2wd 22S Parts

This is a packet of (2) Assembled Aluminium Front Shock Set from Team Losi intended to fit their 22S Drag cars and 22S Short Course Trucks.

This is the Hi Performance PRE-CUT Body from Team Losi Racing for 2wd and 4wd Short Course Trucks.

This body will improve the performance of the Losi XXX-SCT, Ten-SCTE, Team Losi Racing 22SCT or any other short course chassis by allowing air to pass through release holes in the body during flight, reducing the "parachute effect" and improving down-force and stability for excellent cornering.

The air release holes have been pre-cut to eliminate the need to perform the tedious and time consuming task by hand.


Key Features:

This is a Complete Gear Diff from Team Losi intended to fit their 22S Drag cars and 22S Short Course Trucks.

This is a packet of (2) Titanium Lower Shock Mounts from Avid Racing Concepts for the 1/10 TLR racing buggies but may fit other buggies.

Titanium Lower Shock Mounts for 10th scale vehicles make it easy for getting your shocks off and on while not wearing out the plastic from repeated uses. The one design feature we added to this common product is the 6 small holes in each mount. They are not there to lose weight but rather to help keep the mount from backing out as easily when taking the nut off the end, acting as a bit of a serration. 

Key features:

• Machined from billet 6Al-4V Titanium
• 6 small holes in each mount to act as a bit of a serration so it will stay in more securely
• Has a 1.5mm Allen head for installation
• No threads where your shock eyelet rests
• Fits common 10th scale vehicles
• Each package includes (2) lower shock mount screws and (2) aluminium M3 flanged locknuts

This is a packet of (4) front and rear suspension arms from Team Losi intended to fit their 22S Short Course Trucks.

This is a packet of (4) Ringer Shock Standoffs from Avid Racing Concepts for the 1/10 TLR 22 5.0 racing buggies but may fit other buggies.

The Avid TLR 22 5.0 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) 13mm standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed. 

Key features:

• Avid TLR 22 5.0 Ringer Shock Standoffs are a direct upgrade for the TLR336010 parts
• 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
• Fully threaded part which helps to prevent mount screws from bending so easily.
• Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.

Package includes:

• 4x 13mm standoffs
• 4x Delrin™ pivot bushings
• 4x SS M3x22 cap screws

Fits: TLR 22 5.0

This is a packet of (4) Ringer Shock Standoffs from Avid Racing Concepts for the 1/10 TLR 22x4 racing buggies but may fit other buggies.

The Avid TLR 22x4 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed. 

Key features:

• Avid TLR 22x4 Ringer Shock Standoffs are a direct upgrade for the kit parts
• 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
• Fully threaded part which helps to prevent mount screws from bending so easily.
• Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.

Package includes:

• 4x standoffs
• 4x Delrin™ pivot bushings
• 4x SS M3x22 cap screws

Fits: TLR 22x4

This is a packet of (2) Aluminium Clamping Rear Wheel Hexes from Team Losi intended to fit their 22S Drag cars and 22S Short Course Trucks.

This is a 340 piece Metric M3 Screw and Washers Set


Package Include:

• 340 M3 Screws of various sizes from 6mm to 12mm
• M3 & M4 Washers
• 1 x Handy plastic storage case

Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.

Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.

This is an Aluminium Clamping Servo Horn from Team Losi intended to fit their 22S Drag cars and 22S Short Course Trucks.

This is a packet of (10) M3 Flanged Locknuts from Team Losi Racing, and is intended for use with many of their vehicles.

Features:

• Helps to reduce weight for all 22 vehicles
• Flanged nuts are perfect for shock mounts to increase surface contact area
• Anodized Black to not clash with other TLR components
• Package includes ten 3mm flanged aluminum locknuts

This is a packet of (10) Hinge Pins from Team Losi intended to fit their 22S Short Course Trucks and Drag Cars.

This is a packet of (4) Delrin™ pivot bushings from Avid Racing Concepts for the AVID RC AE / TLR Shock Standoffs.

These Delrin™ pivot bushings come in a pack of 4 as replacements for our AE / TLR Shock Standoffs. These bushings rest on the smooth surface of the standoff instead of on the threads of the screw which allows them to last longer. However, over time the bushing can still wear and it is beneficial to replace them for a tight fit into your shock cap.

Key features:

• Delrin™ bushings are replaceable for low friction and minimal slop
• Each package includes 4 Delrin™ bushings, and 1 AVID mini decal sheet