22 3.0 SR Buggy Parts

Sort By:  
Fits TLR shock prior to the new 22 5.0 and 22x-4
$59.50  Inc Tax
Fits TLR shock prior to the new 22 5.0 and 22x-4
$59.50  Inc Tax
Add strength and weight to the front of your 2wd buggy
Out of Stock
$55.25  Inc Tax
Fits all TLR ball differentials
Out of Stock
$54.95  Inc Tax
Fits all of the 22 series of 1/10 2wd vehicles
Out of Stock
$52.50  Inc Tax
Fits most 1/10 scale off-road buggies
$47.95  Inc Tax
Complete set of bearings
Out of Stock
$39.95  Inc Tax
For most 1/10 TLR racing buggy
$39.95  Inc Tax
Adds strength and bling
$34.95  Inc Tax
Adds strength and bling
$34.95  Inc Tax
Fits most of the TLR 22 Buggies and Trucks
$34.50  Inc Tax
Fits most 1/10 scale off-road buggies
Out of Stock
$33.95  Inc Tax
Serrated surface for additional holding power
$33.50  Inc Tax
Fits most TLR 22 2wd and 4wd kits
Out of Stock
$29.95  Inc Tax
Includes a handy plastic storage case
Out of Stock
$27.50  Inc Tax
Fits most of the TLR 22 Buggies and Trucks
Out of Stock
$25.75  Inc Tax
Fit threaded ball ends with ease
Out of Stock
$24.95  Inc Tax
Fits most of the 22 series of 1/10 vehicles
$24.95  Inc Tax
Serrated surface for additional holding power
$24.95  Inc Tax
Fits most TLR 22 2wd and 4wd kits
Out of Stock
$23.95  Inc Tax
Fits most TLR 22 2wd kits
$23.95  Inc Tax
Fits All 1/10 TLR 22 shocks
$23.95  Inc Tax
Serrated surface for additional holding power
$23.25  Inc Tax
Serrated surface for additional holding power
Out of Stock
$23.25  Inc Tax
Fits most TLR 22 2wd and 4wd kits
$22.95  Inc Tax
Put your race car on a diet
Out of Stock
$22.95  Inc Tax
Perfect for 17.5 Stock Racing
Out of Stock
$22.25  Inc Tax
Perfect for 17.5 Stock Racing
Out of Stock
$22.25  Inc Tax
Fits most of the TLR 22 Buggies and Trucks
Out of Stock
$21.95  Inc Tax
Put your race car on a diet
Out of Stock
$21.95  Inc Tax
Put your race car on a diet
$21.95  Inc Tax
Fits most of the 22 series of 1/10 vehicles
Out of Stock
$21.75  Inc Tax
Does NOT fit the earlier Losi 22 and 22 2.0 models
$20.95  Inc Tax
Does NOT fit the earlier Losi 22 and 22 2.0 models
$20.25  Inc Tax
Fits on the rear of all TLR 1/10 22 Buggies
Out of Stock
$20.25  Inc Tax
Fits on the rear of all TLR 1/10 22 Buggies
$20.25  Inc Tax
Fits most TLR 22 Buggy kits
$20.00  Inc Tax
$26.95
Increases High Speed Steering
Out of Stock
$19.95  Inc Tax
Fits most of the 22 series of 1/10 vehicles
$19.95  Inc Tax
Fits most 1/10 2wd buggies
$19.95  Inc Tax
Increases High Speed Steering
Out of Stock
$19.95  Inc Tax
Fits most TLR 22 2wd & 4wd kits
Out of Stock
$19.95  Inc Tax
Fits most 1/10 scale off-road buggies
$19.95  Inc Tax
Fits many models, check your manual first
Out of Stock
$19.95  Inc Tax
Perfect for 17.5 Stock Racing
$19.75  Inc Tax
Does NOT fit the earlier Losi 22 and 22 2.0 models
$18.95  Inc Tax
Does NOT fit the earlier Losi 22 and 22 2.0 models
$18.95  Inc Tax
Fits most of the TLR 22 Buggies and Trucks
Out of Stock
$18.75  Inc Tax
Narrow profile provides more consistent front grip, & more steering in high load turns
$17.95  Inc Tax
Fits most TLR 22 Buggy kits
$17.50  Inc Tax
Fits all 2wd TLR 22 Kits
Out of Stock
$16.95  Inc Tax
Allows you to tune the Rear Suspension
$14.50  Inc Tax
Used in most TLR 1/10 kits
$13.75  Inc Tax
Fits most of the 22 series of 1/10 vehicles
Out of Stock
$13.75  Inc Tax
Fits most of the 22 series of 1/10 vehicles
$13.00  Inc Tax
$25.75
Optional Rear Hub Carrier
$12.95  Inc Tax
Serrated surface for additional holding power
Out of Stock
$12.00  Inc Tax
Perfect for 17.5 Stock Racing
$11.75  Inc Tax
Fits most of the 22 series of 1/10 vehicles
$10.00  Inc Tax
$22.95
Common TLR Front Shock Shaft
Out of Stock
$10.00  Inc Tax
$14.50
Used on Rear of 2wd Buggies & Front of Trucks
Out of Stock
$10.00  Inc Tax
$14.50
Fits most of the TLR 22 Buggies and Trucks
$10.00  Inc Tax
$17.75
Fits all TLR ball differentials
$8.95  Inc Tax
Fits All of the 22 series of 1/10 vehicles
$8.50  Inc Tax
Add bling to your ride
Out of Stock
$7.50  Inc Tax
Fits most TLR 22 Buggy kits
$7.00  Inc Tax
$9.95
Common bearing used in TLR ball differential.
$5.00  Inc Tax
$22.50
Designed for 3rd Gen TLR 22 range
$5.00  Inc Tax
$7.50
Team Losi Racing Rear Shock Body (2): TLR 22 / 22-4 (TLR5084)
This is a packet of (2) Rear Shock Bodies from Team Losi Racing for their 22 1.0, 2.0, 3.0 & 4.0 and 22-4 Race Kits
Fits TLR shock prior to the new 22 5.0 and 22x-4
$59.50  Inc Tax
Team Losi Racing Front Shock Body (2): TLR 22 / 22-4 (TLR5083)
This is a packet of (2) Front Shock Bodies from Team Losi Racing for their 22 1.0, 2.0, 3.0 & 4.0 and 22-4 Race Kits
Fits TLR shock prior to the new 22 5.0 and 22x-4
$59.50  Inc Tax
Team Losi Racing Brass Front Pivot Block: TLR 22 (+30g) (TLR334080)
This is a 30g Brass Front Pivot Block from Team Losi Racing designed for their 1/10 2wd 22 range of buggies and trucks. 


