4wd SCTE 2.0 SCT Parts
Hi Performance PRE-CUT SCT Body: 22SCT, SCT, SCTE (TLR8061)
This is the Hi Performance PRE-CUT Body from Team Losi Racing for 2wd and 4wd Short Course Trucks.
This body will improve the performance of the Losi XXX-SCT, Ten-SCTE, Team Losi Racing 22SCT or any other short course chassis by allowing air to pass through release holes in the body during flight, reducing the "parachute effect" and improving down-force and stability for excellent cornering.
The air release holes have been pre-cut to eliminate the need to perform the tedious and time consuming task by hand.
Key Features:
This body will improve the performance of the Losi XXX-SCT, Ten-SCTE, Team Losi Racing 22SCT or any other short course chassis by allowing air to pass through release holes in the body during flight, reducing the "parachute effect" and improving down-force and stability for excellent cornering.
The air release holes have been pre-cut to eliminate the need to perform the tedious and time consuming task by hand.
Key Features:
- Specially designed air outlets reduce the "parachute effect" by directing the flow of air outward, providing improved jumping and air handling characteristics
- Air is directed to release from the designed air outlets providing improved jumping and air handling characteristics
- High downforce design for improved corner speed, stability, and improved drivability
- Pre-cut eliminating the need for the tedious and time consuming process to be done by hand
- .040" Lexan for improved reliability and durability
- Precut Window Masks
- Covered by a thin film that prevents over-spray from effecting the outside of the body
- TLR, grill, and tail light sticker sheet included
- Clear body, requires painting
Holes precut to reduce the "parachute effect"
Team Losi Racing Front/Rear CV Driveshafts and Couplers (2) (Ten-SCTE) (LOSB3564)
This is a packet of (2) Front or Rear CV Driveshafts from Team Losi Racing for thier Ten-SCTE truck.
Replace worn and damaged parts
Out of Stock
$57.50 Inc Tax
Team Losi Racing Aluminium Hex Differential Wrench (TLR2950)
This is an Aluminium Hex Differential Wrench from Team Losi Racing which is compatible with all their 1/10 kits running a ball differentials.
Fits all TLR ball differentials
Out of Stock
$54.95 Inc Tax
AVID Racing Concepts Bearing Set: TLR TEN-SCTE (AVD AVLOSI-SCTE)
This is a Full Bearing Set from AVID Racing Concepts for the TLR Ten-SCTE 4wd racing trucks.
Packet Includes:
NOTE: Could also be used on Nitro TEN-SCT Truck but does not include Clutch Bearings.
Packet Includes:
- 6x 12x18x4 Revolution Bearings
- 4x 10x15x4 Revolution Bearings
- 4x 6x12x4 Revolution Bearings
- 4x 5x11x4 Revolution Bearings
- 4x 5x8x2.5 Revolution Bearings
NOTE: Could also be used on Nitro TEN-SCT Truck but does not include Clutch Bearings.
Full Bearing Set
AVID RC Lower Shock Mounts | 10th | Titanium (AVD AV10078)
This is a packet of (2) Titanium Lower Shock Mounts from Avid Racing Concepts for the 1/10 TLR racing buggies but may fit other buggies.
Titanium Lower Shock Mounts for 10th scale vehicles make it easy for getting your shocks off and on while not wearing out the plastic from repeated uses. The one design feature we added to this common product is the 6 small holes in each mount. They are not there to lose weight but rather to help keep the mount from backing out as easily when taking the nut off the end, acting as a bit of a serration.
Key features:
- Machined from billet 6Al-4V Titanium
- 6 small holes in each mount to act as a bit of a serration so it will stay in more securely
- Has a 1.5mm Allen head for installation
- No threads where your shock eyelet rests
- Fits common 10th scale vehicles
- Each package includes (2) lower shock mount screws and (2) aluminium M3 flanged locknuts
For most 1/10 TLR racing buggy
Team Losi Racing Bleeder Shock Cap Set (2): TLR 22/22T (TLR5065)
This is a packet of (2) Bleeder Shock Caps from Team Losi Racing for use with the TLR 22 family of vehicles up to version 4.0.
These aluminium shock caps will allow you to rebuild your 22 shocks much easier.
Bleeder Shock Cap Set
AVID RC Ringer Shock Standoffs | 22 5.0 | Set (AVD AV10109-2250)
This is a packet of (4) Ringer Shock Standoffs from Avid Racing Concepts for the 1/10 TLR 22 5.0 racing buggies but may fit other buggies.
