Losi 8ight-X-E Electric Buggy Parts
Half the weight of the standard Avid 10th wing buttons
Out of Stock
$17.95 Inc Tax
Team Losi Racing Aluminium Front Spindle Carriers (17.5°): 8IGHT-X / XT (TLR344040)
This is a pair of 17.5° Aluminium Front Spindle Carriers from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Increases tuning options and Strength
Out of Stock
$134.95 Inc Tax
Team Losi Racing Aluminium Front Spindle Carriers (20°): 8IGHT-X / XT (TLR344041)
This is a pair of 20° Aluminium Front Spindle Carriers from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Increases tuning options and Strength
Team Losi Racing Universal Driveshafts (2): 8IGHT-X (TLR342015)
This is a packet of (2) Universal Driveshafts from Team Losi Racing for their 8IGHT-X racing buggies.
These com standard in the front of the Elite version but can be used as an optional upgrade on the standard 8ight-X Kits.
These com standard in the front of the Elite version but can be used as an optional upgrade on the standard 8ight-X Kits.
Good option for rough tracks
Out of Stock
$99.95 Inc Tax
Team Losi Racing Universal Driveshaft (2): 8X, 8XE 2.0 (TLR242047)
This is a packet of (2) Universal Driveshafts from Team Losi Racing for their 8X, 8XE 2.0 racing buggies.
Replace worn and bent hardware
Team Losi Racing Adjustable Aluminium Front Hinge Pin Brace Set: 8IGHT-X / XT (TLR244049)
This is an adjustable Aluminium Front Hinge Pin Brace Set from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Includes (16) tuning Inserts
Out of Stock
$78.50 Inc Tax
Team Losi Racing Brass Ballast Chassis Weight Set (20g & 40g): 8IGHT-X / XT (TLR341010)
This is a Brass Ballast Weight Set, including one 20g and one 40g weight from Team Losi Racing for their 8IGHT-X racing buggies and 8IGHT-XTE racing truggies.
These weights should be secured with the included screws; We recommend also use a small amount of blue loctite to avoid them vibrating loose.
Packet includes:
These weights should be secured with the included screws; We recommend also use a small amount of blue loctite to avoid them vibrating loose.
Packet includes:
- 1 x 20g Brass Weight
- 1 x 40g Brass Weight
- 2 x mounting screws
Use to tune chassis weight distribution
Team Losi Racing 16mm Shock Nuts & O-rings (4): 8IGHT 3.0 / 4.0 / X / T / PM-MX (TLR243045)
This is a packet of (4) 16mm Shock Nuts & O-rings from Team Losi Racing compatible with all their 16mm Shocks.
Fits all TLR 16mm Shocks
Out of Stock
$67.25 Inc Tax
Team Losi Racing Aluminium Front Brace: 8IGHT-X / XT (TLR341012)
This is an optional Aluminium Front Brace from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Increases strength & reduces flex
Out of Stock
$59.95 Inc Tax
Team Losi Racing Screw & Nut Assortment Box: 8IGHT-X / XT (TLR345000)
This is a Screw & Nut Assortment Box from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Great to keep in your toolbox
Out of Stock
$59.95 Inc Tax
Team Losi Racing Aluminium Covered 17mm Wheel Nuts (Hard Anodized) (4): 8IGHT (All) (TLR3538)
This is a packet of (4) Hard Anodized Aluminium Covered 17mm Wheel Nuts from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
Fits all TLR 1/8 Racing buggies and truggies
Team Losi Racing 16mm Tapered Shock Piston Set (1.4/1.5mm): 8IGHT 3.0 / 4.0 / X / T (TLR243030)
This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Packet Includes:
Packet Includes:
- 2 x 1.4 x 5 tapered hole pistons
- 2 x 1.5 x 5 tapered hole pistons
Fits all TLR 16mm Shocks
Team Losi Racing Aluminium Steering Servo Saver Arm: 8IGHT-X / XT (TLR341011)
This is an Aluminium Servo Saver Arm from Team Losi Racing for their 8IGHT-X racing buggies and Truggies to will provide additional strength and holding power over the stock plastic servo saver parts.
Stronger for more controlled steering
Team Losi Racing EVO 2 Front Spring Set (6): 8IGHT-X, XE 2.0 (TLR243055)
This is an EVO 2 Front Spring Set from Team Losi Racing for their 8IGHT-X 2.0 racing buggies.
