4wd Clod Buster, Bullhead
Tamiya TEU-201BK Electronic Speed Controller (TAM 45073)
This is the TEU-201BK Twin Motor Electronic Speed Controller from Tamiya that is Compatible with brushed motors.
This ESC is designed for dual motor builds and features smooth, predictable power output.
Specifications:
This ESC is designed for dual motor builds and features smooth, predictable power output.
Specifications:
- Maximum continuous current: 80A
- Input voltage: 6.6V - 7.2V
- Dimensions: 45.9mm x 34.7mm x 26.5mm
- Weight: 75g (including cables)
- Output – Forward 100%, reverse 50%
- Tamiya JST type battery connector
Twin Motor ESC
Tamiya Chassis: Clod Buster / Bullhead (TAM 0335085)
This is a replacement chassis from Tamiya for their Clod Buster and Bullhead monster trucks.
Replace that old chassis
Tamiya Wheel Bag (2): Clod Buster / Bull Head (TAM 9335085)
This is the Wheel Bag from Tamiya designed for their Clod Buster and Bull Head RC Kits.
May fit other cars, please check your manual for compatibility.
May fit other cars, please check your manual for compatibility.
Add new parts for your old car
Tamiya 27T Brushed 540 Motor (TAM 51673)
This is a 27T Brushed 540 Motor from Tamiya which is supplied with a lot of their 1/10 RC kits.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
These are ideal for basic radio control vehicle use. Features factory installed motor wires with bullet connectors.
Supplied with most Tamiya RC Kits
Tamiya L Parts (Chrome): Clod Buster (TAM 9115146)
This is the "L" parts from Tamiya for their Clod Buster monster trucks.
Engine blower assembly
Tamiya C Parts: Clod Buster (TAM 0005295)
This is the "C" parts from Tamiya for their Clod Buster monster trucks.
Lower arms
Tamiya B Parts: Clod Buster (TAM 0005294)
This is the "B" parts from Tamiya for their Clod Buster monster trucks.
Gearbox case & wheel adapters
Tamiya H Parts (Chrome): Clod Buster (TAM 0004894)
This is the "H" parts from Tamiya for their Clod Buster monster trucks.
Grille, roll bar and light
Out of Stock
$22.50 Inc Tax
Tamiya Screw Bag B: Bull Head (TAM 9465367)
This is the screw bag 'B' from Tamiya for their Bull Head vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Tamiya Philips (+) Screwdriver Pro (Large) (TAM 74120)
This is a Large Philips (+) Screwdriver Pro from Tamiya.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
- Precision tooled magnetic bit
- For use with PH2 (3-3.5mm; JIS M3-M3.5) plus (+) head screws.
- Bit diameter/length: 4mm / 100mm
- Grip diameter/length: 28mm / 98mm
Perfect for building Tamiya RC Models
Tamiya J Parts (Chrome): Clod Buster (TAM 9115021)
This is the "J" parts from Tamiya for their Clod Buster monster trucks.
Front and Rear bumpers
Out of Stock
$18.95 Inc Tax
Tamiya Screw Bag A: Bull Head (TAM 9465366)
This is the screw bag 'A' from Tamiya for their Bull Head vehicles.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts, Washers and Bolts for Tamiya cars.
Some common Nuts and Bolts for Tamiya cars
Out of Stock
$18.00 Inc Tax
Tamiya Philips (+) Screwdriver Pro (Medium) (TAM 74119)
This is a Medium Philips (+) Screwdriver Pro from Tamiya.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
This plus (+) head screwdriver will make a great addition to your toolbox! It features a high-precision CNC machined bit which helps prevent damage to screw heads.
An ergonomically-designed 2-color polypropylene (PP) and elastomer grip offers secure control while using.
- Precision tooled magnetic bit
- For use with PH1 (2-2.6mm; JIS M2-M2.6) plus (+) head screws.
- Bit diameter/length: 4mm / 100mm
- Grip diameter/length: 26mm / 83mm
A must for any Tamiya Enthusiast
Tamiya Roll bar: Clod Buster / Bull Head / Midnight Pumpkin (TAM 9335041)
This is the Roll Bar from Tamiya designed for their Clod Buster, Bull Head, Midnight Pumpkin RC Kits.
May fit other cars, please check your manual for compatibility.
May fit other cars, please check your manual for compatibility.
Add new parts for your old car
Tamiya Motor Connector Plugs (10) (TAM 50245)
This is packet of (10) Tamiya Snap Connectors For 540 Brushed Motor.
This RC Snap Connector Set is used for Tamiya cars that come with 540, brushed type electric motors, and ESC's (Electronic Speed Controls), but can also be used on other brand motors.
The connectors in this set can be used to replace worn out connectors.
Key Features:
- For: 540 Brushed Motor
- Material: Metal / Rubber
- Color: Silver
What's In The Box?
- 10 Male connectors
- 10 Male rubber boots
- 10 Female connectors
- 10 Female rubber boots
Includes enough for 5 motors
- 1