22 5.0 DC Elite Buggy Parts
Great for those running indoor and outdoor racing with the same car. Simply swap your shocks depending on the event.
Packet includes:
- This differential kit includes all the necessary parts to build a full diff; in the event you're looking for a spare to have on hand in a moments notice, or ensuring you have every single spare part needed to service the diff.
Package includes:
- 1 x trimmed lightweight buggy body ready for the required polycarbonate paint
- 1 x clear rear wing
Great for indoor racing.
TLR Ringer Black Shock Kit includes everything needed to convert your complete vehicle over to our black aluminum parts. The kit includes 4 threaded shock collars that feature offset laser-etched Avid logos for ease of matching spring tension left and right in 1/4 turn increments as well as 4 shock bottom caps that are knurled with a silver ringer highlight machining.
Key features:
- Collars have offset laser etching of the Avid logo for ease of matching spring tension left and right in 1/4 turn increments
- Ringer silver highlights for that bling appeal on both collars and shock bottoms caps
- Standard internal oring design for holding the collar in position
- Each package includes 4 collars with internal orings and 4 shock bottom caps with orings.
- Fits: TLR G3 shocks and Avid 13mm G3 shocks.
This pivot is +6g heavier than the kit composite front pivot, but still 3g lighter than the previous aluminum pivot. This small increase of weight on the front axles increases the vehicles power steering and durability.
- Anodized Black with silver chamfered edges.
- Pivot is the standard height (LRC) and works with the kit kick shims.
- CNC Machined from durable 7075-T6 Aluminium
- Works with the included aluminium front hinge pin brace (black version) to help improve wear/durability of the front hinge pin holes
• This new brass front pivot fits all of the 22 2wd buggies and trucks.
• At +30g heavier than the kit composite front pivot, additional weight over the front axles increases on power steering, but does not pin the car over the front end as the +50g pivot can at times.
• Pivot is the standard height (LRC) and works with the kit kick shims.
• Works with the included aluminum front hinge pin brace (black version) to help improve wear/durability of the front hinge pin holes.
This optional battery weight set includes 19, 26 and 37 gram weights that are designed to install under the battery, and will add weight down low to help lower the center of gravity.
The P2 body by JConcepts for the TLR 22 5.0 Elite vehicle is the meanest, nastiest thing out for 1/10th buggy racing. Throw everything you know out the window, the Punisher 2 separates itself from the rest of the bodies on the market with its distinctive styling. The S2 and F2 body designs have created their own path of success on dirt, carpet, and Astroturf with class leading success, now, the P2, will carve its own.
The P2 is once again, all about performance with riveting details including raised nose / hood, taller cab and rear-end force features. The side-pods are once again JC chamfered to provide that legendary look and the secondary window screams JConcepts styling. The cab drops off quickly and runs deep toward the rear giving plenty of drift to the newly added winglets. The tall, rear fin stabilizer acts as a directional vain to keep the buggy tracking in the proper direction while also maintaining a rigid roofline even with light-weight materials.
The package arrives complete with, two, Aero S-type wings used by Ryan Maifield to claim the 2017 IFMAR World Championship. The extended rear gurney lip allows for tuning more grip on the loose surfaces while running with the latest generation in off-road.
Race and Event History:
The Punisher 2 body had a winning performance during the 2019 IFMAR World Championships with Spencer Rivkin taking the TQ and victory in Trenčín, Slovakia.
During the 2018 Reedy International Off-Road Race of Champions, Brad Shearer made it an event to remember by taking the 2wd Open title with a freshly painted and prepped P2 body.
Features:
- Original - JConcepts Punisher 2 styling
- Raised nose / hood with taller P2 cab
- Drop-in cab with rear-end winglets
- Tall, rear fin stabilizer for tracking performance
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed decal sheet
- Two, Aero S-type rear wings
- 2019 IFMAR World Champion
Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. The F2 body is a drop fit for the popular TLR 22 5.0 buggy.
With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which help steering rotation in low traction corners.
The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The rear of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear.
In addition to the newly designed body, JConcepts has included two of the latest Aero S-type rear wings used by Ryan Maifield to win the IFMAR World Championships.