Packet includes:
Spring Rates:
Packet includes:
- 2x gold front springs
- 2x silver front springs
- 2x white front springs
Spring Rates:
- White: 3.86
- Gold: 4.13
- Silver: 4.46
Includes 3 pairs of springs for fine tuning
Team Losi Racing 3.5mm Shock Shaft Conversion: 8IGHT-X (TLR344035)
This is the optional 3.5mm Shock Shaft Conversion from Team Losi Racing including the necessary parts to use 3.5mm thick shock shafts on all four shocks for their 8IGHT-X racing buggies.
Updates all four shocks
Team Losi Racing 25T Aluminium Steering Servo Horn: 8IGHT-X (TLR341009)
This is a 25T Aluminium Steering Servo Horn from Team Losi Racing for their 8IGHT-X racing buggies
Good looking and functional
Out of Stock
$44.95 Inc Tax
Team Losi Racing Front/Rear CV Driveshaft Bones (2): 8IGHT-X (TLR242031)
This is a packet of (2) Front/Rear CV Driveshaft Bones from Team Losi Racing for their 8IGHT-X racing buggies.
These can be used in the front or rear.
These can be used in the front or rear.
Can be used in the front or rear.
Out of Stock
$41.50 Inc Tax
Team Losi Racing 16mm Aluminium Bleeder Shock Caps (2): 8IGHT-X / XT (TLR243040)
This is a packet of (2) 16mm Aluminium Bleeder Shock Caps from Team Losi Racing for their 8IGHT-X and 8IGHT XT racing buggies and truggies.
Packet includes:
Packet includes:
- 2 x aluminium bleeder shock caps
- 2 x bleeder screws
- 2 x washers
includes two bleeder screws and washers
Team Losi Racing Front Lightened Outdrive Set (2) (+1): 8ight-X/8XE 2.0 (TLR242053)
This is a Front Lightened Outdrive Set from Team Losi Racing for their 8X, 8XE 2.0 racing buggies.
Constructed from high strength steel these outdrives have been optimized for weight savings without sacrificing durability. These also feature a +1mm length for increase engagement.
Packet includes:
Constructed from high strength steel these outdrives have been optimized for weight savings without sacrificing durability. These also feature a +1mm length for increase engagement.
Packet includes:
- 1x Left front outdrive,
- 1x Right front outdrive.
Includes both left and right outdrives
Out of Stock
$39.95 Inc Tax
Team Losi Racing Carbon Rear Arm Inserts (2): 8IGHT-X (TLR344038)
This is a packet of (2) Carbon Rear Arm Inserts from Team Losi Racing for use with the TLR 8IGHT-X, 8IGHT-XE and 8IGHT-X Elite 1/8 buggy kits.
Packet includes:
Packet includes:
- 2x Carbon Rear Arm Inserts
- Required mounting hardware
Look great, Increases strength & reduces flex
Team Losi Racing Front Arm Set (2): 8IGHT-X (TLR244039)
This is a packet of (2) Front Arms from Team Losi Racing for their 8IGHT-X racing buggies.
Standard 8ight-X front arms
Out of Stock
$33.95 Inc Tax
Team Losi Racing Rear Arm Set (2): 8IGHT-X (TLR244038)
This is a packet of (2) Rear Arms, Inserts and Mud Guards from Team Losi Racing for their 8IGHT-X racing buggies.
Includes inserts and mud guards
Out of Stock
$33.95 Inc Tax
Team Losi Racing 16mm Shock Boot Set (8): 8IGHT 3.0 / 4.0 / X (TLR243031)
This is a packet of (8) 16mm Shock Boots from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Out of Stock
$33.75 Inc Tax
Team Losi Racing 1/8 Buggy Wing (Yellow): 8ight-X (TLR240012)
This is a 1/8 Yellow Buggy Wing from Team Losi Racing.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Yellow wing
- 2x wickerbills
- Required hardware
Include 2x Wickerbill (IFMAR Legal)
Out of Stock
$33.50 Inc Tax
Team Losi Racing 1/8 Buggy Wing (White): 8ight-X (TLR240011)
This is a 1/8 White Buggy Wing from Team Losi Racing.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x White wing
- 2x wickerbills
- Required hardware
Include 2x Wickerbill (IFMAR Legal)
Out of Stock
$33.50 Inc Tax
Team Losi Racing 1/8 Buggy Wing (Black): 8ight-X (TLR240010)
This is a 1/8 Black Buggy Wing from Team Losi Racing.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Black wing
- 2x wickerbills
- Required hardware
Include 2x Wickerbill (IFMAR Legal)
Out of Stock
$33.50 Inc Tax
Team Losi Racing Differential Gear & Shaft Set: 8X, 8XE 2.0 (TLR242046)
This is a Differential Gear & Shaft Set from Team Losi Racing for their 8X, 8XE 2.0 racing buggies.
