2wd Grass Hopper, Hornet, Lunchbox, Midnight Pumpkin, Mad Bull
Tamiya TBLE-04S Electronic Speed Controller (TAM 45069)
This is the TBLE-04S Electronic Speed Controller from Tamiya that is Compatible with brushed and brushless motors.
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
Features:
LO/HI Battery Cut-off Information:
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over.
High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected.
Setup is shown by an LED, and the ESC also features two protection functions.
Spcifications:
- Maximum continuous current: 75A
- Input voltage: 6.6V - 7.2V
- Dimensions: 41.5mm x 33.4mm x 18mm
- Weight: 45g (including cables)
Features:
- Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response.
- Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over.
- Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it.
- Features overheating and overload protection functions to help ensure that your equipment avoids damage.
- Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs.
LO/HI Battery Cut-off Information:
- LOW & HIGH Battery Low Voltage Protection Feature:
- LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry)
- HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)
Compatible with brushed and brushless motors
Tamiya 27T Brushed 540 Motor (TAM 51673)
This is a 27T Brushed 540 Motor from Tamiya which is supplied with a lot of their 1/10 RC kits.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
Supplied with most Tamiya RC Kits
Tamiya Chassis - Grasshopper II, Super Hornet (TAM 0335092)
This is a Chassis from Tamiya supplied with their Grasshopper II and Super Hornet RC Kits.
Restore your old vintage kits
Tamiya Philips (+) Screwdriver Pro (Large) (TAM 74120)
This is a Large Philips (+) Screwdriver Pro from Tamiya.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
- Precision tooled magnetic bit
- For use with PH2 (3-3.5mm; JIS M3-M3.5) plus (+) head screws.
- Bit diameter/length: 4mm / 100mm
- Grip diameter/length: 28mm / 98mm
Perfect for building Tamiya RC Models
Tamiya Rear Tire Bag (1 Pair) - Grasshopper/Sand Scorcher (TAM 9805081)
This is a packet of (2) rear tires from Tamiya supplied with their Grasshopper and Sand Scorcher RC Kits.
Restore your old vintage grasshopper
Tamiya Philips (+) Screwdriver Pro (Medium) (TAM 74119)
This is a Medium Philips (+) Screwdriver Pro from Tamiya.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
- Precision tooled magnetic bit
- For use with PH1 (2-2.6mm; JIS M2-M2.6) plus (+) head screws.
- Bit diameter/length: 4mm / 100mm
- Grip diameter/length: 26mm / 83mm
A must for any Tamiya Enthusiast
Tamiya Roll bar: Clod Buster / Bull Head / Midnight Pumpkin (TAM 9335041)
This is the Roll Bar from Tamiya designed for their Clod Buster, Bull Head, Midnight Pumpkin RC Kits.
May fit other cars, please check your manual for compatibility.
May fit other cars, please check your manual for compatibility.
Add new parts for your old car
Tamiya Off-Road Front Rib Tires (2WD/Front): Hornet, Frog, Sand Scorcher (TAM 9805033)
This is a pair of Front Tires from Tamiya for use on the Tamiya Hornet, Frog and Sand Scorcher Buggies.
Features:
- Direct replacement parts
- Ribbed black rubber
Packet Includes:
- Two front ribbed buggy tires
Specifications:
- Inner Diameter: 35mm
- Outer Diameter: 72mm
- Width overall: 20.34mm
Found on a number of Tamiya 2wd kits
Tamiya Motor Connector Plugs (10) (TAM 50245)
This is packet of (10) Tamiya Snap Connectors For 540 Brushed Motor.
This RC Snap Connector Set is used for Tamiya cars that come with 540, brushed type electric motors, and ESC's (Electronic Speed Controls), but can also be used on other brand motors.
The connectors in this set can be used to replace worn out connectors.
Key Features:
- For: 540 Brushed Motor
- Material: Metal / Rubber
- Color: Silver
What's In The Box?
- 10 Male connectors
- 10 Male rubber boots
- 10 Female connectors
- 10 Female rubber boots
Includes enough for 5 motors
- 1