• This new brass front pivot fits all of the 22 2wd buggies and trucks. 
• At +30g heavier than the kit composite front pivot, additional weight over the front axles increases on power steering, but does not pin the car over the front end as the +50g pivot can at times. 
• Pivot is the standard height (LRC) and works with the kit kick shims. 
• Works with the included aluminum front hinge pin brace (black version) to help improve wear/durability of the front hinge pin holes.




Add strength and weight to the front of your 2wd buggy
Out of Stock
$55.25  Inc Tax
Team Losi Racing Aluminium Hex Differential Wrench (TLR2950)
This is an Aluminium Hex Differential Wrench from Team Losi Racing which is compatible with all their 1/10 kits running a ball differentials. 


Fits all TLR ball differentials
Out of Stock
$54.95  Inc Tax
Team Losi Racing Aluminium Rear Hex Set: 22 (TLR2930)
This is an Aluminium Rear Hex Set from Team Losi Racing for their 2wd racing buggy.


Fits all of the 22 series of 1/10 2wd vehicles
Out of Stock
$52.50  Inc Tax
Team Losi Racing 1/10 6.5" Precut Medium Downforce Wings (2) (TLR230002)
This is a packet of (2) 6.5" Precut Medium Downforce Wings from Team Losi Racing which are compatible with most 1/10 scale off-road buggies. 
 
The 6.5” wide TLR Medium Downforce Rear Wing provides fantastic grip and stability in all conditions.

 
Features:
  • Made from 1.2mm thick lexan for longer life and has raised end plates for extra tire clearance
  • Three scribe lines across the rear offer repeatable wickerbill trimming options



Fits most 1/10 scale off-road buggies
$47.95  Inc Tax
Team Losi Racing SPEC-Racer Outdrive & Differential Hub Set: 22 3.0 SR & 4.0 SR (TLR232056)
This is a SPEC-Racer Outdrive & Differential Hub Set from Team Losi Racing for their TLR 22 3.0 SR and 4.0 SR buggy race kits.


Package includes:
  • 2x aluminium hubs
  • 2x composite outdrives
  • 2x outdrive support rings
  • 1x diff nut 

Note: These are only compatible with SR aluminium driveshafts. Will not fit standard 22 steel driveshafts.
Reduces rotating weight
$39.95  Inc Tax
Avid Racing Concepts Bearing Kit: TLR 3.0/4.0/5.0/2.0T/3.0T/4.0T (AVD AVLOSI 22 3.0)
This is a full bearing kit by Avid RC for the Team Losi Racing 3.0 / 4.0 / 5.0 Buggies and 2.0T / 3.0T / 4.0T Stadium trucks.

Bearing Kit fits:
  • TLR 22 3.0
  • TLR 22 4.0
  • TLR 22 5.0 DC
  • TLR 22 5.0 SR
  • TLR 22T 2.0
  • TLR 22T 3.0
  • TLR 22T 4.0

Bearing Kit Includes:
  • 10 x 5x10x4 Revolution Bearings
  • 2 x 5x13x3 Revolution Bearings
  • 6 x 5x8x2.5 Metal Bearings
  • 2 x 10x15x4 Revolution Bearings


Complete set of bearings
Out of Stock
$39.95  Inc Tax
AVID RC Lower Shock Mounts | 10th | Titanium (AVD AV10078)
This is a packet of (2) Titanium Lower Shock Mounts from Avid Racing Concepts for the 1/10 TLR racing buggies but may fit other buggies.

Titanium Lower Shock Mounts for 10th scale vehicles make it easy for getting your shocks off and on while not wearing out the plastic from repeated uses. The one design feature we added to this common product is the 6 small holes in each mount. They are not there to lose weight but rather to help keep the mount from backing out as easily when taking the nut off the end, acting as a bit of a serration. 

Key features:

  • Machined from billet 6Al-4V Titanium
  • 6 small holes in each mount to act as a bit of a serration so it will stay in more securely
  • Has a 1.5mm Allen head for installation
  • No threads where your shock eyelet rests
  • Fits common 10th scale vehicles
  • Each package includes (2) lower shock mount screws and (2) aluminium M3 flanged locknuts







For most 1/10 TLR racing buggy
$39.95  Inc Tax
Team Losi Racing 25° Brass Kick Angle Shim: All 2wd 22 Kits (TLR1049)
This is a 25° Brass Kick Angle Shim from Team Losi Racing used to adjust the weight bias on all of their 2wd TLR 22 buggy and truck race kits.

This optional brass ballast weight set will allow you to tune the forward weight bias of your chassis to suit various track conditions and is recommended for carpet track applications.