Replacement set of diff gears
Out of Stock
$31.95 Inc Tax
Team Losi Racing 4x66mm Hinge Pins (2): 8IGHT-X / XT (TLR244043)
This is a packet of (2) 4x66mm Hinge Pins from Team Losi Racing for their 8IGHT-X racing buggies and 8IGHT-XT racing truggies.
Front and rear inner hinge pins
Team Losi Racing 16mm 5-Hole Machined Piston Set (1.4 & 1.5mm): 8IGHT 3.0 / 4.0 / X / T (TLR243023)
This is a packet of (4) 16mm 5-hole Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Packet Includes:
The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.
Packet Includes:
- 2 x five 1.4mm hole pistons
- 2 x five 1.5mm hole pistons
The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm Tapered Shock Piston Set (1.3mm/1.2-1.3 Split): 8IGHT 3.0 / 4.0 / X / T (TLR243029)
This is a packet of (4) 16mm Tapered Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Packet Includes:
Packet Includes:
- 2 x 1.3 x 8 hole piston
- 2 x "split" pistons that have four 1.3 holes and four 1.2 holes
Fits all TLR 16mm Shocks
Avid Racing Concepts Triad Titanium Wing Screws (2) (AVD AV1067P)
This is a packet of (2) Triad Titanium Wing Screws from Avid RC, that weigh just 0.3g each, and are the lightest metal button on the market.
Avid Triad Titanium Wing Screws are a minimal design approach for securing your wing in 10th scale off/on-road applications. The low profile head is only 1.5mm thick instead of our standard Triad Wing Buttons which are 2.25mm. The OD of the button is also reduced to only 12mm from the standard 16mm which allows the Triad Ti Wing Screw to come in at 0.34g/ea which includes the screw where the standard Triad Wing Button comes in at 0.39g/ea not including the screw.
Features:
Package Includes:
Avid Triad Titanium Wing Screws are a minimal design approach for securing your wing in 10th scale off/on-road applications. The low profile head is only 1.5mm thick instead of our standard Triad Wing Buttons which are 2.25mm. The OD of the button is also reduced to only 12mm from the standard 16mm which allows the Triad Ti Wing Screw to come in at 0.34g/ea which includes the screw where the standard Triad Wing Button comes in at 0.39g/ea not including the screw.
Features:
- Machined from billet 6Al-4V Titanium
- Designed for 10th scale off/on-road applications with a 6mm long screw
- Low profile 1.5mm screw head
- Screw head is only 12mm instead of the standard 16mm
- Broached with a 2mm allen head on outer side for easy installation and removal
- Weighs 0.34g/ea
Package Includes:
- 2x wing screws
- 1x Avid mini-decal
the lightest metal button on the market.
Team Losi Racing Shock Stand Off (4): 8IGHT-X / XT (TLR244056)
This is a packet of (4) Shock Stand Offs from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
For the complete TLR 8IGHT X family
Out of Stock
$29.75 Inc Tax
Team Losi Racing Rear Center Dogbone (95mm): 8IGHT-XE (TLR242034)
This is a 95mm Rear Center Dogbone from Team Losi Racing for their 8IGHT-XE racing buggy.
Fits standard length chassis
Out of Stock
$28.75 Inc Tax
Team Losi Racing Droop Screw (4) (TLR245000)
This is a packet of (4) Droop Screws from Team Losi Racing suitable for most of their 1/8 buggies and truggies.
These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.
These screws are used to limit the amount of down travel (droop), on the front and rear suspension arms.
Fits most of TLR 1/8 kits
Out of Stock
$27.95 Inc Tax
Team Losi Racing Axle Boot Set (TLR242018)
This is an Axle Boot Set from Team Losi Racing suitable for most of their 1/8 buggies and truggies since 4.0.
These are used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.
Packet includes:
These are used to retain the grease you add to the driveshaft joints, as well as prevent dirt contamination.
Packet includes:
- 4 x axle boots
- 4 x boot retainer rings
- 2x center driveshaft coupler boots
Maintenance time?
Out of Stock
$27.95 Inc Tax
Team Losi Racing Front Spindle Carriers (17.5°): 8IGHT-X / XT (TLR244042)
This is a pair of replacement 17.5° Front Spindle Carriers from Team Losi Racing for their 8IGHT-X racing buggies and 8IGHT-XT racing truggies.
These are the standard front spindles.
Team Losi Racing Wing Mount Set: 8IGHT-X (TLR241032)
This is a replacement Wing Mount Set from Team Losi Racing for their 8IGHT-X racing buggies.