Package includes:
Fits: TLR 22 5.0
The Avid TLR 22 5.0 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) 13mm standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed.
Key features:
- Avid TLR 22 5.0 Ringer Shock Standoffs are a direct upgrade for the TLR336010 parts
- 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
- Fully threaded part which helps to prevent mount screws from bending so easily.
- Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.
Package includes:
- 4x 13mm standoffs
- 4x Delrin™ pivot bushings
- 4x SS M3x22 cap screws
Fits: TLR 22 5.0
Adds strength and bling
AVID RC Ringer Shock Standoffs | 22x4 | Set (AVD AV10109-22X4)
This is a packet of (4) Ringer Shock Standoffs from Avid Racing Concepts for the 1/10 TLR 22x4 racing buggies but may fit other buggies.
Package includes:
Fits: TLR 22x4
The Avid TLR 22x4 Ringer Shock Standoffs are a direct replacement for the kit standoffs, including (4) standoffs, and (4) Delrin™ pivot bushings. They are made of black anodized 7075 Aluminium with a 7mm nut and our Ringer design silver highlights at the base to blind your competition with.
Each standoff is fully threaded to help prevent bent shock mount screws. The Delrin™ pivot bushings are designed to rest against the smooth standoff instead of the screw which extends the life of them however they can be replaced to help maintain a tight fit in your shock cap when needed.
Key features:
- Avid TLR 22x4 Ringer Shock Standoffs are a direct upgrade for the kit parts
- 7075 Aluminum, black anodized with shiny silver highlights on 7mm nut.
- Fully threaded part which helps to prevent mount screws from bending so easily.
- Delrin™ bushings slip over the standoff instead of resting on threads which helps lengthen their longevity.
Package includes:
- 4x standoffs
- 4x Delrin™ pivot bushings
- 4x SS M3x22 cap screws
Fits: TLR 22x4
Adds strength and bling
Team Losi Racing Rear Bumper Set: Ten-SCTE (LOSB2417)
This is a Rear Bumper Set from Team Losi Racing for their Ten-SCTE trucks.
Replace worn and damaged parts
Out of Stock
$29.95 Inc Tax
Team Losi Racing SCT Wheel (2) (Black): 22SCT & TEN-SCTE (TLR7011)
This is a pair of Black rims from Team Losi Racing for the front and back of their 2wd 22SCT range & 4wd TEN-SCTE race trucks.
br />
br />
Fits TLR 2wd and 4wd SCT trucks
Out of Stock
$27.75 Inc Tax
Metric M3 Screw and Washers Set (340 pieces) (SCREWBOX-SML)
This is a 340 piece Metric M3 Screw and Washers Set
Package Include:
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Package Include:
- 340 M3 Screws of various sizes from 6mm to 12mm
- M3 & M4 Washers
- 1 x Handy plastic storage case
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Includes a handy plastic storage case
Out of Stock
$27.50 Inc Tax
Team Losi Racing Front Steering Spindles & Carriers: Ten-SCTE (LOSB2100)
This is a packet of Front Steering Spindles & Carriers from Team Losi Racing for their Ten-SCTE trucks.
Replace worn and damaged parts
Out of Stock
$26.50 Inc Tax
Team Losi Body Mount Set: Ten-SCTE (LOSB2414)
This is a Body Mount Set from Team Losi Racing for their Ten-SCTE trucks.
Replace worn and damaged parts
Out of Stock
$24.95 Inc Tax
Team Losi Racing Shock Cap Bottom Set (2): 1/10 TLR (TLR5086)
This is a packet of (2) Shock Cap Bottoms from Team Losi Racing for their full 22 2wd and 4wd Race Kits
Fits All 1/10 TLR 22 shocks
Team Losi Racing 4.8x8mm Ball Stud Set (2) (Titanium) (TLR6031)
This is a packet of (2) Titanium 4.8x8mm Ball Studs from Team Losi Racing.
Put your race car on a diet
Out of Stock
$22.95 Inc Tax
Team Losi Racing 4.8x6mm Ball Stud Set (2) (Titanium) (TLR6030)
This is a packet of (2) Titanium 4.8x6mm Ball Studs from Team Losi Racing.
Put your race car on a diet
Out of Stock
$21.95 Inc Tax
Team Losi Racing 4.8x10mm Ball Stud Set (2) (Titanium) (TLR6032)
This is a packet of (2) Titanium 4.8x10mm Ball Studs from Team Losi Racing.
Put your race car on a diet
Team Losi Racing X-Ring Shock Seal Set: 22/T/SCT (TLR233005)
This is a X-Ring Shock Seal Set from Team Losi Racing compatible with all 22, 22T and 22SCT vehicles.
