FW-06 race car.

This is a 1/16" Allen Hex Wrench replacement Tip from Protek.

This is a 3/32" Ball End Allen Hex Wrench replacement Tip from Protek.

This is a packet of (2) Front Shock Shafts from Agama for their A8 Buggy.

This is a packet of (2) 3x29.5mm Suspension Shafts from Kyosho included in their 1/8 MP9 buggy kits.

This is a packet of front stabilizer set from VBC Racing for their WildFire Touring Car kits.

This is a packet of (20) M3x10 Set Screws from VBC Racing.

This is a packet of (4) Steering Swivel Tubes from VBC Racing for their WildFire Touring Cars.

This is a Steering Stiffener Bar from VBC Racing for their WildFire Touring Cars.

This is a 6.8mm Steering Ball Set from Team Losi Racing compatible with their 8ight family of vehicles.


NOTE: These are not to fit a 8IGHT-X

This is a packet of (2) 3x35mm Suspension Shafts from Kyosho included in their 1/8 MP9 buggy kits.

This is a packet of (2) carbon fibre plates designed to protect the body of 1/10 touring car where the rear wing mounts

Features:

1. For: On Road Cars
2. Color: carbon fibre

This is a 4x57mm Shock Shaft from Team Losi Racing for their 8IGHT racing buggy and 8ight-T Truggy 1.0 & 2.0.

This is a packet of (2) 1/10 "EVO" 4WD Buggy Closed Cell Front Tire Inserts from AKA Racing.

AKA, the pioneer of the closed cell insert, has developed an insert specifically for use with AKA EVO 1/10 scale buggy tires.

These inserts were designed to decrease the lateral deflection of the tire while at the same time increasing vertical impact absorption, to provide better handling in the bumps.

Using a soft foam or hollowing out the inner circumference leaves the car feeling squirmy with a less accurate feeling through the bumps, not to mention a loss of durability. Gil Losi and Mark Pavidis knew this compromise was not the solution. The solution they found was the addition of lateral grooves to the inner diameter. The lateral grooves allow the insert to flex vertically, absorbing large impacts while still maintaining the lateral stability and overall durability AKA inserts are known for, providing you with a no compromise, high performance foam insert. The result is a more predictable handling car, with no sacrifice in insert durability.

This is a packet of (2) 1/10 "EVO" 2.2 4WD Front White Wheels from AKA Racing.

These wheels are compatible with the Associated B44 family of buggies. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by adapting the L-shaped 1/8 buggy bead to the smaller 1/10 wheels.

The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. NOTE: These wheels are only compatible with AKA "EVO" tires.

This is a packet of (2) 1/10 "EVO" 2.2 4WD Front White Wheels from AKA Racing.

These wheels are compatible with the TLR 22 1.0 and 2.0 buggies with a 10mm front hex. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by adapting the L-shaped 1/8 buggy bead to the smaller 1/10 wheels.

The EVO wheel has been redesigned to be stronger and stiffer. The EVO wheel features pre-punched vent holes in the wheel, combined with the L-shape bead that makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. NOTE: These wheels are only compatible with AKA "EVO" tires.

This is a 1/8 Front Bumper from Kyosho for their older 1/8 buggies and truggies.

This is a packet of (8) Suspension Pin Bushings (Hollow Type) from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.

This is a packet of (8) Suspension Pin Bushings from Agama for their A8/ A8T/A215/A215E/A215T/A215SV Vehicles.

This is a packet of (3) Throttle Brake Links from Agama for their A8, A215 Buggy and A8T Truggy.

This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.

Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.

Features:

1. Compatible to all graphite plate chassis design
2. Material: Aluminium & Rubber
3. Color: Blue

Packet includes:

1. 10x O-Ring Washer
2. 10x O-Ring

This is a packet of (10) Chassis Tweak Adjustment Washers and O-rings designed to enhance consistent grip and reduce chassis tweak that can develop during crashes.

Note: When installing the washer, please do not fix the screw too firm. You must keep some gap under the washer to avoid obstructing the chassis.

Features:

1. Compatible to all graphite plate chassis design
2. Material: Aluminum & Rubber
3. Color: Black

Packet includes:

1. 10x O-Ring Washer
2. 10x O-Ring

This is a Rear Chassis Brace from Team Losi Racing for their 8ight racing buggy and 8ight-T Truggy 1.0, 2.0 & 3.0.