Keep your wing mount straight and true
Out of Stock
$27.75 Inc Tax
Metric M3 Screw and Washers Set (340 pieces) (SCREWBOX-SML)
This is a 340 piece Metric M3 Screw and Washers Set
Package Include:
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Package Include:
- 340 M3 Screws of various sizes from 6mm to 12mm
- M3 & M4 Washers
- 1 x Handy plastic storage case
Material:
High quality metal material,strengths & durable,ideal for fastening for your rc car.
Compatible with:
Most RC Model Cars,such as Traxxas Slash/Trx-4, Axial SCX10, Arrma, Losi, HPI, Redcat Racing, Exceed RC, HSP, etc.
Includes a handy plastic storage case
Out of Stock
$27.50 Inc Tax
Team Losi Racing Front/Rear Differential Pinion Gear :8IGHT 2.0 / 3.0 / 4.0 / X / XE Buggy (LOSA3508)
This is a Differential Pinion Gear from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies.
NOTE: This does not fit the TLR 8IGHT Truggy.
NOTE: This does not fit the TLR 8IGHT Truggy.
Fits all TLR 8IGHT Buggies
Out of Stock
$26.95 Inc Tax
Team Losi Racing Front Center Dogbone (95.5mm): 8ight 4.0 / XE (TLR242016)
This is a 95.5mm Front Center Dogbone from Team Losi Racing compatible with their 8ight 4.0 and XE Buggies.
95.5mm dog bone
Team Losi Racing V2 Heavy Duty Differential Case: 8IGHT-XT / XTE (TLR242045)
This is a V2 Heavy Duty Differential Case from Team Losi Racing for their 1/8 8IGHT-X / XE
Buggy and 8IGHT-XT/XTE Truggy Nitro and Electric 4WD Off-Road racing Kits.
May fit earlier version TLR kits
Team Losi Racing Rear Axle (2): 8ight 3.0 / 4.0 / XE (TLR342001)
This is a packet 0f (2) Rear Axles from Team Losi Racing compatible with their 8ight 3.0, 4.0 and XE Buggies.
Has less binding than CV driveshaft to allow the suspension to work better on rough tracks
Has less binding than CV driveshaft to allow the suspension to work better on rough tracks
Optional Dogbone set-up
Team Losi Racing Differential Gear & Shaft Set: 8IGHT (All) (LOSA3502)
This is a Differential Gear & Shaft Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
This packet contains all the gears and pins to rebuild one differential.
This packet contains all the gears and pins to rebuild one differential.
Fits all TLR 1/8 Racing buggies and truggies
Team Losi Racing Carbon Front Arm Inserts (2): 8IGHT-X (TLR344037)
This is a packet of (2) Carbon Front Arm Inserts from Team Losi Racing for use with the TLR 8IGHT-X, 8IGHT-XE and 8IGHT-X Elite 1/8 buggy kits.
Packet includes:
Packet includes:
- 2x Carbon Front Arm Inserts
- Required mounting hardware
Look great, Increases strength & reduces flex
Team Losi Racing 3.5mm Rear Shock Shaft (1): 8IGHT-X (TLR344031)
This is a 3.5mm Rear Shock Shaft from Team Losi Racing for their 8IGHT-X racing buggies when using the optional 3.5mm Shock Shaft Conversion Kit (TLR344035).
Packet Includes:
Packet Includes:
- 1 x rear shock shaft
- 1 x piston screw
For when using the 3.5mm conversion kit
Out of Stock
$23.75 Inc Tax
Team Losi Racing Rear Hubs (2): 8IGHT-X / XT (TLR244088)
This is a packet of (2) Rear Hubs from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Standard 8ight-X Rear Hubs
Out of Stock
$23.75 Inc Tax
Team Losi Racing Shock Plastics Set: 8IGHT-X / 8IGHT XT (TLR243038)
This is a Shock Plastics Set from Team Losi Racing for their 8IGHT-X racing buggies and truggies.
Packet includes:
Packet includes:
- 4 x lower spring retainers
- 4 x 3.5mm shock ends
- 4 x 4mm shock ends
- 4 x lower mounting balls
- 4 x shock end screws
Standard 8ight-X Shock Plastics Set
Team Losi Racing 3.5mm Front Shock Shaft (1): 8IGHT-X (TLR344030)
This is a 3.5mm Front Shock Shaft from Team Losi Racing for their 8IGHT-X racing buggies when using the optional 3.5mm Shock Shaft Conversion Kit (TLR344035).
Packet Includes:
Packet Includes:
- 1 x front shock shaft
- 1 x piston screw
For when using the 3.5mm conversion kit
Out of Stock
$22.50 Inc Tax
Team Losi Racing 1/8 Buggy Wing (Black): 8IGHT 3.0 (TLR240001)
This is a 1/8 Black Buggy Wing from Team Losi Racing.