Package includes:
Package includes:
- 8x x-ring lower cartridge seal
- 4x shock cap o-rings
- 4x lower cap o-rings
Fits most of the 22 series of 1/10 vehicles
Out of Stock
$21.75 Inc Tax
Team Losi Racing Turnbuckle Set: Ten-SCTE (LOSB4003)
This is a Turnbuckle Set from Team Losi Racing for their Ten-SCTE truck.
This set includes all six turnbuckles needed for the steering links and front and rear camber links.
This set includes all six turnbuckles needed for the steering links and front and rear camber links.
Replace worn and damaged parts
Out of Stock
$19.95 Inc Tax
Team Losi Racing 3mm Flanged Aluminum Locknuts (10) (Black) (TLR366005)
This is a packet of (10) M3 Flanged Locknuts from Team Losi Racing, and is intended for use with many of their vehicles.
Features:
- Helps to reduce weight for all 22 vehicles
- Flanged nuts are perfect for shock mounts to increase surface contact area
- Anodized Black to not clash with other TLR components
- Package includes ten 3mm flanged aluminum locknuts
Fits many models, check your manual first
Out of Stock
$19.95 Inc Tax
Avid Racing Concepts 12mm Hex "Sabertooth" Short Course Wheels (Yellow) (2): 22SCT/TEN-SCTE (AVD AV1101-Y)
This is a pair of 12mm Hex "Sabertooth" Wheels from Avid RC to fit the front and rear of the Losi TEN-SCTE, 22SCT and any XXX-SCT with the hex adapter conversion.
The Sabertooth Short Course Wheel is designed with several features to set it apart from the crowd. The durability, style and weight of these wheels will have racers and bashers alike appreciating the design details that make Avid products unique.
Features:
Packet Includes:
The Sabertooth Short Course Wheel is designed with several features to set it apart from the crowd. The durability, style and weight of these wheels will have racers and bashers alike appreciating the design details that make Avid products unique.
Features:
- The Sabertooth wheel has strength where it counts, and because of the hollow 5-spoke design, the wheels are the light at only 23.2 grams each, compared to 29.5 grams from the stock wheel
- The Sabertooth wheel has a large inner and outer glue catch to keep the glue where you want it and not on your wheel face
- The innovative Avid swirl pattern is designed to mate with serrated locking nuts to keep your wheels secure
Real-truck inspired 5-spoke design - Avid wheels are center-point injected to ensure that they spin true and are well balanced
- Pre-molded with vent hole
- Avid logo on the wheel face
Packet Includes:
- 2 x Yellow Sabertooth wheels
- 1 x Avid mini decal sheet
Strong and light
Avid Racing Concepts 12mm Hex "Sabertooth" Short Course Wheels (Black) (2): 22SCT/TEN-SCTE (AVD AV1101-B)
This is a pair of 12mm Hex "Sabertooth" Wheels from Avid RC to fit the front and rear of the Losi TEN-SCTE, 22SCT and any XXX-SCT with the hex adapter conversion.
The Sabertooth Short Course Wheel is designed with several features to set it apart from the crowd. The durability, style and weight of these wheels will have racers and bashers alike appreciating the design details that make Avid products unique.
Features:
Packet Includes:
The Sabertooth Short Course Wheel is designed with several features to set it apart from the crowd. The durability, style and weight of these wheels will have racers and bashers alike appreciating the design details that make Avid products unique.
Features:
- The Sabertooth wheel has strength where it counts, and because of the hollow 5-spoke design, the wheels are the light at only 23.2 grams each, compared to 29.5 grams from the stock wheel
- The Sabertooth wheel has a large inner and outer glue catch to keep the glue where you want it and not on your wheel face
- The innovative Avid swirl pattern is designed to mate with serrated locking nuts to keep your wheels secure
Real-truck inspired 5-spoke design - Avid wheels are center-point injected to ensure that they spin true and are well balanced
- Pre-molded with vent hole
- Avid logo on the wheel face
Packet Includes:
- 2 x Black Sabertooth wheels
- 1 x Avid mini decal sheet
Strong and light
Team Losi Racing TiCn Front Shock Shaft Set (2): Ten-SCTE (TLR234040)
This is a TiCn Front Shock Shaft Set from Team Losi Racing for their Ten-SCTE trucks.
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower friction coefficient than Ti-Nitride coatings.