Package includes:
  • 8.8 G heavier than the stock composite part
  • Lazer etched for easy identification of kick angle and TLR branding

Package includes:
  • 1x 25 degree brass kick shim




Recommended for carpet tracks
$37.75  Inc Tax
Team Losi Racing Bleeder Shock Cap Set (2): TLR 22/22T (TLR5065)

This is a packet of (2) Bleeder Shock Caps from Team Losi Racing for use with the TLR 22 family of vehicles up to version 4.0.

These aluminium shock caps will allow you to rebuild your 22 shocks much easier.

Bleeder Shock Cap Set
$37.50  Inc Tax
AVID RC Ringer Shock Standoffs | 22 5.0 | Set (AVD AV10109-2250)
This is a packet of (4) Ringer Shock Standoffs from Avid Racing Concepts for the 1/10 TLR 22 5.0 racing buggies but may fit other buggies.

The Avid TLR 22 5.0 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) 13mm standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed. 


Key features:

  • Avid TLR 22 5.0 Ringer Shock Standoffs are a direct upgrade for the TLR336010 parts
  • 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
  • Fully threaded part which helps to prevent mount screws from bending so easily.
  • Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.

Package includes:

  • 4x 13mm standoffs
  • 4x Delrin™ pivot bushings
  • 4x SS M3x22 cap screws

Fits: TLR 22 5.0





Adds strength and bling
$34.95  Inc Tax
AVID RC Ringer Shock Standoffs | 22x4 | Set (AVD AV10109-22X4)
This is a packet of (4) Ringer Shock Standoffs from Avid Racing Concepts for the 1/10 TLR 22x4 racing buggies but may fit other buggies.

The Avid TLR 22x4 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed. 


Key features:

  • Avid TLR 22x4 Ringer Shock Standoffs are a direct upgrade for the kit parts
  • 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
  • Fully threaded part which helps to prevent mount screws from bending so easily.
  • Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.

Package includes:

  • 4x standoffs
  • 4x Delrin™ pivot bushings
  • 4x SS M3x22 cap screws

Fits: TLR 22x4





Adds strength and bling
$34.95  Inc Tax
Team Losi Racing Team Losi Racing Grooved Slipper Plates (2): 22/T/SCT (TLR232027)
This is a packet of (2) Optional Grooved Slipper Plates from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.

TLR Race Team has been testing the grooved slipper plates with great results. The machined grooves "scrape" off any build-up that can accumulate on the slipper pad and helps the slipper drive system maintain an ideal surface for proper slipper function. This results in longer slipper pad and plate life, an easier to set slipper, more rear traction under acceleration and improved on track consistency.

Features:
  • Machined grooves allow for any build-up on the slipper pad to be removed from the surface to keep slipper function optimal
  • A tapered backside of the plate strengthens the plate with the slipper to tightened to maintain a flatter and more effective surface for slipper drive to occur
  • Hard Anodized to prevent premature wear and strengthen
  • Grooved Slipper Plates will fit all 22 2wd vehicles (22, 22T, 22SCT) as well as all XXX vehicles including the XXX-SCT


NOTE: Does not fit 22 5.0 Models


Fits most of the TLR 22 Buggies and Trucks
$34.50  Inc Tax
Team Losi Racing 1/10 6.5" Precut Medium Downforce Wings (2) (Light Weight) (TLR230019)
This is a packet of (2) Lightweight 6.5" Precut Medium Downforce Wings from Team Losi Racing which are compatible with most 1/10 scale off-road buggies. 
 
The 6.5” wide TLR Medium Downforce Rear Wing provides fantastic grip and stability in all conditions.

 





Fits most 1/10 scale off-road buggies
Out of Stock
$33.95  Inc Tax
Avid Racing Concepts 4mm Aluminium Serrated Lock Nuts, Red (4) (AVD AV10097-RED)
This is a packet of (4) Red M4 Aluminium Serrated Lock Nuts from Avid Racing Concept.

The Avid M4 Ringer Wheel Nuts are designed to be the strongest all-around wheel nut for offroad and touring car racing. The 11mm flange provides the needed support from potential wheel flex on high bite tracks.
A thin 3.5mm thickness keeps weight down but also allows the nut to be used on 4wd fronts and if you cut your axles to length you will grab fewer pipes with them too. They included *aggressive serrations so you don't have to tighten the wheel nut as much which helps in not deforming the wheel and ensures you will never pull the 7075-T6 threads out.
And last but not least, the two silver highlights don't get lost on a white wheel giving you that extra pop.

Tips
* Since 2017, the Avid RC proven serration design is best used by turning the nut to where it begins to tighten up on the wheel and then just give it two haptic clicks. Avid RC recommend trying it on the bench and unscrewing it after you do it so feel how much hold their nut actually has. No more need to deform your wheel or risk of pulling your threads out by overtightening.


Specifications:

  • Made from 7075-T6.
  • 11mm flange to support wheel flex on high bite tracks.
  • Thin design at 3.5mm thick so they can also be used on 4wd fronts.
  • Aggressive serrations to ensure you never pull your threads or deform your wheel.
  • Fits all modern 10th scale vehicles in offroad and onroad (AE, TLR, HB, KYO, XRAY, YOK) (M4x0.7)
  • Available colors: Black, Blue, Red, Pink, Orange, and Silver.
  • Each package includes 4 Ringer wheel nuts.

Serrated surface for additional holding power
$33.50  Inc Tax
Team Losi Racing 3/32 Tungsten Carbide Diff Ball Set (14) (TLR2951)
This is a packet of (14) 3/32 Tungsten Carbide Diff Balls from Team Losi Racing which are compatible with most of their TLR 22 series vehicles. 