Features:
- Original - JConcepts F2 design
- Blended wing / body design
- Includes two Aero, S-Type rear wings
- Clear polycarbonate with protective film
- Window masks and decal sheet
- IFMAR World Championship winning design
The 6.5” wide TLR Medium Downforce Rear Wing provides fantastic grip and stability in all conditions.
Features:
- Made from 1.2mm thick lexan for longer life and has raised end plates for extra tire clearance
- Three scribe lines across the rear offer repeatable wickerbill trimming options
Titanium Lower Shock Mounts for 10th scale vehicles make it easy for getting your shocks off and on while not wearing out the plastic from repeated uses. The one design feature we added to this common product is the 6 small holes in each mount. They are not there to lose weight but rather to help keep the mount from backing out as easily when taking the nut off the end, acting as a bit of a serration.
Key features:
- Machined from billet 6Al-4V Titanium
- 6 small holes in each mount to act as a bit of a serration so it will stay in more securely
- Has a 1.5mm Allen head for installation
- No threads where your shock eyelet rests
- Fits common 10th scale vehicles
- Each package includes (2) lower shock mount screws and (2) aluminium M3 flanged locknuts
This optional brass ballast weight set will allow you to tune the forward weight bias of your chassis to suit various track conditions and is recommended for carpet track applications.
Package includes:
- 8.8 G heavier than the stock composite part
- Lazer etched for easy identification of kick angle and TLR branding
Package includes:
- 1x 25 degree brass kick shim
These inserts are made from aluminium and are much stronger, and more rigid over the standard plastic parts.
This EVO version now includes their new CPD Slipper Pads (Consistent Power Delivery), which is recommended for the majority of conditions.
The Triad Evo is greater than ever with new self-centering Evo plates that are designed to allow the clutch to transmit power, yet maintain a degree of slip without overheating.
Highlights:
- Smoother throttle/brake feel in jumps as well as turns
- Consistent performance (jumps are the same every lap)
- Light weight, compact design (TRIAD 11.2g Vs. Stock 16.4g)
- (NEW) 3 self-centering plates, vented for weight and cooling.
- Longer life with less maintenance
These inserts are made from aluminium and are much stronger, and more rigid over the standard plastic parts.
The Avid TLR 22 5.0 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) 13mm standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed.
Key features:
- Avid TLR 22 5.0 Ringer Shock Standoffs are a direct upgrade for the TLR336010 parts
- 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
- Fully threaded part which helps to prevent mount screws from bending so easily.
- Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.
Package includes:
- 4x 13mm standoffs
- 4x Delrin™ pivot bushings
- 4x SS M3x22 cap screws
Fits: TLR 22 5.0
The Avid TLR 22x4 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed.
Key features:
- Avid TLR 22x4 Ringer Shock Standoffs are a direct upgrade for the kit parts
- 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
- Fully threaded part which helps to prevent mount screws from bending so easily.
- Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.
Package includes:
- 4x standoffs
- 4x Delrin™ pivot bushings
- 4x SS M3x22 cap screws
Fits: TLR 22x4
This is a packet of two Slipper Pads, Max Drive, SHDS for Smooth Power Delivery from Team Losi, for their 22 5.0 buggy and new 1/4 Promoto-MX Motorcycle.
The 6.5” wide TLR Medium Downforce Rear Wing provides fantastic grip and stability in all conditions.
The Avid M4 Ringer Wheel Nuts are designed to be the strongest all-around wheel nut for offroad and touring car racing. The 11mm flange provides the needed support from potential wheel flex on high bite tracks.
A thin 3.5mm thickness keeps weight down but also allows the nut to be used on 4wd fronts and if you cut your axles to length you will grab fewer pipes with them too. They included *aggressive serrations so you don't have to tighten the wheel nut as much which helps in not deforming the wheel and ensures you will never pull the 7075-T6 threads out.
And last but not least, the two silver highlights don't get lost on a white wheel giving you that extra pop.
Tips
* Since 2017, the Avid RC proven serration design is best used by turning the nut to where it begins to tighten up on the wheel and then just give it two haptic clicks. Avid RC recommend trying it on the bench and unscrewing it after you do it so feel how much hold their nut actually has. No more need to deform your wheel or risk of pulling your threads out by overtightening.