Incredibly hard and tough surface that lasts longer
Team Losi Racing Differential Screw, Nut & Spring Set: 22 5.0 (TLR232086)
This is a Differential Screw, Nut & Spring Set from Team Losi Racing designed for their 22 5.0 which may also fit their other 1/10 kits running a ball differentials.
May fit other TLR kits
Team Losi Racing Front Suspension Arms (2): Ten-SCTE (LOSB2021)
This is a packet of Front Suspension Arms from Team Losi Racing for their Ten-SCTE trucks.
Replace worn and damaged parts
Out of Stock
$14.95 Inc Tax
Team Losi Racing 4.8x6mm Ball Stud Set (4) (TLR6025)
This is a packet of (4) 4.8x6mm Ball Studs from Team Losi Racing, used in most of their 1/10 kits.
Used in most TLR 1/10 kits
Team Losi Racing Machined Shock Bushing Set: 22/T/SCT (TLR233006)
This is a Machined Shock Bushing Set from Team Losi Racing compatible with all 22, 22T and 22SCT vehicles.
These lower cartridge bushings are machined for a more precise fit, and for the best results should be used with the x-ring o-rings included with the TLR233005 seal set.
These lower cartridge bushings are machined for a more precise fit, and for the best results should be used with the x-ring o-rings included with the TLR233005 seal set.
Fits most of the 22 series of 1/10 vehicles
Team Losi Racing Front and Rear CV Couplers (4): SCTE (LOSB3565)
This is a packet of (4) Front and Rear CV Couplers from Team Losi Racing for their 4wd SCTE range of racing trucks.
Fits all SCTE models
AVID RC Shock Standoff Bushings | 4pcs: AE / TLR (AVD AV1070-B)
This is a packet of (4) Delrin™ pivot bushings from Avid Racing Concepts for the AVID RC AE / TLR Shock Standoffs.
These Delrin™ pivot bushings come in a pack of 4 as replacements for our AE / TLR Shock Standoffs. These bushings rest on the smooth surface of the standoff instead of on the threads of the screw which allows them to last longer. However, over time the bushing can still wear and it is beneficial to replace them for a tight fit into your shock cap.
Key features:
- Delrin™ bushings are replaceable for low friction and minimal slop
- Each package includes 4 Delrin™ bushings, and 1 AVID mini decal sheet
Maintenance time?
Out of Stock
$11.95 Inc Tax
Team Losi Racing 12mm Shock End & Spring Cup Set: 22/T/SCT/22-4 (TLR5095)
This is a 12mm Shock End & Spring Cup Set from Team Losi Racing which fits most of the TLR 22 Buggies and Trucks.
Package includes:
Package includes:
- 4x Shock ends
- 4x spring cups
- 4x mounting balls
Fits most of the TLR 22 Buggies and Trucks
Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) (TLR233008)
This is a packet of (4) (1.5x2) 12mm CNC Machined Shock Piston from Team Losi Racing.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
These shock pistons are CNC machined for a precision fit inside the shock body and fit most of rhe 22 series of 1/10 vehicles.
Fits most of the 22 series of 1/10 vehicles
Team Losi Racing Mod1, 40 tooth Spur Gear: Ten-SCTE (LOSB3436)
This is a Mod1, 40 tooth Spur Gear from Team Losi Racing for their Ten-SCTE trucks.
Replace worn and damaged parts
Out of Stock
$9.95 Inc Tax
Team Losi Racing Tungesten Carbide Ball Differential Thrust Balls & Washer Set: 22 5.0 (TLR232087)
This is a Tungesten Carbide Ball Differential Thrust Balls & Washer Set from Team Losi Racing desinged for their 22 5.0 which may also fit their other 1/10 kits running a ball differentials.
May fit other TLR kits
Team Losi Racing Gen II Differential Nut Set (TLR2946)
This is a Gen II Differential Nut Set from Team Losi Racing which is compatible with all their 1/10 kits running a ball differentials.
Fits all TLR ball differentials
Team Losi Racing Solid Drive Pin Set (8) (TLR232002)
This is a packet of (8) Solid Drive Pins from Team Losi Racing.
Fits All of the 22 series of 1/10 vehicles
Xceed Aluminium Shim (3x6x1mm) (Blue) (10) (XCE 103345)
This is a packet of (10) Blue 3x6x1mm Aluminium Shims from Xceed to add bling and function.
Add bling to your ride
Out of Stock
$7.50 Inc Tax
Team Losi Racing Bleeder Shock Cap O-Ring (8): Ten-SCTE (TLR334000)
This is a packet of (8) Bleeder Shock Cap O-Rings from Team Losi Racing for the Ten-SCTE Racing Trucks
May fit other models
- 1