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions.
Package includes:
- 1x Black wing
- 2x wickerbills
- Required hardware
Include 2x Wickerbill's
Out of Stock
$22.50 Inc Tax
Team Losi Racing Light Weight Aluminium Differential Shaft Set (6): 8IGHT (All) (TLR3501)
This is a packet of (6) Light Weight Aluminium Differential Shafts from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.
This package includes six aluminium cross pins, enough for all three differentials, and will help to reduce rotating mass.
Fits all TLR 1/8 Racing buggies and truggies
Team Losi Racing Front Gearbox Set: 8IGHT-X / 8IGHT XT (TLR242025)
This is a pair of replacement Front Gearbox Set from Team Losi Racing for their 8IGHT-X racing buggies and truggies.
Replacement front gearbox plastics
Team Losi Racing Battery Straps (3) (LOSA4463)
This is a packet of (3) Battery Straps from Team Losi Racing.
Can fit most Electric 1/8 Buggies
Team Losi Racing Sway Bar Set: 8IGHT-X / XT (TLR344039)
This is a Sway Bar Set from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Packet includes:
Packet includes:
- 1 x 2.2mm front swaybar
- 1 x 2.4mm front swaybar
- 1 x 2.6mm rear swaybar
- 1 x 2.8mm rear swaybar
8ight-X tuning options
Out of Stock
$20.95 Inc Tax
Aluminium Covered (1/8) 17mm Wheel Nuts (Black) (4) (KRNL007A)
This is a packet of (4) 1/8 17mm Black Covered Wheel Nuts which will fit most 1/8 scale buggies and truggies.
Fits most 1/8 Racing buggies and truggies
Team Losi Racing Rear Gearbox Set: 8IGHT-X (TLR242024)
This is a pair of replacement Rear Gearbox Set from Team Losi Racing for their 8IGHT-X family of racing buggies.
Note: For the 8IGHT XT Truggy please use TLR242043
Note: For the 8IGHT XT Truggy please use TLR242043
Replacement rear gearbox plastics
Team Losi Racing 16mm EVO Rear Shock Spring Set (Orange - 4.0 Rate) (2): 8IGHT 4.0 / 8IGHT-X (TLR344024)
This is a packet of (2) 16mm EVO Rear Shock Springs from Team Losi Racing for their 8IGHT 4.0 & 8IGHT-X racing buggies.
TLR EVO shock springs are closer together in rate for finer tuning. They are also constant in coil diameter and longer length when compared to the standard TLR springs. Between the constant coil diameter and the frequency TLR has chosen for these, these handle much better in all conditions, especially when it comes to bumps and landing. These are the orange, 4.0 rate rear springs.
NOTE: There are a couple of changes needed to run these springs on your TLR 8IGHT vehicles. You will need to use the spring cups that come with the shock ends in LOSA5435 that were for the older 1.0 and 2.0 vehicles. You will also need to flip your shock collars over so the lip is on the top.
16mm 1/8 Big bore springs
Out of Stock
$19.95 Inc Tax
Team Losi Racing 4.5x55mm Turnbuckle and Rod Ends (2): 8IGHT-X (TLR244053)
This is a packet of (2) 4.5x55mm Turnbuckle and Rod Ends from Team Losi Racing for their 8IGHT-X racing buggies.
Note: These turnbuckles are directional and notched for easy thread identification.
Note: These turnbuckles are directional and notched for easy thread identification.
Standard 8ight-X front camber link
Out of Stock
$18.95 Inc Tax
Team Losi Racing Center Diff Mount and Battery Mount Set: 8IGHT-XE (TLR241060)
This is a Center Diff Mount and Battery Mount from Team Losi Racing for their 8IGHT-XE racing buggies .
Not required for Nitro version
Team Losi Racing Rear Shock Shaft (3.5x66.3mm): 8IGHT-X, XE 2.0 (1) (TLR243053)
This is a replacement 3.5 x 66.3mm Rear Shock Shaft from Team Losi Racing for their 8IGHT-X and 8IGHT-X 2.0 racing buggies.
3.5 x 66.3mm shock shaft
Out of Stock
$18.75 Inc Tax
Team Losi Racing 6.8mm Suspension Balls (4): 8IGHT-X / XT (TLR244052)
This is a packet of (4) 6.8mm Suspension Balls from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Standard 8ight-X 6.8mm Suspension Balls
Team Losi Racing 6.8mm Flanged Suspension Balls (4): 8IGHT-X /XT (TLR244051)
This is a packet of (4) 6.8mm Flanged Suspension Balls from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Standard 8ight-X 6.8mm Flanged Suspension Balls
Team Losi Racing 1/8 Center Drive Coupler: 8IGHT-X / XT (TLR242028)
This is a Center Drive Coupler from Team Losi Racing for their 8ight-X family of buggies and truggies.