Fits most TLR 22 2wd and 4wd kits
Out of Stock
$29.95  Inc Tax
Metric M3 Screw and Washers Set (340 pieces) (SCREWBOX-SML)
This is a 340 piece Metric M3 Screw and Washers Set


Package Include:
  • 340 M3 Screws of various sizes from 6mm to 12mm
  • M3 & M4 Washers
  • 1 x Handy plastic storage case

Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.

Compatible with:

Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Includes a handy plastic storage case
Out of Stock
$27.50  Inc Tax
Team Losi Racing Idler Gear & Shaft Set (2): TLR 22 (TLR2966)
This is a packet of (2) Idler Gears & Shafts from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.

NOTE: Does not fit 22 5.0 Models


Fits most of the TLR 22 Buggies and Trucks
Out of Stock
$25.75  Inc Tax
Team Losi Racing Ball Cup Wrench, (4.8mm): 22/T/SCT (TLR72000)
This is a Ball Cup Wrench from Team Losi Racing designed for easily installing 4.8mm ball ends. Remember to add black grease to the thread when installing ball ends.
Fit threaded ball ends with ease
Out of Stock
$24.95  Inc Tax
Team Losi Racing HD Ball Cup Set (TLR234107)
This is a packet of HD Ball Cups from Team Losi Racing.


Fits most of the 22 series of 1/10 vehicles
$24.95  Inc Tax
AVID Racing Concepts Triad M4 Light Wheel Nuts (Hard Anodized) (4) (AVD AV1047-HCA)
This is a packet of (4) Hard Anodized 4mm Serrated Wheel Nuts from AVID Racing Concepts.

The Avid Triad M4 Light Weight Wheel Nuts are possibly the lightest 10th scale wheel nuts on the market (0.3g/ea). The unique Triad design utilizes only three corners of the nut instead of 6 to give the nut its lighter weight. But don't think this takes away from the torque handling capabilities. With a quality wheel wrench you can crank these puppies down and the serrations will add the confidence you need for keeping them as you shred that PVC.

Specifications:
  • Extremely light weight serrated wheel, coming in at 0.3g/ea.
  • Unique Triad 3 cornered nut, uses common 7mm wheel wrenches.
  • Serrated to ensure they stay on while you’re showing the pipe who’s the boss. *Updated 12/1/15
  • Fits all modern 10th scale vehicles in offroad and onroad (AE, TLR, HB, KYO, XRAY, YOK) (M4x0.7)
  • Available colors: Black, Red, Blue, Pink, Green, Purple, Orange and Hard Anodized.
  • Each package includes 4 Triad wheel nuts and 1 AVID mini decal sheet.



Serrated surface for additional holding power
$24.95  Inc Tax
Team Losi Racing Complete Gen II Rear Hub Set (TLR234075)
This is a Complete GenII Rear Hub Set from Team Losi Racing which combines the light weight advantages of a composite hub, with the security of an aluminium ball stud mount. 

The hub base is molded composite, allowing a press bearing fit without play and minimal un-sprung weight compared to an aluminium hub. The aluminium plate is secured to the hub with a M3 screw and ball stud, and supports the ball stud.

By using an aluminium base, the ball stud is held securely to the hub and reduces the risk of the ball stud pushing or pulling out and coming loose.


Fits most TLR 22 2wd and 4wd kits
Out of Stock
$23.95  Inc Tax
Team Losi Racing Drive Rings (2): 22, 22SCT, 22T (TLR2954)
This is a packet of (2) Diff Rings from Team Losi Racing which are compatible with most of their TLR 22 series vehicles with Ball Diffs. 

Fits most TLR 22 2wd kits
$23.95  Inc Tax
Team Losi Racing Shock Cap Bottom Set (2): 1/10 TLR (TLR5086)
This is a packet of (2) Shock Cap Bottoms from Team Losi Racing for their full 22 2wd and 4wd Race Kits
Fits All 1/10 TLR 22 shocks
$23.95  Inc Tax
Team Losi Racing 4mm Aluminum Serrated Lock Nuts, Black (6) (TLR336000)
This is a packet of (6) Black 4mm Aluminum Serrated Lock Nuts from Team Losi Racing.

These lightweight aluminium locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs.

Features:

  • Made from lightweight aluminium
  • Serrated surface for additional holding power

Serrated surface for additional holding power
$23.25  Inc Tax
Team Losi Racing 4mm Aluminium Serrated Lock Nuts, Black (6) (LOSB3992)
This is a packet of (6) Black 4mm Aluminium Serrated Lock Nuts from Team Losi Racing.

These lightweight aluminium locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs.

Features:

  • Made from lightweight aluminium
  • Serrated surface for additional holding power
Serrated surface for additional holding power
Out of Stock
$23.25  Inc Tax
Team Losi Racing 5.5mm Slipper & Clicker Adjustment Tool: 22-4 (TLR72002)
This is a 5.5mm Slipper & Clicker Adjustment Tool from Team Losi Racing designed for making adjustments on a TLR 22-4 however as it is 5.5mm and short it is very hand for removing inner mounting nut on the front shocks of a 2wd TLR 22 buggies when you need to alter the mounting location of the shocks. 

5.5mm Nut driver
$22.95  Inc Tax
Team Losi Racing Complete Gen II Rear Hub Set (+3mm): 22 4.0 (TLR234088)
This is a Complete GenII (+3mm) Rear Hub Set from Team Losi Racing which combines the light weight advantages of a composite hub, with the security of an aluminium ball stud mount. 

These are the replacement +3.5 rear hubs for the 22 4.0, but are compatible with the full range of 22 series vehicles. 

The hub base is molded composite, allowing a press bearing fit without play and minimal un-sprung weight compared to an aluminium hub. The aluminium plate is secured to the hub with a M3 screw and ball stud, and supports the ball stud.