Specifications:
- Made from 7075-T6.
- 11mm flange to support wheel flex on high bite tracks.
- Thin design at 3.5mm thick so they can also be used on 4wd fronts.
- Aggressive serrations to ensure you never pull your threads or deform your wheel.
- Fits all modern 10th scale vehicles in offroad and onroad (AE, TLR, HB, KYO, XRAY, YOK) (M4x0.7)
- Available colors: Black, Blue, Red, Pink, Orange, and Silver.
- Each package includes 4 Ringer wheel nuts.
These optional standoffs are machined out of titanium for lighter weight and superior strength compared to the stock parts.
Avid Triad Titanium Wing Screws are a minimal design approach for securing your wing in 10th scale off/on-road applications. The low profile head is only 1.5mm thick instead of our standard Triad Wing Buttons which are 2.25mm. The OD of the button is also reduced to only 12mm from the standard 16mm which allows the Triad Ti Wing Screw to come in at 0.34g/ea which includes the screw where the standard Triad Wing Button comes in at 0.39g/ea not including the screw.
Features:
- Machined from billet 6Al-4V Titanium
- Designed for 10th scale off/on-road applications with a 6mm long screw
- Low profile 1.5mm screw head
- Screw head is only 12mm instead of the standard 16mm
- Broached with a 2mm allen head on outer side for easy installation and removal
- Weighs 0.34g/ea
Package Includes:
- 2x wing screws
- 1x Avid mini-decal
Package includes:
- Twenty eight individual pivot inserts
Package includes:
- 7 pairs of long anti-squat inserts
- 4 pairs of short rear toe inserts
Package Include:
- 340 M3 Screws of various sizes from 6mm to 12mm
- M3 & M4 Washers
- 1 x Handy plastic storage case
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Package includes:
- Twenty eight individual pivot inserts
TLR has taken their proven composite idler and ball diff gears from the 22 platform and machined them narrower to maximum performance in spec racing classes. This reduce both rotating mass, and gear drag in the transmission so that more power makes it from the motor to tires.
Package includes:
- 1x wing mounts for upright transmission
- 1x wing mounts for laydown transmission
- 1x wing shim
- mounting hardware
- 1x bumper
Specifications:
- Extremely light weight serrated wheel, coming in at 0.3g/ea.
- Unique Triad 3 cornered nut, uses common 7mm wheel wrenches.
- Serrated to ensure they stay on while you’re showing the pipe who’s the boss. *Updated 12/1/15
- Fits all modern 10th scale vehicles in offroad and onroad (AE, TLR, HB, KYO, XRAY, YOK) (M4x0.7)
- Available colors: Black, Red, Blue, Pink, Green, Purple, Orange and Hard Anodized.
- Each package includes 4 Triad wheel nuts and 1 AVID mini decal sheet.
These lightweight aluminium locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs.
Features:
- Made from lightweight aluminium
- Serrated surface for additional holding power
These lightweight aluminium locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs.
Features:
- Made from lightweight aluminium
- Serrated surface for additional holding power
Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.
Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
The JConcepts "Stabilizer" TLR 22 3.0 Narrow Front Wing is a high-performance, adjustable front wing. Mounted above the front shock tower on any of the TLR 22 series buggies, the front wing mounts in “clean air” and is easy to trim, use and test without sacrificing all important track time. Available in 2 widths, the driver can choose either the “narrow” for a lighter feel or “wide” (JCO0156) for heavier down force.
The Stabilizer front wing features a high-attack design with trim-able rear gurney options. The edgy design functions and compliments the Finnisher and Silencer body designs perfectly, while including elements and features that make the Stabilizer perfect for the latest off-road conditions. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit. The leading center section of the wing has been formed into a unique V-shape to perfectly outline the front shock tower geometry.
Fit & Finish
Direct fit for the TLR 22 shock tower configurations, the JConcepts wing mounts just behind the front shock tower and is clinched between tower and inner shock nut. The front wings feature aligned holes for each shock position, however, it is only necessary to cut holes for the location chosen at that time.