This coupler is used in the center driveline
Out of Stock
$18.25 Inc Tax
Team Losi Racing 4.5x45mm Turnbuckle and Rod Ends (2): 8IGHT-X (TLR244054)
This is a packet of (2) 4.5x45mm Turnbuckle and Rod Ends from Team Losi Racing for their 8IGHT-X racing buggies.
Note: These turnbuckles are directional and notched for easy thread identification.
Note: These turnbuckles are directional and notched for easy thread identification.
Standard 8ight-X rear camber link
Team Losi Racing Aluminium Clamping Servo Saver Nut: 8IGHT-X / XT (TLR341013)
This is an aluminium clamping servo saver nut from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
More secure setting during longer finals
Out of Stock
$17.95 Inc Tax
Avid Racing Concepts Triad HD Wing Mount Buttons (2) (Blue/Silver) (AVD AV10012-BLU)
This is a packet of (2)HD Triad Wing Mount Buttons from Avid RC, designed with strength in mind for those long and grueling 8th scale mains.
These buttons are 2.5mm thick, feature several highlight cuts, and have the Avid "A" laser etched on the surface, making them an attractive and practical addition to any kit.
Features:
Includes:
These buttons are 2.5mm thick, feature several highlight cuts, and have the Avid "A" laser etched on the surface, making them an attractive and practical addition to any kit.
Features:
- Aluminium anodized black with machining highlights and the Avid logo laser etched.
- Designed with strength in mind for 8th scale (2.5mm thick, 16mm OD, and cutouts don't go all the way through).
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market.
- Comes in Black, Blue, Black/Blue, and Black/Gold.
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Add bling while increasing strength and reliability
Out of Stock
$17.95 Inc Tax
Avid Racing Concepts Triad Wing Mount Buttons (2) (Black) (AVD AV1060-BLK)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
Includes:
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Half the weight of the standard Avid 10th wing buttons
Out of Stock
$17.95 Inc Tax
Avid Racing Concepts Triad Wing Mount Buttons (2) (Blue) (AVD AV1060-BLU)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
Includes:
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Half the weight of the standard Avid 10th wing buttons
Avid Racing Concepts Triad Wing Mount Buttons (2) (Green) (AVD AV1060-GRN)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
Includes:
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Half the weight of the standard Avid 10th wing buttons
Avid Racing Concepts Triad Wing Mount Buttons (2) (Red) (AVD AV1060-RED)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
Includes:
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Half the weight of the standard Avid 10th wing buttons
Avid Racing Concepts Triad Wing Mount Buttons (2) (Purple) (AVD AV1060-PUR)
This is a packet of (2) Triad Wing Mount Buttons from Avid RC, that weigh just 0.3g each (half the weight of the standard Avid 10th button), and are the lightest metal button on the market.
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
Includes:
By adding nice silver highlights and laser etched logos they are even more desirable. The Triad button is available in a black, blue, red, green, pink, orange, hard anodize, or purple anodized finish and are designed for use with an M3 flat head screw.
Features:
- Aluminium anodized, silver cut highlights, and the Avid logo laser etched
- Minimal weight design, 0.3g/ea
- M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market
- Available in black, blue, red, green, pink, orange, hard anodize, or purple
Includes:
- 2 x Wing Mount Buttons
- 1 x Avid Mini Decal Sheet
Half the weight of the standard Avid 10th wing buttons
Team Losi Racing Mod 1 Center Plastic Differential Spur Gear (45T):8IGHT (LOSA3562)
This is a Plastic 45 Tooth Mod 1 Center Differential Spur Gear from Team Losi Racing for their electric 8IGHT Buggies.
Fits all electric TLR 8IGHT Buggies
Out of Stock
$17.95 Inc Tax
Team Losi Racing King Pin Bolts (4): 8IGHT-X / XT (TLR244045)
This is a packet of (4) King Pin Bolts from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies.
Standard 8ight-X king-pin bolts
Team Losi Racing Mod 1 Center Differential Spur Gear Plastic (43T):8IGHT-E (LOSA3560)
This is a 43 Tooth Mod 1 Plastic Center Differential Spur Gear from Team Losi Racing for their 8IGHT-E Buggies and truggies.