By using an aluminium base, the ball stud is held securely to the hub and reduces the risk of the ball stud pushing or pulling out and coming loose.

Features:

  • Molded Composite Hub
  • Aluminium Ball Stud Plate
  • Compatible with all 22 series vehicles



Fits most TLR 22 2wd and 4wd kits
$22.95  Inc Tax
Team Losi Racing 4.8x8mm Ball Stud Set (2) (Titanium) (TLR6031)
This is a packet of (2) Titanium 4.8x8mm Ball Studs from Team Losi Racing. 


Put your race car on a diet
Out of Stock
$22.95  Inc Tax
Team Losi Racing 69 tooth 48 Pitch Direct Drive Spur Gear (TLR332047)
This is a 69 tooth 48 Pitch Direct Drive Spur Gear from Team Losi Racing which are compatible with most of the TLR 22 series vehicles running TLR Direct Drive System (TLR332043). 

Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.


Perfect for 17.5 Stock Racing
Out of Stock
$22.25  Inc Tax
Team Losi Racing 75 tooth 48 Pitch Direct Drive Spur Gear (TLR332049)
This is a 72 tooth 48 Pitch Direct Drive Spur Gear from Team Losi Racing which are compatible with most of the TLR 22 series vehicles running TLR Direct Drive System (TLR332043). 

Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.


Perfect for 17.5 Stock Racing
Out of Stock
$22.25  Inc Tax
Team Losi Racing Layshaft & Spacer Set: 22/T/SCT (TLR2963)
This is a Layshaft & Spacer Set from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.

NOTE: Does not fit 22 5.0 Models


Fits most of the TLR 22 Buggies and Trucks
Out of Stock
$21.95  Inc Tax
Team Losi Racing 4.8x6mm Ball Stud Set (2) (Titanium) (TLR6030)
This is a packet of (2) Titanium 4.8x6mm Ball Studs from Team Losi Racing. 


Put your race car on a diet
Out of Stock
$21.95  Inc Tax
Team Losi Racing 4.8x10mm Ball Stud Set (2) (Titanium) (TLR6032)
This is a packet of (2) Titanium 4.8x10mm Ball Studs from Team Losi Racing. 


Put your race car on a diet
$21.95  Inc Tax
Team Losi Racing X-Ring Shock Seal Set: 22/T/SCT (TLR233005)
This is a X-Ring Shock Seal Set from Team Losi Racing compatible with all 22, 22T and 22SCT vehicles. 


Package includes:
  • 8x x-ring lower cartridge seal
  • 4x shock cap o-rings
  • 4x lower cap o-rings



Fits most of the 22 series of 1/10 vehicles
Out of Stock
$21.75  Inc Tax
Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (Yellow) (2): 22 3.0/4.0/5.0 (TLR43010)
This is a Packet of (2) Yellow Front Buggy Wheels from Team Losi Racing for their 22 and 22 3.0, 4.0 & 5.0 models.

NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.

Does NOT fit the earlier Losi 22 and 22 2.0 models
$20.95  Inc Tax
Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (White) (2): 22 3.0/4.0/5.0 (TLR43009)
This is a Packet of (2) WhiteFront Buggy Wheels from Team Losi Racing for their 22 and 22 3.0, 4.0 & 5.0 models.

NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.

Does NOT fit the earlier Losi 22 and 22 2.0 models
$20.25  Inc Tax
Team Losi Racing 1/10 Rear Buggy Wheels (Yellow) (12mm Hex) (2): 22/22-4 (TLR7101)
This is a Packet of (2) Yellow Rear Buggy Wheels from Team Losi Racing for their 22 1/10 buggies.

Fits on the rear of all TLR 1/10 22 Buggies
Out of Stock
$20.25  Inc Tax
Team Losi Racing 1/10 Rear Buggy Wheels (White) (12mm Hex) (2): 22/22-4 (TLR7100)
This is a Packet of (2) White Rear Buggy Wheels from Team Losi Racing for their 22 1/10 buggies.

Fits on the rear of all TLR 1/10 22 Buggies
$20.25  Inc Tax
Team Losi Racing Front Hinge & King Pin Set: 22 3.0 (TLR234052)
This is a Front Hinge & King Pin Set from Team Losi Racing for most of their 22 buggy race kits.

These are the replacement 22 3.0 front hinge pins and king pins, but are compatible with the entire 22 series of 1/10 2wd vehicles.

Package includes:
  • 2x hinge pins
  • 2x king pins
  • 2x lock nuts
Fits most TLR 22 Buggy kits
$20.00  Inc Tax
$26.95
J-Concepts "Stabilizer" Front Wing (2) (Narrow) (Clear): all 2wd 22 kits (JCO 0155)
This is a packet of (2) "Stabilizer" Clear Front Narrow Wings from J-Concepts for all the 2wd TLR 22 buggy race kits.

The JConcepts "Stabilizer" TLR 22 3.0 Narrow Front Wing is a high-performance, adjustable front wing. Mounted above the front shock tower on any of the TLR 22 series buggies, the front wing mounts in “clean air” and is easy to trim, use and test without sacrificing all important track time. Available in 2 widths, the driver can choose either the “narrow” for a lighter feel or “wide” (JCO0156) for heavier down force.

The Stabilizer front wing features a high-attack design with trim-able rear gurney options. The edgy design functions and compliments the Finnisher and Silencer body designs perfectly, while including elements and features that make the Stabilizer perfect for the latest off-road conditions. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit. The leading center section of the wing has been formed into a unique V-shape to perfectly outline the front shock tower geometry.