Features:
- Original JConcepts design
- High-attack, V-angle design
- Radical, edgy design
- Light-weight and durable design
- Trim lines and dimpled location for TLR 22 series vehicles
These are used to secure the front wheels to the axles, and are used to secure the rear wheels when using the optional +1.5mm rear hexes (TLR332011).
Variable Height Axle (VHA) rear hubs give more roll center and axle height adjustments than previous models.
<br />
The JConcepts "Stabilizer" TLR 22 3.0 Wide Front Wing is a high-performance, adjustable front wing. Mounted above the front shock tower on any of the TLR 22 series buggies, the front wing mounts in “clean air” and is easy to trim, use and test without sacrificing all important track time. Available in 2 widths, the driver can choose either the “narrow” (JCO0155) for a lighter feel or “wide” for heavier down force.
The Stabilizer front wing features a high-attack design with trim-able rear gurney options. The edgy design functions and compliments the Finnisher and Silencer body designs perfectly, while including elements and features that make the Stabilizer perfect for the latest off-road conditions. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit. The leading center section of the wing has been formed into a unique V-shape to perfectly outline the front shock tower geometry.
Fit & Finish
Direct fit for the TLR 22 shock tower configurations, the JConcepts wing mounts just behind the front shock tower and is clinched between tower and inner shock nut. The front wings feature aligned holes for each shock position, however, it is only necessary to cut holes for the location chosen at that time.
Features:
- Original JConcepts design
- High-attack, V-angle design
- Radical, edgy design
- Light-weight and durable design
- Trim lines and dimpled location for TLR 22 series vehicles
Features:
- Machined serrations provide the ultimate bite against the 22 and 22-4 front wheels.
- 7mm nut surfaces to not have any chamfers providing an extremely positive fit to a nut driver, making the nuts much harder to round or strip compared to others.
- Attractive Black Anodizing
Benefits:
- Makes working on your diff so much easier.
- No more worries of losing a ball.
- When applying grease to it you won't get your fingers covered in grease from having to press the balls into place.
Tips:
- Steel ball, least expensive and easy to adjust the diff. However you will have to replace them more often and the diff will never be as smooth as a Tungsten Carbide or Ceramic ball version.
- Tungsten Carbide ball, this is what we recommend for most racers, the balls are more true than steel balls and slightly harder but still have a few imperfections which allows the ball to grab the the surface of the grooved rings easily. This makes it easy to set the diff tightness.
- Ceramic ball, these balls are completely smooth and very hard. This makes for the best feeling diff out of all our options but it also makes for the most narrow window for setting your diff tightness correctly. Should only be used by the most experienced of racers.
Features:
- Helps to reduce weight for all 22 vehicles
- Flanged nuts are perfect for shock mounts to increase surface contact area
- Anodized Black to not clash with other TLR components
- Package includes ten 3mm flanged aluminum locknuts
Available in 66, 69, 72 and 75 tooth configurations, these spurs will allow you to get your 17.5 car dialed in for a variety of track conditions.
NOTE: these do not fit the other 22 5.0 versions unless you convert to VHA set-up.
Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load.
During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns.
The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load.
During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns.
The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
The narrow profile provides more consistent front grip, and more steering in high load turns
NOTE: These have a 12mm Hex drive so do not fit 22 1.0 or 2.0 as they have a 10mm Hex.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Package includes:
- 4x 3 Composite Shock Caps
- 4x bleeder screws
(Replaces TLR333007)
Package includes:
- 2x idler gears
- 1x one idler shaft
The TLR SLRC (Super Low Roll Center) Shims are made out of 100% carbon and offered in this set with two thicknesses of 0.5mm and 1.0mm.
Lowering the front hinge pins allows the front end to roll more. This is extremely helpful for absorbing the extra energy caused by high bite tracks like carpet/astro turf/prepped clay.
It can sometimes be counter-intuitive thinking why this helps, but a good way to picture the benefits, imagine your car has turnbuckles as front shock. When giving your car any steering input the car will immediately respond causing the rear to become unstable.
This increase in roll helps slow all that reaction down.
Package includes:
- 1x 0.5mm carbon shim
- 1x 1.0mm carbon shim
Package includes 2mm, 3mm, and 4mm inserts
Packet Includes:
- 4 x Shock Cups
- 4 x Medium Cups
- 4 x Long Cups