Fits all TLR 8IGHT Buggies and truggies
Team Losi 6x10x3mm Rubber Sealed Ball Bearing (4) (LOSA6946)
This is a packet of (4) 6mm x 10mm x 3mm bearings from Team Losi Racing used in the steering linkage/servo saver assembly of their 8IGHT range of buggies and truggies.
This set includes:
This set includes:
- Four 6x10x3mm bearings
Four 6x10x3mm bearings
Team Losi Racing Body Post & Tank Mount Set: 8IGHT-X (TLR241031)
This is a Body Post & Tank Mount Set from Team Losi Racing for their 8IGHT-X range of vehicles.
Used when fitting the Proline Bruggy Body to the TLR 8ight-XT
Used when fitting the Proline Bruggy Body to the TLR 8ight-XT
Used with Proline Bruggy Body
Out of Stock
$16.95 Inc Tax
Team Losi Racing Front Shock Shaft: 8IGHT-X (TLR243043)
This is a replacement Front Shock Shaft from Team Losi Racing for their 8IGHT-X racing buggies.
Fits all 8IGHT-X buggies
Team Losi Racing Rear Shock Shaft: 8IGHT-X (TLR243044)
This is a replacement Rear Shock Shaft from Team Losi Racing for their 8IGHT-X racing buggies.
Fits all 8IGHT-X buggies
Team Losi Racing Metal Servo Arm Insert (2) (25T - Futaba) (LOSA99043)
This is a packet of (2) Metal Servo Arm Inserts from Team Losi Racing intended for use with Futaba, ProTek R/C, Highest, Savox, and Orion servos, as well as any servo that uses a 25T spline pattern.
These inserts are installed over the steering and throttle servo output shafts.
These inserts are installed over the steering and throttle servo output shafts.
Fits all 1/8 TLR Kits
Out of Stock
$14.95 Inc Tax
Team Losi Racing 16mm Shock Bladders (4): 8IGHT 3.0 / 4.0 / X / T (TLR243004)
This is a packet of (4) 16mm Shock Bladders from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm 1.2mm Shock Pistons (2): 8IGHT 3.0 / 4.0 / X / T (TLR243010)
This is a packet of (2) 16mm 1.2mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm 1.3mm Shock Pistons (2): 8IGHT 3.0 / 4.0 / X / T (TLR243011)
This is a packet of (2) 16mm 1.3mm Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Team Losi Racing 16mm Split Shock Pistons (2): 8IGHT 3.0 / 4.0 / X / T (TLR243012)
This is a packet of (2) 16mm Split Shock Pistons from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.
These are eight hole pistons, with four 1.2mm holes and four 1.3mm holes.
Fits all TLR 16mm Shocks
Team Losi Racing Lower Shock Cap Seals (4) & X-Ring Seals (8): 8IGHT 3.0 / 4.0 / X / T (TLR243024)
This is a packet of (4) Lower Shock Cap Seals & (8) X-Ring Seals from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Fits all TLR 16mm Shocks
Out of Stock
$13.95 Inc Tax
Team Losi Racing Center Dogbone: 8IGHT 3.0/4.0/X (TLR242002)
This is a replacement Center Dogbone from Team Losi Racing used in the center/rear position on the Losi 8ight 3.0/4.0 & X, and the center/front position on the 8IGHT-E 3.0.
Losi center dogbones eliminate the friction of a CV coupler and reduce the bind caused after the CV coupler wears.
Losi center dogbones eliminate the friction of a CV coupler and reduce the bind caused after the CV coupler wears.
Less binding than CV style driveshaft
Out of Stock
$13.50 Inc Tax
Team Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing (4) (LOSA6948)
This is a packet of (4) 8mm x 14mm x 4mm Flanged Bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 8x14x4mm Flanged Bearings
Four 8x14x4mm flanged bearings
Out of Stock
$13.50 Inc Tax
$22.00
Team Losi Racing Spindle Shims (4): 8IGHT-X / XT (TLR244046)
This is a standard replacement Front Spindle Shims from Team Losi Racing for their 8IGHT-X/XE racing buggies and 8IGHT-XT/XTE racing truggies .
Standard 8ight-X Spindle Shims
Out of Stock
$12.95 Inc Tax
Team Losi Racing Differential Shims (6x11x.2mm):8IGHT (All) (LOSA3501)
This is a packet of (12) 6x11x.2mm Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.
Fits all TLR 8IGHT Buggies and truggies
Out of Stock
$12.50 Inc Tax
Team Losi Racing HD Rod Set: 8X, 8XE 2.0 (TLR244068)
This is a Heavy Duty Rod End Set from Team Losi Racing for their 8X, 8XE 2.0 racing buggies.