Fit & Finish
Direct fit for the TLR 22 shock tower configurations, the JConcepts wing mounts just behind the front shock tower and is clinched between tower and inner shock nut. The front wings feature aligned holes for each shock position, however, it is only necessary to cut holes for the location chosen at that time.

Features:
  • Original JConcepts design
  • High-attack, V-angle design
  • Radical, edgy design
  • Light-weight and durable design
  • Trim lines and dimpled location for TLR 22 series vehicles
Increases High Speed Steering
Out of Stock
$19.95  Inc Tax
Team Losi Racing 4mm Low Profile Serrated Nuts (TLR236001)
This is a packet of (4) 4mm Low Profile Serrated Nuts from Team Losi Racing.


These are used to secure the front wheels to the axles, and are used to secure the rear wheels when using the optional +1.5mm rear hexes (TLR332011).
Fits most of the 22 series of 1/10 vehicles
$19.95  Inc Tax
Hobbypro 1/10 Front Wing for 2WD buggy (2) (HBP HW022)
This is a packet of (2) 1/10 2wd buggy front wing from Hobbypro.<br />
<br />
Fits most 1/10 2wd buggies
$19.95  Inc Tax
J-Concepts "Stabilizer" Front Wing (2) (Wide) (Clear): all 2wd 22 kits (JCO 0156)
This is a packet of (2) "Stabilizer" Clear Front Wide Wings from J-Concepts for all the 2wd TLR 22 buggy race kits.

The JConcepts "Stabilizer" TLR 22 3.0 Wide Front Wing is a high-performance, adjustable front wing. Mounted above the front shock tower on any of the TLR 22 series buggies, the front wing mounts in “clean air” and is easy to trim, use and test without sacrificing all important track time. Available in 2 widths, the driver can choose either the “narrow” (JCO0155) for a lighter feel or “wide” for heavier down force.  

The Stabilizer front wing features a high-attack design with trim-able rear gurney options. The edgy design functions and compliments the Finnisher and Silencer body designs perfectly, while including elements and features that make the Stabilizer perfect for the latest off-road conditions. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit. The leading center section of the wing has been formed into a unique V-shape to perfectly outline the front shock tower geometry.

Fit & Finish
Direct fit for the TLR 22 shock tower configurations, the JConcepts wing mounts just behind the front shock tower and is clinched between tower and inner shock nut. The front wings feature aligned holes for each shock position, however, it is only necessary to cut holes for the location chosen at that time.

Features:
  • Original JConcepts design
  • High-attack, V-angle design
  • Radical, edgy design
  • Light-weight and durable design
  • Trim lines and dimpled location for TLR 22 series vehicles
Increases High Speed Steering
Out of Stock
$19.95  Inc Tax
Team Losi Racing 4mm Low Profile Aluminium Serrated Locknut Set (4) (Black) (TLR336003)
This is a packet of (4) 4mm Low Profile Aluminium Serrated Locknuts from Team Losi Racing for the front axles of their 2wd and 4wd 1/10 buggies. 

Features:

  • Machined serrations provide the ultimate bite against the 22 and 22-4 front wheels.
  • 7mm nut surfaces to not have any chamfers providing an extremely positive fit to a nut driver, making the nuts much harder to round or strip compared to others.
  • Attractive Black Anodizing

Fits most TLR 22 2wd & 4wd kits
Out of Stock
$19.95  Inc Tax
AVID Racing Concepts Associated/TLR Diff Thrust Bearing (Tungsten Carbide) (AVD AVF2.5-6M/TC)
This is a 2.5x6x3 Tungsten Carbide ball grooved thrust bearing from Avid Racing Concepts to be used in the popular Team Associated, TLR, and Serpent vehicles. 

Benefits:
  • Makes working on your diff so much easier.
  • No more worries of losing a ball.
  • When applying grease to it you won't get your fingers covered in grease from having to press the balls into place.


Tips:
  • Steel ball, least expensive and easy to adjust the diff. However you will have to replace them more often and the diff will never be as smooth as a Tungsten Carbide or Ceramic ball version.
  • Tungsten Carbide ball, this is what we recommend for most racers, the balls are more true than steel balls and slightly harder but still have a few imperfections which allows the ball to grab the the surface of the grooved rings easily. This makes it easy to set the diff tightness.
  • Ceramic ball, these balls are completely smooth and very hard. This makes for the best feeling diff out of all our options but it also makes for the most narrow window for setting your diff tightness correctly. Should only be used by the most experienced of racers.


Not compatible with 22 5.0
$19.95  Inc Tax
SWORKz 1/10 sonic lexan wing 6.5″ (2) (SW-250042)
This is a packet of (2) 6.5" Sonic Lexan Wings from SWORKz which are compatible with most 1/10 scale off-road buggies. 
 


 





Fits most 1/10 scale off-road buggies
$19.95  Inc Tax
Team Losi Racing 3mm Flanged Aluminum Locknuts (10) (Black) (TLR366005)
This is a packet of (10) M3 Flanged Locknuts from Team Losi Racing, and is intended for use with many of their vehicles.

Features:

  • Helps to reduce weight for all 22 vehicles
  • Flanged nuts are perfect for shock mounts to increase surface contact area
  • Anodized Black to not clash with other TLR components
  • Package includes ten 3mm flanged aluminum locknuts



Fits many models, check your manual first
Out of Stock
$19.95  Inc Tax
Team Losi Racing 72 tooth 48 Pitch Direct Drive Spur Gear (TLR332048)
This is a 72 tooth 48 Pitch Direct Drive Spur Gear from Team Losi Racing which are compatible with most of the TLR 22 series vehicles running TLR Direct Drive System (TLR332043). 

Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.


