4wd SCTE 1.0 SCT Parts

1. 6x 12x18x4 Revolution Bearings
2. 4x 10x15x4 Revolution Bearings
3. 4x 6x12x4 Revolution Bearings
4. 4x 5x11x4 Revolution Bearings
5. 4x 5x8x2.5 Revolution Bearings

Titanium Lower Shock Mounts for 10th scale vehicles make it easy for getting your shocks off and on while not wearing out the plastic from repeated uses. The one design feature we added to this common product is the 6 small holes in each mount. They are not there to lose weight but rather to help keep the mount from backing out as easily when taking the nut off the end, acting as a bit of a serration. 

Key features:

• Machined from billet 6Al-4V Titanium
• 6 small holes in each mount to act as a bit of a serration so it will stay in more securely
• Has a 1.5mm Allen head for installation
• No threads where your shock eyelet rests
• Fits common 10th scale vehicles
• Each package includes (2) lower shock mount screws and (2) aluminium M3 flanged locknuts

This is a packet of (2) Bleeder Shock Caps from Team Losi Racing for use with the TLR 22 family of vehicles up to version 4.0.

These aluminium shock caps will allow you to rebuild your 22 shocks much easier.

The Avid TLR 22 5.0 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) 13mm standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed. 

Key features:

• Avid TLR 22 5.0 Ringer Shock Standoffs are a direct upgrade for the TLR336010 parts
• 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
• Fully threaded part which helps to prevent mount screws from bending so easily.
• Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.

• 4x 13mm standoffs
• 4x Delrin™ pivot bushings
• 4x SS M3x22 cap screws

The Avid TLR 22x4 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed. 

Key features:

• Avid TLR 22x4 Ringer Shock Standoffs are a direct upgrade for the kit parts
• 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
• Fully threaded part which helps to prevent mount screws from bending so easily.
• Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.

• 4x standoffs
• 4x Delrin™ pivot bushings
• 4x SS M3x22 cap screws

• 340 M3 Screws of various sizes from 6mm to 12mm
• M3 & M4 Washers
• 1 x Handy plastic storage case

Features:

• Helps to reduce weight for all 22 vehicles
• Flanged nuts are perfect for shock mounts to increase surface contact area
• Anodized Black to not clash with other TLR components
• Package includes ten 3mm flanged aluminum locknuts

• The Sabertooth wheel has strength where it counts, and because of the hollow 5-spoke design, the wheels are the light at only 23.2 grams each, compared to 29.5 grams from the stock wheel
• The Sabertooth wheel has a large inner and outer glue catch to keep the glue where you want it and not on your wheel face
• The innovative Avid swirl pattern is designed to mate with serrated locking nuts to keep your wheels secure
  Real-truck inspired 5-spoke design
• Avid wheels are center-point injected to ensure that they spin true and are well balanced
• Pre-molded with vent hole
• Avid logo on the wheel face

• 2 x Yellow Sabertooth wheels
• 1 x Avid mini decal sheet

• The Sabertooth wheel has strength where it counts, and because of the hollow 5-spoke design, the wheels are the light at only 23.2 grams each, compared to 29.5 grams from the stock wheel
• The Sabertooth wheel has a large inner and outer glue catch to keep the glue where you want it and not on your wheel face
• The innovative Avid swirl pattern is designed to mate with serrated locking nuts to keep your wheels secure
  Real-truck inspired 5-spoke design
• Avid wheels are center-point injected to ensure that they spin true and are well balanced
• Pre-molded with vent hole
• Avid logo on the wheel face

• 2 x Black Sabertooth wheels
• 1 x Avid mini decal sheet

These Delrin™ pivot bushings come in a pack of 4 as replacements for our AE / TLR Shock Standoffs. These bushings rest on the smooth surface of the standoff instead of on the threads of the screw which allows them to last longer. However, over time the bushing can still wear and it is beneficial to replace them for a tight fit into your shock cap.

Key features:

• Delrin™ bushings are replaceable for low friction and minimal slop
• Each package includes 4 Delrin™ bushings, and 1 AVID mini decal sheet