Heavy duty rod ends
Team Losi 5x11x4mm Rubber Sealed Ball Bearing (4) (LOSA6947)
This is a packet of (4) 5mm x 11mm x 4mm bearings from Team Losi Racing.
This set includes:
This set includes:
- Four 5x11x4mm bearings
Four 5x11x4mm bearings
Team Losi Racing Rod End Set (12): 8IGHT-X (TLR244040)
This is a packet of (12) Rod Ends from Team Losi Racing for their 8IGHT-X racing buggies.
Standard 8ight-X Rod Ends
Team Losi Racing Drive Pin Set: 8IGHT (All) (LOSA3518)
This is a Drive Pin Set from Team Losi Racing for all their 8IGHT family of racing buggies and truggies.
Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.
Losi now offers a full drive pin kit which includes drive pins for the front and rear center drive shafts, front and rear axle joints, diff pins and hex pins.
Fits all TLR 1/8 Racing buggies and truggies
Team Losi Flat Head Screws, M4x12mm (10) (TLR255013)
This is a packet of ten M4 x 12mm Flat Head Screws from Team Losi.
Fits many models, check your manual first
Team Losi Racing 10mm Wing Spacer: 8ight-X, XE, XT, XTE (TLR240015)
This is a 10mm Wing Spacer from Team Losi Racing for their 8IGHT-X, 8IGHT-XE, 8IGHT-XT, 8IGHT-XTE0 racing buggies and Truggies.
Raises wing into clean air
Out of Stock
$10.95 Inc Tax
Team Losi Racing Differential Case: 8IGHT-XT / XTE (LOSA3500)
This is a Differential Case from Team Losi Racing for their 1/8 8IGHT-X / XE Buggy and 8IGHT-XT/XTE Truggy Nitro and Electric 4WD Off-Road racing Kits.
Fits earlier version TLR kits
Team Losi Racing Gearbox Shims (20):8IGHT (All) (LOSA4452)
This is a packet of (20) Differential shims from Team Losi Racing compatible for the front and back of all their 8IGHT Buggies and Truggies.
This set of Gear Box Shims includes:
This set of Gear Box Shims includes:
- 10 x 14x17x.25mm Shims
- 10 x 14x17x.10mm Shims
Fits all TLR 8IGHT Buggies and truggies
Out of Stock
$10.50 Inc Tax
Team Losi Racing Front Bumper: 8IGHT-X/XE/XT/XTE (TLR241033)
This is a standard replacement Front Bumper from Team Losi Racing for their 8IGHT-X family of racing buggies & truggies..
Standard 8ight-X Front Bumper
Out of Stock
$9.95 Inc Tax
Team Losi Racing 3.5mm X-Ring Seals (8): 8IGHT-X (TLR344033)
This is a packer of (8) 3.5mm X-Ring Seals from Team Losi Racing for their 8IGHT-X racing buggies when using the optional 3.5mm Shock Shaft Conversion Kit (TLR344035).
For when using the 3.5mm conversion kit
Team Losi Racing Pinion Bearing Spacer (4): 8IGHT 4.0 / T / X (TLR242019)
This is a packet of (4) Pinion Bearing Spacer from Team Losi Racing compatible with their 8ight 4.0 and 8IGHT-X buggies & truggies.
Fits TLR 8IGHT 4.0 and X buggies and truggies
Team Losi Racing Adjustable Hinge Pin Brace Insert Set: 8IGHT (All) (LOSA1756)
This is a Packet of (16) Adjustable Hinge Pin Brace Inserts from Team Losi Racing for their 8IGHT family of racing Buggies and Truggies.
Fits all TLR 8ight racing kits
Out of Stock
$7.50 Inc Tax
Avid Racing Concepts Spring Tube Pack (8th Off-Road) (4) (AVD AV1203-TUBE)
This is a packet of (4) 8th scale spring tubes.
Now you can get all your springs organized and kept safe so that wad of springs you have in the corner of your pit box can finally find a home.
Dimensions:
- Outside: Dia. 33.3mm X Ht. 98.6mm
- Inside: Dia. 28.4mm X Ht. 96.5mm
Keep your 1/8 springs safe and tidy
Team Losi Racing 16mm Shock Piston Washer Set (8): 8IGHT 3.0 / 4.0 / X / T ( Copy ) (TLR243014)
This is a packet of (8) 16mm Shock Piston Washers from Team Losi Racing compatible with their 8IGHT family of Buggies and Truggies.
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
Package includes four upper and four lower washers that are installed on the shock shaft, above and below the shock piston.
Fits all TLR 16mm Shocks
Out of Stock
$4.95 Inc Tax
- 1