Perfect for 17.5 Stock Racing
$19.75  Inc Tax
Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (Stiffezel) (White) (2): 22 3.0/4.0/5.0 (TLR43017)
This is a Packet of (2) White Front Buggy Wheels from Team Losi Racing in Stiffezel Compound for their 22 and 22 3.0, 4.0 & 5.0 models.

Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load.

During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns.

The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."

NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
Does NOT fit the earlier Losi 22 and 22 2.0 models
$18.95  Inc Tax
Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (Stiffezel) (Yellow) (2): 22 3.0/4.0/5.0 (TLR43018)
This is a Packet of (2) Yellow Front Buggy Wheels from Team Losi Racing in Stiffezel Compound for their 22 and 22 3.0, 4.0 & 5.0 models.

Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load.

During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns.

The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."

NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
Does NOT fit the earlier Losi 22 and 22 2.0 models
$18.95  Inc Tax
Team Losi Racing Front Bulkhead: 22/T/SCT (TLR1052)
This is a Front Bulkhead from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.


Fits most of the TLR 22 Buggies and Trucks
Out of Stock
$18.75  Inc Tax
Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (Stiffezel) (Yellow) (Narrow)(2): 22 3.0/4.0/5.0) (TLR43020)
This is a Packet of (2) Yellow Narrow Front Buggy Wheels from Team Losi Racing in Stiffezel Compound for their 22 3.0, 4.0 & 5.0 models.

The narrow profile provides more consistent front grip, and more steering in high load turns

NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.


Narrow profile provides more consistent front grip, & more steering in high load turns
$17.95  Inc Tax
Team Losi Racing Front Bumper: 22 (TLR1054)
This is a Front Bumper from Team Losi Racing for most of their 22 buggy race kits.

Fits most TLR 22 Buggy kits
$17.50  Inc Tax
Team Losi Racing Front Pivot with Brace & Kick Shims: All 2wd 22 Kits (TLR234109)
This is a Front Pivot Set from Team Losi Racing, including the Brace and Kick Shim used on all of their 2wd TLR 22 buggy and truck race kits.

Fits all 2wd TLR 22 Kits
Out of Stock
$16.95  Inc Tax
Team Losi Racing Low Frequency Front Shock Springs (2) (Gold) (12mm) (TLR233054)
This is a packet of (2) 12mm Gold Front Shock Springs from Team Losi Racing.

Great tuning option
$16.50  Inc Tax
Team Losi Racing Differential Screw, Nut & Spring Set: 22 5.0 (TLR232086)
This is a Differential Screw, Nut & Spring Set from Team Losi Racing designed for their 22 5.0 which may also fit their other 1/10 kits running a ball differentials. 


May fit other TLR kits
$15.50  Inc Tax
AVID Racing Carbon Super Low Roll Center Shims: All 2wd 22 Kits (0.5 & 1.0mm) (AVD AV1098)
This is a packet of (2) Carbon Fibre Super Low Roll Center Shims from AVID RC; used to adjust the kick angle on all of the 2wd TLR 22 buggy and truck race kits.

The TLR SLRC (Super Low Roll Center) Shims are made out of 100% carbon and offered in this set with two thicknesses of 0.5mm and 1.0mm.

Lowering the front hinge pins allows the front end to roll more. This is extremely helpful for absorbing the extra energy caused by high bite tracks like carpet/astro turf/prepped clay.

It can sometimes be counter-intuitive thinking why this helps, but a good way to picture the benefits, imagine your car has turnbuckles as front shock. When giving your car any steering input the car will immediately respond causing the rear to become unstable.

This increase in roll helps slow all that reaction down.

Package includes:
  • 1x 0.5mm carbon shim
  • 1x 1.0mm carbon shim



Adjust Front Kick Angle on 2WD 22 Kits
$14.95  Inc Tax
Team Losi Racing Rear Suspension Insert Set: 22 3.0 & 4.0 & 5.0 (TLR234055)
This is a Rear Suspension Insert Set from Team Losi Racing used to adjust the rear toe in and anti-squat on their TLR 22 3.0, 4.0 and 5.0 buggy and truck race kits.


Package includes:
  • 7 pairs of long anti-squat inserts
  • 4 pairs of short rear toe inserts


Note: These do not fit the TLR 22 5.0 Elite kit - instead use TLR334063

Allows you to tune the Rear Suspension
$14.50  Inc Tax
Team Losi Racing 4.8x6mm Ball Stud Set (4) (TLR6025)
This is a packet of (4) 4.8x6mm Ball Studs from Team Losi Racing, used in most of their 1/10 kits. 


Used in most TLR 1/10 kits
$13.75  Inc Tax
Team Losi Racing 4.8x10mm Ball Studs (TLR6023)
This is a packet of (4) 4.8x10mm Ball Studs from Team Losi Racing.


Fits most of the 22 series of 1/10 vehicles
Out of Stock
$13.75  Inc Tax
Team Losi Racing Machined Shock Bushing Set: 22/T/SCT (TLR233006)
This is a Machined Shock Bushing Set from Team Losi Racing compatible with all 22, 22T and 22SCT vehicles. 

These lower cartridge bushings are machined for a more precise fit, and for the best results should be used with the x-ring o-rings included with the TLR233005 seal set.

Fits most of the 22 series of 1/10 vehicles
$13.00  Inc Tax
$25.75
Team Losi Racing Rear Hub Carrier (2): 22 & 22-4 2.0 (TLR234065)
This is a packet of (2) optional Rear Hub Carrier with plastic hexes from Team Losi Racing for their 22 series of 2WD 1/10 scale vehicles, as well as the 22-4 2.0 4WD buggy.


Optional Rear Hub Carrier
$12.95  Inc Tax
Team Losi Racing 1/10 Front Shock Spring Set (Blue -3.8 Rate) (2): 22 (TLR5176)
This is a pair of Blue - (3.8 Rate) Front Shock Springs from Team Losi Racing for the 22 racing buggies.


Fine tune your TLR 22 Buggy
$12.50  Inc Tax
Team Losi Racing 1/10 Front Shock Spring Set (Green -3.5 Rate) (2): 22 (TLR5175)
This is a pair of Green - (3.5 Rate) Front Shock Springs from Team Losi Racing for the 22 racing buggies.


Fine tune your TLR 22 Buggy
$12.50  Inc Tax
Yeah Racing 4mm Aluminium Wheel Flange Lock Nuts, (Silver) (4) (YR YA-0448SV)
This is a packet of (4) Silver 4mm Aluminium Wheel Flange Lock Nuts from Yeah Racing.

These high precision and realistic wheel nuts are flanged and knurled for locking security and feature a light-weight design.


Features:
  • For: 1/10 RC
  • Material: Aluminium
  • Color: Silver


Specifications:
  • Use 7.0 Lock Nut Driver


Package includes:
  • 4x 4mm Aluminium Wheel Flange Lock Nuts

Serrated surface for additional holding power
Out of Stock
$12.00  Inc Tax
Team Losi Racing 66 tooth 48 Pitch Direct Drive Spur Gear (TLR332046)
This is a 66 tooth 48 Pitch Direct Drive Spur Gear from Team Losi Racing which are compatible with most of the TLR 22 series vehicles running TLR Direct Drive System (TLR332043). 

Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.


Perfect for 17.5 Stock Racing
$11.75  Inc Tax
Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) (TLR233008)
This is a packet of (4) (1.5x2) 12mm CNC Machined Shock Piston from Team Losi Racing.

These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
Fits most of the 22 series of 1/10 vehicles
$10.00  Inc Tax
$22.95
Team Losi Racing 3.5x44mm TiCN Front Shock Shafts (2): 22 & 22-4 2.0 (TLR233000)
This is a packet of (2) 3.5x44mm TiCN Front Shock Shaft from Team Losi Racing for the 22 and 22-4 2.0 racing buggies.

These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Common TLR Front Shock Shaft
Out of Stock
$10.00  Inc Tax
$14.50
Team Losi Racing 3.5x50mm TiCN Shock Shafts (2): 22, 22T & 22SCT (TLR233002)
This is a packet of (2) 3.5x50mm TiCN Rear Shock Shaft from Team Losi Racing for the 22 racing buggies. These are also used as front shock shafts on the TLR 22T and 22SCT Racing Trucks

These can also be used as an optional upgrade for the first generation 22 Buggies. The improved titanium carbonitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Used on Rear of 2wd Buggies & Front of Trucks
Out of Stock
$10.00  Inc Tax
$14.50
Team Losi Racing 12mm Shock End & Spring Cup Set: 22/T/SCT/22-4 (TLR5095)
This is a 12mm Shock End & Spring Cup Set from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.

Package includes:
  • 4x Shock ends
  • 4x spring cups
  • 4x mounting balls


Fits most of the TLR 22 Buggies and Trucks
$10.00  Inc Tax
$17.75
Team Losi Racing 1/10 Front Shock Spring Set (Black -4.1 Rate) (2): 22 (TLR5177)
This is a pair of Black - (4.1 Rate) Front Shock Springs from Team Losi Racing for the 22 racing buggies.


Fine tune your TLR 22 Buggy
$9.95  Inc Tax
Team Losi Racing Tungesten Carbide Ball Differential Thrust Balls & Washer Set: 22 5.0 (TLR232087)
This is a Tungesten Carbide Ball Differential Thrust Balls & Washer Set from Team Losi Racing desinged for their 22 5.0 which may also fit their other 1/10 kits running a ball differentials. 


May fit other TLR kits
$9.95  Inc Tax
Team Losi Racing Gen II Differential Nut Set (TLR2946)
This is a Gen II Differential Nut Set from Team Losi Racing which is compatible with all their 1/10 kits running a ball differentials. 


Fits all TLR ball differentials
$8.95  Inc Tax
Team Losi Racing Solid Drive Pin Set (8) (TLR232002)
This is a packet of (8) Solid Drive Pins from Team Losi Racing.


Fits All of the 22 series of 1/10 vehicles
$8.50  Inc Tax
Xceed Aluminium Shim (3x6x1mm) (Blue) (10) (XCE 103345)
This is a packet of (10) Blue 3x6x1mm Aluminium Shims from Xceed to add bling and function. 




Add bling to your ride
Out of Stock
$7.50  Inc Tax
Team Losi Racing Front Shock Tower: 22 (TLR1055)
This is a Front Shock Tower from Team Losi Racing for most of their 22 buggy race kits.
Fits most TLR 22 Buggy kits
$7.00  Inc Tax
$9.95
Team Losi Racing 5x8x2.5mm Bearings (2) (TLR237000)
This is a packet of (2) replacement 5x8x2.5mm Bearings from Team Losi Racing and are intended for use with their 22 line of 1/10 scale vehicles, as well as the XXX line of 1/10 scale vehicles.

These bearings are used in the ball differential.
Common bearing used in TLR ball differential.
$5.00  Inc Tax
$22.50
Team Losi Racing 4mm Turnbuckle Rod End (12) : 22 3.0, 22-4 2.0 & 22 SCT (TLR6017)
This is a packet of (12) 4.0mm Rod Ends from Team Losi Racing designed for the 3rd Gen TLR 22 range.
Designed for 3rd Gen TLR 22 range
$5.00  Inc Tax
$7.50
Per Page      1 - 80 of 80
  • 1